Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Mohammed Azam Ali has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optimizing Ammonia Detection with a Polyaniline−Magnesia Nano Composite

    by Sharanabasava V. Ganachari, Fatheali A. Shilar, Veerabhadragouda B. Patil, T. M. Yunus Khan, C. Ahamed Saleel, Mohammed Azam Ali

    Polyaniline−magnesia (PANI/MgO) composites with a fibrous nanostructure were synthesized via in situ oxidative polymerization, enabling uniform MgO integration into the polyaniline matrix. These composites were characterized using FTIR spectroscopy to analyze intermolecular bonding, XRD to assess crystallographic structure and phase purity, and SEM to examine surface morphology and topological features. The resulting PANI/MgO nanofibers were utilized to develop ammonia (NH3) gas-sensing probes with evaluations conducted at room temperature. The study addresses the critical challenge of achieving high sensitivity and selectivity in ammonia detection at low concentrations, which is a problem that persists in many existing sensor technologies. The nanofibers demonstrated high selectivity and optimal sensitivity for ammonia detection, which was attributed to the synergistic effects between the polyaniline and MgO that enhance gas adsorption. Furthermore, the study revealed that the MgO content critically influences both the morphology and the sensing performance, with higher MgO concentrations improving sensor response. This work underscores the potential of PANI/MgO composites as efficient and selective ammonia sensors, highlighting the importance of MgO content in optimizing material properties for gas-sensing applications.


  • Application of transition metal doped in boron carbide/graphene heterostructures as an electrode for supercapacitors

    by Maryam Hussein Abdulameer, Aiham O. Altayeh, Ghassan E. Alkinani, Prakash Kanjariya, Anjan Kumar, Mamata Chahar, Suman Saini, Sultan Alshehery, Saiful Islam, Mohammed Azam Ali


  • Open Access

    Exploring the Potential of Promising Sensor Technologies for Concrete Structural Health Monitoring

    by Fatheali A. Shilar, Sharanabasava V. Ganachari, Veerabhadragouda B. Patil, T. M. Yunus Khan, Abdul Saddique Shaik, Mohammed Azam Ali

    Structural health monitoring (SHM) is crucial for maintaining concrete infrastructure. The data collected by these sensors are processed and analyzed using various analysis tools under different loadings and exposure to external conditions. Sensor-based investigation on concrete has been carried out for technologies used for designing structural health monitoring sensors. A Sensor-Infused Structural Analysis such as interfacial bond-slip model, corroded steel bar, fiber-optic sensors, carbon black and polypropylene fiber, concrete cracks, concrete carbonation, strain transfer model, and vibrational-based monitor. The compressive strength (CS) and split tensile strength (STS) values of the analyzed material fall within a range from 26 to 36 MPa and from 2 to 3 MPa, respectively. The material being studied has a range of flexural strength (FS) and density values that fall between 4.5 and 7 MPa and between 2250 and 2550 kg/m3. The average squared difference between the predicted and actual compressive strength values was found to be 4.405. With cement ratios of 0.3, 0.4, and 0.5, the shear strength value ranged from 4.4 to 5.6 MPa. The maximum shear strength was observed for a water–cement ratio of 0.4, with 5.5 MPa, followed by a water–cement ratio of 0.3, with 5 MPa. Optimizing the water–cement ratio achieves robust concrete (at 0.50), while a lower ratio may hinder strength (at 0.30). PZT sensors and stress-wave measurements aid in the precise structural monitoring, enhanced by steel fibers and carbon black, for improved sensitivity and mechanical properties. These findings incorporate a wide range of applications, including crack detection; strain and deformation analysis; and monitoring of temperature, moisture, and corrosion. This review pioneers sensor technology for concrete monitoring (Goal 9), urban safety (Goal 11), climate resilience (Goal 13), coastal preservation (Goal 14), and habitat protection (Goal 15) of the United Nations’ Sustainable Development Goals.


  • Open Access

    A Comprehensive Study of the Effects of Various Operating Parameters on a Biogas-Diesel Dual Fuel Engine

    by M. Feroskhan, Saleel Ismail, Gobinath Natarajan, Sreekanth Manavalla, T. M. Yunus Khan, Shaik Dawood Abdul Khadar, Mohammed Azam Ali

    Alternative fuels are found to be the most promising solution to the problem of conventional IC engine pollution because their use curtails its huge emissions without exerting a negative impact on its performance. In this research, a conventional compression ignition engine is investigated by operating it with the combination of simulated biogas and neat diesel under a dual fuel mode of operations. The simulated biogas in the current work comprises different proportions of methane and carbon dioxide in the mixture. The full factorial approach in this work involved studying the effects of parameters such as biogas flow rate, composition, intake temperature, torque, and methane enrichment (complete removal of CO2 from biogas) on the engine performance, emissions, and combustion indices with an extensive number of experiments. It is witnessed from the research that biogas is capable of providing a maximum of 90% of the overall energy input, while the CI engine operates under dual fuel mode. Under the dual fuel mode of operation involving biogas, a significant amount of reductions are witnessed in secondary fuel consumption (67%), smoke (75%), and NOx (55%) emissions. At low flow rates, biogas is found to improve brake thermal efficiency (BTE), whereas it reduces hydrocarbon and carbon monoxide emissions. Methane enrichment resulted in more diesel substitution by 5.5% and diminishes CO and HC emissions by 5% and 16%, respectively. Increasing the intake temperature caused an increase in thermal efficiency (2%) and a reduction in diesel consumption (~35%), and it curtailed all emission elements except NOx.


