Urša Pečan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Urša Pečan has a total of 61 co-authors. Here are the top co-authors by number of shared publications:
- Vesna Zupanc
Agronomy Department, Biotechnical Faculty, University of Ljubljana, Jamnikarjeva 101, 1000 Ljubljana, Slovenia
6 shared publications Luka Žvokelj
3 shared publicationsMarina Pintar
3 shared publications- Marina Pintar
Department of Agronomy, Biotechnical Faculty, University of Ljubljana, Jamnikarjeva 101, 1000 Ljubljana, Slovenia
3 shared publications Matjaž Pirnat
3 shared publications- Nejc Golob
Biotechnical Faculty, University of Ljubljana, Ljubljana, Slovenia
3 shared publications
Latest Publications
- Open Access
- 24 June 2026
- Published by Elsevier in Agricultural Water Management
- Vol. 333
Enhancing soil moisture retrievals from cosmic ray neutron sensor in a peri-urban agricultural landscape
- 24 June 2026
- Published by Elsevier in Agricultural Water Management
- Vol. 333
Open AccessEnhancing soil moisture retrievals from cosmic ray neutron sensor in a peri-urban agricultural landscape
- 23 March 2026
- Published by Science and Research Centre Koper
Monitoring vodne bilance tal pri različnih načinih obdelave tal
V okviru projekta Go-ToS-Oil smo proučevali vpliv različnih načinov obdelave tal (negovane ozelenjene ledine in obdelane ledine) na fizikalne lastnosti tal ter dinamiko vode v treh oljčnikih (Bošamarin, Marezige, Truške) v obdobju 2023–2025. Dvakrat letno (pozimi in poleti) smo vzorčili tla za določitev gostote tal, vsebnosti vode pri pF 2,0 in pF 4,2 ter hidravlične prevodnosti, hkrati pa so merilniki kontinuirano spremljali vlažnost tal na globinah 25 in 40 cm. Izvajali smo tudi analize vsebnosti hranil in biofenolov v listih. Rezultati so pokazali, da se fizikalne lastnosti tal spreminjajo skozi čas in so odvisne od obdelave ter globine tal. Ugotovili smo, da so razlike v vsebnosti vode glede na obdelavo tal najbolj izrazite poleti. Na lokaciji Bošamarin, kjer so bila tla globoko obdelana, je bila povprečna vsebnost vode višja na obdelanih tleh, medtem ko je bila na lokaciji Marezige največja vsebnost vode zabeležena na neobdelanih tleh, kar je verjetno posledica boljše strukture tal in manj izhlapevanja zaradi vegetacijske odeje. Na lokaciji Truške smo zaradi pomanjkanja signala na obdelanem delu ves čas imeli težave s podatki, zato interpretacija ni bila mogoča. Na podlagi foliarnih analiz med oljkami na obdelanih in neobdelanih tleh nismo opazili statistično značilnih razlik v vsebnosti biofenolov in mineralov, predvsem zaradi heterogenosti lokacij in majhnega števila vzorčenj. Kljub temu smo zaznali višje vsebnosti skupnih biofenolov pri obdelanih oljkah v Marezigah ter razlike v posameznih mineralih (bor v Bošamarinu, dušik in kalij v Marezigah). Za potrditev trendov in ugotavljanje dejanskega vpliva obdelave na oljke je treba raziskavo nadaljevati in povečati število vzorčenj na vsaki lokaciji, s čimer bomo zagotovili dovolj obsežno bazo podatkov za izvedbo robustnih in zanesljivih statističnih analiz ter zaključkov.
