Leandro Rezende Franco
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Leandro Rezende Franco has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Carlos Moyses Araujo
Karlstad University, Department of Engineering and Physics, Karlstad, 65188, Sweden
5 shared publications - Kaline Coutinho
Instituto de Física, Universidade de São Paulo, São Paulo-SP, Brazil
5 shared publications - Cleber Fabiano N. Marchiori
Department of Engineering and Physics, Karlstad University, SE-65188 Karlstad, Sweden
3 shared publications - Ergang Wang
Department of Chemistry and Chemical Engineering Chalmers University of Technology Göteborg Sweden
3 shared publications - Herbert C. Georg
Instituto de Física, Universidade Federal de Goiás , Goiânia, Goiás 74690-900, Brazil
2 shared publications - Kalil Cristhian Figueiredo Toledo
Instituto de Química, Universidade de São Paulo, Av. Lineu Prestes 748, Butantã, 05508-000 São Paulo, SP, Brazil
2 shared publications
Latest Publications
- Open Access
- 10 July 2025
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 7 (4) , 045001
Multiscale modeling of structural disorder and environmental effects on the ground and excited states properties of a conjugated donor–acceptor polymer in the bulk phase
We herein undertook a multiscale approach combining molecular dynamics (MD) simulations of solution-processed polymer bulk with sequential quantum mechanics/molecular mechanics (s-QM/MM) calculations to assess the influence of structural disorder and environmental effects on the electronic structure of conjugated donor–acceptor (D–A) polymers in bulk phase. As a case study, PF5-Y5 polymer bulk formation is modeled via gradual solvent removal under ambient conditions. The electronic structure is analyzed using state-of-the-art electronic structure methods, including optimally tuned range-separated hybrids (OT-DFT), double-hybrid functionals, and the second order algebraic diagrammatic construction (ADC(2)) method as a reference. Environmental effects are accounted for using both implicit and explicit electrostatic embedding models. Our findings reveal that structural disorder at the D–A interfaces reduces frontier orbital overlap and narrows the fundamental gap by localizing the orbitals, primarily due to significant LUMO stabilization on the acceptor unit. This effect enhances the charge-transfer (CT) character of low-lying singlet and triplet states within the OT-DFT approach, while double hybrid methods preserve a more localized nature. Disorder reshapes the energetic gaps between singlet-singlet and singlet-triplet excited states and increases its energetic disorder, with CT-rich states being particularly sensitive. Explicit electrostatic embedding further amplifies CT character and disorder in singlets while preserving triplet localization. These effects contribute to spectral broadening and help explain a shoulder feature in the visible region, linking it to structural disorder and ambient anisotropy alongside CT excitations. The choice of QM method and environment treatment in QM/MM simulations is critical, neglecting anisotropy in the surroundings can influence the excited-state descriptions in D–A materials. This work advances our theoretical understanding of organic photovoltaics by highlighting these interrelated effects.
- 10 July 2025
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 7 (4) , 045001
Open AccessMultiscale modeling of structural disorder and environmental effects on the ground and excited states properties of a conjugated donor–acceptor polymer in the bulk phase
We herein undertook a multiscale approach combining molecular dynamics (MD) simulations of solution-processed polymer bulk with sequential quantum mechanics/molecular mechanics (s-QM/MM) calculations to assess the influence of structural disorder and environmental effects on the electronic structure of conjugated donor–acceptor (D–A) polymers in bulk phase. As a case study, PF5-Y5 polymer bulk formation is modeled via gradual solvent removal under ambient conditions. The electronic structure is analyzed using state-of-the-art electronic structure methods, including optimally tuned range-separated hybrids (OT-DFT), double-hybrid functionals, and the second order algebraic diagrammatic construction (ADC(2)) method as a reference. Environmental effects are accounted for using both implicit and explicit electrostatic embedding models. Our findings reveal that structural disorder at the D–A interfaces reduces frontier orbital overlap and narrows the fundamental gap by localizing the orbitals, primarily due to significant LUMO stabilization on the acceptor unit. This effect enhances the charge-transfer (CT) character of low-lying singlet and triplet states within the OT-DFT approach, while double hybrid methods preserve a more localized nature. Disorder reshapes the energetic gaps between singlet-singlet and singlet-triplet excited states and increases its energetic disorder, with CT-rich states being particularly sensitive. Explicit electrostatic embedding further amplifies CT character and disorder in singlets while preserving triplet localization. These effects contribute to spectral broadening and help explain a shoulder feature in the visible region, linking it to structural disorder and ambient anisotropy alongside CT excitations. The choice of QM method and environment treatment in QM/MM simulations is critical, neglecting anisotropy in the surroundings can influence the excited-state descriptions in D–A materials. This work advances our theoretical understanding of organic photovoltaics by highlighting these interrelated effects.
