Lixin Jiang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lixin Jiang has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
Jiafu Wang
Shaanxi Key Laboratory of Artificially-Structured Functional Materials and Devices
12 shared publicationsShaobo Qu
11 shared publicationsLin Zheng
Shaanxi Key Laboratory of Artificially-Structured Functional Materials and Devices
10 shared publicationsYongfeng Li
Shaanxi Key Laboratory of Artificially-Structured Functional Materials and Devices
8 shared publicationsHongya Chen
Shaanxi Key Laboratory of Artificially-Structured Functional Materials and Devices
7 shared publicationsWenjie Wang
Shaanxi Key Laboratory of Artificially-Structured Functional Materials and Devices
6 shared publications
Latest Publications
- 16 June 2026
- Published by Optica Publishing Group in Photonics Research
- Vol. 14 (7) , 2900
Dynamic on-demand linear polarization rotation with high transmission efficiency via linear and nonlinear modulation
Dynamic control of electromagnetic (EM) wave polarization is of great importance for extensive applications, including wireless communication, radar imaging, and optical information processing. However, most existing reconfigurable metasurfaces, particularly in the transmission-type, suffer from limited transmission efficiency, restricted functional flexibility, and narrow operational bandwidth. Here, we propose and experimentally demonstrate a high-efficiency, broadband, and dynamically reconfigurable transmissive metasurface for on-demand linear polarization rotation. The meta-unit, integrated with PIN diodes, is dynamically controlled by a field-programmable gate array (FPGA), enabling operation in two distinct programmable modes. In the linear time-invariant mode, discrete switching of the polarization rotation angle is achieved by digitally toggling the transmission of co- and cross-polarized components. In the nonlinear time-varying mode, continuous and dynamic control over the linear polarization angle is realized by employing precisely designed time-coding sequences to tailor the amplitude ratio between orthogonal polarizations. Experimental results demonstrate that the fabricated metasurface prototype exhibits excellent performance, featuring high transmission amplitude exceeding 0.9 and dynamic polarization rotation in the frequency band of 3.7–5.3 GHz. Our work establishes a promising transmissive platform for dynamic and tailorable polarization control, paving the way for advanced applications such as high-speed polarization-division multiplexing, polarization imaging, and next-generation wireless communications.
- 16 June 2026
- Published by Optica Publishing Group in Photonics Research
- Vol. 14 (7) , 2900
Dynamic on-demand linear polarization rotation with high transmission efficiency via linear and nonlinear modulation
Dynamic control of electromagnetic (EM) wave polarization is of great importance for extensive applications, including wireless communication, radar imaging, and optical information processing. However, most existing reconfigurable metasurfaces, particularly in the transmission-type, suffer from limited transmission efficiency, restricted functional flexibility, and narrow operational bandwidth. Here, we propose and experimentally demonstrate a high-efficiency, broadband, and dynamically reconfigurable transmissive metasurface for on-demand linear polarization rotation. The meta-unit, integrated with PIN diodes, is dynamically controlled by a field-programmable gate array (FPGA), enabling operation in two distinct programmable modes. In the linear time-invariant mode, discrete switching of the polarization rotation angle is achieved by digitally toggling the transmission of co- and cross-polarized components. In the nonlinear time-varying mode, continuous and dynamic control over the linear polarization angle is realized by employing precisely designed time-coding sequences to tailor the amplitude ratio between orthogonal polarizations. Experimental results demonstrate that the fabricated metasurface prototype exhibits excellent performance, featuring high transmission amplitude exceeding 0.9 and dynamic polarization rotation in the frequency band of 3.7–5.3 GHz. Our work establishes a promising transmissive platform for dynamic and tailorable polarization control, paving the way for advanced applications such as high-speed polarization-division multiplexing, polarization imaging, and next-generation wireless communications.
