PZPeichao Zou

Peichao Zou

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Peichao Zou has a total of 168 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Quasi-Zero-Strain High-Voltage P2-Type Na2/3Li1/6Ni1/3Mn1/2O2 Cathodes Enabled by Capacity-Strain Balance

    by Di Miao, Jiamin Fei, Nan Zhang, Yuxuan Li, Yang Liu, Zhongxian Li, Libing Yao, Rui Zhang, Peichao Zou

    Deep sodium extraction/insertion in Mn-based P2-type layered cathodes usually induces undesired lattice strain, transition-metal layer gliding, and irreversible phase transitions, which limit their high-voltage cycling stability. Here, Li incorporation is employed to construct P2–Na2/3Li1/6Ni1/3Mn1/2O2 and regulate the capacity-strain balance for high-voltage sodium-ion batteries. By introducing electrochemically inactive Li while maintaining the Ni content, the local transition-metal-layer environment is modified, enabling stable Na+ storage within the P2 structure. The obtained cathode delivers a discharge capacity of 107 mAh g–1 and an active-material-level specific energy of 363 Wh kg–1 at 0.1 C, while maintaining 95.23% capacity retention after 100 cycles at 1.0 C within 2.0–4.5 V. More importantly, XRD results reveal a reversible reaction pathway characterized by predominantly solid-solution-like structural evolution with suppressed P2–O2/OP4 phase transition during sodium extraction/insertion, giving a maximum volume change of 1.37%. These results suggest that Li incorporation effectively balances the reversible capacity output and structural strain. The relatively low volume change per unit capacity (0.0128% (mAh g–1)−1) further highlights the advantage of this capacity-strain balance strategy.

  • Plasma‐Induced Surface Fluorination of Metal Foils as Reliable Reference Electrodes for Fluoride‐Ion Batteries

    by Jiamin Fei, Xinyan Guo, Wenqi Xiao, Honghao Zhu, Kai Yu, Weiwei Hou, Yongqi Zhang, Xinhui Xia, Peichao Zou

    Fluoride‐ion batteries (FIBs) are promising for next‐generation energy storage, but their fundamental studies are limited by the rareness of stable and reproducible reference electrodes, unlike the case of lithium, sodium, and zinc chemistry, where their metal anodes can be directly leveraged as the reference electrode. Here, we report a binder‐free strategy to fabricate integrated Pb/PbF 2 electrodes via CF 4 plasma‐assisted fluorination of metallic Pb foils. By tuning the plasma power, temperature, and treatment time, the phase composition, morphology, and fluorination degree of resultant electrodes can be effectively controlled. The evolution mechanism between α‐phase and β‐phase lead(II) fluorides is established, governed by the plasma energy input and surface thermodynamics. Our proposed plasma fluorination strategy is also demonstrated to be versatile in obtaining Sn/SnF 2 electrodes with good structural integrity and tunable fluorination level. This approach avoids binder‐related issues in conventional slurry‐casting electrodes and provides a reliable pathway for developing reliable reference electrodes in FIB systems.

  • Defective Interface Customizes Anion-Aggregated Helmholtz Plane for Anode-Less Lithium Metal Batteries

    by Haijie Zhao, Shibo Du, Qinsheng Liu, Xianbin Liu, Dunqi Lu, Ting Liu, Yanhong Yin, Yesheng Li, Peichao Zou, Ziping Wu