- Open Access
- 28 February 2025
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 58 (5) , 2719-2729
Acidochromic Behaviors of Indacenodithiophene-Based Conjugated Polymers Containing Azo, Imine, and Vinyl Bonds
Acidochromic materials possess significant potential for the development of molecular switches, acid sensors, smart displays, and erasable/reprintable media. The semiconductive nature of conjugated polymers exhibiting such a behavior makes them ideal for use in electronic devices. In this study, we present a comparative investigation of three indacenodithiophene-based conductive polymers, containing azo, imine, and vinyl bonds (namely, PIDT-BAB, PIDT-BIB, and PIDT-BVB, respectively). We examined the alterations in the spectral properties of these polymers upon exposure to trifluoroacetic acid (TFA). The acidochromic response of PIDT-BAB and PIDT-BIB is indicated by DFT calculations to occur via protonation at the nitrogen atom. PIDT-BIB demonstrated heightened sensitivity to TFA. Conversely, PIDT-BVB did not display acidochromic properties in the film but was responsive to TFA in solution through acid doping. Repeated exposure of polymer films was used to examine the robustness of the polymers over 50 cycles. DFT calculations showed an increase in the planarity of PIDT-BAB and PIDT-BIB backbones as a result of protonation. This effect was particularly strong in PIDT-BAB, resulting in an unusually large bathochromic shift of 510 nm. The corresponding pink-to-transparent transition is particularly interesting for applications in sensors. Our findings provide valuable guidelines for the design of conjugated polymers tailored for acidochromic devices.
- 28 February 2025
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 58 (5) , 2719-2729
Open AccessAcidochromic Behaviors of Indacenodithiophene-Based Conjugated Polymers Containing Azo, Imine, and Vinyl Bonds
Acidochromic materials possess significant potential for the development of molecular switches, acid sensors, smart displays, and erasable/reprintable media. The semiconductive nature of conjugated polymers exhibiting such a behavior makes them ideal for use in electronic devices. In this study, we present a comparative investigation of three indacenodithiophene-based conductive polymers, containing azo, imine, and vinyl bonds (namely, PIDT-BAB, PIDT-BIB, and PIDT-BVB, respectively). We examined the alterations in the spectral properties of these polymers upon exposure to trifluoroacetic acid (TFA). The acidochromic response of PIDT-BAB and PIDT-BIB is indicated by DFT calculations to occur via protonation at the nitrogen atom. PIDT-BIB demonstrated heightened sensitivity to TFA. Conversely, PIDT-BVB did not display acidochromic properties in the film but was responsive to TFA in solution through acid doping. Repeated exposure of polymer films was used to examine the robustness of the polymers over 50 cycles. DFT calculations showed an increase in the planarity of PIDT-BAB and PIDT-BIB backbones as a result of protonation. This effect was particularly strong in PIDT-BAB, resulting in an unusually large bathochromic shift of 510 nm. The corresponding pink-to-transparent transition is particularly interesting for applications in sensors. Our findings provide valuable guidelines for the design of conjugated polymers tailored for acidochromic devices.
