Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Zhenlin Pei has a total of 62 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Graphene-Based Interconnect Exploration for FPGA Design and Optimization Towards the End of the Roadmap

    by Zhenlin Pei, Sheng Lu, Liuting Shang, Sungyong Jung, Qilian Liang, Chenyun Pan

    The emerging graphene interconnect technology is expected to be a promising alternative to traditional interconnect technologies due to its superior conductivity. Because of the dominant impact of global routing on the overall performance of a widely used application, the Field-Programmable Gate Array (FPGA), this work investigates the potential advantage of using graphene-based interconnects to replace conventional copper (Cu) for global routing. Furthermore, a scalability analysis is performed, and the effects of technology node scaling from 7 nm to 1.5 nm are evaluated using lateral gate-all-around field-effect transistors (LGAAFETs) within the proposed system-technology co-design (STCO) framework. Key material-level parameters, including the mean free path (MFP), contact resistance, and the number of graphene layers, are systematically analyzed. Benchmark simulations demonstrate that a 32% improvement in the energy-delay product (EDP) is achieved with graphene-based interconnects compared to Cu counterparts at the 7 nm technology node, and an additional 46% reduction is observed at the 1.5 nm technology node. It is important to note that this work is an exploratory STCO study incorporating cross-layer design considerations, with a focus on long-term trends rather than short-term manufacturability.

  • Open Access

    Reliability-Driven Sneak Path Current Modeling and Optimization for Passive Memristor Crossbar Arrays

    by Zhenlin Pei, Shah Zayed Riam, Kyle Mooney, Chenyun Pan, Na Gong, Jinhui Wang

  • SPORT: Spherical-PSNR–Optimized tRuncaTion for Power-Efficient 360-Degree Video Systems

    by Md. Sajjad Hossain, Hasibur Rahman Hemel, Kyle Mooney, Yiwen Xu, William Oswald, Mario Renteria-Pinon, Hritom Das, Zhenlin Pei, Jinhui Wang, Na Gong

  • Open Access

    System Scenario-Based Design of the Last-Level Cache in Advanced Interconnect-Dominant Technology Nodes

    by Mahta Mayahinia, Tommaso Marinelli, Zhenlin Pei, Hsiao-Hsuan Liu, Chenyun Pan, Zsolt Tokei, Francky Catthoor, Mehdi Tahoori

    Feature size reduction of the front End of the Line (FEoL) and back End of the Line (BEoL) elements, i.e., transistors and interconnects, has been the main enabler of the next-generation computation systems. The decreasing trend of the cross-sectional area of the interconnect in advanced technology nodes, however, comes along with a drastic increase in the resistive parasitic, substantially impacting the overall energy efficiency and performance of the computer system. Mitigation of the high parasitic resistance within an advanced-node static RAM (SRAM)-based last-level cache (LLC) is the main target of this article. To achieve this target, we augment the LLC interconnect with some degree of reconfiguration by utilizing a dynamic segmented bus (DSB). With DSB, the interconnect segments that are most actively used for a given workload can be shortened, on average, contributing to a smaller capacitive load. Hence, the efficient reconfiguration of an LLC interconnect strongly depends on the LLC demands of the application. To account for this workload dependency, we design the required microarchitectural support in an end-to-end application-to-technology flow. By optimizing the overhead of DSB switches and additional hardware modules, the SRAM-based LLC with DSB-augmented intra-macro interconnect achieves 33% energy savings and 16% reduction in total access time across eight representative workloads, with a negligible area overhead of less than 0.4%.


