YLYuan Li

Yuan Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Yuan Li has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Models of buoyancy-driven dykes using continuum plasticity or fracture mechanics: a comparison

    by Yuan Li, Timothy Davis, Adina E. Pusok, Richard F. Katz

    Magmatic dykes play an important role in the thermomechanics of tectonic rifting of the lithosphere. Our understanding of this role is limited by the lack of models that consistently capture the interaction between magmatism, including dyking, and tectonic deformation. While linear elastic fracture mechanics (LEFM) has provided a basis for understanding the mechanics of dykes, it is difficult to consistently incorporate LEFM into geodynamic models. Here we further develop a continuum theory that represents dykes as plastic tensile failure in a two-phase Stokes–Darcy model with a poro-viscoelastic–viscoplastic (poro-VEVP) rheological law (Li et al., 2023). We validate this approach by making quantitative comparison with LEFM, enabled by a novel formulation for buoyancy-driven porous dykes (poro-LEFM). The comparison shows that dykes in our continuum theory propagate slowly – a consequence of Darcian drag on the magma. Moreover, dissipation of mechanical energy in the poro-VEVP model implies a high critical stress intensity in LEFM. We improve the poro-VEVP model by reformulating the compaction stress and incorporating anisotropic permeability in regions of plastic failure.


  • Open Access

    Inefficient Melt Transport Across a Weakened Lithosphere Led to Anomalous Rift Architecture in the Turkana Depression

    by Adina E. Pusok, Yuan Li, Tim Davis, Dave A. May, Richard F. Katz

    The Turkana Depression, located between the Ethiopian and East African plateaus, displays an anomalous rift architecture. It is missing the narrow, magma‐rich morphology observed in the Main Ethiopian Rift that cuts through the Ethiopian Plateau. Instead, diffuse faulting and isolated volcanic centers are widespread over several hundred kilometers. Turkana has also experienced less magmatism over the last 30 Myr than adjacent plateaus, despite having a thin crust and residing above a mantle that is inferred to be hot and partially molten. We hypothesize that lithospheric weakening has been the key control on magma transport across the lithosphere in the Turkana Depression and subsequent rift development. Using poro‐viscoelastic–viscoplastic models of melt transport, we show that magma extraction across a thin, weakened lithosphere is slower than across a thick, elastic lithosphere. Our results suggest that pre‐rift lithospheric strength can explain the magma‐poor character of Turkana for most of its tectonic history.


  • Open Access

    Reply on RC1

    by Yuan Li, Timothy Davis, Adina E. Pusok, Richard F. Katz

    Magmatic dykes are thought to play an important role in the thermomechanics of tectonic rifting of the lithosphere. Our understanding of this role is limited by the lack of models that consistently capture the interaction between magmatism, including dyking, and tectonic deformation. While linear elastic fracture mechanics (LEFM) has provided a basis for understanding the mechanics of dykes, it is difficult to consistently incorporate LEFM into geodynamic models. Here we further develop a continuum theory that represents dykes as plastic tensile failure in a two-phase, Stokes–Darcy model with a poro- viscoelastic–viscoplastic (poro-VEVP) rheological law (Li et al., 2023). We validate this approach by making quantitative comparison with LEFM, enabled by a novel poro-LEFM formulation. The comparison shows that dykes in our continuum theory propagate slowly—a consequence of Darcian drag on the magma. Moreover, dissipation of mechanical energy in the poro-VEVP model implies a high critical stress intensity in LEFM. We improve the poro-VEVP model by reformulating the compaction stress and incorporating anisotropic permeability in regions of plastic failure.

