Matthias Ohrnberger
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Matthias Ohrnberger has a total of 101 co-authors. Here are the top co-authors by number of shared publications:
- Eva Patricia Silke Eibl
Institute of Geosciences, University of Potsdam, Potsdam, Germany
13 shared publications - Nele Inken Käte Vesely
Institute of Geosciences, University of Potsdam, Potsdam, Germany
10 shared publications - Gilda Currenti
Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo, Catania, Italy
9 shared publications - Giuseppe Di Grazia
Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo, Catania, Italy
9 shared publications Mariangela Sciotto
Istituto Nazionale di Geofisica e Vulcanologia (INGV), Sezione Osservatorio Etneo, Catania, Italy
9 shared publications- Philippe Jousset
GFZ Helmholtz Centre for Geosciences, Potsdam, Germany
8 shared publications
Latest Publications
- Open Access
- 16 March 2026
- Published by Copernicus GmbH in Solid Earth
- Vol. 17 (3) , 465-484
Constraining the wavefield of volcano-seismic events on Mt. Etna, Italy through a rotational sensor and seismic array observations
Long-period (LP) events and tremor are characteristic seismic signals of active volcanoes, offering insight into underlying fluid-driven processes. However, their emergent wavefield is complex and challenging to characterise. Here we decipher the LP event and tremor wavefield composition using a seismic array combined with a rotational sensor co-located with a seismometer (6C station). This study analyses and compares directional and phase velocity estimates by processing a 25 d long dataset from a rotational sensor and an array of seven broadband stations deployed at Mt. Etna, Italy, in August–September 2019. We derive the back azimuths (BAz) of LP events and tremor from both the seismometer array and the 6C station, and we compare these estimates with a reference BAz obtained from the network locations from the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) on Mt. Etna. Volcanic tremor occurs in distinct phases with varying seismic and surface activity. Depending on the phase, either the array or the 6C method provides reliable tremor BAz estimates, agreeing well with the INGV-OE reference. We find that BAz estimates of both methods are shifted southward relative to the reference location for the LP events. We attribute the larger southward deviation observed in the 6C results to local heterogeneities which exert a stronger influence on the 6C station than on the array. Based on the array derived slownesses we infer that the tremor and LP events mainly consist of surface waves. Further, the rotational sensor recordings suggest a wavefield dominated by SH-type waves. In combination with the observed temporal evolution of the 6C phase velocity in narrow frequency bands, we infer Love-wave dominance. This study highlights the value of a rotational sensor to constrain the wavefield in a deterministic way in a complex volcanic environment.
- 16 March 2026
- Published by Copernicus GmbH in Solid Earth
- Vol. 17 (3) , 465-484
Open AccessConstraining the wavefield of volcano-seismic events on Mt. Etna, Italy through a rotational sensor and seismic array observations
Long-period (LP) events and tremor are characteristic seismic signals of active volcanoes, offering insight into underlying fluid-driven processes. However, their emergent wavefield is complex and challenging to characterise. Here we decipher the LP event and tremor wavefield composition using a seismic array combined with a rotational sensor co-located with a seismometer (6C station). This study analyses and compares directional and phase velocity estimates by processing a 25 d long dataset from a rotational sensor and an array of seven broadband stations deployed at Mt. Etna, Italy, in August–September 2019. We derive the back azimuths (BAz) of LP events and tremor from both the seismometer array and the 6C station, and we compare these estimates with a reference BAz obtained from the network locations from the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) on Mt. Etna. Volcanic tremor occurs in distinct phases with varying seismic and surface activity. Depending on the phase, either the array or the 6C method provides reliable tremor BAz estimates, agreeing well with the INGV-OE reference. We find that BAz estimates of both methods are shifted southward relative to the reference location for the LP events. We attribute the larger southward deviation observed in the 6C results to local heterogeneities which exert a stronger influence on the 6C station than on the array. Based on the array derived slownesses we infer that the tremor and LP events mainly consist of surface waves. Further, the rotational sensor recordings suggest a wavefield dominated by SH-type waves. In combination with the observed temporal evolution of the 6C phase velocity in narrow frequency bands, we infer Love-wave dominance. This study highlights the value of a rotational sensor to constrain the wavefield in a deterministic way in a complex volcanic environment.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
