Youchao Xie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Youchao Xie has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Wenbin Shen
Wuhan University
5 shared publications - Pengfei Zhang
Wuhan University
4 shared publications - Ziyu Shen
Hubei University of Science and Technology
4 shared publications - An Ning
Wuhan University
2 shared publications - Kuangchao Wu
Henan Polytechnic University
2 shared publications - Lei Wang
Wuhan University
2 shared publications
Latest Publications
- Open Access
- 15 July 2026
- Published by Springer Nature in The European Physical Journal C
- Vol. 86 (7)
Formulation of testing gravitational redshift based on Laser Time link between China Space Station and a ground station
This paper presents a high-precision gravitational redshift test using the China Space Station (CSS) Laser Time Transfer (CLT) system. We develop a comprehensive observation equation based on a $$c^{-3}$$ order relativistic model for space-ground clock comparison. While the CSS optical clock system is currently in the orbital debugging phase, our simulation using actual CSS orbit data achieves a gravitational redshift verification precision of $$\mathrm {(1.8\pm 47)}\times {10}^{-7}$$ – approximately one order of magnitude improvement better than previous experiments. Our work represents the first application of laser-based time transfer for gravitational redshift verification at such precision, and the first use of the CSS CLT link for testing this fundamental aspect of General Relativity. Unlike microwave-based methods, our laser approach avoids ionospheric effects and first-order Doppler shifts. Residual analysis identifies tropospheric delay variations and atmospheric turbulence as the primary remaining uncertainty contributors. The achieved precision enables gravitational potential difference measurements with 0.1 m $$^{\textrm{2}}$$ /s $$^{\textrm{2}}$$ precision – offering new capabilities for both fundamental physics investigations and geodetic applications including intercontinental height transfer. This work establishes a new benchmark for high-precision tests of relativistic physics and demonstrates the transformative potential of space-based optical time transfer.- 15 July 2026
- Published by Springer Nature in The European Physical Journal C
- Vol. 86 (7)
Open AccessFormulation of testing gravitational redshift based on Laser Time link between China Space Station and a ground station
This paper presents a high-precision gravitational redshift test using the China Space Station (CSS) Laser Time Transfer (CLT) system. We develop a comprehensive observation equation based on a $$c^{-3}$$ order relativistic model for space-ground clock comparison. While the CSS optical clock system is currently in the orbital debugging phase, our simulation using actual CSS orbit data achieves a gravitational redshift verification precision of $$\mathrm {(1.8\pm 47)}\times {10}^{-7}$$ – approximately one order of magnitude improvement better than previous experiments. Our work represents the first application of laser-based time transfer for gravitational redshift verification at such precision, and the first use of the CSS CLT link for testing this fundamental aspect of General Relativity. Unlike microwave-based methods, our laser approach avoids ionospheric effects and first-order Doppler shifts. Residual analysis identifies tropospheric delay variations and atmospheric turbulence as the primary remaining uncertainty contributors. The achieved precision enables gravitational potential difference measurements with 0.1 m $$^{\textrm{2}}$$ /s $$^{\textrm{2}}$$ precision – offering new capabilities for both fundamental physics investigations and geodetic applications including intercontinental height transfer. This work establishes a new benchmark for high-precision tests of relativistic physics and demonstrates the transformative potential of space-based optical time transfer. - Open Access
- 14 March 2026
- Published by Copernicus GmbH
A GNSS-Based Single-Clock Method for Geopotential Difference Determination and Its Outlook with Optical Clocks
Here we propose a single-clock measurement scheme for determining the geopotential difference between two stations using a single clock combined with GNSS Precise Point Positioning (PPP) time-frequency transfer. An experiment was conducted on two remote stations, with a distance 129 km and a height difference 1245 m, using a single hydrogen maser. Utilizing the International GNSS Service (IGS) time as reference, the geopotential frequency shift between the two stations was extracted by comparing the frequency differences between the hydrogen maser and the IGS time before and after clock transportation, and the measured geopotential difference between the two stations is 12075.9±118.5 m2/s2, which shows consistency with the value derived from the EIGEN-6C4 global gravity field model, with a deviation of (-79±119) m2/s2. Compared with traditional dual-clock methods, this approach obviates the need for inter-clock calibration, reduces operational complexity and equipment investment costs, and improves data utilization efficiency. In the future, the integration of optical clocks into the GNSS observation system is anticipated achieving methodological breakthroughs. Hence, we expect the geopotential difference measurement by integrating optical-clock technology into the GNSS-based single-clock scheme. The prospects include the GNSS receivers connected with optical clock signals, the high-stability optical-to-radio frequency conversion, and the establishment of an integrated space–ground optical frequency network comprising satellite-borne optical clocks and fiber-connected ground stations. This approach is envisioned to enable high-precision geodetic applications, such as equi-frequency geoid definition, centimeter-level orthometric height transfer, global height datum unification, while providing a novel platform for fundamental physics investigations (such as gravitational waves and dark matter detections). These capabilities underscore the transformative potential of optical-clock-enhanced GNSS technology across both geodetic science and fundamental physic. This study is supported by the National Natural Science Foundation of China (NSFC) (Grant Nos. 42388102, 42030105, and 42274011), and Gravitation Center Project (NGL-2025-004).
