CCCaroline Chalumeau

Caroline Chalumeau

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Caroline Chalumeau has a total of 55 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    New 2010 Maule Aftershock Catalog Reveals Structure of the Deep Subduction Interface

    by C. Chalumeau, A. Rietbrock

    On 27 February 2010, a Mw 8.8 earthquake occurred near Maule in south‐central Chile. The subsequent rapid deployment of a dense network of seismic stations on land was able to capture the first year of its aftershock sequence. Here, we revisit this data set using picking Artificial Intelligence tools, a 3D velocity model of the region and double‐difference techniques, to obtain a catalog of 146950 well‐constrained events. We observe many features first documented by studies using less dense aftershock catalogs, including the presence of important outer rise seismicity in the north, the occurrence of small earthquake sequences in the volcanic arc, the pervasive faulting associated with the Mw 6.9 11 March 2010 Pichilemu earthquake, and the separation of plate interface seismicity into two groups located at 15–40 km depth and 40–55 km depth. We focus on the deeper part of the plate interface seismicity (40–55 km depth), located at the bottom of the seismogenic zone, to investigate its structure. In this region, earthquakes seem to occur primarily on non‐overlapping planes existing within a ∼1.6 km thick zone. Many of these events form 100 m to km scale long streaks aligned along dip, which might be linked to the presence of afterslip in the region. We speculate that these small lineations may occur within individual blocks smeared along the subduction interface, or alternatively that they may occur within aligned chains of blocks.

  • Onshore-offshore post-seismic data analysis of the Mw=7.8 2016 Pedernales earthquake (Ecuador) : key to understanding earthquake supercycles

    by Caroline Chalumeau

    Analyse des données post-sismiques terre-mer du séisme de Pedernales 2016 Mw=7.8 (Équateur) : une clef pour comprendre les supercycles sismiques: La zone de subduction qui s'étend du nord de l'Equateur au sud de la Colombie a subi une séquence de grands séismes au cours du XXe siècle. Cette séquence débute en 1906 avec un séisme de magnitude 8.4-8.8, qui rompt une portion du chevauchement d'interplaque d'environ 200-500 km de long. S'ensuit ensuite trois grand séismes de magnitudes 7.6 à 8.2, qui rompent à nouveau cette zone du sud au nord en 1942, 1958 et 1979. Cette séquence est à nouveau amorcée en 2016 lorsque le séisme de Pedernales casse la zone de rupture du séisme de 1942, marquant ainsi peut-être le début d'une nouvelle cascade sismique.Le séisme de Pedernales et ses répliques, enregistrées grâce au déploiement de stations sismiques dans les mois suivant le séisme, permettent de mieux comprendre la zone. Cette thèse s'intéresse tout particulièrement aux interactions entre sismicité et glissement asismique dans la région, ainsi qu'au lien entre la sismicité et la structure de la zone de subduction.Pour ce faire, un catalogue de séismes répétitifs est élaboré par corrélation à partir du catalogue de répliques existant. Les données sont également scannées par template-matching afin de compléter les familles de séismes répétitifs. Ceux-ci sont ensuite relocalisés dans un modèle de vitesse 1D grâce à des pointés manuels et à des temps relatifs d'arrivée. Enfin, nous déterminons les propriétés de sources d'une partie des répliques de Pedernales.Les séismes répétitifs en Equateur ont lieu principalement au sein de clusters de sismicité, en marge des zones de glissement post-sismique. Par ailleurs, le glissement associé aux familles individuelles de séismes répétés ne semble pas avoir de lien direct avec le glissement modélisé à l'aide de données GNSS. Il semble au contraire être bien plus hétérogène, laissant penser à un lien plus complexe entre glissement asismique et séismes répétitifs, et reflétant probablement une géométrie complexe de la zone de subduction.Par ailleurs, l'étude des propriétés de sources des répliques de Pedernales met en évidence une segmentation de la zone de subduction basée sur la distance à la fosse. Les chutes de contrainte des séismes près de la fosse sont basses, et diminuent au cours du temps durant la période postsismique, comme le montre l'étude des séismes répétitifs. Cela est probablement dû à une variation de pression des fluides, qui sont très abondants au niveau de la fosse, et qui jouent un rôle crucial dans le comportement sismogène de la zone.