First insights into the 2023 Piton de la Fournaise eruption: Revealing two distinct tremor signals
Piton de la Fournaise volcano on La Réunion island is a shield volcano that showed annual eruptive behavior since 2014. Following the last eruption of this eruptive cycle in 2023, only seismic crises were detected, but no eruption occurred until the time of writing, making the analysis of the 2023 eruption especially important. The 2023 eruption of Piton de la Fournaise volcano began on 2 July with two fissure openings on the northeastern flank, followed by a third eruptive vent on the southeastern flank that lasted until 10 August. We analyze data from a temporary seismic array on the western flank within Enclos Fouqué Caldera and the permanent network from the Volcanological Observatory of Piton de la Fournaise (OVPF-IPGP) to investigate the eruption dynamics.The tremor frequency range varies slightly between the three fissure activity periods but is mostly concentrated between 0.8 and 4 Hz. Tremor amplitude and GNSS measurements at the summit crater show similar changes for the start and towards the end of the eruption as previously observed at the volcano. While the network analysis provides highly accurate locations for the three distinct fissures, we only obtain well fitting back azimuths (BAz) for specific times from the seismic array. Slowness results from the array however help distinguish the tremor signal into surface and body waves, and for certain phases even indicate the existence of two distinct tremor sources.The deviating array back azimuths that are observed for the surface waves are interpreted to be related to the medium heterogeneity within the crater region including topographic effects. Our preliminary results, combining two different methods allow the determination of two tremor signals for one fissure site that exhibit different frequency ranges and amplitudes and possibly originate from both subsurface and surface sources. We assume that surface activity is dominating the analysis, but once decreased, a weaker tremor signal at depths becomes visible.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessFirst insights into the 2023 Piton de la Fournaise eruption: Revealing two distinct tremor signals
Piton de la Fournaise volcano on La Réunion island is a shield volcano that showed annual eruptive behavior since 2014. Following the last eruption of this eruptive cycle in 2023, only seismic crises were detected, but no eruption occurred until the time of writing, making the analysis of the 2023 eruption especially important. The 2023 eruption of Piton de la Fournaise volcano began on 2 July with two fissure openings on the northeastern flank, followed by a third eruptive vent on the southeastern flank that lasted until 10 August. We analyze data from a temporary seismic array on the western flank within Enclos Fouqué Caldera and the permanent network from the Volcanological Observatory of Piton de la Fournaise (OVPF-IPGP) to investigate the eruption dynamics.The tremor frequency range varies slightly between the three fissure activity periods but is mostly concentrated between 0.8 and 4 Hz. Tremor amplitude and GNSS measurements at the summit crater show similar changes for the start and towards the end of the eruption as previously observed at the volcano. While the network analysis provides highly accurate locations for the three distinct fissures, we only obtain well fitting back azimuths (BAz) for specific times from the seismic array. Slowness results from the array however help distinguish the tremor signal into surface and body waves, and for certain phases even indicate the existence of two distinct tremor sources.The deviating array back azimuths that are observed for the surface waves are interpreted to be related to the medium heterogeneity within the crater region including topographic effects. Our preliminary results, combining two different methods allow the determination of two tremor signals for one fissure site that exhibit different frequency ranges and amplitudes and possibly originate from both subsurface and surface sources. We assume that surface activity is dominating the analysis, but once decreased, a weaker tremor signal at depths becomes visible.
