Marc Jofre
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Marc Jofre has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Luis Jofre-Roca
Department Signal Theory and Communications, Universitat Politcnica de Catalunya - BarcelonaTech (UPC), Barcelona, Spain
14 shared publications - Jordi Romeu
Universitat Politecnica de Catalunya
12 shared publications - César Palacios Arias
Department of Signal Theory and Communications, Technical University of Catalonia, Barcelona, Spain
6 shared publications - Lluís Jofre
Universitat Politecnica de Catalunya
5 shared publications - Otman El Mrabet
Abdelmalek Essaadi University
4 shared publications - Youness Akazzim
School of Telecommunication Engineering, Universitat Politècnica de Catalunya, 08034 Barcelona, Spain
4 shared publications
Latest Publications
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (21) , 32409-32420
Nonlinear Microwave Microfluidic High-Sensitivity Triresonant Biosensor for Discrimination of Functional States of the E. coli
- 1 November 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 26 (21) , 32409-32420
Nonlinear Microwave Microfluidic High-Sensitivity Triresonant Biosensor for Discrimination of Functional States of the E. coli
- Open Access
- 28 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Selected Areas in Communications
- Vol. 44 (07338716) , 4748-4758
Multiplane Sub-Nanosecond Timing via SyncE/PTP Enabling 12.5 Mqb/s Synchronous TDMA in Quantum Networks
Telecom standards efficiently enable time synchronization mechanisms in multi-node Quantum Networks (QNs) by combining Synchronous Ethernet (SyncE) and Precision Time Protocol (PTP). The architecture explored in this work utilizes SyncE to provide all connected nodes with a stable and precise frequency reference, adjustable in the range from 1 Hz to 125MHz, obtaining sub-nanosecond temporal jitter in the real-time/quantum plane. This reference is complemented with PTP to provide a distributed time reference for synchronization with a microsecond-level temporal allocation capability. In particular, in the control plane, PTP enables time division multiple access (TDMA) for sharing the quantum channel in multi-node quantum networks QNs. It is demonstrated that the proposed architecture achieves nanosecond synchronous transfer in the real-time/quantum plane and allocates microsecond time windows through the control plane. The theoretical model and experimental results validate performing common quantum communications operations with 98% fidelity and 10−2 quantum bit error rate (QBER) at an emission rate of 12.5 Mqb/s. The results confirm that SyncE/PTP synchronization is a viable and scalable solution for future multi-node QN infrastructures.
- 28 May 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal on Selected Areas in Communications
- Vol. 44 (07338716) , 4748-4758
Open AccessMultiplane Sub-Nanosecond Timing via SyncE/PTP Enabling 12.5 Mqb/s Synchronous TDMA in Quantum Networks
Telecom standards efficiently enable time synchronization mechanisms in multi-node Quantum Networks (QNs) by combining Synchronous Ethernet (SyncE) and Precision Time Protocol (PTP). The architecture explored in this work utilizes SyncE to provide all connected nodes with a stable and precise frequency reference, adjustable in the range from 1 Hz to 125MHz, obtaining sub-nanosecond temporal jitter in the real-time/quantum plane. This reference is complemented with PTP to provide a distributed time reference for synchronization with a microsecond-level temporal allocation capability. In particular, in the control plane, PTP enables time division multiple access (TDMA) for sharing the quantum channel in multi-node quantum networks QNs. It is demonstrated that the proposed architecture achieves nanosecond synchronous transfer in the real-time/quantum plane and allocates microsecond time windows through the control plane. The theoretical model and experimental results validate performing common quantum communications operations with 98% fidelity and 10−2 quantum bit error rate (QBER) at an emission rate of 12.5 Mqb/s. The results confirm that SyncE/PTP synchronization is a viable and scalable solution for future multi-node QN infrastructures.
