Anton Lopez-Roman
Research Subjects
Anton Lopez-Roman has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Cristina Prieto
Department of Energy Engineering, Universidad de Sevilla, 41092 Sevilla, Spain
8 shared publications - Luisa F. Cabeza
GREiA Research Group, University of Lleida, Lleida, Spain
5 shared publications - Pablo D. Tagle-Salazar2 shared publications
Andreas Rosenstiel
1 shared publication- Christian Sattler
Deutsches Zentrum für Luft- und Raumfahrt e. V. (DLR)
1 shared publication Esther Bartolí
1 shared publication
Latest Publications
- 1 January 2026
- Published by Editorial Universidad de Sevilla
- p. 471-486
Aplicación de un ciclo de mejora en el aula en la asignatura energía solar en procesos térmicos
El presente capítulo describe el diseño, desarrollo y evaluación de un Ciclo de Mejora en el Aula (CIMA) aplicado en la asignatura energía solar en procesos térmicos del máster en sistemas de energía térmica. El ciclo se centra en mejorar la comprensión de los captadores solares y su análisis térmico, contenidos tradicionalmente abordados mediante clases magistrales. Para ello, se implementó un modelo metodológico orientado al aprendizaje activo, que incorpora la exploración de ideas previas, actividades de contraste, resolución guiada de problemas y un cuestionario inicial-final. Los resultados muestran una mejora en la comprensión conceptual del alumnado y en su capacidad para interrelacionar contenidos y aplicarlos a contextos técnico-profesionales. Asimismo, se observa un desplazamiento del foco hacia una comprensión más estructural y global de la materia, asociado al mayor peso de las actividades de aprendizaje activo y a la reorganización del tiempo de aula, aspecto clave a considerar en futuras iteraciones del ciclo.
- 1 January 2026
- Published by Editorial Universidad de Sevilla
- p. 471-486
Aplicación de un ciclo de mejora en el aula en la asignatura energía solar en procesos térmicos
El presente capítulo describe el diseño, desarrollo y evaluación de un Ciclo de Mejora en el Aula (CIMA) aplicado en la asignatura energía solar en procesos térmicos del máster en sistemas de energía térmica. El ciclo se centra en mejorar la comprensión de los captadores solares y su análisis térmico, contenidos tradicionalmente abordados mediante clases magistrales. Para ello, se implementó un modelo metodológico orientado al aprendizaje activo, que incorpora la exploración de ideas previas, actividades de contraste, resolución guiada de problemas y un cuestionario inicial-final. Los resultados muestran una mejora en la comprensión conceptual del alumnado y en su capacidad para interrelacionar contenidos y aplicarlos a contextos técnico-profesionales. Asimismo, se observa un desplazamiento del foco hacia una comprensión más estructural y global de la materia, asociado al mayor peso de las actividades de aprendizaje activo y a la reorganización del tiempo de aula, aspecto clave a considerar en futuras iteraciones del ciclo.
- Open Access
- 5 October 2025
- Published by Elsevier in Applied Thermal Engineering
- Vol. 281
Dynamic heat transfer model for thermal energy storage using metal wool–phase change material composites
- 5 October 2025
- Published by Elsevier in Applied Thermal Engineering
- Vol. 281
Open AccessDynamic heat transfer model for thermal energy storage using metal wool–phase change material composites
- Open Access
- 5 July 2025
- Published by Elsevier in Applied Thermal Engineering
- Vol. 278
A novel two-dimensional effectiveness-NTU method for high-temperature cascade latent heat storage
- 5 July 2025
- Published by Elsevier in Applied Thermal Engineering
- Vol. 278
Open AccessA novel two-dimensional effectiveness-NTU method for high-temperature cascade latent heat storage
- Open Access
- 8 October 2024
- Published by Elsevier in Renewable Energy
- Vol. 237
Failure analysis of the leakage and ignition of heat transfer fluid in a concentrating solar power (CSP) pilot plant
- 8 October 2024
- Published by Elsevier in Renewable Energy
- Vol. 237
Open AccessFailure analysis of the leakage and ignition of heat transfer fluid in a concentrating solar power (CSP) pilot plant
- 1 October 2023
- Published by Elsevier in Renewable Energy
- Vol. 219
A transient heat losses model for two-tank storage systems with molten salts
- 1 October 2023
- Published by Elsevier in Renewable Energy
- Vol. 219
A transient heat losses model for two-tank storage systems with molten salts
- 18 May 2023
- Published by Elsevier in Renewable Energy
- Vol. 212, 492-499
Evaluation of cross-contamination in indirect thermal storage system in concentrated solar plants
- 18 May 2023
- Published by Elsevier in Renewable Energy
- Vol. 212, 492-499
Evaluation of cross-contamination in indirect thermal storage system in concentrated solar plants
- Open Access
- 25 March 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (7) , 3672
Life Cycle Assessment (LCA) of a Concentrating Solar Power (CSP) Plant in Tower Configuration with and without Thermal Energy Storage (TES)