- Open Access
- 14 March 2026
- Published by Copernicus GmbH
Distinguishing the wavefield of volcano-seismic events on Mt. Etna: Achieving wavefield separation combining a seismic array and a rotational sensor
Mt. Etna volcano is Europe’s most active volcano, showing pre- and co-eruptive seismic signals as tremor and long-period (LP) events. Understanding those signals contributes to hazard assessment and risk management during volcanic eruptions. In our study we examine the wavefield composition of LP events and volcanic tremor on Mt. Etna. Both are characteristic seismic signals generated by fluid-driven volcanic activity. By combining results from a seismic array and a rotational sensor co-located with a seismometer (6C station), we decipher their wavefield.For seismic data from August - September 2019 we calculate and compare directional and phase velocity estimates. Back azimuths (BAz) of LP events and tremor from the seismometer array and the 6C station are compared to reference network BAzs which are obtained from locations estimated by the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) on Mt. Etna.We observe varying seismic tremor and surface activity which we associate with different eruption phases. During these tremor phases, either the array or 6C BAz estimates agree well with the INGV-OE reference. LP event BAz directions from both methods show a southward shift in comparison with the INGV-OE reference. Local heterogeneities might cause the larger southward deviation of the 6C BAz results in comparison with the array.Array slowness results indicate that tremor and LP events were primarily composed of surface waves. Rotational sensor recordings further indicate a wavefield dominated by SH-type waves. Together with the array results, this suggests a Love-wave dominated wavefield. The combination of rotational sensors with seismic arrays significantly enhances our ability to constrain the wavefield in complex volcanic settings.
- 14 March 2026
- Published by Copernicus GmbH
Open AccessDistinguishing the wavefield of volcano-seismic events on Mt. Etna: Achieving wavefield separation combining a seismic array and a rotational sensor
Mt. Etna volcano is Europe’s most active volcano, showing pre- and co-eruptive seismic signals as tremor and long-period (LP) events. Understanding those signals contributes to hazard assessment and risk management during volcanic eruptions. In our study we examine the wavefield composition of LP events and volcanic tremor on Mt. Etna. Both are characteristic seismic signals generated by fluid-driven volcanic activity. By combining results from a seismic array and a rotational sensor co-located with a seismometer (6C station), we decipher their wavefield.For seismic data from August - September 2019 we calculate and compare directional and phase velocity estimates. Back azimuths (BAz) of LP events and tremor from the seismometer array and the 6C station are compared to reference network BAzs which are obtained from locations estimated by the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) on Mt. Etna.We observe varying seismic tremor and surface activity which we associate with different eruption phases. During these tremor phases, either the array or 6C BAz estimates agree well with the INGV-OE reference. LP event BAz directions from both methods show a southward shift in comparison with the INGV-OE reference. Local heterogeneities might cause the larger southward deviation of the 6C BAz results in comparison with the array.Array slowness results indicate that tremor and LP events were primarily composed of surface waves. Rotational sensor recordings further indicate a wavefield dominated by SH-type waves. Together with the array results, this suggests a Love-wave dominated wavefield. The combination of rotational sensors with seismic arrays significantly enhances our ability to constrain the wavefield in complex volcanic settings.
- Open Access
- 23 December 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-29
Reply on EC1
Long-period (LP) events and tremor are characteristic seismic signals of active volcanoes, offering insight into underlying fluid-driven processes. Their emergent wavefield is complex and challenging to characterise. Seismic arrays as well as a rotational sensor with a co-located seismometer (6C station) can decipher LP event and tremor wave field composition. This study aims to analyse and compare directional and phase velocity estimates by processing a 25-day long dataset from a rotational sensor and an array of seven broadband stations deployed at Mt. Etna, Italy, in August–September 2019. We derive the back azimuths (BAz) of LP events and tremor from both the seismometer array and the 6C station, and we compare these estimates with a reference BAz obtained from the network locations from the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) on Mt. Etna. Volcanic tremor occurs in distinct phases with varying seismic and surface activity. Depending on the phase, either the array or 6C method provides reliable BAz estimates, agreeing well with the INGV-OE reference. We find that BAz estimates of both methods are shifted southward relative to the reference location for the LP events. We attribute the larger southward deviation observed in the 6C results to local heterogeneities which exert a stronger influence on the 6C station than on the array. Based on the array derived slownesses we infer that the tremor and LP events mainly consist of surface waves. Further, the rotational sensor recordings suggest a wavefield dominated by SH-type waves. In combination with the observed temporal evolution of the 6C phase velocity in narrow frequency bands, we infer Love-wave dominance. This study highlights the value of a rotational sensor to constrain the wavefield in a deterministic way in a complex volcanic environment.