- 14 March 2026
- Published by Copernicus GmbH
Open AccessA GNSS-Based Single-Clock Method for Geopotential Difference Determination and Its Outlook with Optical Clocks
Here we propose a single-clock measurement scheme for determining the geopotential difference between two stations using a single clock combined with GNSS Precise Point Positioning (PPP) time-frequency transfer. An experiment was conducted on two remote stations, with a distance 129 km and a height difference 1245 m, using a single hydrogen maser. Utilizing the International GNSS Service (IGS) time as reference, the geopotential frequency shift between the two stations was extracted by comparing the frequency differences between the hydrogen maser and the IGS time before and after clock transportation, and the measured geopotential difference between the two stations is 12075.9±118.5 m2/s2, which shows consistency with the value derived from the EIGEN-6C4 global gravity field model, with a deviation of (-79±119) m2/s2. Compared with traditional dual-clock methods, this approach obviates the need for inter-clock calibration, reduces operational complexity and equipment investment costs, and improves data utilization efficiency. In the future, the integration of optical clocks into the GNSS observation system is anticipated achieving methodological breakthroughs. Hence, we expect the geopotential difference measurement by integrating optical-clock technology into the GNSS-based single-clock scheme. The prospects include the GNSS receivers connected with optical clock signals, the high-stability optical-to-radio frequency conversion, and the establishment of an integrated space–ground optical frequency network comprising satellite-borne optical clocks and fiber-connected ground stations. This approach is envisioned to enable high-precision geodetic applications, such as equi-frequency geoid definition, centimeter-level orthometric height transfer, global height datum unification, while providing a novel platform for fundamental physics investigations (such as gravitational waves and dark matter detections). These capabilities underscore the transformative potential of optical-clock-enhanced GNSS technology across both geodetic science and fundamental physic. This study is supported by the National Natural Science Foundation of China (NSFC) (Grant Nos. 42388102, 42030105, and 42274011), and Gravitation Center Project (NGL-2025-004).
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
Simulation experiments for testing gravitational redshift using three optical frequency signals between satellite and ground station
Gravitational redshift, one of the fundamental predictions of general relativity, describes the relationship between the oscillation frequency of clocks and the gravitational field. Testing the gravitational redshift effect with higher precision not only provides an important verification of general relativity but may also reveal new physical phenomena. In this study, an uplink and two downlink signals are established between a geostationary satellite (S) and a ground station (E). By combining three signals with different frequencies, the first-order Doppler effects, as well as influences from the ionosphere and troposphere, can be effectively suppressed, allowing high-precision extraction of the gravitational redshift signal. This research presents simulated experimental results. The geostationary satellite, a BeiDou-3 satellite, is linked to the ground station located at the Luojia Time and Frequency Laboratory in Wuhan. Both the satellite and the ground are equipped with optical atomic clocks, each with a stability of 2×10−18 at 1 day. The uplink signal frequency is 1 THz, while the two downlink signals’ frequencies are 1.1 THz and 0.8 THz, respectively. The simulation results indicate that after 10 days of continuous observation, the accuracy in determining the geopotential difference between the average positions of the ground station and the satellite is better than 10 cm. This enables testing of the gravitational redshift effect at a precision level of 2×10−8. This study provides valuable insights and references for future high-precision gravitational redshift tests utilizing geostationary or even arbitrary satellites, with potential applications in gravity potential measurements. This study is supported by the National Natural Science Foundation of China (NSFC) (Grant Nos. 42388102, 42030105, and 42274011).