- 19 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
- Vol. 10 (2) , 242-252
Split-Ring Resonator Based Microwave Microfluidic Biosensor for Single Bioparticle Position Location and Live/Dead Cell Differentiation
This paper presents a novel microwave biosensor integrated with a microfluidic platform for the label-free detection and differentiation of biological particles, including live and dead Escherichia coli (E. coli). The sensor is based on a 50 $\Omega$ microstrip line coupled to an annular split-ring resonator (SRR), designed and fabricated for a high sensitivity response to changes in the dielectric properties on the bioparticle. The integration with a microfluidic channel allows precise control and delivery of biological samples to the sensing region. Experiments demonstrated the sensor’s ability to detect individual microbeads and distinguish between single live and dead bacterial cells through measurable shifts in resonance frequency. Furthermore, by applying an Inverse Fast Fourier Transform (IFFT) to the differential transmission parameter, the system enables the spatial localization of single particles within the microfluidic channel. The results indicate significant potential for point-of-care diagnostics and environmental monitoring applications, highlighting the advantages of microwave biosensing for real-time, single-particle analysis.
- 19 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Electromagnetics, RF and Microwaves in Medicine and Biology
- Vol. 10 (2) , 242-252
Split-Ring Resonator Based Microwave Microfluidic Biosensor for Single Bioparticle Position Location and Live/Dead Cell Differentiation
This paper presents a novel microwave biosensor integrated with a microfluidic platform for the label-free detection and differentiation of biological particles, including live and dead Escherichia coli (E. coli). The sensor is based on a 50 $\Omega$ microstrip line coupled to an annular split-ring resonator (SRR), designed and fabricated for a high sensitivity response to changes in the dielectric properties on the bioparticle. The integration with a microfluidic channel allows precise control and delivery of biological samples to the sensing region. Experiments demonstrated the sensor’s ability to detect individual microbeads and distinguish between single live and dead bacterial cells through measurable shifts in resonance frequency. Furthermore, by applying an Inverse Fast Fourier Transform (IFFT) to the differential transmission parameter, the system enables the spatial localization of single particles within the microfluidic channel. The results indicate significant potential for point-of-care diagnostics and environmental monitoring applications, highlighting the advantages of microwave biosensing for real-time, single-particle analysis.
- Open Access
- 17 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Quantum Engineering
- Vol. 6, 1-10
Qubit Rate Modulation-Based Time Synchronization Mechanism for Multinode Quantum Networks
The combination of Quantum and Telecommunication networks enables to revolutionize the way we make use of information, offering unparalleled capabilities and making it an ideal choice for many critical applications. In this sense, quantum protocols generally have a unique requirement to have strict time synchronization in order to operate, which generally consume quantum resources of part of the exchanged qubits. Accordingly, in this work we demonstrate and characterize a temporal alignment mechanism for quantum networks based on frequency testing, allowing to preserve the quantum state of qubits. The time synchronization correction achieved is within 100 ns working at 5 MHz with temporal and relative frequency offsets commonly acquired in quantum links using conventional hardware clocks with temporal stability in the range of $10^{-8}$ and 200 ns jitter.
- 17 February 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Quantum Engineering
- Vol. 6, 1-10
Open AccessQubit Rate Modulation-Based Time Synchronization Mechanism for Multinode Quantum Networks
The combination of Quantum and Telecommunication networks enables to revolutionize the way we make use of information, offering unparalleled capabilities and making it an ideal choice for many critical applications. In this sense, quantum protocols generally have a unique requirement to have strict time synchronization in order to operate, which generally consume quantum resources of part of the exchanged qubits. Accordingly, in this work we demonstrate and characterize a temporal alignment mechanism for quantum networks based on frequency testing, allowing to preserve the quantum state of qubits. The time synchronization correction achieved is within 100 ns working at 5 MHz with temporal and relative frequency offsets commonly acquired in quantum links using conventional hardware clocks with temporal stability in the range of $10^{-8}$ and 200 ns jitter.
