Karuppiah Diwakar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Karuppiah Diwakar has a total of 23 co-authors. Here are the top co-authors by number of shared publications:
- Marimuthu Sivakumar
#120, Energy Materials Lab, Department of Physics, Science Block, Alagappa University, Karaikudi 630003, Tamil Nadu, India
13 shared publications - Palanisamy Rajkumar
Department of Mechanical Engineering, Yeungnam University, Gyeongsan-si, Gyeongbuk-do 38541, Republic of Korea
11 shared publications - Chia-Hung Huang
Metal Industries Research and Development Centre, Kaohsiung 81160, Taiwan
4 shared publications - Wei-Ren Liu
Department of Chemical Engineering, R&D Center for Membrane Technology, Chung Yuan Christian University, 200 Chung Pei Road, Chungli District, Taoyuan City 32023, Taiwan
4 shared publications - Arjunan Ponnaiah
#120, Energy Materials Lab, Department of Physics, Science Block, Alagappa University, Karaikudi 630 003, Tamil Nadu, India
3 shared publications R. Subadevi
3 shared publications
Latest Publications
- 16 September 2021
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 4 (9) , 9692-9700
Effect of Tungsten and Carbon in Germanium Oxide as a High-Performance Electrode for Energy Storage Applications
- 16 September 2021
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 4 (9) , 9692-9700
Effect of Tungsten and Carbon in Germanium Oxide as a High-Performance Electrode for Energy Storage Applications
- 12 June 2020
- Published by Springer Nature in Applied Physics A
- Vol. 126 (7) , 1-8
An imprint of sulfur/SiO2 in N-doped graphene as positive electrode for lithium–sulfur rechargeable batteries
- 12 June 2020
- Published by Springer Nature in Applied Physics A
- Vol. 126 (7) , 1-8
An imprint of sulfur/SiO2 in N-doped graphene as positive electrode for lithium–sulfur rechargeable batteries
- 11 May 2020
- Published by Wiley in International Journal of Energy Research
- Vol. 44 (9) , 7591-7602
Cobalt‐doped layered lithium nickel oxide as a three‐in‐one electrode for lithium‐ion and sodium‐ion batteries and supercapacitor applications
- 11 May 2020
- Published by Wiley in International Journal of Energy Research
- Vol. 44 (9) , 7591-7602
Cobalt‐doped layered lithium nickel oxide as a three‐in‐one electrode for lithium‐ion and sodium‐ion batteries and supercapacitor applications
- 28 April 2020
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 53 (26) , 265501
Micro-/mesoporous nature of carbon nanofiber/silica matrix as an effective sulfur host for rechargeable lithium–sulfur batteries
Lithium–sulfur batteries are considered as promising candidate for next-generation electric vehicles due to their high-energy density and cyclability behaviour. However, the poor conductivity, large volumetric expansion of sulfur and dissolution of the intermediate polysulfides result in poor cyclic stability. Herein, sulfur–silica–carbon nanofiber (S–SiO 2 –CNF) based ternary composite cathode materials are prepared via simple heat treatment for lithium–sulfur batteries. The prepared materials are physically subjected to x-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, surface area and porosity analyses. The prepared S–SiO 2 –CNF cathode material exhibits an initial discharge capacity of 801 mAh g −1 at 0.2 C with a decay rate of 0.18% per cycle up to 300 cycles. The significantly enhanced electrochemical performance of the S–SiO 2 –CNF cathode is ascribed to the micro and mesoporous nature of prepared material and binding nature of silica, which restricting the volume changes of active material and limits the polysulfide dissolution.
- 28 April 2020
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 53 (26) , 265501
Micro-/mesoporous nature of carbon nanofiber/silica matrix as an effective sulfur host for rechargeable lithium–sulfur batteries
Lithium–sulfur batteries are considered as promising candidate for next-generation electric vehicles due to their high-energy density and cyclability behaviour. However, the poor conductivity, large volumetric expansion of sulfur and dissolution of the intermediate polysulfides result in poor cyclic stability. Herein, sulfur–silica–carbon nanofiber (S–SiO 2 –CNF) based ternary composite cathode materials are prepared via simple heat treatment for lithium–sulfur batteries. The prepared materials are physically subjected to x-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, surface area and porosity analyses. The prepared S–SiO 2 –CNF cathode material exhibits an initial discharge capacity of 801 mAh g −1 at 0.2 C with a decay rate of 0.18% per cycle up to 300 cycles. The significantly enhanced electrochemical performance of the S–SiO 2 –CNF cathode is ascribed to the micro and mesoporous nature of prepared material and binding nature of silica, which restricting the volume changes of active material and limits the polysulfide dissolution.
