Louise R. Smith
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Louise R. Smith has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
- Graham John Hutchings
Cardiff University
12 shared publications - Nicholas F. Dummer
Max Planck-Cardiff Centre on the Fundamentals of Heterogeneous Catalysis FUNCAT, Translational Research Hub, Cardiff University, Maindy Road, Cardiff CF24 4HQ, U.K.
9 shared publications - Stuart Hamilton Taylor
Max Planck-Cardiff Centre on the Fundamentals of Heterogeneous Catalysis FUNCAT, Translational Research Hub, Cardiff University, Maindy Road, Cardiff CF24 4HQ, U.K.
8 shared publications - David John Morgan
Cardiff Catalysis Institute, School of Chemistry, Cardiff University, Park Place, Cardiff CF10 3AT, U.K.
5 shared publications - Haifeng Qi
Max Planck-Cardiff Centre on the Fundamentals of Heterogeneous Catalysis FUNCAT, Cardiff Catalysis Institute, School of Chemistry, Cardiff University, Cardiff, UK
4 shared publications - Zhiqiang Sun
Central South University
4 shared publications
Latest Publications
- Open Access
- 27 November 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 10630
Ce-induced synergistic effect in exsolved perovskite catalyst for highly efficient and robust methane dry reforming
Dry reforming of methane is an effective approach to convert two major greenhouse gases, methane and carbon dioxide, into high-value syngas, used as a feedstock for bulk and fine chemical synthesis. However, catalyst deactivation and carbon deposition under harsh conditions hinder its industrialization process. Herein, we present a Ce-modified and Ni-exsolved perovskite catalyst, 0.2Ce-La 0.97 Ni 0.4 Cr 0.6 O 3 , for achieving highly efficient and robust CH 4 -CO 2 reforming with CH 4 and CO 2 conversions of 87.4% and 92.9% at 800 °C, respectively. Moreover, this unique catalyst exhibits remarkable stability, maintaining its superior activity over 800 h. Characterization and density functional theory reveal that two Ce species are present: surface oxygen vacancy-moderate CeO 2- x (Ce surf ) and bulk lattice Ce (Ce bulk ). These play a specific role in methane dry reforming, where the Ce surf promotes CO 2 adsorption and hinders carbon deposition, while Ce bulk induces lattice strain and Ni exsolution, key factors contributing to the high activity and stability.
- 27 November 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 10630
Open AccessCe-induced synergistic effect in exsolved perovskite catalyst for highly efficient and robust methane dry reforming
Dry reforming of methane is an effective approach to convert two major greenhouse gases, methane and carbon dioxide, into high-value syngas, used as a feedstock for bulk and fine chemical synthesis. However, catalyst deactivation and carbon deposition under harsh conditions hinder its industrialization process. Herein, we present a Ce-modified and Ni-exsolved perovskite catalyst, 0.2Ce-La 0.97 Ni 0.4 Cr 0.6 O 3 , for achieving highly efficient and robust CH 4 -CO 2 reforming with CH 4 and CO 2 conversions of 87.4% and 92.9% at 800 °C, respectively. Moreover, this unique catalyst exhibits remarkable stability, maintaining its superior activity over 800 h. Characterization and density functional theory reveal that two Ce species are present: surface oxygen vacancy-moderate CeO 2- x (Ce surf ) and bulk lattice Ce (Ce bulk ). These play a specific role in methane dry reforming, where the Ce surf promotes CO 2 adsorption and hinders carbon deposition, while Ce bulk induces lattice strain and Ni exsolution, key factors contributing to the high activity and stability.
- Open Access
- 20 October 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 16 (47) , 22554-22564
Atom-by-atom assembly reveals structure–performance control in PdCu catalysts for CO 2 hydrogenation to methanol
Atomically controlled PdCu catalysts assembled directly from metal atoms on ZnO uncover how deposition order governs particle structure and activity, delivering exceptional CO 2 -tomethanol productivity and selectivity.
- 20 October 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 16 (47) , 22554-22564
Open AccessAtom-by-atom assembly reveals structure–performance control in PdCu catalysts for CO 2 hydrogenation to methanol
Atomically controlled PdCu catalysts assembled directly from metal atoms on ZnO uncover how deposition order governs particle structure and activity, delivering exceptional CO 2 -tomethanol productivity and selectivity.