- Open Access
- 1 March 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (10) , 12886-12896
Aqueous Processed All-Polymer Solar Cells with High Open-Circuit Voltage Based on Low-Cost Thiophene–Quinoxaline Polymers
Eco-friendly solution processing and the low-cost synthesis of photoactive materials are important requirements for the commercialization of organic solar cells (OSCs). Although varieties of aqueous-soluble acceptors have been developed, the availability of aqueous-processable polymer donors remains quite limited. In particular, the generally shallow highest occupied molecular orbital (HOMO) energy levels of existing polymer donors limit further increases in the power conversion efficiency (PCE). Here, we design and synthesize two water/alcohol-processable polymer donors, poly[(thiophene-2,5-diyl)-alt-(2-((13-(2,5,8,11-tetraoxadodecyl)-2,5,8,11-tetraoxatetradecan-14-yl)oxy)-6,7-difluoroquinoxaline-5,8-diyl)] (P(Qx8O-T) ) and poly[(selenophene-2,5-diyl)-alt-(2-((13-(2,5,8,11-tetraoxadodecyl)-2,5,8,11-tetraoxatetradecan-14-yl)oxy)-6,7-difluoroquinoxaline-5,8-diyl)] (P(Qx8O-Se)) with oligo(ethylene glycol) (OEG) side chains, having deep HOMO energy levels (∼-5.4 eV). The synthesis of the polymers is achieved in a few synthetic and purification steps at reduced cost. The theoretical calculations uncover that the dielectric environmental variations are responsible for the observed band gap lowering in OEG-based polymers compared to their alkylated counterparts. Notably, the aqueous-processed all-polymer solar cells (aq-APSCs) based on P(Qx8O-T) and poly[(N,N'-bis(3-(2-(2-(2-methoxyethoxy)-ethoxy)ethoxy)-2-((2-(2-(2-methoxyethoxy)ethoxy)ethoxy)-methyl)propyl)naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl)-alt-(2,5-thiophene)] (P(NDIDEG-T)) active layer exhibit a PCE of 2.27% and high open-circuit voltage (VOC) approaching 0.8 V, which are among the highest values for aq-APSCs reported to date. This study provides important clues for the design of low-cost, aqueous-processable polymer donors and the fabrication of aqueous-processable OSCs with high VOC.
- 1 March 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (10) , 12886-12896
Open AccessAqueous Processed All-Polymer Solar Cells with High Open-Circuit Voltage Based on Low-Cost Thiophene–Quinoxaline Polymers
Eco-friendly solution processing and the low-cost synthesis of photoactive materials are important requirements for the commercialization of organic solar cells (OSCs). Although varieties of aqueous-soluble acceptors have been developed, the availability of aqueous-processable polymer donors remains quite limited. In particular, the generally shallow highest occupied molecular orbital (HOMO) energy levels of existing polymer donors limit further increases in the power conversion efficiency (PCE). Here, we design and synthesize two water/alcohol-processable polymer donors, poly[(thiophene-2,5-diyl)-alt-(2-((13-(2,5,8,11-tetraoxadodecyl)-2,5,8,11-tetraoxatetradecan-14-yl)oxy)-6,7-difluoroquinoxaline-5,8-diyl)] (P(Qx8O-T) ) and poly[(selenophene-2,5-diyl)-alt-(2-((13-(2,5,8,11-tetraoxadodecyl)-2,5,8,11-tetraoxatetradecan-14-yl)oxy)-6,7-difluoroquinoxaline-5,8-diyl)] (P(Qx8O-Se)) with oligo(ethylene glycol) (OEG) side chains, having deep HOMO energy levels (∼-5.4 eV). The synthesis of the polymers is achieved in a few synthetic and purification steps at reduced cost. The theoretical calculations uncover that the dielectric environmental variations are responsible for the observed band gap lowering in OEG-based polymers compared to their alkylated counterparts. Notably, the aqueous-processed all-polymer solar cells (aq-APSCs) based on P(Qx8O-T) and poly[(N,N'-bis(3-(2-(2-(2-methoxyethoxy)-ethoxy)ethoxy)-2-((2-(2-(2-methoxyethoxy)ethoxy)ethoxy)-methyl)propyl)naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl)-alt-(2,5-thiophene)] (P(NDIDEG-T)) active layer exhibit a PCE of 2.27% and high open-circuit voltage (VOC) approaching 0.8 V, which are among the highest values for aq-APSCs reported to date. This study provides important clues for the design of low-cost, aqueous-processable polymer donors and the fabrication of aqueous-processable OSCs with high VOC.