  • Open Access

    From flat to steep subduction: the South Peru margin imaged by a new high-density seismic catalogue

    by Caroline Chalumeau, Hugo Samuel Sánchez-Reyes, Jannes Münchmeyer, Mickael Langlais, Juan Carlos Villegas-Lanza, Alex Gonzales, Edmundo Norabuena, Hernando Tavera, Anne Socquet

    SUMMARY: The South Peru subduction zone is a complex, highly active region, which has hosted four Mw 8+ earthquakes over the last 100 yr. It marks the transition between the flat slab associated with the Nazca Ridge subduction in the North and more steeply dipping subduction in the South, causing the slab to contort and affecting seismicity patterns in the region. In this study, we present the first high-density, high-quality seismic catalogue of the region between the arc and the trench, totalling 166 825 events between 2022 January 1 and 2024 December 31, including 125 467 well-located ones. We first picked and associated phases using PhaseNet and PyOcto, then located the resulting events with NonLinLoc-SSST and GrowClust3D. Finally, we derived a new slab model from the seismicity, allowing us to classify the earthquakes as upper plate (16 per cent), interface (12 per cent), lower plate (68 per cent), outer rise (0.20 per cent) and human-related (3.1 per cent). The region is broadly divided into four subregions with different seismicity patterns and slab geometries: the flat slab, with intense interface and intraslab activity, the slab transition zone, where the plate contorts to accommodate its change in geometry, the Arequipa region, with intense upper plate seismicity but very low intraslab and interface seismicity and the North Chile region, with a large band of dense intraslab seismicity. We find that in the flat slab region, the Nazca Ridge is linked to the presence of dense seismicity close to the trench, and seismic swarms hinting at the presence of slow slip. Meanwhile, the intraslab seismicity in that region is organized in trench-parallel bands which are likely related to slab bending. In the slab transition region, we image multiple orthogonal faults just south of the slab contortion, suggesting a damaged slab. Further south, in the Arequipa region, upper plate seismicity forms a large, trenchward-dipping structure seemingly connected to the Incapuquio fault at the surface. Finally, in North Chile, the deep band of intraslab seismicity appears to locate further downdip as we move to the north, perhaps reflecting changes in slab properties.


  • Open Access

    Influence of ridge subduction on seismicity in South Peru

    by Caroline Chalumeau, Hugo Sanchez Reyes, Jannes Münchmeyer, Mickael Langlais, Juan Carlos Villegas Lanza, Alex Gonzales, Edmundo Norabuena, Hernando Tavera, Anne Socquet

    The South Peru subduction zone is a complex, highly active region, where the flat slab associated with the Nazca Ridge subduction in the North transitions to a much steeper subduction in the South. This transition not only causes the slab to contort, but affects seismicity patterns in the region. Here we use data from 26 seismic stations active from March 2022 to December 2024 as part of the DEEPTrigger project, along with 16 permanent Peruvian stations and 15 permanent Chilean stations, to create a 3-year seismicity catalogue of South Peru. Using PhaseNet for phase picking and PyOcto for phase association, we obtain a total of 166 971 events. These earthquakes are located with NonLinLoc-SSST using a new 3-D P and S-wave velocity model of the region obtained from full-waveform inversion (Kan et al., 2025), then relocated using double difference methods with cross-correlation times to obtain precise locations. We thus obtain the first dense and precisely-located earthquake catalog of the region.With this new catalog, we are able to demonstrate the influence of the Nazca Ridge on seismicity patterns. We find numerous shallow seismic swarms where the ridge enters subduction, while they are absent from the rest of the margin. In combination with GPS records of nearby stations, they hint at the likely presence of slow slip. We also find that the edge of the Nazca Ridge is particularly active, down to depths below 80 km. This same edge was activated by the Mw 7.2 Acari earthquake which occurred on June 28th 2024 at the plate interface, and was preceded by a Mw 6.0 intraslab foreshock on June 16th 2024. The Acari mainshock triggered a large aftershock expansion towards the northwest where the Nazca Ridge subducts, and a triggered swarm and possible SSE in that region. It also caused an increase of intraplate seismicity directly downdip along the Nazca Ridge edge, demonstrating the ridge’s ability to concentrate stress.

  • Open Access

    Structure of South Peruvian Upper Crust Revealed by Magnetotellurics and Shallow Seismicity: Implications for Geothermal Fluid Circulation and Crustal Temperatures

    by Audrey Taillefer, José Luis Torres Aguilar, Svetlana Byrdina, Caroline Chalumeau, Hugo Samuel Sánchez-Reyes, Volker Rath, Laurence Audin, Swann Swann, Gonzalo Romero-Beltran, Rossmary Pinto Chávez, et al.