    Anode-less lithium metal batteries (Al-LMBs) represent a promising paradigm in realizing both high energy density and superior cycling lifetime compared with traditional battery configurations using flood lithium metal (Li0) anodes or an extreme anode-free battery architecture. Yet, the practically achievable battery performance has been substantially limited by vulnerable anode-electrolyte interphases and poor anode reversibility. In this study, we report a composite lithium-less anode via leveraging a defective host (copper wrapped with an oxygen and vacancy-rich graphene layer, denoted as Cu/DGr), which delivers a charge-adsorption effect and favors to formulate a robust anode-electrolyte interphase and stabilize Li0 anode cycling. Experimental characterizations and theoretical simulations jointly reveal that the defects in Cu/DGr offer an anion-aggregated Helmholtz plane due to the strong affinity with the electrolyte anions and then lead to a uniform and LiF-rich SEI layer with a high Young's modulus. Meanwhile, Cu/DGr exhibits enhanced Li+ coordination capability, which expedites the Li+ electrochemical kinetics. Consequently, the lithium-less anode based on Cu/DGr enables reversible Li0 plating/stripping for over 1800 h with an extremely low overpotential (8 mV at 1 mA/cm2) in symmetric cells. Moreover, the assembled Al-LMBs also display superior stability in both coin cells (100 cycles at 1 C) and pouch cells (areal capacity: 4 mAh/cm2) under a low N/P ratio (1:1) and lean-electrolyte conditions. Our discoveries provide insights to guide the design of high-performance Al-LMBs via the host-engineering strategy.


  • Open Access

    Ion Flux Optimization via Hollow Carbon Nanoreactors for High-Power and Energy-Dense Li-Cl2 Batteries

    by Wei Chen, Yan Xu, Jiejun Ye, Zhipeng Wang, Peichao Zou, Lidong Sun, Liyao Wang, Qi Liu, Mark Rummeli, Shenxiang Zhang

    Rechargeable Li-Cl2 batteries are a promising high-energy-density technology but having critical challenges of limited rates and capacities. Insufficient and uneven ion flux in the interior of cathode is a crucial factor that hinders the rate performance and specific capacity of Li-Cl2 battery. Herein, we propose and develop hollow carbon nanoreactors (HCNRs) as cathode materials for extremely high-power and high-energy Li-Cl2 batteries. By confining electrolytes within tailored cavities, HCNRs facilitate enhanced and spatially homogenized ion flux in the interior of cathode, eliminating the reliance on bulk electrolyte diffusion and prohibiting rapid electrode degradation. This design enables the as-assembled Li-Cl2 cell to achieve an ultrahigh current density of 120 mA/cm2 during the charge/discharge process (charging to 500 mAh/g in 15 s) and a record-breaking specific capacity of 8000 mAh/g (9 mAh/cm2), superior to the reported literature. Furthermore, we demonstrate the scalability of this design in a 1-Ah-scale pouch cell, achieving a practical cell-specific energy of 106 Wh/kg. This hollow nanoreactor design highlights the potential of Li-Cl2 batteries as high-power and energy-dense systems, paving the way for their practical applications.

  • A Water-in-Salt Electrolyte for Room-Temperature Fluoride-Ion Batteries Based on a Hydrophobic–Hydrophilic Salt

    by Peichao Zou, Chunyang Wang, Yubin He, Huolin L. Xin, Ruoqian Lin

    Realizing room-temperature, efficient, and reversible fluoride-ion redox is critical to commercializing the fluoride-ion battery, a promising post-lithium-ion battery technology. However, this is challenging due to the absence of usable electrolytes, which usually suffer from insufficient ionic conductivity and poor (electro)chemical stability. Herein we report a water-in-salt (WIS) electrolyte based on the tetramethylammonium fluoride salt, an organic salt consisting of hydrophobic cations and hydrophilic anions. The new WIS electrolyte exhibits an electrochemical stability window of 2.47 V (2.08-4.55 V vs Li+/Li) with a room-temperature ionic conductivity of 30.6 mS/cm and a fluoride-ion transference number of 0.479, enabling reversible (de)fluoridation redox of lead and copper fluoride electrodes. The relationship between the salt property, the solvation structure, and the ionic transport behavior is jointly revealed by computational simulations and spectroscopic analysis.