- 23 March 2026
- Published by Science and Research Centre Koper
Monitoring vodne bilance tal pri različnih načinih obdelave tal
V okviru projekta Go-ToS-Oil smo proučevali vpliv različnih načinov obdelave tal (negovane ozelenjene ledine in obdelane ledine) na fizikalne lastnosti tal ter dinamiko vode v treh oljčnikih (Bošamarin, Marezige, Truške) v obdobju 2023–2025. Dvakrat letno (pozimi in poleti) smo vzorčili tla za določitev gostote tal, vsebnosti vode pri pF 2,0 in pF 4,2 ter hidravlične prevodnosti, hkrati pa so merilniki kontinuirano spremljali vlažnost tal na globinah 25 in 40 cm. Izvajali smo tudi analize vsebnosti hranil in biofenolov v listih. Rezultati so pokazali, da se fizikalne lastnosti tal spreminjajo skozi čas in so odvisne od obdelave ter globine tal. Ugotovili smo, da so razlike v vsebnosti vode glede na obdelavo tal najbolj izrazite poleti. Na lokaciji Bošamarin, kjer so bila tla globoko obdelana, je bila povprečna vsebnost vode višja na obdelanih tleh, medtem ko je bila na lokaciji Marezige največja vsebnost vode zabeležena na neobdelanih tleh, kar je verjetno posledica boljše strukture tal in manj izhlapevanja zaradi vegetacijske odeje. Na lokaciji Truške smo zaradi pomanjkanja signala na obdelanem delu ves čas imeli težave s podatki, zato interpretacija ni bila mogoča. Na podlagi foliarnih analiz med oljkami na obdelanih in neobdelanih tleh nismo opazili statistično značilnih razlik v vsebnosti biofenolov in mineralov, predvsem zaradi heterogenosti lokacij in majhnega števila vzorčenj. Kljub temu smo zaznali višje vsebnosti skupnih biofenolov pri obdelanih oljkah v Marezigah ter razlike v posameznih mineralih (bor v Bošamarinu, dušik in kalij v Marezigah). Za potrditev trendov in ugotavljanje dejanskega vpliva obdelave na oljke je treba raziskavo nadaljevati in povečati število vzorčenj na vsaki lokaciji, s čimer bomo zagotovili dovolj obsežno bazo podatkov za izvedbo robustnih in zanesljivih statističnih analiz ter zaključkov.
- 23 March 2026
- Published by Science and Research Centre Koper
Vpliv oljčnih tropin na tla in odpadne vode
S projektom CRP V4-2216 Ohranjanje in izboljšanje proizvodnega potenciala tal za trajnostno pridelavo oljk (GO-TO S-OIL) smo želeli ovrednotiti neposredni učinek, ki ga imata čas in način uporabe oljčnih tropin, pridelanih v slovenskih oljarnah, na stanje tal, talno vodo, prehrano rastlin. Na območju slovenske Istre v oljčniku sorte ˈItranaˈ na lokaciji Marezige je bil zasnovan poljski poskus za ovrednotenje vpliva uporabe oljčnih tropin na okolje. Poskus je vključeval pet obravnav: kontrola ─ brez dodatka tropin – zatravljeno – obravnava 1; oljčne tropine, dodane na površino tal spomladi – obravnava 2; oljčne tropine, dodane in zadelane v tla spomladi – obravnava 3; oljčne tropine dodane na površino tal jeseni – obravnava 4; oljčne tropine dodane in vdelane v tla jeseni * – obravnava 5. Ugotovljeno je bilo, da oljčne tropine iz dvofazne predelave predstavljajo koristen organski dodatek za tla, saj izboljšujejo njihovo rodovitnost in zadrževanje vode. Vpliv oljčnih tropin na pH tal je odvisen od začetne kislosti tal. Spomladanski nanos oljčnih tropin lahko povzroči slabo ravnovesje hranil in izgubo dušika, zato je primernejši jesenski čas, ko je tveganje za izpiranje hranil in imobilizacija dušika manjše. Tropine je priporočljivo mehansko vdelati v tla, da se zmanjša možnosti točkovnega onesnaženja, vendar pa so zaradi vremenskih razmer možnosti mehanske vdelave v tla v jesenskem času lahko omejene. Za trajnostno rabo je nujno dolgoročno spremljanje vsebnosti težkih kovin, zlasti bakra in cinka, ki se lahko kumulativno nalagata ob ponavljajoči se uporabi oljčnih tropin.