  • Interconnect/Memory Co-Design and Co-Optimization Using Differential Transmission Lines

    by Zhenlin Pei, Hsiao-Hsuan Liu, Mahta Mayahinia, Mehdi Tahoori, Francky Catthoor, Zsolt Tokei, Prashant Dubey, Chenyun Pan

    As technology scales down, the performance–power–area (PPA) of static random access memory (SRAM) is increasingly constrained by interconnects due to the presence of large parasitic capacitance and resistance within these structures. This article presents a co-optimization and co-design framework that integrates technology, interconnect, circuit, cache memory, and workload to optimize the overall PPA of the computing cache system through various emerging interconnect technologies under software and hardware conditions. Moreover, we present the differential transmission line (DTL), which is utilized as a hybrid with conventional wires with repeater insertion. The proposed methodology enables the identification of the optimal design, thereby facilitating the reduction of interconnect energy and delay, considering synthetic/realistic workloads and comparing DTL against traditional repeater insertion methods based on metrics of PPA, including the energy–delay–area product (EDAP) and energy–delay product (EDP), for the computing cache system. A thorough design space exploration is conducted, utilizing validated experimental subarrays at the deep scale across state-of-the-art technology nodes. Moreover, the case study assesses a range of cache system parameters, emphasizing the potential of DTL interconnect technologies to enhance cache memory PPA.


  • Graphene-Based FPGA Design and Optimization at the 7nm FinFET Technology Node

    by Sheng Lu, Zhenlin Pei, Liuting Shang, Sungyong Jung, Qilian Liang, Chenyun Pan

    Emerging graphene-based interconnects exhibit excellent conductivity, rendering them a promising alternative to traditional interconnect materials. The energy consumption and delay of field-programmable gate arrays (FPGAs) are significantly influenced by global routing, which presents a compelling opportunity for graphene interconnect technology. This study examines the potential benefits of replacing copper (Cu), the conventional interconnect material, with graphene. Three interconnect technologies are examined: Cu interconnects, improved graphene-capped Cu interconnects, and thick graphene. An interconnect/system co-design framework is designed to systematically evaluate their performance differences. Concerning graphene material-level parameters, our focus is on the impact of graphene contact resistance and mean-free-path on performance. Benchmark simulations indicate that graphene-based interconnects can enhance the energy-delay product of circuits by up to 32% in comparison to conventional Cu interconnects at the 7nm FinFET technology node.


  • Dynamic Segmented Bus for Energy-Efficient Last-Level Cache in Advanced Interconnect-Dominant Nodes

    by Mahta Mayahinia, Tommaso Marinelli, Zhenlin Pei, Hsiao-Hsuan Liu, Chenyun Pan, Zsolt Tokei, Francky Catthoor, Mehdi B. Tahoori

    To deal with stagnated performance and energy improved by successive technology scaling, system-technology co-optimization (STCO) comes as a rescue which involves the co-optimization of the important system parameters from the high-level application all the way down to the low-level technology. This article addresses the interconnect dominance issue in advanced nodes as a bottleneck in energy-efficient static RAM (SRAM)-based last-level cache (LLC) and aims to mitigate it through an STCO mechanism. Our main approach in this work is the utilization of a workload-aware controlled dynamic segmented bus (DSB) as the intramacro (interbanks) interconnect. Based on our results, our approach can improve the energy efficiency of the SRAM-based LLC by an average of 35%.


  • Ultra-Scaled E-Tree-Based SRAM Design and Optimization With Interconnect Focus

    by Zhenlin Pei, Hsiao-Hsuan Liu, Mahta Mayahinia, Mehdi B. Tahoori, Francky Catthoor, Zsolt Tőkei, Dawit Burusie Abdi, James Myers, Chenyun Pan

    SRAM performance is highly dominated by interconnects as technology scales down because of the significant parasitic resistance and capacitance in the interconnect. This paper introduces a framework for the co-design of technology, interconnect, and cache memory with tag array overhead, to optimize the performance of cache memory using a variety of emerging interconnect technologies. In addition, we introduce an innovative E-Tree interconnect aimed at further decreasing the average interconnect length with the consideration of realistic workloads and benchmark against its traditional H-Tree counterparts in terms of various performance metrics, such as energy-delay-area product (EDAP) or energy-delay product (EDP) in the SRAM cache memory system. A comprehensive investigation of design space is conducted, employing realistic, deeply scaled subarray designs across a range of cutting-edge technology nodes. Furthermore, the case study examines various cache memory system design parameters to assess the true potential of emerging interconnect technologies in achieving optimal performance at the cache memory system.