- 15 January 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (2) , 1970-1986
Reconfigurable chiral metasurface for tailoring circular dichroism to realize switchable circularly polarized OAM multi-modal/selective generation and absorption
Metasurfaces or artificial electromagnetic structures offer viable solutions for electromagnetic (EM) wave manipulation with their compact periodic configurations. Tunable metasurfaces capable of controlling wavefronts are highly desirable in numerous engineering and scientific applications. This paper presents the design and implementation of a reconfigurable electromagnetic metasurface based on circular dichroism (CD), which integrates PIN diodes to achieve dynamic manipulation of circularly polarized (CP) waves and enables vortex beam generation under corresponding states. The metasurface consists of a 30 × 30 array of meta-atoms, each independently controllable. By switching the diode states, each meta-atom switch between functioning as a high-efficiency reflector, high-efficiency absorber, left-handed circular polarization (LHCP) metamirror, and right-handed circular polarization (RHCP) metamirror. Leveraging the Pancharatnam-Berry (PB) phase principle, chiral mirror elements are arranged in arrays to generate vortex beams. Through simulations and experimental verification, the metasurface achieves multi-modal generation by simultaneously generating vortex beams with topological charges l = + 1 and l = −1, enables selective generation of orbital angular momentum (OAM) modes to produce vortex beams carrying either l = + 1 or l = −1 topological charge, and demonstrates efficient absorption of CP beams under specific operational conditions. The device demonstrates superior performance in the 8.5–13.5 GHz frequency range, providing innovative technical approaches for optics, communications, quantum technologies, biomedicine, and other fields. It is expected to enhance information transmission efficiency, strengthen optical manipulation capabilities, and drive the realization of more cutting-edge applications.
- 15 January 2026
- Published by Optica Publishing Group in Optics Express
- Vol. 34 (2) , 1970-1986
Reconfigurable chiral metasurface for tailoring circular dichroism to realize switchable circularly polarized OAM multi-modal/selective generation and absorption
Metasurfaces or artificial electromagnetic structures offer viable solutions for electromagnetic (EM) wave manipulation with their compact periodic configurations. Tunable metasurfaces capable of controlling wavefronts are highly desirable in numerous engineering and scientific applications. This paper presents the design and implementation of a reconfigurable electromagnetic metasurface based on circular dichroism (CD), which integrates PIN diodes to achieve dynamic manipulation of circularly polarized (CP) waves and enables vortex beam generation under corresponding states. The metasurface consists of a 30 × 30 array of meta-atoms, each independently controllable. By switching the diode states, each meta-atom switch between functioning as a high-efficiency reflector, high-efficiency absorber, left-handed circular polarization (LHCP) metamirror, and right-handed circular polarization (RHCP) metamirror. Leveraging the Pancharatnam-Berry (PB) phase principle, chiral mirror elements are arranged in arrays to generate vortex beams. Through simulations and experimental verification, the metasurface achieves multi-modal generation by simultaneously generating vortex beams with topological charges l = + 1 and l = −1, enables selective generation of orbital angular momentum (OAM) modes to produce vortex beams carrying either l = + 1 or l = −1 topological charge, and demonstrates efficient absorption of CP beams under specific operational conditions. The device demonstrates superior performance in the 8.5–13.5 GHz frequency range, providing innovative technical approaches for optics, communications, quantum technologies, biomedicine, and other fields. It is expected to enhance information transmission efficiency, strengthen optical manipulation capabilities, and drive the realization of more cutting-edge applications.
- 19 June 2025
- Published by Optica Publishing Group in Photonics Research
- Vol. 13 (7) , 1821
Radiation-type space-time metasurface for arbitrary beamforming by simultaneous and independent modulation of amplitude and phase for orthogonal polarization
Programmable metasurfaces are revolutionizing the field of communication and perception by dynamically modulating properties such as amplitude and phase of electromagnetic (EM) waves. Nevertheless, it is challenging for existing programmable metasurfaces to attain fully independent dynamic modulation of amplitude and phase due to the significant correlation between these two parameters. In this paper, we propose a radiation-type metasurface that can realize radiation space-time coding of the joint amplitude-phase. Hence, independent and arbitrary modulation of amplitudes and phases can be achieved for both x-polarized and y-polarized EM waves. For demonstration, the dynamic beam scanning with ultra-low sidelobe levels (SLLs) is validated. Moreover, we propose a strategy of stochastic coding and non-uniform modulation to suppress the harmonic energy, thereby obtaining the ultra-low sideband levels (SBLs). Prototypes were fabricated and measured, and all simulations and measurements demonstrated the superiority of the proposed strategy. In addition, the proposed strategy is optimization-free and highly integrated, which has unrivaled potential in the field of compact communication systems and radar systems.