- Open Access
- 28 November 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 159 (20)
Unveiling the impact of exchange-correlation functionals on the description of key electronic properties of non-fullerene acceptors in organic photovoltaics
Non-fullerene electron acceptors have emerged as promising alternatives to traditional electron-acceptors in the active layers of organic photovoltaics. This is due to their tunable energy levels, optical response in the visible light spectrum, high electron mobility, and photochemical stability. In this study, the electronic properties of two representative non-fullerene acceptors, ITIC and Y5, have been calculated within the framework of density functional theory using a range of hybrid and non-hybrid density functionals. Screened range-separated hybrid (SRSH) approaches were also tested. The results are analyzed in light of the previously reported experimental outcomes. Specifically, we have calculated the oxidation and reduction potentials, fundamental and optical gaps, the highest occupied molecular orbital and lowest unoccupied molecular orbital energies, and exciton binding energies. Additionally, we have investigated the effects of the medium dielectric constant on these properties employing a universal implicit solvent model. It was found that hybrid functionals generally perform poorly in predicting oxidation potentials, while non-hybrid functionals tend to overestimate reduction potentials. The inclusion of a large Hartree–Fock contribution to the global or long range was identified as the source of inaccuracy for many hybrid functionals in predicting both redox potentials and the fundamental and optical gaps. Corroborating with the available literature, ∼50% of all tested functionals predicted very small exciton binding energies, within the range of ±0.1 eV, that become even smaller by increasing the dielectric constant of the material. Finally, the OHSE2PBE and tHCTHhyb functionals and the optimal tuning SRSH approach emerged as the best-performing methods, with good accuracy in the description of the electronic properties of interest.
- 28 November 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 159 (20)
Open AccessUnveiling the impact of exchange-correlation functionals on the description of key electronic properties of non-fullerene acceptors in organic photovoltaics
Non-fullerene electron acceptors have emerged as promising alternatives to traditional electron-acceptors in the active layers of organic photovoltaics. This is due to their tunable energy levels, optical response in the visible light spectrum, high electron mobility, and photochemical stability. In this study, the electronic properties of two representative non-fullerene acceptors, ITIC and Y5, have been calculated within the framework of density functional theory using a range of hybrid and non-hybrid density functionals. Screened range-separated hybrid (SRSH) approaches were also tested. The results are analyzed in light of the previously reported experimental outcomes. Specifically, we have calculated the oxidation and reduction potentials, fundamental and optical gaps, the highest occupied molecular orbital and lowest unoccupied molecular orbital energies, and exciton binding energies. Additionally, we have investigated the effects of the medium dielectric constant on these properties employing a universal implicit solvent model. It was found that hybrid functionals generally perform poorly in predicting oxidation potentials, while non-hybrid functionals tend to overestimate reduction potentials. The inclusion of a large Hartree–Fock contribution to the global or long range was identified as the source of inaccuracy for many hybrid functionals in predicting both redox potentials and the fundamental and optical gaps. Corroborating with the available literature, ∼50% of all tested functionals predicted very small exciton binding energies, within the range of ±0.1 eV, that become even smaller by increasing the dielectric constant of the material. Finally, the OHSE2PBE and tHCTHhyb functionals and the optimal tuning SRSH approach emerged as the best-performing methods, with good accuracy in the description of the electronic properties of interest.
- Open Access
- 5 October 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (41) , 38101-38110
Unveiling the Three-Step Model for the Interaction of Imidazolium-Based Ionic Liquids on Albumin
The effect of the ionic liquids (ILs) 1-methyl-3-tetradecylimidazolium chloride ([C14MIM][Cl]), 1-dodecyl-3-methylimidazolium chloride ([C12MIM][Cl]), and 1-decyl-methylimidazolium chloride ([C10MIM][Cl]) on the structure of bovine serum albumin (BSA) was investigated by fluorescence spectroscopy, ultraviolet-visible (UV-vis) spectroscopy, small-angle X-ray scattering (SAXS), and molecular dynamics (MD) simulations. Concerning the fluorescence measurements, we observed a blue shift and a fluorescence quenching as the IL concentration increased in the solution. Such behavior was observed for all three studied imidazolium-based ILs, being larger as the number of methylene groups in the alkyl chain increased. UV-vis absorbance measurements indicate that even at relatively small IL/protein ratios, like 1:1 or 1:2, ([C14MIM][Cl]) is able to change, at least partially, the sample turbidity. SAXS results agree with the spectroscopic techniques and suggest that the proteins underwent partial unfolding, evidenced by an increase in the radius of gyration (Rg) of the scattering particle. In the absence and presence of ([C14MIM][Cl]) = 3 mM BSA Rg increases from 29.1 to 45.1 Å, respectively. Together, these results indicate that the interaction of BSA with ILs is divided into three stages: the first stage is characterized by the protein in its native form. It takes place for protein/IL ≤ 1:2, and the interaction is predominantly due to the electrostatic forces provided by the negative charges on the surface of BSA and the cationic polar head of the ILs. In the second stage, higher IL concentrations induce the unfolding of the protein, most likely inducing the unfolding of domains I and III, in such a way that the protein's secondary structure is kept almost unaltered. In the last stage, IL micelles start to form, and therefore, the interaction with protein reaches a saturation point and free micelles may be formed. We believe that this work provides new information about the interaction of ILs with BSA.