  • Future Design Direction for SRAM Data Array: Hierarchical Subarray With Active Interconnect

    by Hsiao-Hsuan Liu, Carlo Gilardi, Shairfe M. Salahuddin, Zhenlin Pei, Pieter Schuddinck, Yang Xiang, Pieter Weckx, Geert Hellings, Marie Garcia Bardon, Julien Ryckaert, et al.

    In sub 10 nm nodes, the growing dominance of interconnects in chips poses challenges in designing large-size static random-access memory (SRAM) subarrays. The main issue is the write failure problem arising from the increased resistance and capacitance for bitline (BL) and wordline (WL). To tackle this issue, the SRAM subarray design incorporates conventional (Conv.) divided WL and divided BL techniques based on 14-Å-compatible (A14) nanosheet (NS) technology. This approach allows for various subarray sizes with successful write operations, resulting in improved subarray-level performance and power (PP). However, the additional logic gates come with an area penalty that may degrade the overall performance, power, and area (PPA) at the macro level due to increased inter-subarray interconnect overhead. To overcome this limitation, the active interconnect (AIC) design is proposed with the features of fabricating another or multiple active regions at the back-end of line (BEOL) layers. By moving these extra logic gates from front-end of line to BEOL in the AIC divided subarray design, the area penalty is significantly mitigated without compromising PP compared to the standard (Std.) and Conv. divided counterparts. To achieve this concept, carbon nanotube gate-all-around transistor is explored as potential BEOL-compatible device. In this research, a comprehensive design-technology co-optimization analysis is conducted to verify the value and potential benefits of up to 65% macro-level energy-delay-area product improvement by AIC divided subarray design compared to the Std. subarray design.


  • CFET SRAM With Double-Sided Interconnect Design and DTCO Benchmark

    by Hsiao-Hsuan Liu, Pieter Schuddinck, Zhenlin Pei, Lynn Verschueren, Hans Mertens, Shairfe M. Salahuddin, Gaspard Hiblot, Yang Xiang, Boon Teik Chan, Sujith Subramanian, et al.

    Complementary field-effect transistor (CFET) has successfully boosted the area scaling of static random access memory (SRAM) bitcell due to its stacked architecture. However, this architecture introduces taller via connection from the frontside back-end-of-line (BEOL) signals to the bottom pass-gate devices, resulting in increased bitline (BL) and wordline (WL) capacitances ( $\textit{C}_{\text{BL}}$ and $\textit{C}_{\text{WL}}$ ) compared to nonstacked SRAMs. Previous research has reported that the higher parasitic capacitance hinders the power and performance gains between nodes. In this work, as a hypothetical device option aside from sequential and monolithic CFET, hybrid CFET is introduced in SRAM design with the features of double-sided interconnect design in 3-Å-compatible technology (A3). To assess its potential value in future SRAM roadmap, a comprehensive design technology co-optimization (DTCO) “what-if analysis” has been conducted. Hybrid CFET enables relaxation of metal width and shorter via connections in SRAM design compared to previous approaches. Therefore, A3 hybrid CFET SRAM can provide up to 41%, 25%, 35%, 32%, and 45 mV improvements of $\textit{R}_{\text{WL}}$ , $\textit{C}_{\text{BL}}$ , $\textit{C}_{\text{WL}}$ , read speed, and write margin, respectively, compared to sequential and monolithic counterparts. Moreover, it also exhibits 77% energy–delay–area product enhancement compared to 14-Å-compatible nanosheet technology at the macro level (128-MB cache). These compelling results motivate further research and development of the process flow for hybrid CFET devices in SRAM technology in the future.