- 23 December 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-29
Open AccessReply on EC1
Long-period (LP) events and tremor are characteristic seismic signals of active volcanoes, offering insight into underlying fluid-driven processes. Their emergent wavefield is complex and challenging to characterise. Seismic arrays as well as a rotational sensor with a co-located seismometer (6C station) can decipher LP event and tremor wave field composition. This study aims to analyse and compare directional and phase velocity estimates by processing a 25-day long dataset from a rotational sensor and an array of seven broadband stations deployed at Mt. Etna, Italy, in August–September 2019. We derive the back azimuths (BAz) of LP events and tremor from both the seismometer array and the 6C station, and we compare these estimates with a reference BAz obtained from the network locations from the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) on Mt. Etna. Volcanic tremor occurs in distinct phases with varying seismic and surface activity. Depending on the phase, either the array or 6C method provides reliable BAz estimates, agreeing well with the INGV-OE reference. We find that BAz estimates of both methods are shifted southward relative to the reference location for the LP events. We attribute the larger southward deviation observed in the 6C results to local heterogeneities which exert a stronger influence on the 6C station than on the array. Based on the array derived slownesses we infer that the tremor and LP events mainly consist of surface waves. Further, the rotational sensor recordings suggest a wavefield dominated by SH-type waves. In combination with the observed temporal evolution of the 6C phase velocity in narrow frequency bands, we infer Love-wave dominance. This study highlights the value of a rotational sensor to constrain the wavefield in a deterministic way in a complex volcanic environment.
- Open Access
- 23 December 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-29
Reply on RC1
Long-period (LP) events and tremor are characteristic seismic signals of active volcanoes, offering insight into underlying fluid-driven processes. Their emergent wavefield is complex and challenging to characterise. Seismic arrays as well as a rotational sensor with a co-located seismometer (6C station) can decipher LP event and tremor wave field composition. This study aims to analyse and compare directional and phase velocity estimates by processing a 25-day long dataset from a rotational sensor and an array of seven broadband stations deployed at Mt. Etna, Italy, in August–September 2019. We derive the back azimuths (BAz) of LP events and tremor from both the seismometer array and the 6C station, and we compare these estimates with a reference BAz obtained from the network locations from the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) on Mt. Etna. Volcanic tremor occurs in distinct phases with varying seismic and surface activity. Depending on the phase, either the array or 6C method provides reliable BAz estimates, agreeing well with the INGV-OE reference. We find that BAz estimates of both methods are shifted southward relative to the reference location for the LP events. We attribute the larger southward deviation observed in the 6C results to local heterogeneities which exert a stronger influence on the 6C station than on the array. Based on the array derived slownesses we infer that the tremor and LP events mainly consist of surface waves. Further, the rotational sensor recordings suggest a wavefield dominated by SH-type waves. In combination with the observed temporal evolution of the 6C phase velocity in narrow frequency bands, we infer Love-wave dominance. This study highlights the value of a rotational sensor to constrain the wavefield in a deterministic way in a complex volcanic environment.