- 29 September 2025
- Published by Wiley in Carbon Energy
- Vol. 7 (9)
Cover Image, Volume 7, Number 9, September 2025
- 29 September 2025
- Published by Wiley in Carbon Energy
- Vol. 7 (9)
Cover Image, Volume 7, Number 9, September 2025
- Open Access
- 9 May 2025
- Published by Wiley in Carbon Energy
Tailoring an Fe–Ov–Ce–Triggered Phase‐Reversible Oxygen Carrier for Intensified Chemical Looping CO2 Splitting
Advanced oxygen carrier plays a pivotal role in various chemical looping processes, such as CO2 splitting. However, oxygen carriers have been restricted by deactivation and inferior oxygen transferability at low temperatures. Herein, we design an Fe–Ov–Ce–triggered phase‐reversible CeO2−x·Fe·CaO ↔ CeO2·Ca2Fe2O5 oxygen carrier with strong electron‐donating ability, which activates CO2 at low temperatures and promotes oxygen transformation. Results reveal that the maximum CO2 conversion and CO yield obtained with 50 mol% CeO2−x·Fe·CaO are, respectively, 426% and 53.6 times higher than those of Fe·CaO at 700°C. This unique multiphase material also retains exceptional redox durability, with no obvious deactivation after 100 splitting cycles. The addition of Ce promotes the formation of the Fe–Ov–Ce structure, which acts as an activator, triggers CO2 splitting, and lowers the energy barrier of C═O dissociation. The metallic Fe plays a role in consuming O2−lattice transformed from Fe–Ov–Ce, whereas CaO acts as a structure promoter that enables phase‐reversible Fe0 ↔ Fe3+ looping.
- 9 May 2025
- Published by Wiley in Carbon Energy
Open AccessTailoring an Fe–Ov–Ce–Triggered Phase‐Reversible Oxygen Carrier for Intensified Chemical Looping CO2 Splitting
Advanced oxygen carrier plays a pivotal role in various chemical looping processes, such as CO2 splitting. However, oxygen carriers have been restricted by deactivation and inferior oxygen transferability at low temperatures. Herein, we design an Fe–Ov–Ce–triggered phase‐reversible CeO2−x·Fe·CaO ↔ CeO2·Ca2Fe2O5 oxygen carrier with strong electron‐donating ability, which activates CO2 at low temperatures and promotes oxygen transformation. Results reveal that the maximum CO2 conversion and CO yield obtained with 50 mol% CeO2−x·Fe·CaO are, respectively, 426% and 53.6 times higher than those of Fe·CaO at 700°C. This unique multiphase material also retains exceptional redox durability, with no obvious deactivation after 100 splitting cycles. The addition of Ce promotes the formation of the Fe–Ov–Ce structure, which acts as an activator, triggers CO2 splitting, and lowers the energy barrier of C═O dissociation. The metallic Fe plays a role in consuming O2−lattice transformed from Fe–Ov–Ce, whereas CaO acts as a structure promoter that enables phase‐reversible Fe0 ↔ Fe3+ looping.
- Top Cited PapersOpen Access
- 26 April 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-12
Concerted catalysis of single atom and nanocluster enhances bio-ethanol activation and dehydrogenation
Single atom and nanocluster catalysts are extensively investigated in heterogeneous catalysis due to their high catalytic activity and atomic utilization, while their coexisting properties and potentially synergistic effect are yet to be clarified. Herein, we construct three systems of atomic-scale catalysts (xNi/Mo2TiAlC2, x = 0.5, 1, and 1.5) for bio-ethanol reforming, which correspond to single atoms, single atoms mixed with nanoclusters, and nanoclusters. The respective hydrogen utilization efficiency of mixed-form catalyst increases by 43.7% and 29.3% compared to single atom and nanocluster catalysts. Results demonstrate that the adjacent Ni single atom facilitates electron transfer from Mo2TiAlC2 to Ni-Mo interface and raises the d-band center, thus enhancing bio-ethanol adsorption and activation; while the existence of Ni nanoclusters contributes to lowering the energy barriers of CH3CHO* dehydrogenation. The catalytically active sites are Ni-Mo alloyed single atoms with adjacent Ni nanoclusters. This work provides new implications for highly activated catalytic site construction and advanced catalyst design.