  • Open Access

    Reply on RC2

    by Yuan Li

  • Open Access

    Comment on egusphere-2024-3504

    by Yuan Li, Timothy Davis, Adina E. Pusok, Richard F. Katz

    Magmatic dykes are thought to play an important role in the thermomechanics of tectonic rifting of the lithosphere. Our understanding of this role is limited by the lack of models that consistently capture the interaction between magmatism, including dyking, and tectonic deformation. While linear elastic fracture mechanics (LEFM) has provided a basis for understanding the mechanics of dykes, it is difficult to consistently incorporate LEFM into geodynamic models. Here we further develop a continuum theory that represents dykes as plastic tensile failure in a two-phase, Stokes–Darcy model with a poro- viscoelastic–viscoplastic (poro-VEVP) rheological law (Li et al., 2023). We validate this approach by making quantitative comparison with LEFM, enabled by a novel poro-LEFM formulation. The comparison shows that dykes in our continuum theory propagate slowly—a consequence of Darcian drag on the magma. Moreover, dissipation of mechanical energy in the poro-VEVP model implies a high critical stress intensity in LEFM. We improve the poro-VEVP model by reformulating the compaction stress and incorporating anisotropic permeability in regions of plastic failure.

  • Open Access

    Comment on egusphere-2024-3504

    by Yuan Li, Timothy Davis, Adina E. Pusok, Richard F. Katz

    Magmatic dykes are thought to play an important role in the thermomechanics of tectonic rifting of the lithosphere. Our understanding of this role is limited by the lack of models that consistently capture the interaction between magmatism, including dyking, and tectonic deformation. While linear elastic fracture mechanics (LEFM) has provided a basis for understanding the mechanics of dykes, it is difficult to consistently incorporate LEFM into geodynamic models. Here we further develop a continuum theory that represents dykes as plastic tensile failure in a two-phase, Stokes–Darcy model with a poro- viscoelastic–viscoplastic (poro-VEVP) rheological law (Li et al., 2023). We validate this approach by making quantitative comparison with LEFM, enabled by a novel poro-LEFM formulation. The comparison shows that dykes in our continuum theory propagate slowly—a consequence of Darcian drag on the magma. Moreover, dissipation of mechanical energy in the poro-VEVP model implies a high critical stress intensity in LEFM. We improve the poro-VEVP model by reformulating the compaction stress and incorporating anisotropic permeability in regions of plastic failure.

  • Open Access

    Continuum models of dykes: a comparison to discrete fracture models

    by Yuan Li, Timothy Davis, Adina Pusok, Richard Katz

    Dykes are fluid-filled fractures that transport melt within the lithosphere. Their presence impacts lithospheric stresses and hence the forces of plate tectonics. Accurate representation of dykes in geodynamic models is crucial for modelling the dynamics of rifting. Li et al. (2023) approximated dyking as plastic tensile failure in a two-phase continuum with a poro-viscoelastic—viscoplastic (poro-VEVP) rheology. Li et al. only partially validated this model approach, and hence the extent to which it approximates a natural fracture remains unclear. In this study, we extend the comparison between our continuum formulation and the widely accepted theory of Linear Elastic Fracture Mechanics (LEFM) to the case of a buoyancy-driven dyke (Roper and Lister, 2007). We achieve this through detailed consideration of the dynamics and energetics. Comparing the dynamics of the continuum and LEFM models is challenging due to their differing assumptions and the limitations of finite-difference numerical solutions. The continuum model treats the liquid phase as porous flow, while the LEFM model assumes a lubricated channel flow inside of an open fracture. A drawback of numerical computations is that the grid size can exceed the dyke width. In fact, one shortcoming of the previous computational framework is that the dyke width can grow to several grid cells, which further complicates the comparison. To overcome these challenges, we adjust both models to have the same geometry and mechanics: (1) we incorporate in the continuum model an anisotropic permeability treatment based on plastic strain components; (2) we introduce an intermediate 'poro-fracture' model that is a modified LEFM model for porous channel flow. Our results show that the poro-VEVP model converges to the LEFM poro-fracture model at a toughness value that is large relative to natural rock and at a propagation speed that is slow relative to the standard LEFM formulation. Firstly, we attribute the slow propagation speed in the continuum model to the high Darcy’s drag force, which can be improved by augmenting the permeability. Secondly, we show that plasticity in the continuum model relates quantitatively to the toughness in the fracture model. It is evidenced by the good agreement between the two models in stress field prediction and also the dyke porosity profiles when a specific toughness value is applied to the fracture model. Intriguingly, this toughness is derived from equating the total energy dissipation rate in the continuum model to the energy required to open a fracture, thereby establishing an energy-based connection between the two models.ReferencesLi, Y., Pusok, A., Davis, T., May, D., and Katz, R., (2023). Continuum approximation of dyking with a theory for poro-viscoelastic–viscoplastic deformation, Geophysical Journal International.Roper, S.M. and Lister, J.R., (2007). Buoyancy-driven crack propagation:the limit of large fracture toughness. Journal of Fluid Mechanics.