- 23 December 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-29
Open AccessReply on RC1
Long-period (LP) events and tremor are characteristic seismic signals of active volcanoes, offering insight into underlying fluid-driven processes. Their emergent wavefield is complex and challenging to characterise. Seismic arrays as well as a rotational sensor with a co-located seismometer (6C station) can decipher LP event and tremor wave field composition. This study aims to analyse and compare directional and phase velocity estimates by processing a 25-day long dataset from a rotational sensor and an array of seven broadband stations deployed at Mt. Etna, Italy, in August–September 2019. We derive the back azimuths (BAz) of LP events and tremor from both the seismometer array and the 6C station, and we compare these estimates with a reference BAz obtained from the network locations from the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) on Mt. Etna. Volcanic tremor occurs in distinct phases with varying seismic and surface activity. Depending on the phase, either the array or 6C method provides reliable BAz estimates, agreeing well with the INGV-OE reference. We find that BAz estimates of both methods are shifted southward relative to the reference location for the LP events. We attribute the larger southward deviation observed in the 6C results to local heterogeneities which exert a stronger influence on the 6C station than on the array. Based on the array derived slownesses we infer that the tremor and LP events mainly consist of surface waves. Further, the rotational sensor recordings suggest a wavefield dominated by SH-type waves. In combination with the observed temporal evolution of the 6C phase velocity in narrow frequency bands, we infer Love-wave dominance. This study highlights the value of a rotational sensor to constrain the wavefield in a deterministic way in a complex volcanic environment.
- Open Access
- 23 December 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-29
Reply on RC2
Long-period (LP) events and tremor are characteristic seismic signals of active volcanoes, offering insight into underlying fluid-driven processes. Their emergent wavefield is complex and challenging to characterise. Seismic arrays as well as a rotational sensor with a co-located seismometer (6C station) can decipher LP event and tremor wave field composition. This study aims to analyse and compare directional and phase velocity estimates by processing a 25-day long dataset from a rotational sensor and an array of seven broadband stations deployed at Mt. Etna, Italy, in August–September 2019. We derive the back azimuths (BAz) of LP events and tremor from both the seismometer array and the 6C station, and we compare these estimates with a reference BAz obtained from the network locations from the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) on Mt. Etna. Volcanic tremor occurs in distinct phases with varying seismic and surface activity. Depending on the phase, either the array or 6C method provides reliable BAz estimates, agreeing well with the INGV-OE reference. We find that BAz estimates of both methods are shifted southward relative to the reference location for the LP events. We attribute the larger southward deviation observed in the 6C results to local heterogeneities which exert a stronger influence on the 6C station than on the array. Based on the array derived slownesses we infer that the tremor and LP events mainly consist of surface waves. Further, the rotational sensor recordings suggest a wavefield dominated by SH-type waves. In combination with the observed temporal evolution of the 6C phase velocity in narrow frequency bands, we infer Love-wave dominance. This study highlights the value of a rotational sensor to constrain the wavefield in a deterministic way in a complex volcanic environment.
- 23 December 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-29
Open AccessReply on RC2
Long-period (LP) events and tremor are characteristic seismic signals of active volcanoes, offering insight into underlying fluid-driven processes. Their emergent wavefield is complex and challenging to characterise. Seismic arrays as well as a rotational sensor with a co-located seismometer (6C station) can decipher LP event and tremor wave field composition. This study aims to analyse and compare directional and phase velocity estimates by processing a 25-day long dataset from a rotational sensor and an array of seven broadband stations deployed at Mt. Etna, Italy, in August–September 2019. We derive the back azimuths (BAz) of LP events and tremor from both the seismometer array and the 6C station, and we compare these estimates with a reference BAz obtained from the network locations from the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) on Mt. Etna. Volcanic tremor occurs in distinct phases with varying seismic and surface activity. Depending on the phase, either the array or 6C method provides reliable BAz estimates, agreeing well with the INGV-OE reference. We find that BAz estimates of both methods are shifted southward relative to the reference location for the LP events. We attribute the larger southward deviation observed in the 6C results to local heterogeneities which exert a stronger influence on the 6C station than on the array. Based on the array derived slownesses we infer that the tremor and LP events mainly consist of surface waves. Further, the rotational sensor recordings suggest a wavefield dominated by SH-type waves. In combination with the observed temporal evolution of the 6C phase velocity in narrow frequency bands, we infer Love-wave dominance. This study highlights the value of a rotational sensor to constrain the wavefield in a deterministic way in a complex volcanic environment.