- 14 April 2020
- Published by Springer Nature in JOM
- Vol. 72 (6) , 2260-2268
Enhanced Electrochemical Performance of MWCNT-Intercalated Silica/Sulfur Composite Cathode for Rechargeable Lithium-Sulfur Batteries
- 14 April 2020
- Published by Springer Nature in JOM
- Vol. 72 (6) , 2260-2268
Enhanced Electrochemical Performance of MWCNT-Intercalated Silica/Sulfur Composite Cathode for Rechargeable Lithium-Sulfur Batteries
- Open Access
High Capacity Prismatic Type Layered Electrode with Anionic Redox Activity as an Efficient Cathode Material and PVdF/SiO2 Composite Membrane for a Sodium Ion Battery
A prismatic type layered Na2/3Ni1/3Mn2/3O2 cathode material for a sodium ion battery is prepared via two different methods viz., the solid state and sol–gel method with dissimilar surface morphology and a single phase crystal structure. It shows tremendous electrochemical chattels when studied as a cathode for a sodium-ion battery of an initial specific discharge capacity of 244 mAh g−1 with decent columbic efficiency of 98% up to 250 cycles, between the voltage range from 1.8 to 4.5 V (Na+/Na) at 0.1 C under room temperature. It is much higher than its theoretical value of 173 mAh g−1 and also than in the earlier reports (228 m Ah g−1). The full cell containing this material exhibits 800 mAh g−1 at 0.1 C and withstands until 1000 cycles with the discharge capacity of 164 mAh g−1. The surpassing capacity was expected by the anionic (oxygen) redox process, which elucidates the higher capacity based on the charge compensation phenomenon.
Open AccessHigh Capacity Prismatic Type Layered Electrode with Anionic Redox Activity as an Efficient Cathode Material and PVdF/SiO2 Composite Membrane for a Sodium Ion Battery
A prismatic type layered Na2/3Ni1/3Mn2/3O2 cathode material for a sodium ion battery is prepared via two different methods viz., the solid state and sol–gel method with dissimilar surface morphology and a single phase crystal structure. It shows tremendous electrochemical chattels when studied as a cathode for a sodium-ion battery of an initial specific discharge capacity of 244 mAh g−1 with decent columbic efficiency of 98% up to 250 cycles, between the voltage range from 1.8 to 4.5 V (Na+/Na) at 0.1 C under room temperature. It is much higher than its theoretical value of 173 mAh g−1 and also than in the earlier reports (228 m Ah g−1). The full cell containing this material exhibits 800 mAh g−1 at 0.1 C and withstands until 1000 cycles with the discharge capacity of 164 mAh g−1. The surpassing capacity was expected by the anionic (oxygen) redox process, which elucidates the higher capacity based on the charge compensation phenomenon.
- Open Access
Eggshell-Membrane-Derived Carbon Coated on Li2FeSiO4 Cathode Material for Li-Ion Batteries
Lithium iron orthosilicate (LFS) cathode can be prepared via the polyol-assisted ball milling method with the incorporation of carbon derived from eggshell membrane (ESM) for improving inherent poor electronic conduction. The powder X-ray diffraction (XRD) pattern confirmed the diffraction peaks without any presence of further impure phase. Overall, 9 wt.% of carbon was loaded on the LFS, which was identified using thermogravimetric analysis. The nature of carbon was described using parameters such as monolayer, and average surface area was 53.5 and 24 m2 g−1 with the aid of Langmuir and Brunauer–Emmett–Teller (BET) surface area respectively. The binding energy was observed at 285.66 eV for C–N owing to the nitrogen content in eggshell membrane, which provides more charge carriers for conduction. Transmission electron microscopy (TEM) images clearly show the carbon coating on the LFS, the porous nature of carbon, and the atom arrangements. From the cyclic voltammetry (CV) curve, the ratio of the anodic to the cathodic peak current was calculated as 1.03, which reveals that the materials possess good reversibility. Due to the reversibility of the redox mechanism, the material exhibits discharge specific capacity of 194 mAh g−1 for the first cycle, with capacity retention and an average coulombic efficiency of 94.7% and 98.5% up to 50 cycles.
Open AccessEggshell-Membrane-Derived Carbon Coated on Li2FeSiO4 Cathode Material for Li-Ion Batteries
Lithium iron orthosilicate (LFS) cathode can be prepared via the polyol-assisted ball milling method with the incorporation of carbon derived from eggshell membrane (ESM) for improving inherent poor electronic conduction. The powder X-ray diffraction (XRD) pattern confirmed the diffraction peaks without any presence of further impure phase. Overall, 9 wt.% of carbon was loaded on the LFS, which was identified using thermogravimetric analysis. The nature of carbon was described using parameters such as monolayer, and average surface area was 53.5 and 24 m2 g−1 with the aid of Langmuir and Brunauer–Emmett–Teller (BET) surface area respectively. The binding energy was observed at 285.66 eV for C–N owing to the nitrogen content in eggshell membrane, which provides more charge carriers for conduction. Transmission electron microscopy (TEM) images clearly show the carbon coating on the LFS, the porous nature of carbon, and the atom arrangements. From the cyclic voltammetry (CV) curve, the ratio of the anodic to the cathodic peak current was calculated as 1.03, which reveals that the materials possess good reversibility. Due to the reversibility of the redox mechanism, the material exhibits discharge specific capacity of 194 mAh g−1 for the first cycle, with capacity retention and an average coulombic efficiency of 94.7% and 98.5% up to 50 cycles.