- 23 March 2026
- Published by Science and Research Centre Koper
Vpliv oljčnih tropin na tla in odpadne vode
S projektom CRP V4-2216 Ohranjanje in izboljšanje proizvodnega potenciala tal za trajnostno pridelavo oljk (GO-TO S-OIL) smo želeli ovrednotiti neposredni učinek, ki ga imata čas in način uporabe oljčnih tropin, pridelanih v slovenskih oljarnah, na stanje tal, talno vodo, prehrano rastlin. Na območju slovenske Istre v oljčniku sorte ˈItranaˈ na lokaciji Marezige je bil zasnovan poljski poskus za ovrednotenje vpliva uporabe oljčnih tropin na okolje. Poskus je vključeval pet obravnav: kontrola ─ brez dodatka tropin – zatravljeno – obravnava 1; oljčne tropine, dodane na površino tal spomladi – obravnava 2; oljčne tropine, dodane in zadelane v tla spomladi – obravnava 3; oljčne tropine dodane na površino tal jeseni – obravnava 4; oljčne tropine dodane in vdelane v tla jeseni * – obravnava 5. Ugotovljeno je bilo, da oljčne tropine iz dvofazne predelave predstavljajo koristen organski dodatek za tla, saj izboljšujejo njihovo rodovitnost in zadrževanje vode. Vpliv oljčnih tropin na pH tal je odvisen od začetne kislosti tal. Spomladanski nanos oljčnih tropin lahko povzroči slabo ravnovesje hranil in izgubo dušika, zato je primernejši jesenski čas, ko je tveganje za izpiranje hranil in imobilizacija dušika manjše. Tropine je priporočljivo mehansko vdelati v tla, da se zmanjša možnosti točkovnega onesnaženja, vendar pa so zaradi vremenskih razmer možnosti mehanske vdelave v tla v jesenskem času lahko omejene. Za trajnostno rabo je nujno dolgoročno spremljanje vsebnosti težkih kovin, zlasti bakra in cinka, ki se lahko kumulativno nalagata ob ponavljajoči se uporabi oljčnih tropin.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Recent developments in cosmic ray soil moisture observing system in Slovenia
Reliable soil moisture observations are pivotal for informing sustainable agricultural decisions under an ongoing changing climate. A cosmic-ray soil moisture observing system (SI-COSMOS) network was established for the period 2025-2040 to enhance soil moisture monitoring in Slovenia. The rationale was based on extensive experience with point soil moisture sensors in operational decision-making at the farm level, where they proved highly vulnerable to damage from land operations and wildlife activity. At the same time, the information was limited to micro-local conditions. As an alternative, a less vulnerable, non-invasive, intermediate soil-moisture network was established. As of Jan 2026, the network consists of 14 cosmic ray neutron sensors (CRNS). In this contribution, we present the network architecture, current calibration experiences, and discuss the network's role in the national and international context.SI-COSMOS locations spread across the Continental, Alpine, Karst, Mediterranean, and Pannonian regions. Installed are lithium fluoride and boron carbide-based CRNS. The network's elevation ranges from 10 m to 500 m above sea level. Land use at locations includes olive groves (3), grasslands and pastures (2), hop plantations (2), mixed land-use systems (6), and forest (1), mainly under rainfed, but also irrigated (drip, drum, and pivot) conditions. Soil moisture is captured in various soil types.At the national scale, the vision of SI-COSMOS is to support investigating soil–water-plant–atmosphere interactions under diverse climate, land-use, and soil conditions, to support improved drought detection and management, as well as hydrological modelling and applications. Additionally, the network aims to further develop and validate surface soil moisture products based on remote sensing or modelled data, for improved large-scale soil moisture observations at the national and international scales. Products based on SI-COSMOS will support development of transferable real-time land management tools for enhanced water resilience.Acknowledgements: This research was funded by the Slovenian Research Agency (ARRS) with a grant to the Ph.D. students Nejc Golob and Špela Srdoč, and partially supported by research programme P4-0085, national targeted research project (V4-2406), Interreg Alpine Space program, project Alpine Space Drought Prediction (A-DROP) (grant number 101147797), European Union – LIFE Programme (LIFE23-IPC-SI-LIFE4ADAPT), OPTAIN Horizon 2020 (grant number 862756), the NextGenerationEU project ULTRA 4. Sustainable Environment, and the Slovenian CAP Strategic Plan 2023–2027.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessRecent developments in cosmic ray soil moisture observing system in Slovenia