  • Open Access

    The influence of hotspot topography on mega-dyke propagation: theory and models

    by Tim Davis, Richard Katz, Adina Pusok, Yuan Li

    Radial mega-dyke swarms, found on Earth, Mars and Venus, radiate away from a central source in an asterisk-like pattern. Individual mega-dykes can reach lengths of 100s of kms and up to 100 metres in width (Ernst and Baragar, 1992), yet this similarity in the characteristic length among dykes of an individual swarm over such long distances remains enigmatic. In this study, we present theory and numerical models of dyke length. Here we hypothesise that the level of neutral buoyancy is inclined, allowing dykes to flow downslope. We postulate that the source of this inclination is crustal doming above a rising hotspot swell.Existing models of fractures perched at their level of neutral buoyancy show the final length of the fracture L is highly dependent on the initial chamber pressure p, L∝p7/2 (Bolchover and Lister, 1999). Changes in this pressure of 10’s of MPa can cause the final length of the fractures to extend between the metre scale to 1000’s of kilometres. This suggests that the chamber pressure would have to be very stable for the injection of all dykes in a given array. In our model we will show that when the dyke propagates downslope then the dyke length is less sensitive to this source pressure. In our model, the wall rock deforms elastically but breaks when the fracture toughness is exceeded. Lubrication theory is used to model the flow within the dyke and the magma is allowed to solidify on contact with the wall. We simulate the dykes using PyFrac (Zia and Lecampion, 2020) and a simplified scheme akin to a pseudo-3D hydro-fracture model (Adachi et al., 2010). We derive equations to describe the energy sources and sinks driving the dyke to propagate laterally.We show how the dyke height and speed increases as the slope of the level of neutral buoyancy is increased. Using our energy analysis, we show that for a dyke propagating down a constant slope the dissipation is balanced by the gravitational potential energy, resulting in a near constant tip speed. Retrieving the dyke tip speed from the model we estimate the final length of the dyke. We show that for dykes driven laterally by a stress gradient the final length is less sensitive to the magma chamber pressure. Our results show quantitatively how radial mega-dyke arrays are related to ground deformation above a rising hotspot head.Adachi, J.I., Detournay, E. and Peirce, A.P., 2010. Analysis of the classical pseudo-3D model for hydraulic fracture with equilibrium height growth across stress barriers. International Journal of Rock Mechanics and Mining Sciences, 47(4), pp.625-639.Bolchover, P. and Lister, J.R., 1999. The effect of solidification on fluid–driven fracture, with application to bladed dykes. Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences, 455(1987), pp.2389-2409.Ernst, R.E. and Baragar, W.R.A., 1992. Evidence from magnetic fabric for the flow pattern of magma in the Mackenzie giant radiating dyke swarm. Nature, 356(6369), pp.511-513.Zia, H. and Lecampion, B., 2020. PyFrac: A planar 3D hydraulic fracture simulator. Computer Physics Communications, 255, p.107368.