- Open Access
- 11 December 2025
- Published by Springer Nature in Communications Earth & Environment
- Vol. 7 (1)
Modelling of earthquake swarms suggests magmatic fluids in the upper crust beneath the Eger Rift
Earthquake swarms are enigmatic seismic phenomena that occur across diverse tectonic settings, from volcanic to intraplate regions, and are often associated with fluid migration, magmatic activity, or stress redistribution. The Northwest Bohemia/Vogtland region is a globally recognized hotspot and natural laboratory for such activity. This study examines the recent activation of an earthquake swarm in the region after a century of dormancy. By integrating high-resolution seismicity patterns and earthquake source mechanisms with models of fluid migration, we provide a detailed reconstruction of the swarm’s temporal and spatial evolution. Our seismicity modeling suggests the activation of a pre-existing fault by natural hydro-fracturing and hydro-shearing under the influence of ascending magmatic fluids, beginning with a high-pressure CO 2 -rich fluid intrusion, followed by transitions to low-pressure hydro-shearing on the fault, likely associated with CO 2 -magma mixtures. Our results emphasize the pivotal role of fluid overpressure and fault zone weakening in controlling swarm dynamics.
- 11 December 2025
- Published by Springer Nature in Communications Earth & Environment
- Vol. 7 (1)
Open AccessModelling of earthquake swarms suggests magmatic fluids in the upper crust beneath the Eger Rift
Earthquake swarms are enigmatic seismic phenomena that occur across diverse tectonic settings, from volcanic to intraplate regions, and are often associated with fluid migration, magmatic activity, or stress redistribution. The Northwest Bohemia/Vogtland region is a globally recognized hotspot and natural laboratory for such activity. This study examines the recent activation of an earthquake swarm in the region after a century of dormancy. By integrating high-resolution seismicity patterns and earthquake source mechanisms with models of fluid migration, we provide a detailed reconstruction of the swarm’s temporal and spatial evolution. Our seismicity modeling suggests the activation of a pre-existing fault by natural hydro-fracturing and hydro-shearing under the influence of ascending magmatic fluids, beginning with a high-pressure CO 2 -rich fluid intrusion, followed by transitions to low-pressure hydro-shearing on the fault, likely associated with CO 2 -magma mixtures. Our results emphasize the pivotal role of fluid overpressure and fault zone weakening in controlling swarm dynamics.
- Open Access
- 6 November 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-29
Comment on egusphere-2025-4412
Long-period (LP) events and tremor are characteristic seismic signals of active volcanoes, offering insight into underlying fluid-driven processes. Their emergent wavefield is complex and challenging to characterise. Seismic arrays as well as a rotational sensor with a co-located seismometer (6C station) can decipher LP event and tremor wave field composition. This study aims to analyse and compare directional and phase velocity estimates by processing a 25-day long dataset from a rotational sensor and an array of seven broadband stations deployed at Mt. Etna, Italy, in August–September 2019. We derive the back azimuths (BAz) of LP events and tremor from both the seismometer array and the 6C station, and we compare these estimates with a reference BAz obtained from the network locations from the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) on Mt. Etna. Volcanic tremor occurs in distinct phases with varying seismic and surface activity. Depending on the phase, either the array or 6C method provides reliable BAz estimates, agreeing well with the INGV-OE reference. We find that BAz estimates of both methods are shifted southward relative to the reference location for the LP events. We attribute the larger southward deviation observed in the 6C results to local heterogeneities which exert a stronger influence on the 6C station than on the array. Based on the array derived slownesses we infer that the tremor and LP events mainly consist of surface waves. Further, the rotational sensor recordings suggest a wavefield dominated by SH-type waves. In combination with the observed temporal evolution of the 6C phase velocity in narrow frequency bands, we infer Love-wave dominance. This study highlights the value of a rotational sensor to constrain the wavefield in a deterministic way in a complex volcanic environment.