- 5 October 2023
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (41) , 38101-38110
Open AccessUnveiling the Three-Step Model for the Interaction of Imidazolium-Based Ionic Liquids on Albumin
The effect of the ionic liquids (ILs) 1-methyl-3-tetradecylimidazolium chloride ([C14MIM][Cl]), 1-dodecyl-3-methylimidazolium chloride ([C12MIM][Cl]), and 1-decyl-methylimidazolium chloride ([C10MIM][Cl]) on the structure of bovine serum albumin (BSA) was investigated by fluorescence spectroscopy, ultraviolet-visible (UV-vis) spectroscopy, small-angle X-ray scattering (SAXS), and molecular dynamics (MD) simulations. Concerning the fluorescence measurements, we observed a blue shift and a fluorescence quenching as the IL concentration increased in the solution. Such behavior was observed for all three studied imidazolium-based ILs, being larger as the number of methylene groups in the alkyl chain increased. UV-vis absorbance measurements indicate that even at relatively small IL/protein ratios, like 1:1 or 1:2, ([C14MIM][Cl]) is able to change, at least partially, the sample turbidity. SAXS results agree with the spectroscopic techniques and suggest that the proteins underwent partial unfolding, evidenced by an increase in the radius of gyration (Rg) of the scattering particle. In the absence and presence of ([C14MIM][Cl]) = 3 mM BSA Rg increases from 29.1 to 45.1 Å, respectively. Together, these results indicate that the interaction of BSA with ILs is divided into three stages: the first stage is characterized by the protein in its native form. It takes place for protein/IL ≤ 1:2, and the interaction is predominantly due to the electrostatic forces provided by the negative charges on the surface of BSA and the cationic polar head of the ILs. In the second stage, higher IL concentrations induce the unfolding of the protein, most likely inducing the unfolding of domains I and III, in such a way that the protein's secondary structure is kept almost unaltered. In the last stage, IL micelles start to form, and therefore, the interaction with protein reaches a saturation point and free micelles may be formed. We believe that this work provides new information about the interaction of ILs with BSA.
- 13 September 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 127 (38) , 7937-7942
Unraveling the Impact of Flexibility and Solvent Effects on the UV–Vis Absorption Spectrum of Subphthalocyanine in Liquid Chloroform within the Born–Oppenheimer Molecular Dynamics Approach
A study based on Born-Oppenheimer molecular dynamics (BOMD) of the subphthalocyanine (SubPc) with a chloride attached to the central boron atom was carried out. The BOMD simulation is used to access the dynamic evolution of the SubPc in liquid chloroform, and the electronic absorption spectrum is calculated using the Time-Dependent Density Functional Theory (TDDFT) considering explicit solvent models. We show that the conformational changes and solvent effects produce a red shift of the Q-band, where the largest contribution is due to the geometry changes of the symmetric structure of SubPc. A large splitting (0.2 eV) of the first electronic transition is also described, and it originates as a shoulder in the Q-band, which according to previous experimental studies is attributed to a vibronic origin. The red shift is obtained in agreement with experiment within less than 0.1 eV. The splitting is a consequence of the symmetry breaking in the SubPc central ring structure occurring during the molecular dynamics, with a significant contribution to the large red shift and the broadening of the spectrum.