Reliable soil moisture observations are pivotal for informing sustainable agricultural decisions under an ongoing changing climate. A cosmic-ray soil moisture observing system (SI-COSMOS) network was established for the period 2025-2040 to enhance soil moisture monitoring in Slovenia. The rationale was based on extensive experience with point soil moisture sensors in operational decision-making at the farm level, where they proved highly vulnerable to damage from land operations and wildlife activity. At the same time, the information was limited to micro-local conditions. As an alternative, a less vulnerable, non-invasive, intermediate soil-moisture network was established. As of Jan 2026, the network consists of 14 cosmic ray neutron sensors (CRNS). In this contribution, we present the network architecture, current calibration experiences, and discuss the network's role in the national and international context.SI-COSMOS locations spread across the Continental, Alpine, Karst, Mediterranean, and Pannonian regions. Installed are lithium fluoride and boron carbide-based CRNS. The network's elevation ranges from 10 m to 500 m above sea level. Land use at locations includes olive groves (3), grasslands and pastures (2), hop plantations (2), mixed land-use systems (6), and forest (1), mainly under rainfed, but also irrigated (drip, drum, and pivot) conditions. Soil moisture is captured in various soil types.At the national scale, the vision of SI-COSMOS is to support investigating soil–water-plant–atmosphere interactions under diverse climate, land-use, and soil conditions, to support improved drought detection and management, as well as hydrological modelling and applications. Additionally, the network aims to further develop and validate surface soil moisture products based on remote sensing or modelled data, for improved large-scale soil moisture observations at the national and international scales. Products based on SI-COSMOS will support development of transferable real-time land management tools for enhanced water resilience.Acknowledgements: This research was funded by the Slovenian Research Agency (ARRS) with a grant to the Ph.D. students Nejc Golob and Špela Srdoč, and partially supported by research programme P4-0085, national targeted research project (V4-2406), Interreg Alpine Space program, project Alpine Space Drought Prediction (A-DROP) (grant number 101147797), European Union – LIFE Programme (LIFE23-IPC-SI-LIFE4ADAPT), OPTAIN Horizon 2020 (grant number 862756), the NextGenerationEU project ULTRA 4. Sustainable Environment, and the Slovenian CAP Strategic Plan 2023–2027.
- Open Access
- 13 March 2026
- Published by Copernicus GmbH
Critical zone studies in pre-alpine climate
Weighing monolith lysimeters enable precise measurement of water balance parameters, including infiltration, evapotranspiration, and deep percolation as well as studies of solute fluxes within the complex soil–plant–atmosphere continuum. At the experimental field of the Biotechnical Faculty, University of Ljubljana, two monolith lysimeters were installed to study solute transport and to measure evapotranspiration. In addition to the installed lysimeters, an advanced meteorological station is located at the same site, enabling measurement of other meteorological variables required for calculating evapotranspiration. To expand and establish a critical zone research site, the lysimeter station was equipped with two cosmic ray neutron sensors for proximity moisture sensing, as well as sampling points for drainage water and groundwater quality. The research center serves as a focal point for soil water balance studies in the peri-urban area of a pre-Alpine climate in central Slovenia, and is a part of SI-COSMOS network that spreads across the Continental, Alpine, Karst, Mediterranean, and Pannonian regions. Biotechnical faculty critical zone research field enables quantification of hydrological processes that control the upper critical zone water balance and contaminant transport under changing climate conditions. Evaluation after the first decade of operation shows that advances in weighing technology, lower boundary condition control, and data processing have made high-precision lysimeters very useful tools; however, they require intensive, regular maintenance to ensure data quality. Drainage water monitoring indicates favorable water quality conditions for developing circular water and nature based solutions in per-urban agricultural landscape.Acknowledgements: This research was partially supported by ARIS research programme P4-0085, IC RRG-AG (IO-0022-0481-001), Interreg Alpine Space program, project Alpine Space Drought Prediction (A-DROP) (grant number 101147797), European Union – LIFE Programme (LIFE23-IPC-SI-LIFE4ADAPT), OPTAIN Horizon 2020 (grant number 862756), and the Slovenian CAP Strategic Plan 2023–2027 (grant number 33126-3/2025/23).