- Open Access
Superior Ionic Transferring Polymer with Silicon Dioxide Composite Membrane via Phase Inversion Method Designed for High Performance Sodium-Ion Battery
Superior sodium-ion-conducting polymer poly(vinyledene fluoride)–silicon dioxide (PVdF-SiO2) composite separator membrane was prepared via simple phase inversion method, which is a suitable alternative conventional polypropylene membrane. Basically, PVdF is the promising for use as high porous polymer electrolyte membrane due to its high dielectric constant (ε = 8.4). In this work, we prepared a composite membrane using PVdF-SiO2 via phase inversion method. This work was systematically studied towards the morphology, porosity, and electrochemical properties of as prepared membrane. The electrolyte uptake capability of separator membrane tested with 1 M NaPF6 electrolyte solution and temperature-dependent ionic conduction test were performed at various temperatures. This membrane exhibits higher ionic conductivity of 4.7 × 10−2 S cm−1 at room temperature. The physical properties were analyzed by X-ray diffraction, FT-IR, and FE-SEM micrographs analyses. The electrochemical performances with impedance analysis carried for prepared membrane with the as-prepared sodium P2-type cathode material. The material showed an initial discharge capacity of 178 mAh g−1 at 0.1 C between 2 and 4 V with 98% columbic efficiency and 81% capacity retention after 50 cycles upon using the as-prepared PVdF-SiO2 composite separator membrane.
Open AccessSuperior Ionic Transferring Polymer with Silicon Dioxide Composite Membrane via Phase Inversion Method Designed for High Performance Sodium-Ion Battery
Superior sodium-ion-conducting polymer poly(vinyledene fluoride)–silicon dioxide (PVdF-SiO2) composite separator membrane was prepared via simple phase inversion method, which is a suitable alternative conventional polypropylene membrane. Basically, PVdF is the promising for use as high porous polymer electrolyte membrane due to its high dielectric constant (ε = 8.4). In this work, we prepared a composite membrane using PVdF-SiO2 via phase inversion method. This work was systematically studied towards the morphology, porosity, and electrochemical properties of as prepared membrane. The electrolyte uptake capability of separator membrane tested with 1 M NaPF6 electrolyte solution and temperature-dependent ionic conduction test were performed at various temperatures. This membrane exhibits higher ionic conductivity of 4.7 × 10−2 S cm−1 at room temperature. The physical properties were analyzed by X-ray diffraction, FT-IR, and FE-SEM micrographs analyses. The electrochemical performances with impedance analysis carried for prepared membrane with the as-prepared sodium P2-type cathode material. The material showed an initial discharge capacity of 178 mAh g−1 at 0.1 C between 2 and 4 V with 98% columbic efficiency and 81% capacity retention after 50 cycles upon using the as-prepared PVdF-SiO2 composite separator membrane.
- Open Access
Carbon Loaded Nano-Designed Spherically High Symmetric Lithium Iron Orthosilicate Cathode Materials for Lithium Secondary Batteries
In the present study, Li2FeSiO4 (LFS) cathode material has been prepared via a modified polyol method. The stabilizing nature of polyol solvent was greatly influenced to reduce the particle size (~50 nm) and for coating the carbon on the surface of the as-mentioned materials (~10 nm). As-prepared nano-sized Li2FeSiO4 material deliver initial discharge capacity of 186 mAh·g−1 at 1C with the coulombic efficiency of 99% and sustain up to 100 cycles with only 7 mAh·g−1 is the difference of discharge capacity from its 1st cycle to 100th cycle. The rate performance illustrates the discharge capacity 280 mAh·g−1 for lower C-rate (C/20) and 95 mAh·g−1 for higher C-rate (2C).
Open AccessCarbon Loaded Nano-Designed Spherically High Symmetric Lithium Iron Orthosilicate Cathode Materials for Lithium Secondary Batteries
In the present study, Li2FeSiO4 (LFS) cathode material has been prepared via a modified polyol method. The stabilizing nature of polyol solvent was greatly influenced to reduce the particle size (~50 nm) and for coating the carbon on the surface of the as-mentioned materials (~10 nm). As-prepared nano-sized Li2FeSiO4 material deliver initial discharge capacity of 186 mAh·g−1 at 1C with the coulombic efficiency of 99% and sustain up to 100 cycles with only 7 mAh·g−1 is the difference of discharge capacity from its 1st cycle to 100th cycle. The rate performance illustrates the discharge capacity 280 mAh·g−1 for lower C-rate (C/20) and 95 mAh·g−1 for higher C-rate (2C).