- 13 March 2026
- Published by Copernicus GmbH
Open AccessSimulation experiments for testing gravitational redshift using three optical frequency signals between satellite and ground station
Gravitational redshift, one of the fundamental predictions of general relativity, describes the relationship between the oscillation frequency of clocks and the gravitational field. Testing the gravitational redshift effect with higher precision not only provides an important verification of general relativity but may also reveal new physical phenomena. In this study, an uplink and two downlink signals are established between a geostationary satellite (S) and a ground station (E). By combining three signals with different frequencies, the first-order Doppler effects, as well as influences from the ionosphere and troposphere, can be effectively suppressed, allowing high-precision extraction of the gravitational redshift signal. This research presents simulated experimental results. The geostationary satellite, a BeiDou-3 satellite, is linked to the ground station located at the Luojia Time and Frequency Laboratory in Wuhan. Both the satellite and the ground are equipped with optical atomic clocks, each with a stability of 2×10−18 at 1 day. The uplink signal frequency is 1 THz, while the two downlink signals’ frequencies are 1.1 THz and 0.8 THz, respectively. The simulation results indicate that after 10 days of continuous observation, the accuracy in determining the geopotential difference between the average positions of the ground station and the satellite is better than 10 cm. This enables testing of the gravitational redshift effect at a precision level of 2×10−8. This study provides valuable insights and references for future high-precision gravitational redshift tests utilizing geostationary or even arbitrary satellites, with potential applications in gravity potential measurements. This study is supported by the National Natural Science Foundation of China (NSFC) (Grant Nos. 42388102, 42030105, and 42274011).
- 30 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-15
Experiments of Determining Geopotential Difference Between Two Remote Sites Using Two Hydrogen Clocks
Based on the principle of geopotential frequency shift in general relativity, according to the geopotential frequency shift equation, the geopotential difference between two locations can be determined by measuring the frequency shift of signals exchanged between them. In this study, two hydrogen masers with frequency stability of 5 × 10⁻¹⁵/day were employed, in combination with the GNSS Precise Point Positioning (PPP) technique, to conduct remote clock comparison experiments from March to July 2019. The experiments aimed to determine the geopotential difference between Jiugong Mountain and Wuhan. Through an innovative approach involving alternating zero-baseline and long-baseline observational schemes, systematic clock errors were effectively eliminated. Four experimental sessions were conducted, alternating between zero-baseline and long-baseline setups to mitigate systematic errors of the clocks. To address the complex noise characteristics in PPP observation data, Ensemble Empirical Mode Decomposition (EEMD) method was applied to extract effective signals related to geopotential frequency shifts. The results indicate that the measured orthometric height difference between Jiugong Mountain and Wuhan deviates by -7.8 m from the result derived from both the EGM2008 and EIGEN-6C4 models, with a measurement uncertainty of ±32.4 m, which is consistent with the frequency stability of the hydrogen maser used. This study provides a validation of the feasibility of determining geopotential differences using GNSS PPP-based remote clock frequency comparison in geodetic applications, offering an innovative solution for remote height transfer without relying on fiber-optic links.
- 30 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 75 (00189456) , 1-15
Experiments of Determining Geopotential Difference Between Two Remote Sites Using Two Hydrogen Clocks
Based on the principle of geopotential frequency shift in general relativity, according to the geopotential frequency shift equation, the geopotential difference between two locations can be determined by measuring the frequency shift of signals exchanged between them. In this study, two hydrogen masers with frequency stability of 5 × 10⁻¹⁵/day were employed, in combination with the GNSS Precise Point Positioning (PPP) technique, to conduct remote clock comparison experiments from March to July 2019. The experiments aimed to determine the geopotential difference between Jiugong Mountain and Wuhan. Through an innovative approach involving alternating zero-baseline and long-baseline observational schemes, systematic clock errors were effectively eliminated. Four experimental sessions were conducted, alternating between zero-baseline and long-baseline setups to mitigate systematic errors of the clocks. To address the complex noise characteristics in PPP observation data, Ensemble Empirical Mode Decomposition (EEMD) method was applied to extract effective signals related to geopotential frequency shifts. The results indicate that the measured orthometric height difference between Jiugong Mountain and Wuhan deviates by -7.8 m from the result derived from both the EGM2008 and EIGEN-6C4 models, with a measurement uncertainty of ±32.4 m, which is consistent with the frequency stability of the hydrogen maser used. This study provides a validation of the feasibility of determining geopotential differences using GNSS PPP-based remote clock frequency comparison in geodetic applications, offering an innovative solution for remote height transfer without relying on fiber-optic links.