- 6 November 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-29
Open AccessComment on egusphere-2025-4412
Long-period (LP) events and tremor are characteristic seismic signals of active volcanoes, offering insight into underlying fluid-driven processes. Their emergent wavefield is complex and challenging to characterise. Seismic arrays as well as a rotational sensor with a co-located seismometer (6C station) can decipher LP event and tremor wave field composition. This study aims to analyse and compare directional and phase velocity estimates by processing a 25-day long dataset from a rotational sensor and an array of seven broadband stations deployed at Mt. Etna, Italy, in August–September 2019. We derive the back azimuths (BAz) of LP events and tremor from both the seismometer array and the 6C station, and we compare these estimates with a reference BAz obtained from the network locations from the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) on Mt. Etna. Volcanic tremor occurs in distinct phases with varying seismic and surface activity. Depending on the phase, either the array or 6C method provides reliable BAz estimates, agreeing well with the INGV-OE reference. We find that BAz estimates of both methods are shifted southward relative to the reference location for the LP events. We attribute the larger southward deviation observed in the 6C results to local heterogeneities which exert a stronger influence on the 6C station than on the array. Based on the array derived slownesses we infer that the tremor and LP events mainly consist of surface waves. Further, the rotational sensor recordings suggest a wavefield dominated by SH-type waves. In combination with the observed temporal evolution of the 6C phase velocity in narrow frequency bands, we infer Love-wave dominance. This study highlights the value of a rotational sensor to constrain the wavefield in a deterministic way in a complex volcanic environment.
- Open Access
- 26 October 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-29
Comment on egusphere-2025-4412
Long-period (LP) events and tremor are characteristic seismic signals of active volcanoes, offering insight into underlying fluid-driven processes. Their emergent wavefield is complex and challenging to characterise. Seismic arrays as well as a rotational sensor with a co-located seismometer (6C station) can decipher LP event and tremor wave field composition. This study aims to analyse and compare directional and phase velocity estimates by processing a 25-day long dataset from a rotational sensor and an array of seven broadband stations deployed at Mt. Etna, Italy, in August–September 2019. We derive the back azimuths (BAz) of LP events and tremor from both the seismometer array and the 6C station, and we compare these estimates with a reference BAz obtained from the network locations from the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) on Mt. Etna. Volcanic tremor occurs in distinct phases with varying seismic and surface activity. Depending on the phase, either the array or 6C method provides reliable BAz estimates, agreeing well with the INGV-OE reference. We find that BAz estimates of both methods are shifted southward relative to the reference location for the LP events. We attribute the larger southward deviation observed in the 6C results to local heterogeneities which exert a stronger influence on the 6C station than on the array. Based on the array derived slownesses we infer that the tremor and LP events mainly consist of surface waves. Further, the rotational sensor recordings suggest a wavefield dominated by SH-type waves. In combination with the observed temporal evolution of the 6C phase velocity in narrow frequency bands, we infer Love-wave dominance. This study highlights the value of a rotational sensor to constrain the wavefield in a deterministic way in a complex volcanic environment.