- 19 June 2025
- Published by Optica Publishing Group in Photonics Research
- Vol. 13 (7) , 1821
Radiation-type space-time metasurface for arbitrary beamforming by simultaneous and independent modulation of amplitude and phase for orthogonal polarization
Programmable metasurfaces are revolutionizing the field of communication and perception by dynamically modulating properties such as amplitude and phase of electromagnetic (EM) waves. Nevertheless, it is challenging for existing programmable metasurfaces to attain fully independent dynamic modulation of amplitude and phase due to the significant correlation between these two parameters. In this paper, we propose a radiation-type metasurface that can realize radiation space-time coding of the joint amplitude-phase. Hence, independent and arbitrary modulation of amplitudes and phases can be achieved for both x-polarized and y-polarized EM waves. For demonstration, the dynamic beam scanning with ultra-low sidelobe levels (SLLs) is validated. Moreover, we propose a strategy of stochastic coding and non-uniform modulation to suppress the harmonic energy, thereby obtaining the ultra-low sideband levels (SBLs). Prototypes were fabricated and measured, and all simulations and measurements demonstrated the superiority of the proposed strategy. In addition, the proposed strategy is optimization-free and highly integrated, which has unrivaled potential in the field of compact communication systems and radar systems.
- Open Access
- 29 January 2025
- Published by Wiley in Advanced Science
- Vol. 12 (11) , e2413429
Beam Scanning with Ultra‐Low Sidelobes and In‐Band Ultra‐Low Scattering Characteristics Empowered by Single Space‐Time‐Coding Radiation‐Scattering Metasurface
The integrated modulation of radiation and scattering provides an unprecedented opportunity to reduce the number of electromagnetic (EM) apertures in the platform while simultaneously enhancing communication and stealth performance. Nevertheless, achieving full‐polarization, arbitrary amplitude, and phase modulation of radiation scattering remains a challenge. In this paper, a strategy that realizes space‐time coding of radiation scattering within the same frequency band, which enables the simultaneous and independent modulation of amplitude and phase, is proposed. To address the limitations of the high sideband levels (SBLs) of conventional space‐time‐coding metasurfaces, a strategy comprising nonuniform modulation periods and stochastic coding is proposed. Consequently, beam scanning with ultra‐low sidelobe levels (SLLs) and suppressed SBLs is achieved in the radiation mode (RM). In scattering mode (SM), in‐band low scattering characteristics are achieved within the same operating frequency band as RM. A prototype of a space‐time‐coding radiation‐scattering metasurface (STCRSM) is fabricated and the aforementioned functionalities are validated by measurements. Furthermore, the proposed strategy does not necessitate the utilization of optimization algorithms and exhibits low SLLs and low SBLs, which will make it flourish in RF stealth applications, such as covert communication systems.
- 29 January 2025
- Published by Wiley in Advanced Science
- Vol. 12 (11) , e2413429
Open AccessBeam Scanning with Ultra‐Low Sidelobes and In‐Band Ultra‐Low Scattering Characteristics Empowered by Single Space‐Time‐Coding Radiation‐Scattering Metasurface
The integrated modulation of radiation and scattering provides an unprecedented opportunity to reduce the number of electromagnetic (EM) apertures in the platform while simultaneously enhancing communication and stealth performance. Nevertheless, achieving full‐polarization, arbitrary amplitude, and phase modulation of radiation scattering remains a challenge. In this paper, a strategy that realizes space‐time coding of radiation scattering within the same frequency band, which enables the simultaneous and independent modulation of amplitude and phase, is proposed. To address the limitations of the high sideband levels (SBLs) of conventional space‐time‐coding metasurfaces, a strategy comprising nonuniform modulation periods and stochastic coding is proposed. Consequently, beam scanning with ultra‐low sidelobe levels (SLLs) and suppressed SBLs is achieved in the radiation mode (RM). In scattering mode (SM), in‐band low scattering characteristics are achieved within the same operating frequency band as RM. A prototype of a space‐time‐coding radiation‐scattering metasurface (STCRSM) is fabricated and the aforementioned functionalities are validated by measurements. Furthermore, the proposed strategy does not necessitate the utilization of optimization algorithms and exhibits low SLLs and low SBLs, which will make it flourish in RF stealth applications, such as covert communication systems.