- 13 March 2026
- Published by Copernicus GmbH
Open AccessCritical zone studies in pre-alpine climate
Weighing monolith lysimeters enable precise measurement of water balance parameters, including infiltration, evapotranspiration, and deep percolation as well as studies of solute fluxes within the complex soil–plant–atmosphere continuum. At the experimental field of the Biotechnical Faculty, University of Ljubljana, two monolith lysimeters were installed to study solute transport and to measure evapotranspiration. In addition to the installed lysimeters, an advanced meteorological station is located at the same site, enabling measurement of other meteorological variables required for calculating evapotranspiration. To expand and establish a critical zone research site, the lysimeter station was equipped with two cosmic ray neutron sensors for proximity moisture sensing, as well as sampling points for drainage water and groundwater quality. The research center serves as a focal point for soil water balance studies in the peri-urban area of a pre-Alpine climate in central Slovenia, and is a part of SI-COSMOS network that spreads across the Continental, Alpine, Karst, Mediterranean, and Pannonian regions. Biotechnical faculty critical zone research field enables quantification of hydrological processes that control the upper critical zone water balance and contaminant transport under changing climate conditions. Evaluation after the first decade of operation shows that advances in weighing technology, lower boundary condition control, and data processing have made high-precision lysimeters very useful tools; however, they require intensive, regular maintenance to ensure data quality. Drainage water monitoring indicates favorable water quality conditions for developing circular water and nature based solutions in per-urban agricultural landscape.Acknowledgements: This research was partially supported by ARIS research programme P4-0085, IC RRG-AG (IO-0022-0481-001), Interreg Alpine Space program, project Alpine Space Drought Prediction (A-DROP) (grant number 101147797), European Union – LIFE Programme (LIFE23-IPC-SI-LIFE4ADAPT), OPTAIN Horizon 2020 (grant number 862756), and the Slovenian CAP Strategic Plan 2023–2027 (grant number 33126-3/2025/23).
- Open Access
- 20 January 2025
- Published by Copernicus GmbH
Soil restoration for urban areas: Exploring water-related ecosystem services and hydrological functionality
The challenge of restoring degraded landscapes or ecosystems and recultivating them in a way that maximizes the multifunctionality of the artificial soil depends on the extent of soil degradation and its causes. The process of land restoration is expensive, time-consuming and requires careful planning and collaboration between different stakeholders and sectors. In densely populated regions such as Central Europe, there are two major types of artificial soil ecosystems: restoration of landfills or mining pits and urban green infrastructure (e.g. urban tree sites, stormwater retention areas). To compensate for the increasing scarcity of arable land, soils with unfavorable properties must be improved and degraded land must be rehabilitated in order to fulfill soil functions and promote agricultural production.Engineered soils offer a solution for construction the top layer that allows the restored ecosystem to function. Such soils are made from excavated material and other mineral or organic waste and are composed to provide suitable conditions for plant growth and other ecosystem services provided by the soil.As the need for green spaces in urban areas is also increasing, e.g. to adapt and mitigate the urban heat island effect, soil is needed as a habitat for plants and engineered soil mixtures are required depending on the target location and purpose. Soil mixtures with suitable chemical, physical, biological and geotechnical properties (i.e. physical structure) are needed, which are suitable for the restoration of topsoil for various purposes (e.g. mining reclamation, urban greening) and can be used for the near-natural composition of functional soil layers suitable for reclamation and plant growth. Soil structural properties such as infiltration rate, pore volume and water retention capacity are crucial for the functionality of restored soils in the water cycle, especially in view of the increasing challenges posed by ongoing climate change.The aim of this study is to provide a comprehensive overview of the experiences made at research sites in Slovenia and Austria with the application of engineered soils for the restoration of degraded areas. The focus of the contribution is set on different regulatory requirements and methods to ensure the proposed soil hydrological functionality.This research has been financed by ARIS BI-AT-22-23-019, LIFE20 IPE/SI/000021 ReStart and OEAD WTZ SI 01/2023.