- Open Access
- 31 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 78014-78023
Nonlinear Microwave Susceptibility Measurements Using Intermodulation Products on a Microfluidic Platform
Measuring the nonlinear responses of living cells has enabled an understanding of their behavior and functionality. Currently, this response has been studied at radio and optical frequencies, leaving an unexplored gap in the microwave field. This study presents a system that combines microwave technology with a microfluidic platform to measure the nonlinear susceptibility of living organisms to electromagnetic fields. The applied technique involved feeding the system with two tones (2.1 GHz and 4 GHz) to generate third-order intermodulation products (PIMP) at 5.9 GHz. Nonlinear susceptibility was measured from the power levels of PIMP using a spectrum analyzer. Broadband electrodes based on slot bowtie geometry were manufactured to operate at 5 GHz with a bandwidth of 4 GHz. Additionally, an engineering process is presented to optimize the power of the internal mixer of the spectrum analyzer to obtain the maximum dynamic range and improve the sensitivity of the system. Nonlinear susceptibility to microwaves was analyzed in four samples, including pure ethanol, a mixture of ethanol and dimethyl-sulfoxide (DMSO), live Escherichia coli (E. coli), and heat-killed E. coli. The results show that ethanol has zero nonlinear susceptibility, whereas when it is mixed with DMSO, a nonlinear response appears with a value of 4 dB with respect to the nonlinear susceptibility of the system in the absence of a sample. Finally, the nonlinear susceptibility of live E. coli to microwaves was detected with a difference of 8 dB over the reference value and 6 dB with respect to the heat-killed E. coli sample.
- 31 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 78014-78023
Open AccessNonlinear Microwave Susceptibility Measurements Using Intermodulation Products on a Microfluidic Platform
Measuring the nonlinear responses of living cells has enabled an understanding of their behavior and functionality. Currently, this response has been studied at radio and optical frequencies, leaving an unexplored gap in the microwave field. This study presents a system that combines microwave technology with a microfluidic platform to measure the nonlinear susceptibility of living organisms to electromagnetic fields. The applied technique involved feeding the system with two tones (2.1 GHz and 4 GHz) to generate third-order intermodulation products (PIMP) at 5.9 GHz. Nonlinear susceptibility was measured from the power levels of PIMP using a spectrum analyzer. Broadband electrodes based on slot bowtie geometry were manufactured to operate at 5 GHz with a bandwidth of 4 GHz. Additionally, an engineering process is presented to optimize the power of the internal mixer of the spectrum analyzer to obtain the maximum dynamic range and improve the sensitivity of the system. Nonlinear susceptibility to microwaves was analyzed in four samples, including pure ethanol, a mixture of ethanol and dimethyl-sulfoxide (DMSO), live Escherichia coli (E. coli), and heat-killed E. coli. The results show that ethanol has zero nonlinear susceptibility, whereas when it is mixed with DMSO, a nonlinear response appears with a value of 4 dB with respect to the nonlinear susceptibility of the system in the absence of a sample. Finally, the nonlinear susceptibility of live E. coli to microwaves was detected with a difference of 8 dB over the reference value and 6 dB with respect to the heat-killed E. coli sample.
- 12 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (4) , 3064-3072
Magnetoelectric Dipole Antenna Framework Supporting Orbital Angular Momentum Modes
The ability to utilize resources to meet the need of growing diversity of communication services and user behavior marks the future of cognitive wireless communication systems. Cognitive wireless technologies for vehicular communications, in combination with Orbital Angular Momentum (OAM) modes aim at extending Non-Line-Of-Sight (NLOS) short-distance communications for smart mobility. In this regard, OAM antenna frameworks need to be developed to support these technologies. In this work, we describe a magnetoelectric dipole antenna framework supporting OAM modes. The framework is derived from moment tensors of specific vector spherical harmonic functions synthesized from dipoles. The antenna framework is discussed in terms of OAM generation, and it is validated numerically and experimentally for l = 1 OAM mode, achieving more than 500MHz operation bandwidth at the frequency of operation of 3.5GHz. Also, for l = 1 OAM mode, the null aligns precisely with the anticipated dimensions numerically computed.
- 12 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (4) , 3064-3072
Magnetoelectric Dipole Antenna Framework Supporting Orbital Angular Momentum Modes
The ability to utilize resources to meet the need of growing diversity of communication services and user behavior marks the future of cognitive wireless communication systems. Cognitive wireless technologies for vehicular communications, in combination with Orbital Angular Momentum (OAM) modes aim at extending Non-Line-Of-Sight (NLOS) short-distance communications for smart mobility. In this regard, OAM antenna frameworks need to be developed to support these technologies. In this work, we describe a magnetoelectric dipole antenna framework supporting OAM modes. The framework is derived from moment tensors of specific vector spherical harmonic functions synthesized from dipoles. The antenna framework is discussed in terms of OAM generation, and it is validated numerically and experimentally for l = 1 OAM mode, achieving more than 500MHz operation bandwidth at the frequency of operation of 3.5GHz. Also, for l = 1 OAM mode, the null aligns precisely with the anticipated dimensions numerically computed.