- Open Access
- 1 July 2021
- Published by KEAI Publishing in Geodesy and Geodynamics
- Vol. 12 (4) , 258-265
Determination of the height of Mount Everest using the shallow layer method
- 1 July 2021
- Published by KEAI Publishing in Geodesy and Geodynamics
- Vol. 12 (4) , 258-265
Open AccessDetermination of the height of Mount Everest using the shallow layer method
- Open Access
- 3 March 2021
- Published by Copernicus GmbH
Determining the height of Mount Everest using the shallow layer method
We proposed an alternative method to determine the height of Mount Everest (HME) based on the shallow layer method (SLM), which was put forward by Shen (2006). We use the precise external global Earth gravity field model (i.e., EGM2008 and EIGEN-6C4 models) as input information, and the digital topographic model (i.e., DTM2006.0) and crust models (i.e., CRUST2.0 and CRUST1.0 models) to construct the shallow layer model. There are four combined strategies:(1) EGM2008 and CRUST1.0 models, (2) EGM2008 and CRUST2.0 models, (3) EIGEN-6C4 and CRUST1.0 models, and (4) EIGEN-6C4 and CRUST2.0 models, respectively. We calculate the HME by two approaches: first approach, the HME is directly calculated by combining the geoid undulation (N) and geodetic height (h); second approach, we calculate the HME by the segment summation approach (SSA) using the gravity field inside the shallow layer determined by the SLM. Numerical results show that for four combined strategies, the differences between our results and the authoritatively released value 8848.86 m by the Chinese and Nepalese governments on December 8, 2020 are 0.448 m, -0.009 m, -0.295 m, and -0.741 m using first approach and 0.539 m, 0.083 m, -0.214 m, and -0.647 m using second approach. The combined calculation of the HME by the terrain model and gravity field model is more accurate than that by the gravity field model alone. This study is supported by the National Natural Science Foundations of China (NSFC) under Grants 42030105, 41721003, 41804012, 41631072, 41874023, Space Station Project (2020)228.
- 3 March 2021
- Published by Copernicus GmbH
Open AccessDetermining the height of Mount Everest using the shallow layer method
We proposed an alternative method to determine the height of Mount Everest (HME) based on the shallow layer method (SLM), which was put forward by Shen (2006). We use the precise external global Earth gravity field model (i.e., EGM2008 and EIGEN-6C4 models) as input information, and the digital topographic model (i.e., DTM2006.0) and crust models (i.e., CRUST2.0 and CRUST1.0 models) to construct the shallow layer model. There are four combined strategies:(1) EGM2008 and CRUST1.0 models, (2) EGM2008 and CRUST2.0 models, (3) EIGEN-6C4 and CRUST1.0 models, and (4) EIGEN-6C4 and CRUST2.0 models, respectively. We calculate the HME by two approaches: first approach, the HME is directly calculated by combining the geoid undulation (N) and geodetic height (h); second approach, we calculate the HME by the segment summation approach (SSA) using the gravity field inside the shallow layer determined by the SLM. Numerical results show that for four combined strategies, the differences between our results and the authoritatively released value 8848.86 m by the Chinese and Nepalese governments on December 8, 2020 are 0.448 m, -0.009 m, -0.295 m, and -0.741 m using first approach and 0.539 m, 0.083 m, -0.214 m, and -0.647 m using second approach. The combined calculation of the HME by the terrain model and gravity field model is more accurate than that by the gravity field model alone. This study is supported by the National Natural Science Foundations of China (NSFC) under Grants 42030105, 41721003, 41804012, 41631072, 41874023, Space Station Project (2020)228.