MKMerve Tuna Kayılı

Merve Tuna Kayılı

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Merve Tuna Kayılı has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Integrated life cycle assessment of passive house envelope alternatives in a hot-arid climate: The case of the Gaziantep ecological house

    by Feride Çiğdem Kara Dülger, Merve Tuna Kayılı

    The growing demand for energy-efficient buildings has led to the widespread adoption of Passive House (PH) standards, emphasizing operational energy reduction through optimized insulation and airtight construction. However, the embodied environmental impacts of building materials remain a critical concern. This study presents a Life Cycle Assessment of the Gaziantep Ecological House, Turkey’s first PH-certified building, focusing on both operational and embodied carbon emissions across its construction phases. The study evaluates the A1-A3 (material extraction, processing, and manufacturing) and A4 (transportation) stages, incorporating various wall construction scenarios to assess their environmental trade-offs. The results reveal that while high-performance insulation materials contribute to energy efficiency, their embodied carbon emissions can significantly impact sustainability. Among alternative wall materials, brick-based scenarios exhibited the highest global warming, acidification, and eutrophication potentials due to high-temperature kiln-firing and fossil fuel dependency. Conversely, adobe (earthen) walls demonstrated the lowest environmental impact across multiple categories, reinforcing their viability as a low-carbon construction material. However, challenges related to moisture resistance and structural performance require further investigation. Additionally, hempcrete, often perceived as an environmentally friendly material, showed higher-than-expected ozone depletion potential due to its cementitious binder content, highlighting the trade-offs between carbon sequestration benefits and secondary environmental burdens. The study also underscores the critical role of transportation emissions (A4 phase), where locally sourced materials such as adobe and autoclaved aerated concrete significantly reduced transport-related carbon emissions compared to imported alternatives. Overall, this research emphasizes the need for a balanced approach to sustainable construction, integrating both operational energy efficiency and embodied carbon reduction. Future studies should explore hybrid material strategies, bio-based insulation alternatives, and circular economy principles to further minimize lifecycle environmental impacts. By integrating LCA-driven decision-making into early-stage building design, policymakers, architects, and engineers can optimize passive house construction for long-term environmental sustainability.

  • Data driven eco efficiency in MDF manufacturing using lignin based resin and waste utilization: Explainable ML for optimization of global warming potential and primary energy demand

    by Caner Yetis, Merve Tuna Kayılı

    Medium density fiberboard (MDF) production creates environmental burdens mainly through resin consumption, energy intensive pressing, and material losses. This study developed a Grey Wolf Optimizer (GWO) enhanced machine learning framework to predict global warming potential (GWP) and primary energy demand (PED) using directly controllable MDF process variables. Resin ratio, waste ratio, press temperature, press pressure, and press time were used as inputs, while GWP and PED were defined as outputs. A dataset of 60 production scenarios was used to train four GWO optimized models: CatBoost, Gradient Boosting Machine, Random Forest, and Extra Trees Regressor. Model performance was evaluated using R, R², RMSE, RMSRE, RRMSE, MAE, and MAPE. GWO CatBoost achieved the best GWP prediction performance with test values of R² = 0.9467, RMSE = 10.81, MAE = 8.31, and MAPE = 1.46%, while GWO GBM provided the highest PED accuracy with R² = 0.9214, RMSE = 173.92, MAE = 153.23, and MAPE = 2.22%. SHapley Additive exPlanations (SHAP) analysis identified resin ratio as the dominant predictor for both outputs, followed by press time and press temperature, while waste ratio and press pressure had smaller but meaningful effects. Individual Conditional Expectation (ICE) results showed that higher resin content and more energy intensive pressing conditions generally increased GWP and PED. Overall, the proposed framework provides a rapid and explainable decision support tool for environmentally informed MDF process optimization.