- 26 April 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-12
Top Cited PapersOpen AccessConcerted catalysis of single atom and nanocluster enhances bio-ethanol activation and dehydrogenation
Single atom and nanocluster catalysts are extensively investigated in heterogeneous catalysis due to their high catalytic activity and atomic utilization, while their coexisting properties and potentially synergistic effect are yet to be clarified. Herein, we construct three systems of atomic-scale catalysts (xNi/Mo2TiAlC2, x = 0.5, 1, and 1.5) for bio-ethanol reforming, which correspond to single atoms, single atoms mixed with nanoclusters, and nanoclusters. The respective hydrogen utilization efficiency of mixed-form catalyst increases by 43.7% and 29.3% compared to single atom and nanocluster catalysts. Results demonstrate that the adjacent Ni single atom facilitates electron transfer from Mo2TiAlC2 to Ni-Mo interface and raises the d-band center, thus enhancing bio-ethanol adsorption and activation; while the existence of Ni nanoclusters contributes to lowering the energy barriers of CH3CHO* dehydrogenation. The catalytically active sites are Ni-Mo alloyed single atoms with adjacent Ni nanoclusters. This work provides new implications for highly activated catalytic site construction and advanced catalyst design.
- Open Access
- 4 February 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 16 (11) , 4851-4859
A descriptor guiding the selection of catalyst supports for ammonia synthesis
The efforts to increase the active surface area of catalysts led to reduction of metal particle size, down to single metal atoms. This results in increasing importance of support–metal interactions. We demonstrate the mechanisms through which the support influences catalytic activity of nanoclusters: the support electronics, described by the O 2p energy level, and the support surface chemistry, determined by the density of Lewis base sites. Using Ru nanoclusters, our study shows that these parameters can be effectively captured within a single catalyst support descriptor (CSD). The apparent activation energy and turnover frequency (TOF) for the ammonia synthesis correlates strongly with CSD measured for the series Ru/MgO, Ru/Sc2O3, Ru/CeO2, Ru/La2O3, and Ru/Y2O3. Furthermore, the study demonstrates that CSD correlates linearly with the binding strength of N–Ru in nanocluster, thereby providing a direct link between the catalyst's surface chemistry and the nature of the support. The catalyst support descriptor developed in this study serves as a simple yet powerful tool for selecting the optimal support material to maximise the activity of metal nanoclusters without altering the metal itself.
- 4 February 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 16 (11) , 4851-4859
Open AccessA descriptor guiding the selection of catalyst supports for ammonia synthesis
The efforts to increase the active surface area of catalysts led to reduction of metal particle size, down to single metal atoms. This results in increasing importance of support–metal interactions. We demonstrate the mechanisms through which the support influences catalytic activity of nanoclusters: the support electronics, described by the O 2p energy level, and the support surface chemistry, determined by the density of Lewis base sites. Using Ru nanoclusters, our study shows that these parameters can be effectively captured within a single catalyst support descriptor (CSD). The apparent activation energy and turnover frequency (TOF) for the ammonia synthesis correlates strongly with CSD measured for the series Ru/MgO, Ru/Sc2O3, Ru/CeO2, Ru/La2O3, and Ru/Y2O3. Furthermore, the study demonstrates that CSD correlates linearly with the binding strength of N–Ru in nanocluster, thereby providing a direct link between the catalyst's surface chemistry and the nature of the support. The catalyst support descriptor developed in this study serves as a simple yet powerful tool for selecting the optimal support material to maximise the activity of metal nanoclusters without altering the metal itself.
- Open Access
- 24 August 2023
- Published by Springer Nature in Catalysis Letters
- Vol. 154 (4) , 1603-1610
Zn Loading Effects on the Selectivity of PdZn Catalysts for CO2 Hydrogenation to Methanol
PdZn/TiO2 catalysts have been investigated for the hydrogenation of CO2 to methanol. Varying the ratio of Pd and Zn using TiO2 as a support has a dramatic effect on catalytic performance. Chemical vapour impregnation was used to produce PdZn alloys on TiO2 and X-ray diffraction, X-ray photoelectron spectroscopy, and scanning transmission electron microscopy revealed changes in the structure at varying total PdZn molar ratios. Compared to monometallic Pd/TiO2, introducing a low loading of Zn drastically changes product selectivity. When Pd is alloyed with Zn above a total Zn/Pd = 1 molar ratio, methanol selectivity is improved. Therefore, for enhanced methanol productivity, it is crucial for the Zn loading to be higher than that required for the stoichiometric formation of the 1:1 β-PdZn alloy. Graphical Abstract
- 24 August 2023
- Published by Springer Nature in Catalysis Letters
- Vol. 154 (4) , 1603-1610
Open AccessZn Loading Effects on the Selectivity of PdZn Catalysts for CO2 Hydrogenation to Methanol
PdZn/TiO2 catalysts have been investigated for the hydrogenation of CO2 to methanol. Varying the ratio of Pd and Zn using TiO2 as a support has a dramatic effect on catalytic performance. Chemical vapour impregnation was used to produce PdZn alloys on TiO2 and X-ray diffraction, X-ray photoelectron spectroscopy, and scanning transmission electron microscopy revealed changes in the structure at varying total PdZn molar ratios. Compared to monometallic Pd/TiO2, introducing a low loading of Zn drastically changes product selectivity. When Pd is alloyed with Zn above a total Zn/Pd = 1 molar ratio, methanol selectivity is improved. Therefore, for enhanced methanol productivity, it is crucial for the Zn loading to be higher than that required for the stoichiometric formation of the 1:1 β-PdZn alloy. Graphical Abstract
- Open Access
Recent Advances on the Valorization of Glycerol into Alcohols
Glycerol, a highly functionalised polyol, can be used as a platform molecule to produce a variety of high-value chemicals. As glycerol production is projected to increase over the coming years, it’s critically important that technology and infrastructure are developed to make use of the inevitable surplus. The catalytic production of ‘green’ mono alcohols from glycerol, in the absence of H2, is an emerging area of research that, in recent years, has generated significant industrial interest. Herein, we provide an update on recent advances in this field and discuss challenges which need to be overcome if this approach is to be considered viable industrially. The economic significance of using crude glycerol as a feedstock for glycerol valorisation strategies is also addressed and suggestions for improving the impact of research conducted in this field are proposed.