    Active orogenic zones such as the Andes are rarely considered as potential geothermal resources, despite their high topographic gradient responsible for driving meteoric fluids and the presence of numerous hydrothermal springs. This study explores the different contexts of the emergence of hydrothermal springs in the Andean forearc in Southern Peru (Tacna region). New magnetotelluric data and the location of the 2022-2024 seismicity reveal the compartments of the upper crust where hydrothermal fluids circulate into two different contexts: (i) the volcanic system: beneath the volcanic arc, a seismic cluster (13-20 km deep) separates two conductive bodies, one spherical (5 km deep) and the second elongated (0.5-2 km deep), revealing a magma chamber and hydrothermal fluids over-pressurized and trapped under a clay cap. (ii) the orogenic system: beneath the forearc range (5 km high), an elongated conductive body (0-18 km deep) marks the location of the Calientes thrust, while the alignment of a triangular-shaped resistive body (1-18 km deep) and of a seismic cluster (down to 20 km deep) reveal the cold basement uplifted by the active faults of Incapuquio. The forearc basin and the underlying basement are revealed by a conductive and resistive body, respectively. Based on these results, we propose a conceptual model in which fluids infiltrating the forearc range use a network of crustal faults to be transferred at depth, dramatically disrupting the geothermal gradient laterally over distances of kilometers (18-150°C.km-1). They are then transferred to the forearc basin, where the main population centers are located.

  • Open Access

    New 2010 Maule aftershock catalog reveals structure of the deep subduction interface

    by Caroline Chalumeau, Andreas Rietbrock

    On February 27th 2010, a Mw 8.8 earthquake occurred near Maule in south-central Chile. The subsequent rapid deployment of a dense network of seismic stations on land was able to capture the first year of its aftershock sequence. Here, we revisit this dataset using picking Artificial Intelligence tools, a 3D velocity model of the region and double-difference techniques, to obtain a catalog of 215582 aftershocks, including 146950 well-constrained events. We observe many features first documented by studies using less dense aftershock catalogs, including the presence of important outer rise seismicity in the north, the occurrence of small earthquake sequences in the volcanic arc, the pervasive faulting associated with the Mw 6.9 March 11th 2010 Pichilemu, and the separation of plate interface seismicity into two groups located at 15-40 km depth and 40-55 km depth. We focus on the deeper part of the plate interface seismicity (40-55km depth), located in the transition zone at the bottom of the seismogenic zone, to investigate its structure. In this region, earthquakes tend to occur on juxtaposed planes within a ~1.6 km thick zone. Many of these events form 100m to km scale long streaks aligned along dip, which might be linked to the presence of afterslip in the region. Knowing that the subduction interface at this depth likely has a block-in-matrix structure, we speculate that these small lineations may occur within individual blocks smeared along the subduction, or alternatively that they may occur within aligned chains of blocks jamming the subduction.

  • Open Access

    Deep-shallow interactions in the 2024 Acari sequence (South Peru)

    by Caroline Chalumeau, Hugo Sanchez-Reyes, Sebastien Chevrot, Bertrand Lovery, Juan-Carlos Villegas, Alex Gonzales, Mickael Langlais, Edmundo Norabuena, Jannes Munchmeyer, Vadim Monteiller, et al.

    The southern Peru subduction zone is a complex region, marking the transition between the flat slab associated with the Nazca Ridge subduction in the North and a much steeper subduction in the south. The area has been affected by several large earthquakes over the past 20 years, like the Mw 7.2 earthquake that occurred on June 28th 2024 close to the city of Acari, in an area that already ruptured in 2013 and 2018. Here we use data from 26 seismic stations active from March 2022 to December 2024 as part of the DEEPTrigger project, along with 16 permanent Peruvian stations and 15 permanent Chilean stations, to create a 3-year seismicity catalogue of South Peru. Using PhaseNet for the detection and picking of phases and PyOcto for their association, we obtain a total of 154645 events. These earthquakes are located with NonLinLoc using a new 3D P and S-wave velocity model of the region obtained from full-waveform inversion. They are then relocated using double difference methods with cross-correlation times to obtain precise locations. This allows us to image seismic structures along the subduction zones, thus demonstrating the influence of interseismic coupling and of bathymetric features like the Nazca Ridge on seismicity patterns. We focus in particular on the Acari sequence, which occurred at the edge of the Nazca Ridge. The Mw 7.2 mainshock was preceded by a Mw 6 foreshock on June 16th 2024, with both earthquakes seemingly occurring at the plate interface. We show that both the foreshock and the mainshock activated intraslab seismicity along the whole edge of the ridge down to 100 km depth, thus providing a good example of far-field interactions between deep and shallow regions of the subduction.