- 20 January 2025
- Published by Copernicus GmbH
Open AccessSoil restoration for urban areas: Exploring water-related ecosystem services and hydrological functionality
The challenge of restoring degraded landscapes or ecosystems and recultivating them in a way that maximizes the multifunctionality of the artificial soil depends on the extent of soil degradation and its causes. The process of land restoration is expensive, time-consuming and requires careful planning and collaboration between different stakeholders and sectors. In densely populated regions such as Central Europe, there are two major types of artificial soil ecosystems: restoration of landfills or mining pits and urban green infrastructure (e.g. urban tree sites, stormwater retention areas). To compensate for the increasing scarcity of arable land, soils with unfavorable properties must be improved and degraded land must be rehabilitated in order to fulfill soil functions and promote agricultural production.Engineered soils offer a solution for construction the top layer that allows the restored ecosystem to function. Such soils are made from excavated material and other mineral or organic waste and are composed to provide suitable conditions for plant growth and other ecosystem services provided by the soil.As the need for green spaces in urban areas is also increasing, e.g. to adapt and mitigate the urban heat island effect, soil is needed as a habitat for plants and engineered soil mixtures are required depending on the target location and purpose. Soil mixtures with suitable chemical, physical, biological and geotechnical properties (i.e. physical structure) are needed, which are suitable for the restoration of topsoil for various purposes (e.g. mining reclamation, urban greening) and can be used for the near-natural composition of functional soil layers suitable for reclamation and plant growth. Soil structural properties such as infiltration rate, pore volume and water retention capacity are crucial for the functionality of restored soils in the water cycle, especially in view of the increasing challenges posed by ongoing climate change.The aim of this study is to provide a comprehensive overview of the experiences made at research sites in Slovenia and Austria with the application of engineered soils for the restoration of degraded areas. The focus of the contribution is set on different regulatory requirements and methods to ensure the proposed soil hydrological functionality.This research has been financed by ARIS BI-AT-22-23-019, LIFE20 IPE/SI/000021 ReStart and OEAD WTZ SI 01/2023.
- Open Access
- 1 June 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Irrigation and Drainage Engineering
- Vol. 148 (6) , 04022016
Evaluation of Default, Soil-Specific, and Clay Content Correction Calibration Functions for Dielectric Sensors in Soils with Differing Properties
Correct soil water content measurement is important for various environmental and agricultural applications. The aim of this study was to evaluate the performance of two commercially available dielectric sensors, the SM150T (Delta-T Devices) and TRIME-Pico 32 (IMKO). We evaluated the manufacturer’s calibration functions and the two-point calibration function recommended by Delta-T Devices. The coefficients of the two-point calibration showed a statistically significant dependence on clay content. Because the soils tested contained a wide range of clay contents, a clay content correction function was developed. Soil-specific calibration functions were also developed. In general, measurement errors were the largest when the manufacturer’s calibration was used, but were smaller for the SM150T [root mean square error (RMSE) of 0.011 to ] compared to the TRIME-Pico 32 (RMSE of 0.030 to ). The errors decreased after applying the clay content correction function for TRIME-Pico 32. For both sensor types, the two-point calibration reduced the errors, and the soil-specific calibration yielded the lowest error rates.- 1 June 2022
- Published by American Society of Civil Engineers (ASCE) in Journal of Irrigation and Drainage Engineering
- Vol. 148 (6) , 04022016
Open AccessEvaluation of Default, Soil-Specific, and Clay Content Correction Calibration Functions for Dielectric Sensors in Soils with Differing Properties
Correct soil water content measurement is important for various environmental and agricultural applications. The aim of this study was to evaluate the performance of two commercially available dielectric sensors, the SM150T (Delta-T Devices) and TRIME-Pico 32 (IMKO). We evaluated the manufacturer’s calibration functions and the two-point calibration function recommended by Delta-T Devices. The coefficients of the two-point calibration showed a statistically significant dependence on clay content. Because the soils tested contained a wide range of clay contents, a clay content correction function was developed. Soil-specific calibration functions were also developed. In general, measurement errors were the largest when the manufacturer’s calibration was used, but were smaller for the SM150T [root mean square error (RMSE) of 0.011 to ] compared to the TRIME-Pico 32 (RMSE of 0.030 to ). The errors decreased after applying the clay content correction function for TRIME-Pico 32. For both sensor types, the two-point calibration reduced the errors, and the soil-specific calibration yielded the lowest error rates. - Open Access
