EDElcin Demirhan

Elcin Demirhan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Elcin Demirhan has a total of 14 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Production of Glass/Polypropylene Fiber-Reinforced Thermoplastic Lightweight Materials (LWRT)

    by Zulfiye Ahan, Elcin Demirhan, Aylin Altinbay, Mustafa Dogu, Christoph Burgstaller

    The growing demand for sustainable, lightweight, and high-performance materials in industries such as automotive, aerospace, and construction necessitates innovative production processes. This study introduces a novel, entirely dry manufacturing method for lightweight reinforced thermoplastic (LWRT) panels, thereby offering an environmentally friendly and cost-effective alternative to conventional wet processes. Nonwoven fabrics with areal weights of 150 and 250 gsm, comprising a 50 wt% glass fiber (GF)-reinforced polypropylene (PP) matrix, were fabricated using a double carding technique, with the effect of subsequent needle punching on fiber bonding and homogeneity systematically investigated. A mixture of expandable microsphere foaming agent and PP powder was applied onto nonwoven fabrics; lamination was performed to induce foam formation at 220 °C and 1 m/min conveyor belt speed. SEM and microscopic analysis confirmed the impregnation of PP and the successful formation of microcellular structures through the foaming process, leading to a decrease in the panel density. Tensile and flexural strength were affected by the needle punching process and fabric areal weight. Panels made with 250 gsm nonwoven fabrics yielded mechanical properties similar to those of the commercial reference panel.

  • Open Access

    Response surface methodology for optimizing adsorption process parameters for tadalafil removal by raw eggshell

    by Zeynep Halici, Elçin Demirhan

    Excessive discharge of pharmaceutical wastes into the surface water causes harmful effect on environment, so its removal has aroused much attention in recent years. This study investigated the potential of raw eggshell as a low cost adsorbent on the removal of tadalafil by adsorption experiments. Characterization of adsorbent was investigated using Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM) and X-ray diffraction (XRD). To comprehensively evaluate the independent and interacting effects of several process factors, such as pH, temperature, and amount of adsorbent, Box-Behnken design was used. According to results of variance analysis (ANOVA) it was concluded that the second-order model had strong statistical relevance and was characterized by a high coefficient of determination (R2) value. It was clear from the experimental results that as the pH level and adsorbent amount were raised, so was the removal efficiency. At pH 5, 25 °C, and 7.5 g/100 mL of adsorbent, the greatest removal efficiency of 72.9% was attained. Furthermore, the analysis of equilibrium data showed that, in comparison to the Langmuir isotherm model, the Freundlich isotherm model offered a better fit for dye removal. Furthermore, the adsorption kinetic was also evaluated and it was obtained the adsorption followed by pseudo second order model for the tadalafil removal onto eggshell.


  • Open Access

    Preparation and characterization of chitosan/zeolite composites for Reactive Orange 122 dye removal from aqueous media: isotherm and kinetic studies

    by Gökmen T. Şanlı, Elçin Demirhan

    The present study aimed to reduce environmental pollution by using a natural and cheap adsorbent for the removal of Reactive Orange 122, an anionic dye harmful to the environment, from wastewater in the textile industry. The zeolite mineral, abundant in Turkey, easily accessible, and cost-effective, was first utilized for this purpose. However, it was concluded that sufficient adsorption was not provided in the treatment of reactive dyes due to the structure of the natural zeolite mineral. Therefore, to increase the adsorption efficiency of zeolite minerals, published techniques were utilized to modify it with chitosan, and chitosan/zeolite composite was prepared. The adsorbents were characterized by using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and Brunauer–Emmett–Teller (BET) analysis. The study also examined the influence of various parameters including pH, contact time, and temperature on the adsorption of RO122 dye. Furthermore, the adsorption equilibrium was analyzed by evaluating kinetic and isotherm models. In comparison to the pseudo first-order model, the pseudo-second-order model was determined to be the best-fitting model with a coefficient of determination of 0.999. The study also examined two isotherm models, namely Langmuir and Freundlich, to adjust the equilibrium data to achieve optimal alignment. The Freundlich model demonstrated superior efficacy as an adsorption isotherm compared to the Langmuir isotherm model, as evidenced by a coefficient of determination (R 2) of 0.9941.


  • Open Access

    PMMA/SWCNT Composites with Very Low Electrical Percolation Threshold by Direct Incorporation and Masterbatch Dilution and Characterization of Electrical and Thermoelectrical Properties

    by Ezgi Uçar, Mustafa Dogu, Elcin Demirhan, Beate Krause

    In the present study, Poly(methyl methacrylate) (PMMA)/single-walled carbon nanotubes (SWCNT) composites were prepared by melt mixing to achieve suitable SWCNT dispersion and distribution and low electrical resistivity, whereby the SWCNT direct incorporation method was compared with masterbatch dilution. An electrical percolation threshold of 0.05–0.075 wt% was found, the lowest threshold value for melt-mixed PMMA/SWCNT composites reported so far. The influence of rotation speed and method of SWCNT incorporation into the PMMA matrix on the electrical properties and the SWCNT macro dispersion was investigated. It was found that increasing rotation speed improved macro dispersion and electrical conductivity. The results showed that electrically conductive composites with a low percolation threshold could be prepared by direct incorporation using high rotation speed. The masterbatch approach leads to higher resistivity values compared to the direct incorporation of SWCNTs. In addition, the thermal behavior and thermoelectric properties of PMMA/SWCNT composites were studied. The Seebeck coefficients vary from 35.8 µV/K to 53.4 µV/K for composites up to 5 wt% SWCNT.