- 21 October 2024
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 14 (11) , 2600-2611
Origami multifunctional metagrating for a mechanically controlled electromagnetic wavefront
Metasurface or artificial electromagnetic (EM) structures offer viable options for manipulating EM waves with compact periodic structures. Tunable metasurfaces are ideal for many engineering and scientific applications because they can manipulate EM wavefronts. However, it is challenging to implement tunable metasurfaces that can achieve multiple functions for integration. In addition, integrated multifunctional metasurfaces are often structurally complicated and bulky. This paper proposes a simple spatial modulation mechanism that uses Miura origami reconfigurable one-dimensional metagrating to achieve multiple control of EM wavefront. Theoretical predictions, numerical simulations, and experiments confirm and validate the basic concepts. In particular, the continuous geometric deformation of the Miura-ori lattice is a promising method for compensating the dispersion of characters in gradient metasurfaces. Considering origami structures’ outstanding mechanical properties and strong deformation abilities, this discovery opens up another avenue for lightweight and deployable meta-devices.
- 21 October 2024
- Published by Optica Publishing Group in Optical Materials Express
- Vol. 14 (11) , 2600-2611
Origami multifunctional metagrating for a mechanically controlled electromagnetic wavefront
Metasurface or artificial electromagnetic (EM) structures offer viable options for manipulating EM waves with compact periodic structures. Tunable metasurfaces are ideal for many engineering and scientific applications because they can manipulate EM wavefronts. However, it is challenging to implement tunable metasurfaces that can achieve multiple functions for integration. In addition, integrated multifunctional metasurfaces are often structurally complicated and bulky. This paper proposes a simple spatial modulation mechanism that uses Miura origami reconfigurable one-dimensional metagrating to achieve multiple control of EM wavefront. Theoretical predictions, numerical simulations, and experiments confirm and validate the basic concepts. In particular, the continuous geometric deformation of the Miura-ori lattice is a promising method for compensating the dispersion of characters in gradient metasurfaces. Considering origami structures’ outstanding mechanical properties and strong deformation abilities, this discovery opens up another avenue for lightweight and deployable meta-devices.
- 12 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (2) , 703-713
Smart Jamming Cloak for Moving Targets With Full Polarization Response
Jamming enemy detectors’ capture of one’s own targets has been a long-standing research topic. Invisibility cloaks have long been revered as a form of camouflage. However, these strategies will inevitably disclose crucial information about the target’s speed and distance when challenged by dynamic surroundings, while also posing fresh obstacles for tracking and identification on one’s own detectors. In this article, we proposed a smart jamming cloak (SJC) comprising a space–time-modulated metasurface and an intelligent control system with expansion circuits and an incident direction sensor. By rotating the surface current, we dynamically modulate the multibit Pancharatnam–Berry (PB) phase, endowing the SJC with wideband and dispersion-free superiorities. Experiments demonstrate that the SJC can adaptively perform space–time modulation once perceiving the incident direction, leading the enemy detector to obtain erroneous distance and speed information about the target. However, such modulation is known to own detectors, and the correct information can be obtained by inverse transformation. Hence, the enemy detectors suffer confusion by SJC without human intervention while simultaneously facilitating own detectors. Furthermore, its exceptional ability to handle incident waves with large incident angles and arbitrary polarization renders it promising in areas, such as communication and intelligent identification.