- 13 September 2023
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry A
- Vol. 127 (38) , 7937-7942
Unraveling the Impact of Flexibility and Solvent Effects on the UV–Vis Absorption Spectrum of Subphthalocyanine in Liquid Chloroform within the Born–Oppenheimer Molecular Dynamics Approach
A study based on Born-Oppenheimer molecular dynamics (BOMD) of the subphthalocyanine (SubPc) with a chloride attached to the central boron atom was carried out. The BOMD simulation is used to access the dynamic evolution of the SubPc in liquid chloroform, and the electronic absorption spectrum is calculated using the Time-Dependent Density Functional Theory (TDDFT) considering explicit solvent models. We show that the conformational changes and solvent effects produce a red shift of the Q-band, where the largest contribution is due to the geometry changes of the symmetric structure of SubPc. A large splitting (0.2 eV) of the first electronic transition is also described, and it originates as a shoulder in the Q-band, which according to previous experimental studies is attributed to a vibronic origin. The red shift is obtained in agreement with experiment within less than 0.1 eV. The splitting is a consequence of the symmetry breaking in the SubPc central ring structure occurring during the molecular dynamics, with a significant contribution to the large red shift and the broadening of the spectrum.
- Open Access
- 22 August 2023
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (36) , 24475-24494
Theoretical investigation of solvent and oxidation/deprotonation effects on the electronic structure of a mononuclear Ru-aqua-polypyridine complex in aqueous solution
Ru-aqua complex in water, showcasing Ru atom, coordinated water, and hydrogen bonds on left; UV-Vis spectrum and comparison to experiment on right. QM/MM approach emphasized.
- 22 August 2023
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 25 (36) , 24475-24494
Open AccessTheoretical investigation of solvent and oxidation/deprotonation effects on the electronic structure of a mononuclear Ru-aqua-polypyridine complex in aqueous solution
Ru-aqua complex in water, showcasing Ru atom, coordinated water, and hydrogen bonds on left; UV-Vis spectrum and comparison to experiment on right. QM/MM approach emphasized.
- Open Access
- 18 August 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 159 (7)
Elucidating the conformational change and electronic absorption spectrum of p-dimethylamino-cinnamaldehyde merocyanine across different solvent polarities
We present a theoretical study on the structural and electronic properties of the p-dimethylamino-cinnamaldehyde (DMACA) merocyanine molecule in solvents of different polarities by combining the free energy gradient and the average solvent electrostatic configuration methods via an iterative procedure based on the sequential quantum mechanics/molecular mechanics hybrid methodology. Studying such a system in solution is a crucial step for understanding the solvent effects on its properties, which can have implications in fields such as optoelectronics and biophysics. We found that the DMACA molecule presents different geometries in nonpolar and polar solvents, changing from a polyene-like structure with a pyramidal dimethylamino group (in gas phase or nonpolar solvents) to a cyanine-like structure with a planar dimethylamino group in water due to the stabilizing effect of hydrogen bonds between DMACA and water. The molecular absorption spectrum showed a significant change, increasing solvent polarity with a large shift of the lower energy band, while the other two low lying bands did not shift significantly. The study accurately described the solvatochromic shift of the lowest-energy band and analyzed the structure of the excited states in terms of the one-electron transition density matrix, which showed that the dominant excited state (associated with the first lower energy band) is characterized by a local excitation on the benzene ring with charge transfer character to the carbon conjugated segment.
- 18 August 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 159 (7)
Open AccessElucidating the conformational change and electronic absorption spectrum of p-dimethylamino-cinnamaldehyde merocyanine across different solvent polarities
We present a theoretical study on the structural and electronic properties of the p-dimethylamino-cinnamaldehyde (DMACA) merocyanine molecule in solvents of different polarities by combining the free energy gradient and the average solvent electrostatic configuration methods via an iterative procedure based on the sequential quantum mechanics/molecular mechanics hybrid methodology. Studying such a system in solution is a crucial step for understanding the solvent effects on its properties, which can have implications in fields such as optoelectronics and biophysics. We found that the DMACA molecule presents different geometries in nonpolar and polar solvents, changing from a polyene-like structure with a pyramidal dimethylamino group (in gas phase or nonpolar solvents) to a cyanine-like structure with a planar dimethylamino group in water due to the stabilizing effect of hydrogen bonds between DMACA and water. The molecular absorption spectrum showed a significant change, increasing solvent polarity with a large shift of the lower energy band, while the other two low lying bands did not shift significantly. The study accurately described the solvatochromic shift of the lowest-energy band and analyzed the structure of the excited states in terms of the one-electron transition density matrix, which showed that the dominant excited state (associated with the first lower energy band) is characterized by a local excitation on the benzene ring with charge transfer character to the carbon conjugated segment.