  • Open Access

    Reduced magmatism in the Turkana Depression: a consequence of inefficient melt transport

    by Adina E. Pusok, Yuan Li, Richard F. Katz, Tim Davis, Dave A. May

    Geophysical studies along the Main Ethiopian Rift and Eastern Rift in Kenya indicate that strain accommodation is dominated by magmatic intrusion rather than tectonic extension (e.g., Ebinger and Casey, 2001). However, it remains unclear how magmatic extension developed in the Turkana Depression, the low-lying, broadly rifted region separating the Ethiopian and East African plateaus. We investigate the rifting dynamics of the Turkana Depression with two-phase flow numerical models of melt transport through the ductile–brittle lithosphere. These models suggest that the pre-rift rheological structure of the lithosphere exerts a counter-intuitive control on melt extraction, which can explain the character of the Turkana region.Recent seismic imaging shows that both the Turkana Depression and the uplifted plateaus are underlain by deep-seated, hot, partially-molten, buoyant mantle that ponds below a thinned plate (Kounoudis et al., 2021). Yet, Ogden et al. (2023) estimated the Moho is 10–20 km shallower throughout the Turkana Depression (~20–25 km) than surrounding regions (~35–40 km). Here, we hypothesise that variations in lithospheric strength across the Turkana Depression and the Ethiopian Plateau have influenced magma transport across the lithosphere and rift development (Morley, 1994). Our models of melt extraction through the ductile–brittle lithosphere incorporate a new poro-viscoelastic–viscoplastic theory with a free surface (Li et al., 2023), designed and validated as a consistent means to model dykes. We initialise models with a source of partial melt in the asthenosphere and investigate how rheology of the overlying lithosphere impacts melt migration to the surface. Experiments are performed for buoyancy-driven magma transport under no tectonic extension, and for low background tectonic extension rates typical to the Turkana Depression (4 mm/yr; e.g., Knappe et al., 2020). Results indicate that both the rheology of lithosphere and extension rate control the efficiency of magma extraction. Magma transport across a thick, elastic lithosphere is more efficient than across a thin, more ductile lithosphere, and increases with extension. Our results suggest that surface volcanism in the Ethiopian Plateau is more likely to occur compared with the Turkana Depression, and at earlier times. ReferencesEbinger and Casey (2001), Geology, DOI: 10.1130/0091-7613(2001)0292.0.co;2Kounoudis et al. (2021), G-cubed, DOI: 10.1029/2021GC009782Ogden et al. (2023), EPSL, DOI: 10.1016/j.epsl.2023.118088Morley (1994), Tectonophys., DOI: 10.1016/0040- 1951(94)90170-8Knappe et al. (2020), JGR: Solid Earth, DOI: 10.1029/2019JB018469Li et al. (2023), GJI, DOI: 10.1093/gji/ggad173

  • Open Access

    Reply on CC1

    by Yuan Li, Timothy Davis, Adina E. Pusok, Richard F. Katz

    Magmatic dykes are thought to play an important role in the thermomechanics of tectonic rifting of the lithosphere. Our understanding of this role is limited by the lack of models that consistently capture the interaction between magmatism, including dyking, and tectonic deformation. While linear elastic fracture mechanics (LEFM) has provided a basis for understanding the mechanics of dykes, it is difficult to consistently incorporate LEFM into geodynamic models. Here we further develop a continuum theory that represents dykes as plastic tensile failure in a two-phase, Stokes–Darcy model with a poro- viscoelastic–viscoplastic (poro-VEVP) rheological law (Li et al., 2023). We validate this approach by making quantitative comparison with LEFM, enabled by a novel poro-LEFM formulation. The comparison shows that dykes in our continuum theory propagate slowly—a consequence of Darcian drag on the magma. Moreover, dissipation of mechanical energy in the poro-VEVP model implies a high critical stress intensity in LEFM. We improve the poro-VEVP model by reformulating the compaction stress and incorporating anisotropic permeability in regions of plastic failure.