- 12 July 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Microwave Theory and Techniques
- Vol. 73 (2) , 703-713
Smart Jamming Cloak for Moving Targets With Full Polarization Response
Jamming enemy detectors’ capture of one’s own targets has been a long-standing research topic. Invisibility cloaks have long been revered as a form of camouflage. However, these strategies will inevitably disclose crucial information about the target’s speed and distance when challenged by dynamic surroundings, while also posing fresh obstacles for tracking and identification on one’s own detectors. In this article, we proposed a smart jamming cloak (SJC) comprising a space–time-modulated metasurface and an intelligent control system with expansion circuits and an incident direction sensor. By rotating the surface current, we dynamically modulate the multibit Pancharatnam–Berry (PB) phase, endowing the SJC with wideband and dispersion-free superiorities. Experiments demonstrate that the SJC can adaptively perform space–time modulation once perceiving the incident direction, leading the enemy detector to obtain erroneous distance and speed information about the target. However, such modulation is known to own detectors, and the correct information can be obtained by inverse transformation. Hence, the enemy detectors suffer confusion by SJC without human intervention while simultaneously facilitating own detectors. Furthermore, its exceptional ability to handle incident waves with large incident angles and arbitrary polarization renders it promising in areas, such as communication and intelligent identification.
- 17 June 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (14) , 24091-24106
Miura-ori based reconfigurable multilayer absorber for high-efficiency wide-angle absorption
Radar stealth structures that can achieve high-efficiency wide-angle absorption are key components of future military equipment. However, it is difficult for both planar and three-dimensional (3D) absorbers to achieve efficient absorption in a large incidence angle range. The multilayer reconfigurable absorber component based on Miura origami provides a unique solution. First, the multilayer origami absorber is parameterized in the simulation software. Each origami structure is covered with resistive films that fit the panels. Geometric constraints are satisfied among the multilayer structures. They support reconfigurability in the range of continuous states (as opposed to discrete states), which is conducive to finding the folded state with a more efficient absorption rate within the frequency band. Secondly, the designed structure does not require a specialized mechanically supported multilayer origami absorber. In addition, the equivalent analogue circuit method is used to analyze the efficient absorption of multilayer origami under oblique incidence. Finally, our proposed absorber satisfies the requirements of multiple absorption metrics: broadband, high efficiency, wide incidence angle, and polarization insensitivity. As the validation, we simulated and fabricated a double-layer origami absorber. Our proposed origami absorber can maintain an absorption rate of more than 90% for both transverse electric (TE) and transverse magnetic (TM) polarizations in the operating frequency band (5-20 GHz) over a wide range of incidence angles (0°-70°). When the incidence angle qinc = 40°, the double-layer origami absorber (q1 = 90°, α1 = 60°, and a2 = 75°) can achieve at least 10 dB reflection reduction of -18 dB and -20 dB in TE and TM modes, respectively. The proposed origami absorber provides a reference for the design of other absorbers.
- 17 June 2024
- Published by Optica Publishing Group in Optics Express
- Vol. 32 (14) , 24091-24106
Miura-ori based reconfigurable multilayer absorber for high-efficiency wide-angle absorption
Radar stealth structures that can achieve high-efficiency wide-angle absorption are key components of future military equipment. However, it is difficult for both planar and three-dimensional (3D) absorbers to achieve efficient absorption in a large incidence angle range. The multilayer reconfigurable absorber component based on Miura origami provides a unique solution. First, the multilayer origami absorber is parameterized in the simulation software. Each origami structure is covered with resistive films that fit the panels. Geometric constraints are satisfied among the multilayer structures. They support reconfigurability in the range of continuous states (as opposed to discrete states), which is conducive to finding the folded state with a more efficient absorption rate within the frequency band. Secondly, the designed structure does not require a specialized mechanically supported multilayer origami absorber. In addition, the equivalent analogue circuit method is used to analyze the efficient absorption of multilayer origami under oblique incidence. Finally, our proposed absorber satisfies the requirements of multiple absorption metrics: broadband, high efficiency, wide incidence angle, and polarization insensitivity. As the validation, we simulated and fabricated a double-layer origami absorber. Our proposed origami absorber can maintain an absorption rate of more than 90% for both transverse electric (TE) and transverse magnetic (TM) polarizations in the operating frequency band (5-20 GHz) over a wide range of incidence angles (0°-70°). When the incidence angle qinc = 40°, the double-layer origami absorber (q1 = 90°, α1 = 60°, and a2 = 75°) can achieve at least 10 dB reflection reduction of -18 dB and -20 dB in TE and TM modes, respectively. The proposed origami absorber provides a reference for the design of other absorbers.