  • Making Plasticized Polymer Electrolytes Stable Against Sodium Metal for High‐Energy Solid‐State Sodium Batteries

    by Peichao Zou, Chunyang Wang, Yubin He, Huolin L. Xin

    Solid polymer electrolytes based on plastic crystals are promising for solid‐state sodium metal (Na0) batteries, yet their practicality has been hindered by the notorious Na0‐electrolyte interface instability issue, the underlying cause of which remains poorly understood. Here, by leveraging a model plasticized polymer electrolyte based on conventional succinonitrile plastic crystals, we uncover its failure origin in Na0 batteries is associated with the formation of a thick and non‐uniform solid electrolyte interphase (SEI) and whiskery Na0 nucleation/growth. Furthermore, we design a new additive‐embedded plasticized polymer electrolyte to manipulate the Na0 deposition and SEI formulation. For the first time, we demonstrate that introducing fluoroethylene carbonate (FEC) additive into the succinonitrile‐plasticized polymer electrolyte can effectively protect Na0 against interfacial corrosion by facilitating the growth of dome‐like Na0 with thin, amorphous, and fluorine‐rich SEIs, thus enabling significantly improved performances of Na//Na symmetric cells (1,800 h at 0.5 mA cm−2) and Na//Na3V2(PO4)3 full cells (93.0 % capacity retention after 1,200 cycles at 1 C rate in coin cells and 93.1 % capacity retention after 250 cycles at C/3 in pouch cells at room temperature). Our work provides valuable insights into the interfacial failure of plasticized polymer electrolytes and offers a promising solution to resolving the interfacial instability issue.


  • Making Plasticized Polymer Electrolytes Stable Against Sodium Metal for High‐Energy Solid‐State Sodium Batteries

    by Peichao Zou, Chunyang Wang, Yubin He, Huolin L. Xin

    Solid polymer electrolytes based on plastic crystals are promising for solid‐state sodium metal (Na0) batteries, yet their practicality has been hindered by the notorious Na0‐electrolyte interface instability issue, the underlying cause of which remains poorly understood. Here, by leveraging a model plasticized polymer electrolyte based on conventional succinonitrile plastic crystals, we uncover its failure origin in Na0 batteries is associated with the formation of a thick and non‐uniform solid electrolyte interphase (SEI) and whiskery Na0 nucleation/growth. Furthermore, we design a new additive‐embedded plasticized polymer electrolyte to manipulate the Na0 deposition and SEI formulation. For the first time, we demonstrate that introducing fluoroethylene carbonate (FEC) additive into the succinonitrile‐plasticized polymer electrolyte can effectively protect Na0 against interfacial corrosion by facilitating the growth of dome‐like Na0 with thin, amorphous, and fluorine‐rich SEIs, thus enabling significantly improved performances of Na//Na symmetric cells (1,800 h at 0.5 mA cm−2) and Na//Na3V2(PO4)3 full cells (93.0 % capacity retention after 1,200 cycles at 1 C rate in coin cells and 93.1 % capacity retention after 250 cycles at C/3 in pouch cells at room temperature). Our work provides valuable insights into the interfacial failure of plasticized polymer electrolytes and offers a promising solution to resolving the interfacial instability issue.


  • Broadening solid ionic conductor selection for sustainable and earth-abundant solid-state lithium metal batteries

    by Peichao Zou, Chunyang Wang, Yubin He, Huolin L. Xin

    A challenging task in solid-state batteries is finding a solid ionic conductor that is simultaneously electronically insulative, stable at both low and high voltages, and sustainable. Current prevalent ceramic lithium-ion conductors (LICs) struggle to balance all these criteria, and their selection is limited for application in solid-state lithium metal batteries. Here, we report a universal solid electrolyte design paradigm, i.e., an ceramic LIC sandwiched between two solid electronic separators, to allow a broad range of ceramic LICs including Li1.5Al0.5Ti1.5(PO4)3, LiV3O8, and Li4Ti5O12, to be deployed in solid-state lithium batteries. With the solid electrolyte design, the requirements of electronic insulation or (electro)chemical stability for ceramic LICs are no longer needed. A high critical current density of 14 mA cm−2 (under a constant plating/stripping capacity of 0.5 mA h cm−2) and long-life cycling (7000 hours at 0.2 mA cm−2 and 2500 hours at 0.5 mA cm−2) were realized in Li//Li symmetric cells at room temperature. Remarkably high capacity retentions (87% after 400 cycles) were also achieved in Li0 full cells paired with LiNi0.8Mn0.1Co0.1O2 cathodes (mass loading: 7.4 mg cm−2). Our discoveries promise the implication of broader-ranging, more sustainable, yet previously unrecognized ionic conductors in practical solid-state batteries.