- 27 March 2022
- Published by Copernicus GmbH
Soil water retention curves determined in the laboratory and in the field
Soil water retention curves (SWRCs) provide information on the energy status of soil water and its availability to plants and are therefore important for irrigation management. SWRCs have traditionally been determined in the laboratory. With the development of new equipment that allows continuous measurement of soil water content and matric potential, it is possible to generate SWRCs in the field. The objective of our study was to determine SWRCs from continuous measurements in the field using dielectric methods and to see how SWRCs change over time. We compared them to SWRCs determined in the laboratory on undisturbed soil samples using the evaporation method (HYPROP®, METERgroup, Munich, Germany). Both the SWRCs determined in the field and in the laboratory were based on drying data only. Our results show significant differences between the SWRCs determined in the laboratory and in the field. For a given value of the matric potential, SWRCs in the laboratory often reach higher water contents, which can be attributed to the difference in soil wetting in the laboratory and in the field. The SWRCs constructed in the field also exhibit temporal variations. Therefore, we can conclude that the use of a single laboratory-constructed SWRC is not sufficient to describe the relationship between soil water content and matric potential.
- 27 March 2022
- Published by Copernicus GmbH
Open AccessSoil water retention curves determined in the laboratory and in the field
Soil water retention curves (SWRCs) provide information on the energy status of soil water and its availability to plants and are therefore important for irrigation management. SWRCs have traditionally been determined in the laboratory. With the development of new equipment that allows continuous measurement of soil water content and matric potential, it is possible to generate SWRCs in the field. The objective of our study was to determine SWRCs from continuous measurements in the field using dielectric methods and to see how SWRCs change over time. We compared them to SWRCs determined in the laboratory on undisturbed soil samples using the evaporation method (HYPROP®, METERgroup, Munich, Germany). Both the SWRCs determined in the field and in the laboratory were based on drying data only. Our results show significant differences between the SWRCs determined in the laboratory and in the field. For a given value of the matric potential, SWRCs in the laboratory often reach higher water contents, which can be attributed to the difference in soil wetting in the laboratory and in the field. The SWRCs constructed in the field also exhibit temporal variations. Therefore, we can conclude that the use of a single laboratory-constructed SWRC is not sufficient to describe the relationship between soil water content and matric potential.
- Open Access
- 3 March 2021
- Published by Copernicus GmbH
Measurement of soil hydraulic properties of structured and repacked soils
Soil hydraulic properties provide important information about soil behavior under unsaturated and saturated conditions. Often sampling of undisturbed soils is not possible and soil samples have to be repacked for laboratory analysis. The HYPROP® measuring system (METERgroup, Munich, Germany) is a convenient method for determination of soil water retention characteristics and unsaturated hydraulic conductivity of undisturbed soil samples. It measures the matric potential of the saturated and drying soil sample using two tensiometers placed at different depths. Although the tensiometers are based on a new design that theoretically withstands cavitation at higher tension values, they are still considered to operate in the low tension range. Since soil water retention properties in the low tension range are strongly influenced by soil structure and pore size distribution, we were interested in the changes in hydraulic properties when measured on disturbed and then repacked samples, and undisturbed soil samples. Therefore, we investigated the soil hydraulic properties of three different soil types using the evaporation method on undisturbed and repacked samples. The results provide important insights for the interpretation of the results when the collection of undisturbed samples is not possible, and for designing laboratory experiments with repacked soils.