- Open Access
- 15 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (3) , 3844-3852
UWB Microwave Functional Brain Activity Extraction for Parkinson’s Disease Monitoring
Microwaves have proven their imaging capabilities to visualize the body composition for medical applications thanks to their penetration inside biological structures. In this context, this paper presents a novel methodology that aims to extract not just the internal morphology but also the brain’s functional activity using the UWB Pulse Amplitude Modulation (PAM) technique to have simultaneously functional monitoring and imaging capability and apply it to monitor the Parkinson’s disease. The radiofrequency system is composed of two orthogonal sets of double UWB probes operating in the frequency range of 0.5 GHz - 1.5 GHz. An experimental set-up has been devised that avoids complex in-vivo testing, albeit allows a system proof-of-concept validation. A bio-tag consisting of an optically modulated photodiode is used to emulate local medium changes associated to cell activity. The proposed system is used to first extract the modeled brain Action Potential (AP) to validate the performance of the bio-tag, and then to monitor the Parkinson’s disease (PD) based on the beta frequency band character within basal ganglia–thalamocortical (BGTC) which is a key marker for the PD. The results show a good capability of locating and differentiating the signals generated within the phantom by the bio-tag, alternatively emulating the healthy and PD’s state, based on the frequency. The obtained results of the functional monitoring technique on distinguishing the healthy from non-healthy brain model activity, as well as in the phantom mimicking the average proprieties of a human head, will serve as a basis for detecting functional diseases in the future.
- 15 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (3) , 3844-3852
Open AccessUWB Microwave Functional Brain Activity Extraction for Parkinson’s Disease Monitoring
Microwaves have proven their imaging capabilities to visualize the body composition for medical applications thanks to their penetration inside biological structures. In this context, this paper presents a novel methodology that aims to extract not just the internal morphology but also the brain’s functional activity using the UWB Pulse Amplitude Modulation (PAM) technique to have simultaneously functional monitoring and imaging capability and apply it to monitor the Parkinson’s disease. The radiofrequency system is composed of two orthogonal sets of double UWB probes operating in the frequency range of 0.5 GHz - 1.5 GHz. An experimental set-up has been devised that avoids complex in-vivo testing, albeit allows a system proof-of-concept validation. A bio-tag consisting of an optically modulated photodiode is used to emulate local medium changes associated to cell activity. The proposed system is used to first extract the modeled brain Action Potential (AP) to validate the performance of the bio-tag, and then to monitor the Parkinson’s disease (PD) based on the beta frequency band character within basal ganglia–thalamocortical (BGTC) which is a key marker for the PD. The results show a good capability of locating and differentiating the signals generated within the phantom by the bio-tag, alternatively emulating the healthy and PD’s state, based on the frequency. The obtained results of the functional monitoring technique on distinguishing the healthy from non-healthy brain model activity, as well as in the phantom mimicking the average proprieties of a human head, will serve as a basis for detecting functional diseases in the future.
- 29 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-10
Microwave Contactless Current-Sensing for Live/Dead Differentiation of Single Bioparticles on a Microfluidic Platform
The combination of microwave and microfluidic technologies enables the creation of efficient platforms to rapidly quantify live/dead bioparticles in industrial processes, biomedical research and environmental monitoring applications. In this regard, this work demonstrates the differentiation of single live/dead bioparticles with a microwave-microfluidic platform. The system is composed of a contactless current-sensing superheterodyne architecture with broadband frequency-operation bowtie electrodes. Furthermore, the 20mm × 20mm bowtie electrode has been designed and manufactured with a –10 dB frequency range, from 4GHz to 8GHz, and capable of confining the electric field in a micrometric volume. The gap of the bowtie geometry of the electrodes is adjusted to the dimensions of the 50 μm × 50 μm cross-section and 40mm long microfluidic channel. In particular, 10mL sample with 10 9 bacteria/mL flows through the microchannel at 19.8 μL/min, focused with elasto-inertial effect enhanced with 500 ppm of polyethylene oxide. Accordingly, from the signal captured by the electrodes, the energy variation of the applied electric field produced by the bioparticles is sensed by a current-based transimpedance amplifier. Here, the incorporation of the transimpedance amplifier in the measurement system improves the SNR by 4 dB. In addition, the superheterodyne transceiver has been optimized in terms of local oscillator power and bandwidth. Furthermore, the microfluidic system has been adjusted so that the balance of hydrodynamic forces confines bioparticles at the centerline of the microchannel within less than 5 μm. As a result, the system measures the cytoplasmic content of live and dead flowing bacteria with a difference of 6 dB and relative deviation of 3.2%.