- 1 March 2024
- Published by Optica Publishing Group in Photonics Research
- Vol. 12 (3) , 581-586
Miura origami based reconfigurable polarization converter for multifunctional control of electromagnetic waves
Polarization is one of the basic characteristics of electromagnetic (EM) waves, and its flexible control is very important in many practical applications. At present, most of the multifunction polarization metasurfaces are electrically tunable based on PIN and varactor diodes, which are easy to operate and have strong real-time performance. However, there are still some problems in them, such as few degrees of freedom of planar structure control, complex circuit, bulky sample, and high cost. In view of these shortcomings, this paper proposes a Miura origami based reconfigurable polarization conversion metasurface for multifunctional control of EM waves. The interaction between the electric dipoles is changed by adjusting the folding angle θ, thereby tuning the operating frequency of the polarization conversion and the polarization state of the reflected wave. This mechanical control method brings more degrees of freedom to manipulate EM waves. And the processed sample is with lightweight and low cost. To verify the performance of the proposed origami polarization converter, a Miura origami structure loaded with metal split rings is designed and fabricated. The operating frequency of the structure can be tuned in different folding states. In addition, by controlling the folding angle θ, linear-to-linear and linear-to-circular polarization converters can be realized at different folding states. The proposed Miura origami polarization conversion metasurface provides a new idea for reconfigurable linear polarization conversion and multifunctional devices.
- 1 March 2024
- Published by Optica Publishing Group in Photonics Research
- Vol. 12 (3) , 581-586
Miura origami based reconfigurable polarization converter for multifunctional control of electromagnetic waves
Polarization is one of the basic characteristics of electromagnetic (EM) waves, and its flexible control is very important in many practical applications. At present, most of the multifunction polarization metasurfaces are electrically tunable based on PIN and varactor diodes, which are easy to operate and have strong real-time performance. However, there are still some problems in them, such as few degrees of freedom of planar structure control, complex circuit, bulky sample, and high cost. In view of these shortcomings, this paper proposes a Miura origami based reconfigurable polarization conversion metasurface for multifunctional control of EM waves. The interaction between the electric dipoles is changed by adjusting the folding angle θ, thereby tuning the operating frequency of the polarization conversion and the polarization state of the reflected wave. This mechanical control method brings more degrees of freedom to manipulate EM waves. And the processed sample is with lightweight and low cost. To verify the performance of the proposed origami polarization converter, a Miura origami structure loaded with metal split rings is designed and fabricated. The operating frequency of the structure can be tuned in different folding states. In addition, by controlling the folding angle θ, linear-to-linear and linear-to-circular polarization converters can be realized at different folding states. The proposed Miura origami polarization conversion metasurface provides a new idea for reconfigurable linear polarization conversion and multifunctional devices.
- Open Access
- 9 February 2024
- Published by Wiley in Nanophotonics
- Vol. 13 (4) , 499-508
Full‐polarization‐locked vortex beam generator with time‐varying characteristics
Vortex beams carrying orbital angular momentum (OAM) are considered to hold significant prospects in fields such as super‐resolution imaging, high‐capacity communications, and quantum optics. Therefore, the techniques of vortex beam generation have attracted extensive studies, in which the development of metasurfaces brings new vigor and vitality to it. However, the generation of reconfigurable vortex beams by metasurfaces at the incidence of arbitrary polarized electromagnetic (EM) waves holds challenges. In this study, an efficient and reconfigurable strategy utilizing PB phase‐modulated circularly polarized waves and dynamic phase‐modulated linearly polarized waves is proposed, enabling a polarization‐locked fully polarization vortex beams generator. Based on this strategy, we designed and fabricated a prototype of the vortex beam generator for full polarization, which verifies the rotating Doppler effect and generates a time‐varying vortex beam. All the results have been verified by simulation and measurements. In addition, the proposed strategy can be easily extended to other frequency regions and holds potential in areas such as information encryption, biosensing, and OAM multiplexing communication.