Despite the big deployment of concentrating solar power (CSP) plants, their environmental evaluation is still a pending issue. In this paper, a detailed life cycle assessment (LCA) of a CSP tower plant with molten salts storage in a baseload configuration is carried out and compared with a reference CSP plant without storage. Results show that the plant with storage has a lower environmental impact due to the lower operational impact. The dependence on grid electricity in a CSP tower plant without storage increases its operation stage impact. The impact of the manufacturing and disposal stage is similar in both plants. When analyzed in detail, the solar field system and the thermal energy storage (TES) and heat transfer fluid (HTF) systems are the ones with higher impact. Within the storage system, the molten salts are those with higher impact. Therefore, in this study the impact of the origin of the salts is evaluated, showing that when the salts come from mines their impact is lower than when they are synthetized. Results show that storage is a key element for CSP plants not only to ensure dispatchability but also to reduce their environmental impact.
- 25 March 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (7) , 3672
Open AccessLife Cycle Assessment (LCA) of a Concentrating Solar Power (CSP) Plant in Tower Configuration with and without Thermal Energy Storage (TES)
Despite the big deployment of concentrating solar power (CSP) plants, their environmental evaluation is still a pending issue. In this paper, a detailed life cycle assessment (LCA) of a CSP tower plant with molten salts storage in a baseload configuration is carried out and compared with a reference CSP plant without storage. Results show that the plant with storage has a lower environmental impact due to the lower operational impact. The dependence on grid electricity in a CSP tower plant without storage increases its operation stage impact. The impact of the manufacturing and disposal stage is similar in both plants. When analyzed in detail, the solar field system and the thermal energy storage (TES) and heat transfer fluid (HTF) systems are the ones with higher impact. Within the storage system, the molten salts are those with higher impact. Therefore, in this study the impact of the origin of the salts is evaluated, showing that when the salts come from mines their impact is lower than when they are synthetized. Results show that storage is a key element for CSP plants not only to ensure dispatchability but also to reduce their environmental impact.
- Open Access
Improvement of Phase Change Materials (PCM) Used for Solar Process Heat Applications
The high intermittency of solar energy is still a challenge yet to be overcome. The use of thermal storage has proven to be a good option, with phase change materials (PCM) as very promising candidates. Nevertheless, PCM compounds have typically poor thermal conductivity, reducing their attractiveness for commercial uses. This paper demonstrates the viability of increasing the PCM effective thermal conductivity to industrial required values (around 4 W/m·K) by using metal wool infiltrated into the resin under vacuum conditions. To achieve this result, the authors used an inert resin, decoupling the specific PCM material selection from the enhancement effect of the metal wools. To ensure proper behavior of the metal wool under standard industrial environments at a broad range of temperatures, a set of analyses were performed at high temperatures and an inert atmosphere, presenting a thorough analysis of the obtained results.
Open AccessImprovement of Phase Change Materials (PCM) Used for Solar Process Heat Applications
The high intermittency of solar energy is still a challenge yet to be overcome. The use of thermal storage has proven to be a good option, with phase change materials (PCM) as very promising candidates. Nevertheless, PCM compounds have typically poor thermal conductivity, reducing their attractiveness for commercial uses. This paper demonstrates the viability of increasing the PCM effective thermal conductivity to industrial required values (around 4 W/m·K) by using metal wool infiltrated into the resin under vacuum conditions. To achieve this result, the authors used an inert resin, decoupling the specific PCM material selection from the enhancement effect of the metal wools. To ensure proper behavior of the metal wool under standard industrial environments at a broad range of temperatures, a set of analyses were performed at high temperatures and an inert atmosphere, presenting a thorough analysis of the obtained results.
- 1 October 2020
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 45 (49) , 26104-26116
Performance analysis of operational strategies for monolithic receiver-reactor arrays in solar thermochemical hydrogen production plants
- 1 October 2020
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 45 (49) , 26104-26116
Performance analysis of operational strategies for monolithic receiver-reactor arrays in solar thermochemical hydrogen production plants