HPHea Jung Park

Hea Jung Park

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Hea Jung Park has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Systematic Design and Synthesis of Methacrylate- and Trimethoxysilane-Functionalized POSS and DDSQ Nanostructures

    by Bu-Hyun Moon, Eo Jin Oh, Hea Jung Park, Dong-Soo Shin

    Polyhedral oligomeric silsesquioxane (POSS) and double-decker silsesquioxane (DDSQ) are organic–inorganic hybrid nanostructures with well-defined siloxane frameworks that can be functionalized with various organic groups. In this study, a systematic series of six functional silsesquioxane derivatives was prepared using three different molecular architectures, POSS-8, DDSQ-4, and DDSQ-2. Three methacrylate-functionalized derivatives and three trimethoxysilane-functionalized derivatives were prepared from the corresponding Si–H-containing POSS and DDSQ precursors through hydrosilylation reactions. The target compounds were obtained in good yields of 81–91%, and their molecular structures were characterized by FT-IR, 1H and 13C NMR, 29Si NMR, and MALDI-TOF mass spectrometry. The spectroscopic results confirmed the successful introduction of the methacrylate and trimethoxysilane groups while maintaining the characteristic silsesquioxane frameworks. The parallel functionalization of POSS-8, DDSQ-4, and DDSQ-2 established a systematic series of silsesquioxane molecular precursors differing in framework architecture and peripheral functional-group density. The resulting derivatives contain either methacrylate or trimethoxysilane functionalities; however, their subsequent polymerization, hydrolysis/condensation, and material performance were not evaluated in the present study. Accordingly, these compounds are regarded as potential molecular precursors for further investigation.

  • Open Access

    Emission Wavelength Control via Molecular Structure Design of Dinuclear Pt(II) Complexes: Optimizing Optical Properties for Red- and Near-Infrared Emissions

    by Hea Jung Park

    Phosphorescent Pt(II) complexes have garnered significant attention as key components in luminescence-based systems due to their highly efficient emission properties. A notable characteristic of these complexes is their ability to form excimers through strong molecular stacking in concentrated solutions or solid film states. This aggregation-driven emission, primarily arising from metal–metal to ligand charge transfer (MMLCT), is influenced by overlapping d-orbitals oriented perpendicular to the square planar structure of the Pt(II) complexes. Although this property hinders the development of pure blue-emitting Pt(II) complexes, it facilitates the design of materials that emit red- and near-infrared (NIR) light. By employing advanced molecular design techniques, dinuclear Pt(II) complexes have been optimized to significantly enhance red and NIR emissions through the modulation of Pt-Pt interactions and adjustments in ligand electron densities. This review elucidates how the control of Pt-Pt distances and strategic ligand modifications can directly influence the emission spectra toward red and NIR regions. A comparative analysis of recent studies underscores the novelty and effectiveness of double-decker-type dinuclear Pt(II) complexes in achieving efficient emission characteristics in the long-wavelength range. These insights may guide the design of molecular structures for next-generation organometallic phosphorescent materials.


  • Thermal Management Enables Stable Perovskite Nanocrystal Light‐Emitting Diodes with Novel Hole Transport Material

    by Xinyu Shen, Seon Lee Kwak, Woo Hyeon Jeong, Ji Won Jang, Zhongkai Yu, Hyungju Ahn, Hea Jung Park, Hyosung Choi, Sung Heum Park, Henry J. Snaith, et al.

    The severely insufficient operational lifetime of perovskite light‐emitting diodes (LEDs) is incompatible with the rapidly increasing external quantum efficiency, even as it approaches the theoretical limit, thereby significantly impeding the commercialization of perovskite LEDs. In addition, Joule heating induces ion migration and surface defects, degrades the photoluminescence quantum yield and other optoelectronic properties of perovskite films, and induces the crystallization of charge transport layers with low glass transition temperatures, resulting in LED degradation under continuous operation. Here, a novel thermally crosslinked hole transport material, poly(FCA60‐co‐BFCA20‐co‐VFCA20) (poly‐FBV), with temperature‐dependent hole mobility is designed, which is advantageous for balancing the charge injection of the LEDs and limiting the generation of Joule heating. The optimised CsPbI3 perovskite nanocrystal LEDs with poly‐FBV realise approximately a 2‐fold external quantum efficiency increase over the LED with commercial hole transport layer poly(4‐butyl‐phenyl‐diphenyl‐amine) (poly‐TPD), owing to the balanced carrier injection and suppressed exciton quenching. Moreover, because of the Joule heating control provided by the novel crosslinked hole transport material, the LED utilising crosslinked poly‐FBV has a 150‐fold longer operating lifetime (490 min) than that utilizing poly‐TPD (3.3 min). The study opens a new avenue for the use of PNC LEDs in commercial semiconductor optoelectronic devices.