Open AccessRecent Advances on the Valorization of Glycerol into Alcohols
Glycerol, a highly functionalised polyol, can be used as a platform molecule to produce a variety of high-value chemicals. As glycerol production is projected to increase over the coming years, it’s critically important that technology and infrastructure are developed to make use of the inevitable surplus. The catalytic production of ‘green’ mono alcohols from glycerol, in the absence of H2, is an emerging area of research that, in recent years, has generated significant industrial interest. Herein, we provide an update on recent advances in this field and discuss challenges which need to be overcome if this approach is to be considered viable industrially. The economic significance of using crude glycerol as a feedstock for glycerol valorisation strategies is also addressed and suggestions for improving the impact of research conducted in this field are proposed.
- Open Access
- 21 June 2022
- Published by Royal Society of Chemistry (RSC) in Faraday Discussions
- Vol. 242, 193-211
Methanol synthesis from CO2and H2using supported Pd alloy catalysts
We prepare a number of Pd based catalysts for the hydrogenation of CO2to methanol, to explore Pd alloys under reaction conditions. HRTEM and EDX maps show element distribution for the PdZn/Ga2O3catalyst.
- 21 June 2022
- Published by Royal Society of Chemistry (RSC) in Faraday Discussions
- Vol. 242, 193-211
Open AccessMethanol synthesis from CO2and H2using supported Pd alloy catalysts
We prepare a number of Pd based catalysts for the hydrogenation of CO2to methanol, to explore Pd alloys under reaction conditions. HRTEM and EDX maps show element distribution for the PdZn/Ga2O3catalyst.
- Open Access
Ambient Temperature CO Oxidation Using Palladium–Platinum Bimetallic Catalysts Supported on Tin Oxide/Alumina
A series of Pt-based catalysts were synthesised and investigated for ambient temperature CO oxidation with the aim to increase catalytic activity and improve moisture resistance through support modification. Initially, bimetallic PtPd catalysts supported on alumina were found to exhibit superior catalytic activity compared with their monometallic counterparts for the reaction. Following an investigation into the effect of Pt/Pd ratio, a composition of 0.1% Pt/0.4% Pd was selected for further studies. Following this, SnO2/Al2O3 supports were synthesised from a variety of tin oxide sources. Catalytic activity was improved using sodium stannate and tin oxalate precursors compared with a traditional tin oxide slurry. Catalytic activity versus tin concentration was found to vary significantly across the three precursors, which was subsequently investigated by X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDX).
Open AccessAmbient Temperature CO Oxidation Using Palladium–Platinum Bimetallic Catalysts Supported on Tin Oxide/Alumina
A series of Pt-based catalysts were synthesised and investigated for ambient temperature CO oxidation with the aim to increase catalytic activity and improve moisture resistance through support modification. Initially, bimetallic PtPd catalysts supported on alumina were found to exhibit superior catalytic activity compared with their monometallic counterparts for the reaction. Following an investigation into the effect of Pt/Pd ratio, a composition of 0.1% Pt/0.4% Pd was selected for further studies. Following this, SnO2/Al2O3 supports were synthesised from a variety of tin oxide sources. Catalytic activity was improved using sodium stannate and tin oxalate precursors compared with a traditional tin oxide slurry. Catalytic activity versus tin concentration was found to vary significantly across the three precursors, which was subsequently investigated by X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray spectroscopy (EDX).