  • Open Access

    Risk Factors Assessment of Musculoskeletal Disorders among Professional Vehicle Drivers in India Using an Ordinal Priority Approach

    by Gajender Sharma, Shafi Ahmad, Z. Mallick, Zahid A. Khan, Ajith Tom James, Mohammad Asjad, Irfan Anjum Badruddin, Sarfaraz Kamangar, Syed Javed, Azam Ali Mohammed, et al.

    Professional driving involves sitting in uncomfortable positions, navigating difficult terrain and roads, and occasionally conducting small repairs and other auxiliary transportation duties while at work for long periods. Drivers who engage in these activities may develop a variety of musculoskeletal disorders (MSDs). MSDs in professional drivers are accompanied by several risk factors. In this study, the various risk factors for MSD have been identified through the literature reviews, discussions with professional drivers, and consultations with ergonomics specialists. This study employed the ordinal priority approach (OPA), a multi-criteria decision-making (MCDM) technique, to rank the identified risk variables for MSD in order of importance. The same OPA method has also been used to identify the group of professional drivers who use eight different types of vehicles and are more likely to develop MSDs. The analyses findings show that the five main risk factors for MSDs among drivers are prolonged sitting, restricted posture, working hours, alcohol consumption, and uncomfortable seating. Additionally, among all drivers regarded as professionals, truck drivers are found to be the most at risk. For the study’s conclusions to be validated, a sensitivity analysis was also carried out. The results of this study are anticipated to help formulate strategies for lowering these hazards through the ergonomic design of drivers’ cabins by automobile OEMs (Original Equipment Manufacturers) and vehicle scheduling by concerned transportation organizations to reduce driver tiredness.


  • Open Access

    Exergy Analysis of a CI Engine Operating on Ternary Biodiesel Blends

    by Sreekanth Manavalla, Abhishek Chaudhary, Shreyash Hemant Panchal, Saleel Ismail, Feroskhan M, T. M. Yunus Khan, Syed Javed, Mohammed Azam Ali

    Exergy analysis is carried out on a single-cylinder CI engine fueled with biodiesel blends of palm, jatropha and cottonseed oils. This is to identify the blends with high exergy destruction. To this end, experimental and analytical methods were adopted. Three types of biodiesel blends incorporated in this study are primary, binary and ternary. The load was varied as an independent parameter, and mass flow rates of air and fuel, flue gas composition, etc., were measured during the study. Moreover, the chemical composition of the fuel blends and flue gas, as well as their flow rates, were used to determine the total exergy. The output parameters determined were 1st and 2nd law efficiency and fuel exergy destruction under all loading conditions. The inference obtained from the experiment suggests minutely higher 1st law efficiency for the biodiesel blends. Increasing the blending ratio led to an increase in efficiency indices.


  • Open Access

    Temperature Impact on Reverse Osmosis Permeate Flux in the Remediation of Hexavalent Chromium

    by Ihab Shigidi, Ali E. Anqi, Abubakar Elkhaleefa, Azam Mohamed, Ismat H. Ali, Eid I. Brima

    Reverse osmosis technique was applied in removing hexavalent chromium ions from artificial wastewater. Different operating conditions were studied to monitor the separation process using commercial Reverse Osmosis BW30XFR membrane. Different concentrations of hexavalent chromium; 5, 30, and 100 ppm were tested. Samples were subjected to incrementally increasing operating pressure; 10, 30, and 45 bar and flow rates; 2.2, 3.4, and 4.5 L/min under various temperatures; 25, 35, 45, and 55 °C. Collected permeate and concentrations were measured after each experiment using a UV spectrophotometer. Results obtained presented a higher rejection percentage at lower feed concentrations with a value up to 99.8% for 5 ppm in comparison to 94.3% for 30 ppm and 77.2% for 100 ppm concentration due to concentration polarization; however, it showed no effect of increasing operating flow rates. Moreover, the increase in feed temperature from 25 to 55 °C had positively increased permeate flux to more than 300 times. The permeate flux at 25 °C is recorded for all tested samples in the range of 30 to 158 kg/h·m2, this range has risen at 55 °C under the same conditions to the range of 70 to 226 kg/h·m2, indicating alteration within the membrane pore size due to temperature increase and high applied pressure concluding high sensitivity of polymeric membranes towards changing permeate flow rate with increasing temperatures.


  • Open Access

    Evaluating Critical Influencing Factors of Desalination by Membrane Distillation Process—Using Multi-Criteria Decision-Making

    by Ali E. Anqi, Azam A. Mohammed

    Water desalination by membrane distillation (MD) can be affected by a wide range of operating parameters. The present work uses combinational approach of Analytical Hierarch process (AHP) and Fuzzy Analytical Hierarchy process (Fuzzy-AHP) to identify the most important parameters in the MD desalination. Five process parameters and key-performance indicators, named derivable outputs (DOs), are considered, along with the critical factors affecting these DOs in the current study. The DOs and the critical influencing factors (CIFs) are selected based on their experimental feasibility. The investigation involves five DOs, which are liquid entry pressure, thermal power consumption, permeate quality, permeate flux, and pumping (feed circulation) power. A total of twenty-five critical influencing factor were associated with the DOs. The identification of the DOs and CIFs was based on the literature review, and further analyses were performed. Both methods, AHP and Fuzzy-AHP, determined six extremely important CIFs in the desalination MD, which are feed temperature, feed concentration, or feed salinity; feed flow rate; membrane hydrophobicity; pore size; and membrane material. Moderately important CIFs are found to be four by both methods. These common CIFs are feed solution properties, membrane thickness, feed channel geometry, and pressure difference along the feed channel. Finally, the least preferred CIFs are four common in both methods that are MD configuration, duration of test, specific heat of feed solution, and viscosity.