  • Open Access

    Indolocarbazole-Based Photo-Crosslinkable Hole-Transporting Layer for Efficient Solution-Processed Organic Light-Emitting Diodes

    by Jeong Yong Park, Seon Lee Kwak, Hea Jung Park, Do-Hoon Hwang

    We designed and synthesized a new indolocarbazole-based polymer, poly(N,N-diphenyl(5,11-dihexylindolo[3,2,1-jk]carbazol-2-yl)amine) (PICA), for solution-processed organic light-emitting diodes (OLEDs). The highest occupied and lowest unoccupied molecular orbital energy levels of this polymer, −5.25 and −2.46 eV, respectively, are suitable for hole transport from the anode to the emissive layer. PICA was photo-crosslinked by UV irradiation with ethane-1,2-diyl bis(4-azido-2,3,5,6-tetrafluorobenzoate) (FPA) as the photoinitiator. Successful crosslinking was confirmed by a decreased intensity in the azide-stretching FT-IR peak and solvent test with toluene (a suitable solvent for PICA). The PICA film photo-crosslinked with 3 wt% FPA showed enhanced solvent resistance (90%) compared to the non-crosslinked neat PICA film (<20%). Moreover, OLED devices using PICA-based hole-transporting layers exhibited better device performance (EQE/LE/PE: 8.88%/12.97/8.12 in red devices, 10.84%/38.47 cd/A/25.06 lm/W in green devices) than those using poly-TPD:FPA. We demonstrated that the photo-crosslinked PICA can be applied as a hole-transporting layer in solution-processed OLEDs.


  • Low dark current density in organic photodiodes achieved by reduced trap states of conjugated polymers bearing a fluorinated moiety

    by Yongqi Bai, Sungwoo Seo, Jong-Woon Ha, Minho Yoon, Ning Yang, Hea Jung Park, Sung Cheol Yoon, Changjin Lee, Do-Hoon Hwang, Jiyoul Lee

    A strategy to obtain low Jd in OPDs from a material point of view is presented: fluorination of the electron donor unit in a donor–acceptor type conjugated polymer is an effective way to reduce the Jd of OPDs by suppressing the trap DOS.


  • New green phosphorescent Ir(III) complex with carbazolylbenzimidazole ligand for solution‐processed organic light‐emitting diode

    by Amol Maruti Jadhav, Hea Jung Park, Jae‐Ho Jang, Jeong Yong Park, Seon Lee Kwak, Do‐Hoon Hwang

    We developed a new green phosphorescent iridium (III) complex, bis[2‐(9‐ethyl‐9H‐carbazol‐3‐yl)‐1‐methyl‐1H‐benzo[d]imidazole]iridium(III) acetylacetonate [(Bic)2Ir(acac)], which functions as a solution‐processable dopant for organic light‐emitting diodes (OLEDs). 2‐(9‐Ethyl‐9H‐carbazol‐3‐yl)‐1‐methyl‐1H‐benzo[d]imidazole was incorporated as the main ligand, while acetylacetone was introduced as an ancillary ligand in the heteroleptic iridium (III) complex. The molecular structure of the synthesized (Bic)2Ir(acac) was characterized by 1H‐ and 13C‐NMR. In addition, it was well soluble in common organic solvents, suitable for solution processible dopant material. The Ir (III) complex exhibited a green emission in solution state (dichloromethane) with an emission maximum at 503 nm. The solution‐processed OLED device using (Bic)2Ir(acac) as a green dopant achieved an external quantum efficiency of 6.85%, with a power efficiency of 14.96 lm/W, a maximum luminous efficiency of 23.00 cd/A, and Commission Internationale de Eclairage coordinates of (0.30, 0.61) at 7 wt% doping concentration.


  • New blue phosphorescent heteroleptic Ir(iii) complexes with imidazole- and N-methylimidazole carboxylates as ancillary ligands

    by Hea Jung Park, Eun Ah Chae, Hye Won Seo, Jae-Ho Jang, Won Jae Chung, Jun Yeob Lee, Do-Hoon Hwang, Ung Chan Yoon

    Imidazole- and N-methylimidazole carboxylate have been introduced to serve as ancillary ligands in heteroleptic Ir(III) complexes containing 2-phenylpyridine-based main ligands, with consideration of the frontier orbital energy levels. Complexes Ir1–Ir4 were synthesized and found to have LUMO levels higher than that of the corresponding Ir(III) complex containing pyridyl carboxylate. All the synthesized Ir(III) complexes exhibited blue phosphorescence emission maxima in the region of 465–467 nm at room temperature. Phosphorescent quantum efficiencies were increased by a factor of 1.8–6.7 by blocking the intermolecular hydrogen bonding between the imidazole carboxylate ligands of neighboring Ir(III) complexes, which was achieved by N-methylation of the imidazole carboxylate ancillary ligand. The organic light-emitting diodes fabricated using Ir3 and Ir4 as dopant materials in the emissive layers were found to emit blue emission with peaks at 469 and 471 nm and maximum external quantum efficiencies of 20.0 and 22.4%, respectively. Moreover, all the fabricated devices with Ir3 and Ir4 exhibited low efficiency roll-off, indicating excellent stability of the materials.