- 9 February 2024
- Published by Wiley in Nanophotonics
- Vol. 13 (4) , 499-508
Open AccessFull‐polarization‐locked vortex beam generator with time‐varying characteristics
Vortex beams carrying orbital angular momentum (OAM) are considered to hold significant prospects in fields such as super‐resolution imaging, high‐capacity communications, and quantum optics. Therefore, the techniques of vortex beam generation have attracted extensive studies, in which the development of metasurfaces brings new vigor and vitality to it. However, the generation of reconfigurable vortex beams by metasurfaces at the incidence of arbitrary polarized electromagnetic (EM) waves holds challenges. In this study, an efficient and reconfigurable strategy utilizing PB phase‐modulated circularly polarized waves and dynamic phase‐modulated linearly polarized waves is proposed, enabling a polarization‐locked fully polarization vortex beams generator. Based on this strategy, we designed and fabricated a prototype of the vortex beam generator for full polarization, which verifies the rotating Doppler effect and generates a time‐varying vortex beam. All the results have been verified by simulation and measurements. In addition, the proposed strategy can be easily extended to other frequency regions and holds potential in areas such as information encryption, biosensing, and OAM multiplexing communication.
- 13 February 2023
- Published by Optica Publishing Group in Photonics Research
- Vol. 11 (3) , 373-382
Shape memory alloy-based 3D morphologically reconfigurable chiral metamaterial for tailoring circular dichroism by voltage control
Three-dimensional chiral materials with intrinsic chirality play a crucial role in achieving a strong chiral response and flexible light manipulation. Reconfigurable chirality through the 3D morphological transformation of chiral materials is significant for greater freedom in tailoring light but remains a challenge. Inspired by the unique 3D morphological memory capability of shape memory alloys (SMAs), we demonstrate and discuss a chiral resonator in the microwave regime that can realize reconfigurable chirality through 3D morphological transformation. The introduction of heating film realizes voltage control of SMA’s morphology for utilizing the temperature sensitivity of SMA better, enabling arbitrary control of circular dichroism (CD) flip and CD intensity. The qualitative and quantitative analysis of the surface current distribution of chiral enantiomers reveals that the chirality of meta-atoms originates from the surge of electric dipole p x and electric quadrupole Q. It is worth mentioning that the proposed strategy to achieve reconfigurable chirality using 3D morphological transformations can be directly extended to other higher frequencies, such as visible, infrared, and terahertz bands. Significantly, our paradigm to study the relationship between complex 3D morphology and chirality holds potential for application in biosensing, spin detection, and spin-selective devices.
- 13 February 2023
- Published by Optica Publishing Group in Photonics Research
- Vol. 11 (3) , 373-382
Shape memory alloy-based 3D morphologically reconfigurable chiral metamaterial for tailoring circular dichroism by voltage control
Three-dimensional chiral materials with intrinsic chirality play a crucial role in achieving a strong chiral response and flexible light manipulation. Reconfigurable chirality through the 3D morphological transformation of chiral materials is significant for greater freedom in tailoring light but remains a challenge. Inspired by the unique 3D morphological memory capability of shape memory alloys (SMAs), we demonstrate and discuss a chiral resonator in the microwave regime that can realize reconfigurable chirality through 3D morphological transformation. The introduction of heating film realizes voltage control of SMA’s morphology for utilizing the temperature sensitivity of SMA better, enabling arbitrary control of circular dichroism (CD) flip and CD intensity. The qualitative and quantitative analysis of the surface current distribution of chiral enantiomers reveals that the chirality of meta-atoms originates from the surge of electric dipole p x and electric quadrupole Q. It is worth mentioning that the proposed strategy to achieve reconfigurable chirality using 3D morphological transformations can be directly extended to other higher frequencies, such as visible, infrared, and terahertz bands. Significantly, our paradigm to study the relationship between complex 3D morphology and chirality holds potential for application in biosensing, spin detection, and spin-selective devices.