- 3 March 2021
- Published by Copernicus GmbH
Open AccessMeasurement of soil hydraulic properties of structured and repacked soils
Soil hydraulic properties provide important information about soil behavior under unsaturated and saturated conditions. Often sampling of undisturbed soils is not possible and soil samples have to be repacked for laboratory analysis. The HYPROP® measuring system (METERgroup, Munich, Germany) is a convenient method for determination of soil water retention characteristics and unsaturated hydraulic conductivity of undisturbed soil samples. It measures the matric potential of the saturated and drying soil sample using two tensiometers placed at different depths. Although the tensiometers are based on a new design that theoretically withstands cavitation at higher tension values, they are still considered to operate in the low tension range. Since soil water retention properties in the low tension range are strongly influenced by soil structure and pore size distribution, we were interested in the changes in hydraulic properties when measured on disturbed and then repacked samples, and undisturbed soil samples. Therefore, we investigated the soil hydraulic properties of three different soil types using the evaporation method on undisturbed and repacked samples. The results provide important insights for the interpretation of the results when the collection of undisturbed samples is not possible, and for designing laboratory experiments with repacked soils.
- Open Access
- 3 March 2021
- Published by Copernicus GmbH
Characterization of hydraulic properties in the upper vadose zone for two aquifers in Slovenia
Environmental tracers, present in the environment and provided by nature, provide integrative information about both water flow and transport. For studying water flow and solute transport, the hydrogen and oxygen isotopes are of special interest, as their ratios provide a tracer signal with every precipitation event and are seasonally distributed. In order to follow the seasonal distribution of stable isotopes in the soil water and use this information for identifying hydrological processes and hydraulic properties, soil was sampled three times in three profiles, two on Krško polje aquifer in SE Slovenia and one on Ljubljansko polje in central Slovenia. Isotope composition of soil water was measured with the water-vapor-equilibration method. Based on the isotope composition of soil water integrative information about water flow and transport processes with time and depth below ground were assessed. Porewater isotopes were in similar range as precipitation for all three profiles. Variable isotope ratios in the upper 60 cm for the different sampling times indicated dynamic water fluxes in this upper part of the vadose zone. Results also showed more evaporation at one sampling location, Brege. The information from stable isotopes will be of importance for further analyzing the water fluxes in the vadose zone of the study sties. This research was financed by the ARRS BIAT 20-21-32 and IAEA CRP 1.50.18 Multiple isotope fingerprints to identify sources and transport of agro-contaminants.
- 3 March 2021
- Published by Copernicus GmbH
Open AccessCharacterization of hydraulic properties in the upper vadose zone for two aquifers in Slovenia
Environmental tracers, present in the environment and provided by nature, provide integrative information about both water flow and transport. For studying water flow and solute transport, the hydrogen and oxygen isotopes are of special interest, as their ratios provide a tracer signal with every precipitation event and are seasonally distributed. In order to follow the seasonal distribution of stable isotopes in the soil water and use this information for identifying hydrological processes and hydraulic properties, soil was sampled three times in three profiles, two on Krško polje aquifer in SE Slovenia and one on Ljubljansko polje in central Slovenia. Isotope composition of soil water was measured with the water-vapor-equilibration method. Based on the isotope composition of soil water integrative information about water flow and transport processes with time and depth below ground were assessed. Porewater isotopes were in similar range as precipitation for all three profiles. Variable isotope ratios in the upper 60 cm for the different sampling times indicated dynamic water fluxes in this upper part of the vadose zone. Results also showed more evaporation at one sampling location, Brege. The information from stable isotopes will be of importance for further analyzing the water fluxes in the vadose zone of the study sties. This research was financed by the ARRS BIAT 20-21-32 and IAEA CRP 1.50.18 Multiple isotope fingerprints to identify sources and transport of agro-contaminants.