- Open Access
- 31 July 2023
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 35 (16) , 6382-6395
Mass Transport in “Water-in-Polymer Salt” Electrolytes
- 31 July 2023
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 35 (16) , 6382-6395
Open AccessMass Transport in “Water-in-Polymer Salt” Electrolytes
- Open Access
- 13 July 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 159 (2)
Calculation of the one- and two-photon absorption spectra of water-soluble stilbene derivatives using a multiscale QM/MM approach
We calculated the one- (OPA) and two-photon absorption (TPA) spectra of two large water-soluble stilbene derivatives presenting TPA cross sections of about 400 GM. However, the reported experimental TPA spectra present a spectral gap region, and a theoretical study of these promising molecules seems now timely and relevant. These molecules are composed of 200 or more atoms, becoming a challenge to obtain the TPA spectra even using density functional theory at the time-dependent quadratic response formalism. Thus, both OPA and TPA were also calculated using the INDO-S semi-empirical method. We used explicit solvent molecules using the sequential-quantum mechanics/molecular mechanics to include the solvent effects. Our results show that different transitions are participating in the OPA and TPA processes and that exchange–correlation functionals, including larger Hartree–Fock contributions, provide a better description of the OPA spectra; however, the opposite trend is observed on the TPA spectra. Alternatively, INDO-S/CISD, including contributions from single and double excitations, systematically describes both OPA and TPA bands with similar shifts and better reproduces the relative intensities of the two TPA bands compared to the experimental ones. The OPA spectra are characterized by a Highest Occupied Molecular Orbital-Lowest Unoccupied Molecular Orbital (HOMO–LUMO) excitation, while the low-energy TPA band is ascribed to a single transition encompassing the (HOMO-1)–LUMO and HOMO–(LUMO+1) excitations and the high-energy one is a combination of several transitions. Thus, although more studies are required to better assess the capability of the INDO-S/CISD method in describing the TPA spectra of large molecules, our results corroborate that it is a promising alternative.
- 13 July 2023
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 159 (2)
Open AccessCalculation of the one- and two-photon absorption spectra of water-soluble stilbene derivatives using a multiscale QM/MM approach
We calculated the one- (OPA) and two-photon absorption (TPA) spectra of two large water-soluble stilbene derivatives presenting TPA cross sections of about 400 GM. However, the reported experimental TPA spectra present a spectral gap region, and a theoretical study of these promising molecules seems now timely and relevant. These molecules are composed of 200 or more atoms, becoming a challenge to obtain the TPA spectra even using density functional theory at the time-dependent quadratic response formalism. Thus, both OPA and TPA were also calculated using the INDO-S semi-empirical method. We used explicit solvent molecules using the sequential-quantum mechanics/molecular mechanics to include the solvent effects. Our results show that different transitions are participating in the OPA and TPA processes and that exchange–correlation functionals, including larger Hartree–Fock contributions, provide a better description of the OPA spectra; however, the opposite trend is observed on the TPA spectra. Alternatively, INDO-S/CISD, including contributions from single and double excitations, systematically describes both OPA and TPA bands with similar shifts and better reproduces the relative intensities of the two TPA bands compared to the experimental ones. The OPA spectra are characterized by a Highest Occupied Molecular Orbital-Lowest Unoccupied Molecular Orbital (HOMO–LUMO) excitation, while the low-energy TPA band is ascribed to a single transition encompassing the (HOMO-1)–LUMO and HOMO–(LUMO+1) excitations and the high-energy one is a combination of several transitions. Thus, although more studies are required to better assess the capability of the INDO-S/CISD method in describing the TPA spectra of large molecules, our results corroborate that it is a promising alternative.