  • Mitigating fit-out waste in rentable offices: The role of flexible design strategies

    by Ebru Kılıç Bakırhan, Merve Tuna Kayılı

    Fit-out waste generated during building refurbishments has significant environmental consequences, accounting for substantial portions of construction and demolition waste. Over a 50-year lifespan, the total waste generated by a rentable office was found to be approximately four times higher than that of a standard office, while implementing openplan layouts and movable partitions reduced embodied energy by up to 61.3% and embodied energy loss by 84.3%, respectively.This study investigates the effectiveness of flexible interior strategies—open-plan layouts and movable partition systems—in mitigating the environmental impacts associated with fit-out waste in rentable offices. The analysis, structured around three hypotheses and four office typologies, covers the production, replacement, and refurbishment stages of the building life cycle and evaluates total waste, life cycle embodied energy (LCEE), and embodied carbon (EC).The findings highlight that flexibility-oriented design strategies can significantly reduce material turnover and resource inefficiency in the building sector. However, strategies such as recycling, reuse, and the economic aspects of the interventions are excluded from the scope of this study.

  • Evaluating the potential of passive design measures for energy efficiency in retrofitting an educational building towards net-zero energy goals

    by Merve Tuna Kayılı, Bahar Sultan Qurraie

    Achieving Net-Zero Energy Building (NZEB) performance requires a comprehensive approach that integrates both passive and active energy strategies. This study investigates the standalone impact of various passive design measures on reducing heating and lighting energy demands in an existing educational facility located in Safranbolu, Türkiye, a region characterized by a continental climate with mild summers and cold winters. Utilizing dynamic energy simulations conducted via DesignBuilder and the EnergyPlus engine, the research evaluates a range of envelope retrofit strategies, including optimized window-to-wall ratios (WWR), high-performance glazing systems, double-skin façades (DSFs), and advanced insulation materials. The results indicate that while passive envelope enhancements can significantly improve thermal performance, the most effective configuration identified in this case study, combining a cavity wall with aerogel insulation and triple-pane argon-filled low-emissivity glazing, achieved a 34.9% reduction in heating demand under the specific conditions of the building and climate analyzed. While passive strategies effectively reduce energy losses, they are insufficient on their own to eliminate dependence on external energy sources. To overcome this limitation, the integration of active renewable energy systems, such as photovoltaic (PV) panels and solar thermal collectors, is essential. Furthermore, incorporating energy storage technologies and smart energy management systems can enhance system reliability and efficiency. This study underscores that a hybrid approach, combining passive design with active solar technologies, offers the most viable path to NZEB achievement. Notably, the research provides an original and detailed multi-scenario evaluation of passive-only retrofit strategies, quantifying their individual and combined potential prior to the introduction of active energy systems.

  • Open Access

    The Effects of Waste‐Based and Thermal Energy‐Storing Building Materials on Sustainable Architecture: A Review

    by Ebru Kılıç Bakırhan, Merve Tuna Kayılı

    The utilization of waste‐based thermal energy‐storing building materials in construction is a significant advancement in the reduction of the environmental impact of human activities. Such materials provide thermal comfort, reduce energy consumption, and promote the use of renewable resources. Phase change materials (PCM) have been the subject of these achievements in recent years regarding their heat storage potentials. On the other hand, the utilization of waste is of significant consequence with regard to the sustenance of a circular economy and the alleviation of waste‐related environmental concerns. However, the majority of studies on PCM in the literature tend to concentrate on the thermal, physical, chemical, and mechanical properties of the materials, and thus fails to provide a comprehensive perspective on the sustainability of these materials. In this study, 11 articles selected from a total of 178 studies aiming to produce building materials with waste‐PCM combinations are analyzed according to five categories related to sustainable built environment, which are resource use, environmental impact, health, comfort, and cost. As a result, it is proved that composite building materials that contain waste and store thermal energy have the potential to contribute significantly to sustainable architecture.


