Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Eun-Sung Lee has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Experimental Study on the Ignition Characteristics of Scramjet Combustor with Tandem Cavities Using Micro-Pulse Detonation Engine

    by Min-Su Kim, In-Hoi Koo, Keon-Hyeong Lee, Eun-Sung Lee, Hyung-Seok Han, Seung-Min Jeong, Holak Kim, Jeong-Yeol Choi

    This experimental investigation focused on the ignition and combustion characteristics of a tandem cavity-based scramjet combustor with side-by-side identical cavities. This study utilized the Pusan National University-direct connect scramjet combustor (PNU-DCSC), which was capable of simulating flight conditions at Mach number 4.0–5.0 and altitudes of 20–25 km using the vitiated air heater (VAH). The combustion tests were conducted under off-design point conditions corresponding to low inlet enthalpy. It is a condition in which self-ignition does not occur, and a micro pulse detonation engine (μPDE) ignitor is used. The results revealed that as the injection pressure of the gaseous hydrogen fuel (GH2) and the corresponding equivalence ratio increased, the combustion mode transitioned from the cavity-shear layer flame to the jet-wake flame. Furthermore, the measured wall static pressure profiles along the isolator and scramjet combustor indicated that the region of elevated pressure distribution caused by the shock train expanded upstream with higher equivalence ratios. When ignited from the secondary cavity, the combustion area did not extend to the primary cavity at lower equivalence ratios, while it expanded upstream faster with higher equivalence ratios. Therefore, the combustion characteristics of the tandem cavity were found to vary based on the overall equivalence ratio of the main fuel (GH2) and ignition position.


  • Open Access

    A Study on a Vitiated Air Heater for a Direct-Connect Scramjet Combustor and Preliminary Test on the Scramjet Combustor Ignition

    by Jae-Hyuk Lee, Eun-Sung Lee, Hyung-Seok Han, Min-Su Kim, Jeong-Yeol Choi

    Vitiation air heater (VAH) combustion characteristics for a direct-connect scramjet combustor (DCSC) were experimentally studied. The VAH consists of a head, modular chamber, and circular-to-rectangular shape transition (CRST) nozzle. The CRST nozzle transforms the circular cross-sectioned rocket-type VAH into a rectangular cross-sectioned scramjet combustor. The CRST nozzle exit Mach numbers at the top, middle, and bottom were measured using a tungsten wedge. The oblique shock formed by the wedge was captured using Schlieren visualization and recorded with a high-speed camera. The θ-β-M relation showed that the exit Mach number was 2.04 ± 0.04 with a chamber pressure of 1.685 ± 0.07 MPa. With the VAH design point verified, preliminary scramjet combustor ignition tests were conducted. As the fuel was not auto-ignited by the vitiated air, the forced ignition method, in which VAH ignition flame ignites the scramjet fuel, was used. The Schlieren images showed that a cavity shear layer combustion mode was formed and also showed that the forced ignition method could be used as a reference model for the ignitor-ignition method.


  • Open Access

    Experimental Proof of Concept of a Noncircular Rotating Detonation Engine (RDE) for Propulsion Applications

    by Jae-Hyuk Lee, Jae-Hoon Ryu, Eun-Sung Lee, Hyung-Seok Han, Jeong-Yeol Choi

    A noncircular engine cross-section could provide great flexibility in the integration of propulsion into the airframe. In this work, a tri-arc RDE was constructed and tested as an example of noncircular cross-sectioned RDE. The operational characteristics of detonation wave propagation and thrust performance were investigated and compared with an equivalent circular RDE under the same operating conditions. High-speed camera images, short-time Fourier transform (STFT), and fast Fourier transform (FFT) were used for the investigation. The tri-arc RDE showed very similar characteristics to the circular RDE but exhibited slightly better stability and propulsion performance than the circular RDE. We consider that repeated curvature changes positively affect the stability of detonation wave propagation. The experimental data show contradicting results from the numerical analysis with a homogeneous mixture assumption in which the detonation pressures at the convex corner were greater than those at the concave corner. It is reasoned that the tri-arc injector design provides a non-uniform mixture composition, resulting in a strong detonation at the convex corner. Overall, the noncircular RDE of a tri-arc shaped cross-section is demonstrated, one which performs slightly better than an ordinary circular-shaped RDE both in detonation stability and performance.


  • Open Access

    Experimental Investigation of Detonation Propagation Modes and Thrust Performance in a Small Rotating Detonation Engine Using C2H4/O2 Propellant

    by Hyung-Seok Han, Eun Sung Lee, Jeong-Yeol Choi

    A small rotating detonation engine (RDE) model and the corresponding experimental setup were constructed for the experimental investigation of the detonation propagation characteristics and thrust performance of a circular RDE. Experiments were conducted at a range of 0.3–2.5 equivalence ratio with a total mass flow rate of less than 180.0 g/s using a C2H4/O2 mixture. Irregularly unstable detonative combustion occurs immediately after the detonation initiation, which includes initiation, propagation, decaying, and the merging of detonation waves. Following this, periodically unsteady detonative combustion occurs in the circular channel, resulting in the stable operation of the RDE. During stable operation, two detonation waves are predominant, rotating along the wall at a speed lower than the Chapman–Jouguet (CJ) detonation speed. The characteristic velocity efficiency is approximately 73% on average. The low characteristic velocity efficiency is presumed to be caused by the unoptimized combustion channel and the poor mixing efficiency owing to the two-dimensional injector configuration. The effect of the RDE component design and the RDE flow field characteristics need to be further investigated for improving the performance of the RDE.