  • Microwave drying effect on drying characteristic and energy consumption of Ficus carica Linn leaves

    by Pelin Yilmaz, Elcin Demirhan, Belma Özbek

    Ficus carica Linn leaves having significant pharmacological properties such as antioxidant, antifungal, antidiabetic, antibacterial, anti‐inflammatory, and anti‐pyretic are available just in season. The effective utilization of nutritional values of leaves with enhanced shelf life has gained attention. Drying is usually the preferred technique to eliminate microbial attacks and increase shelf life of seasonal food products. Therefore, in the present study, the effect of microwave drying conditions on effective moisture diffusivity, activation energy, specific energy consumption (SEC), and energy efficiency were investigated at various microwave output power levels and sample amounts. The seven mathematical models were applied to describe the microwave drying kinetics of leaves and Page model was found as the best model. The maximum effective moisture diffusivity and drying rate constant values were determined as 9.84 × 10−11 m2/s and 1.15 1/min, respectively, at microwave output power level of 900 W and sample amount of 20 g. The activation energy values were estimated using the modified Arrhenius equation associated with effective moisture diffusivity (Ea = 11.41 W/g) and drying rate constant (Ea = 8.28 W/g). Additionally, the minimum SEC and maximum energy efficiency values (%) were found as 5.60 MJ/kg water and 40.31, respectively, at microwave output power level of 360 W and sample amount of 100 g. The results obtained from the present study seemed potentially useful to explore the applicability of microwave drying on Ficus carica Linn leaves to expand the availability of leaves having numerous nutritional ingredients throughout the whole year and take the advantage of their benefits in various industries.Practical Applications: Even if the benefits of Ficus carica L. leaves have been well presented in various studies in the literature, no study was found particularly which investigated the microwave drying kinetics of these leaves. Apart from the mathematical modeling of the drying characteristic and energy aspects of the leaf samples, the present study also targets to expand the usage area of these leaves with high shelf life and enable people to reach the leaves easily throughout the whole year. Hence, this study has potential for the commercial usage of these leaves for their effective utilization in various industries; such as beverage, bakery, cosmetic, and so on. In that way, the valuable nutritional ingredients of these leaves have been turned in favor of human consumption.


  • Open Access

    Response surface methodology approach for adsorptive removal of Reactive Blue 19 onto green pea pod

    by Elçin Demirhan

    In the present study, removal of Reactive Blue 19 dye by using green pea pod as a low-cost adsorbent was investigated. Box–Behnken design was used to determine the independent and interaction influences of process variables of pH, temperature and adsorbent amount. The variance analysis (ANOVA) results showed that the second order model with high coefficient of determination value (R2 = 0.9997) was statistically significant. The experimental results stated that the removal efficiency increased when the pH value decreased and the adsorbent amount increased. The maximum removal (99.42%) was obtained at pH 2, temperature of 35 °C and adsorbent amount of 1.5 g/100 mL. The equilibrium data investigation showed that the Freundlich isotherm model fitted better for removal of dye than did the Langmuir isotherm model. Furthermore, the adsorption kinetic was also evaluated and it was found that the adsorption followed the pseudo second order model for the Reactive Blue 19 removal onto green pea pod.


  • Kefir Grain Biomass Production: Influence of Different Culturing Conditions and Examination of Growth Kinetic Models

    by Dilek Kiliç Apar, Elçin Demirhan, Birsen Özel, Belma Özbek

    In this study, kefir grain biomass growth was investigated in whey enriched with some additives such as yoghurt, milk, glucose, sucrose, yeast extract and carob extract. The fermentation experiments were carried out at 27°C for 10 days by refreshing the cultivation media at the end of each 24 h fermentation period. Maximum and minimum biomass increases were obtained as 1,438 and 836% in whey enriched with 5% (w/v) yeast extract and 10% (v/v) carob extract, respectively. Kefir biomass increase and fermentation kinetics were examined at different temperatures (17, 27, 37°C) and different initial kefir grain concentrations (2.5, 5, 7.5%) for selected culture mediums (in whey and in whey enriched with milk and yoghurt). Optimum temperature and initial grain concentration for kefir biomass growth were obtained as 27°C and 5% for all examined mediums. Modelling studies were performed and various kinetic models tested to represent the kefir biomass growth and fermentation kinetics. The convenience of the kefir biomass growth to the Monod kinetics was also examined.Practical Applications: The varied microbial composition of kefir grains provides novel applications to them, such as, in bread production as baker's yeast, cheese production, polysaccharide production, volatile aroma compound production and ethanol production. The biomass increase of kefir grains by traditional inoculation in milk is relatively low, hence to use kefir grains in commercial applications their production has to be improved using alternative cultivation mediums and optimizing the process conditions. So in the study presented by this article the kinetics of kefir grain biomass growth was investigated in whey (an alternative raw material for kefir biomass production that is a dairy liquid waste of negligible cost) enriched with additives such as yoghurt, milk, glucose, sucrose, yeast extract and carob extract to improve the biomass production of kefir and use the whey as an effective low cost substrate. Also the effect of temperature and initial kefir grain concentration on biomass production and fermentation were examined and different mathematical models were analyzed to represent the kefir biomass growth and kefir fermentation kinetics.


  • Color Change Kinetics of Tea Leaves During Microwave Drying

    by Elçin Demirhan, Belma Özbek

    In the present study, the effect of microwave power and sample amount on color change kinetics of tea leaves was investigated during microwave drying. Hunter L , a and b system was used for the color change of the materials; and the total color change (Δ E ), chroma, hue angle and browning index (BI) were calculated by using these values. The color of the tea leaves was shifted towards the darker region after the microwave drying process. The mathematical modeling study of color change kinetic showed that a , b , chroma and BI fitted to a first-order kinetic model, while L , total color change (Δ E ) and hue angle followed a zero-order kinetic model. For calculation of the activation energy for color change kinetic parameters, the exponential expression based on Arrhenius equation was used.