  • Open Access

    Improving Indoor Air Quality with Natural Ventilation Methods: A Simulation Study

    by Caner Yetiş, Merve Tuna Kayılı

    In modern life, strategies developed in line with the increasing energy demand cause many environmental problems on a global scale. One of the most important of these problems is inadequate indoor air quality. The most critical parameters affecting indoor air quality during the design phase are selecting wrong and unhealthy building products, insufficient window sizes, and unplanned natural ventilation. This study investigates whether indoor air quality can be improved only by effective natural ventilation methods, without compromising thermal comfort, through small changes that can be applied to buildings. For this purpose, simulation studies were carried out to reveal whether indoor air quality could be improved without compromising thermal comfort in a library building. As a result, when evaluating the improvement recommendations, the thermal comfort range for the cross-ventilation and chimney effect ventilation recommendations is 'comfortable' in winter and 'comfortable-partially comfortable' in summer. For the ventilation recommendations with roof wings, skylights and wind towers, the thermal comfort range for summer and winter remained in the "comfortable" range due to the high natural ventilation performance.


  • Open Access

    Investigation of proper material selection for rainwater harvesting in squares having higher urban heat island effect potential: KBU Social Life Center example

    by Sibel Temi̇zKan, Merve Tuna Kayili

    With the revolution in industrialization, the gas amount emitted into the atmosphere grew, causing global warming and climate change. This developing shift has a detrimental impact on natural resources and hastens their decline. Water is one of the natural resources that has been impacted. Water scarcity is becoming a problem due to causes known to be urbanization, population increase and climate change. With regards to sustainable architecture, rainwater collection from buildings for its efficient use, application of simple water treatment processes and its reuse are considered to be among the precautions that may be taken in order to save water. In addition to playing a role in reducing water resources, urbanization has another detrimental characteristic, such as creating heat islands with highly impermeable surfaces. Top cover designs that promote green spaces and minimize heat island impacts are the most effective way for minimizing the detrimental effects that heat islands have on outdoor thermal comfort in urban settings. Therefore, a top cover was proposed in this study for mitigating the effect of heat island observed in KBU Social Life Center square that may be characterized as a vast heat island within the campus, as well as to bring it in feature of collecting rainwater in its immense area. Materials to be used in the proposed top cover as well as the factors affecting the selection of material were determined in terms of efficiency in rainwater collection and the mitigation of urban heat island effect. A considerably optimum material that can be used in the cover was determined by one of the multi-criteria decision-making methods known to be PROMETHEE method. As a consequence of its pricing, roof efficiency, and albedo coefficient qualities, the polycarbonate panel material has been chosen as the most acceptable material to be used for the suggested top cover.


  • Yapılarda Atık Yönetimi: Bir Eğitim Yapısı Üzerinden Geri Dönüşüm Önerileri ve Karbon Salımının Engellenmesi

    by Feride Çiğdem Kara, Merve Tuna Kayili

    Enerji ve kaynak kullanımında büyük miktarda payı olan yapılara yaşam döngüsü boyunca yüksek hızda kaynak girdisi sağlanmakta ve hizmet ömrünün dolduğu yıkım sonrası evrede ise yapı bileşenlerinin geri kazanılmasına yönelik atık yönetimi etkin bir şekilde planlanmadığında enerji ve kaynak girdisi, ekolojik ve ekonomik kayıplara neden olmaktadır. Özellikle günümüzde kentsel dönüşüme uğrayan yapıların artması bu sorunu daha da öne çıkarmaktadır. Bu bağlamda, yapıya giren enerji ve kaynakların korunması ve geri dönüşümüne yönelik, Karabük’te yıkımı gerçekleştirilen bir eğitim yapısı üzerinden atık yönetiminin incelendiği çalışmada, yapılan literatür taraması sonucunda atık sahalarına gönderilen büyük miktardaki tuğla ve seramik atıklarının geri dönüşümüne yönelik öneriler belirlenmiştir. Sunulan bu geri dönüşüm önerileri sonucunda doğaya salımı engellenebilecek gömülü karbon miktarı tespit edilmiştir. Tuğla için 220 ton 601 kgCO2 eq, seramik için ise 8 ton 41 kg CO2 eq’nin doğaya salımının engellenebileceği tespit edilen yıkıntı atıklarının öneriler dahilinde sektöre kazandırılmasının, enerji ve kaynak korunumu açısından önemi belirtilmiştir.