- 29 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 72 (00189456) , 1-10
Microwave Contactless Current-Sensing for Live/Dead Differentiation of Single Bioparticles on a Microfluidic Platform
The combination of microwave and microfluidic technologies enables the creation of efficient platforms to rapidly quantify live/dead bioparticles in industrial processes, biomedical research and environmental monitoring applications. In this regard, this work demonstrates the differentiation of single live/dead bioparticles with a microwave-microfluidic platform. The system is composed of a contactless current-sensing superheterodyne architecture with broadband frequency-operation bowtie electrodes. Furthermore, the 20mm × 20mm bowtie electrode has been designed and manufactured with a –10 dB frequency range, from 4GHz to 8GHz, and capable of confining the electric field in a micrometric volume. The gap of the bowtie geometry of the electrodes is adjusted to the dimensions of the 50 μm × 50 μm cross-section and 40mm long microfluidic channel. In particular, 10mL sample with 10 9 bacteria/mL flows through the microchannel at 19.8 μL/min, focused with elasto-inertial effect enhanced with 500 ppm of polyethylene oxide. Accordingly, from the signal captured by the electrodes, the energy variation of the applied electric field produced by the bioparticles is sensed by a current-based transimpedance amplifier. Here, the incorporation of the transimpedance amplifier in the measurement system improves the SNR by 4 dB. In addition, the superheterodyne transceiver has been optimized in terms of local oscillator power and bandwidth. Furthermore, the microfluidic system has been adjusted so that the balance of hydrodynamic forces confines bioparticles at the centerline of the microchannel within less than 5 μm. As a result, the system measures the cytoplasmic content of live and dead flowing bacteria with a difference of 6 dB and relative deviation of 3.2%.
- Open Access
Optically Pumped Magnetometer with High Spatial Resolution Magnetic Guide for the Detection of Magnetic Droplets in a Microfluidic Channel
Quantum sensors provide unprecedented magnetic field detection sensitivities, enabling these to extend the common magnetometry range of applications and environments of operation. In this framework, many applications also require high spatial resolution magnetic measurements for biomedical research, environmental monitoring and industrial production. In this regard, Optically Pumped Magnetometers (OPMs) are considered as prominent candidates, but are impaired in size with micrometer scale magnetic particles, e.g. magnetic droplets. In order to address this limitation, here we study the effects of adding a micrometer-to-millimeter magnetic guide to a miniature OPM. This device is applied to detect Fe3O4 magnetic droplets flowing at rates up to $25$ drop./s in a microfluidic channel. The computed spatial resolution is $300$ $μ$m and the measured SNR is larger than $15$ dB for the different sizes of considered magnetic droplets.Open AccessOptically Pumped Magnetometer with High Spatial Resolution Magnetic Guide for the Detection of Magnetic Droplets in a Microfluidic Channel
Quantum sensors provide unprecedented magnetic field detection sensitivities, enabling these to extend the common magnetometry range of applications and environments of operation. In this framework, many applications also require high spatial resolution magnetic measurements for biomedical research, environmental monitoring and industrial production. In this regard, Optically Pumped Magnetometers (OPMs) are considered as prominent candidates, but are impaired in size with micrometer scale magnetic particles, e.g. magnetic droplets. In order to address this limitation, here we study the effects of adding a micrometer-to-millimeter magnetic guide to a miniature OPM. This device is applied to detect Fe3O4 magnetic droplets flowing at rates up to $25$ drop./s in a microfluidic channel. The computed spatial resolution is $300$ $μ$m and the measured SNR is larger than $15$ dB for the different sizes of considered magnetic droplets.