  • Open Access

    Seismological evidence for a multi-fault network at the Ecuadorian subduction interface

    by Caroline Chalumeau, Hans Agurto-Detzel, Andreas Rietbrock, Michael Frietsch, Onno Oncken, Monica Segovia, Audrey Galve

    The simplified view of the subduction interface is that of a single plane along which seismic and aseismic deformation occurs. In reality, however, exhumed subduction zones and geophysical imaging have shown that the seismogenic plate interface is a deformed, 100m-1km thick tabular region. Within this region, we currently do not know if seismic slip is localized on a single fault or distributed over several active faults, and how this impacts seismogenesis and the timing of deformation. Here, we use high-resolution earthquake locations to shed light on these questions.We focus on the aftershock sequence of the March 27th 2022, Mw 5.8 Esmeraldas earthquake which occurred at 19 km depth at the plate interface in Ecuador, and which was recorded by the dense temporary seismic network deployed during the HIPER2 marine campaign. We use machine learning to detect and pick over 1700 earthquakes (Mw 0-3), which we then locate using a double difference algorithm with cross-correlation times and a 3D velocity model. This allows us to obtain an exceptionally detailed image of the seismicity at the plate interface, which falls into a 200-400 m thick zone, comparable to plate interface thicknesses observed in exhumed subduction zones. Using a cross-correlation threshold of 0.75, we extract families of similar earthquakes, whose geometry we investigate using the 3-point method. These families generally occur on subparallel, sometimes superposed planes with a thickness of 0-40 m that is comparable to the thickness of individual fault zones observed within fossil subduction shear zones. These individual fault zones appear to form a network whose geometry impacts the aftershock expansion, itself controlled by afterslip rather than diffusive processes, thus demonstrating the importance of considering the 3D structure of the plate interface when modeling slip.


  • Open Access

    What repeating earthquakes can tell us about postseismic slip and fluid circulation in the Ecuadorian subduction zone

    by Caroline Chalumeau, Hans Agurto-Detzel, Louis De Barros, Philippe Charvis

    The Ecuador-Colombia subduction zone is a complex and spatially heterogeneous region that hosts both shallow aseismic slip and large megathrust earthquakes, and where both inter-seismic and post-seismic seismicity have been linked to aseismic slip. Repeating earthquakes, which are the result of repeated loading and failure of single asperities on a fault, are a valuable tool in studying aseismic slip as well as in monitoring the evolution of fault properties over time. In this study, we search for repeating earthquakes within one year of aftershocks following the April 16th, 2016 Mw 7.8 Pedernales earthquake, and we analyze their relationship to afterslip and the evolution of their source properties. We calculate waveform cross-correlation coefficients (CC) on 4762 catalog events, and use a threshold CC of 0.95 to sort events into preliminary families, which are then completed using template-matching and relocated using HypoDD. In total, 376 earthquakes were classified into 62 families of 4 to 15 earthquakes. Additionally, the magnitudes, corner frequencies and stress drops of 136 repeaters were determined using spectral ratios.We find an increase in the recurrence time of repeating events with time after the mainshock, highlighting a possible timeframe for the afterslip’s deceleration. However, repeating earthquakes appear to concentrate around the areas of largest afterslip release, where afterslip gradient is the highest. This suggests that while most repeating aftershocks are linked to afterslip release, the afterslip gradient may play a bigger role in determining their location than previously thought. We also find that repeaters in the region near the trench are unusual, in that their stress drops are anomalously low and systematically decrease over the postseismic period, hinting at a potential increase in pore fluid pressure in this region over time.

  • Open Access

    Spatio‐Temporal Evolution of Aftershock and Repeater Source Properties After the 2016 Pedernales Earthquake (Ecuador)

    by Caroline Chalumeau, Hans Agurto‐Detzel, Louis De Barros, Philippe Charvis, the Rapid Response Team of the 2016 Pedernales Earthquake

    Subduction zones are highly heterogeneous regions capable of hosting large earthquakes. To better constrain the processes at depth, we analyze the source properties of 1514 aftershocks of the 16th April 2016 Mw 7.8 Pedernales earthquake (Ecuador) using spectral ratios. We are able to retrieve accurate seismic moments, stress drops, and P and S corner frequencies for 341 aftershocks, including 136 events belonging to families of repeating earthquakes. We find that, for the studied magnitude range (Mw 2–4), stress drops appear to increase as a function of seismic moment. They are also found to depend on their distance to the trench. This is in part explained by the increase in depth, and therefore normal stress, away from the trench. However, even accounting for the shallow depths of earthquakes, stress drops appear to be anomalously low near the trench, which can be explained by a high pore fluid pressure or by inherent properties of the medium (low coefficient of friction/low rigidity of the medium) in that region. We are also able to examine the temporal evolution of source properties thanks to the presence of repeating earthquakes. We find that the variations of source properties within repeating earthquake families are not uniform, and are highly spatially variable over most of the study area. This is not the case near the trench, however, where stress drops systematically decrease over time. We suggest that this reflects an increase in pore fluid pressure near the trench over the postseismic period.