- 26 October 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-29
Open AccessComment on egusphere-2025-4412
Long-period (LP) events and tremor are characteristic seismic signals of active volcanoes, offering insight into underlying fluid-driven processes. Their emergent wavefield is complex and challenging to characterise. Seismic arrays as well as a rotational sensor with a co-located seismometer (6C station) can decipher LP event and tremor wave field composition. This study aims to analyse and compare directional and phase velocity estimates by processing a 25-day long dataset from a rotational sensor and an array of seven broadband stations deployed at Mt. Etna, Italy, in August–September 2019. We derive the back azimuths (BAz) of LP events and tremor from both the seismometer array and the 6C station, and we compare these estimates with a reference BAz obtained from the network locations from the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) on Mt. Etna. Volcanic tremor occurs in distinct phases with varying seismic and surface activity. Depending on the phase, either the array or 6C method provides reliable BAz estimates, agreeing well with the INGV-OE reference. We find that BAz estimates of both methods are shifted southward relative to the reference location for the LP events. We attribute the larger southward deviation observed in the 6C results to local heterogeneities which exert a stronger influence on the 6C station than on the array. Based on the array derived slownesses we infer that the tremor and LP events mainly consist of surface waves. Further, the rotational sensor recordings suggest a wavefield dominated by SH-type waves. In combination with the observed temporal evolution of the 6C phase velocity in narrow frequency bands, we infer Love-wave dominance. This study highlights the value of a rotational sensor to constrain the wavefield in a deterministic way in a complex volcanic environment.
- Open Access
- 24 September 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-29
Constraining the wavefield of volcano-seismic events on Mt. Etna, Italy through rotational sensor and array observations
Long-period (LP) events and tremor are characteristic seismic signals of active volcanoes, offering insight into underlying fluid-driven processes. Their emergent wavefield is complex and challenging to characterise. Seismic arrays as well as a rotational sensor with a co-located seismometer (6C station) can decipher LP event and tremor wave field composition. This study aims to analyse and compare directional and phase velocity estimates by processing a 25-day long dataset from a rotational sensor and an array of seven broadband stations deployed at Mt. Etna, Italy, in August–September 2019. We derive the back azimuths (BAz) of LP events and tremor from both the seismometer array and the 6C station, and we compare these estimates with a reference BAz obtained from the network locations from the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) on Mt. Etna. Volcanic tremor occurs in distinct phases with varying seismic and surface activity. Depending on the phase, either the array or 6C method provides reliable BAz estimates, agreeing well with the INGV-OE reference. We find that BAz estimates of both methods are shifted southward relative to the reference location for the LP events. We attribute the larger southward deviation observed in the 6C results to local heterogeneities which exert a stronger influence on the 6C station than on the array. Based on the array derived slownesses we infer that the tremor and LP events mainly consist of surface waves. Further, the rotational sensor recordings suggest a wavefield dominated by SH-type waves. In combination with the observed temporal evolution of the 6C phase velocity in narrow frequency bands, we infer Love-wave dominance. This study highlights the value of a rotational sensor to constrain the wavefield in a deterministic way in a complex volcanic environment.
- 24 September 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-29
Open AccessConstraining the wavefield of volcano-seismic events on Mt. Etna, Italy through rotational sensor and array observations
Long-period (LP) events and tremor are characteristic seismic signals of active volcanoes, offering insight into underlying fluid-driven processes. Their emergent wavefield is complex and challenging to characterise. Seismic arrays as well as a rotational sensor with a co-located seismometer (6C station) can decipher LP event and tremor wave field composition. This study aims to analyse and compare directional and phase velocity estimates by processing a 25-day long dataset from a rotational sensor and an array of seven broadband stations deployed at Mt. Etna, Italy, in August–September 2019. We derive the back azimuths (BAz) of LP events and tremor from both the seismometer array and the 6C station, and we compare these estimates with a reference BAz obtained from the network locations from the Istituto Nazionale di Geofisica e Vulcanologia-Osservatorio Etneo (INGV-OE) on Mt. Etna. Volcanic tremor occurs in distinct phases with varying seismic and surface activity. Depending on the phase, either the array or 6C method provides reliable BAz estimates, agreeing well with the INGV-OE reference. We find that BAz estimates of both methods are shifted southward relative to the reference location for the LP events. We attribute the larger southward deviation observed in the 6C results to local heterogeneities which exert a stronger influence on the 6C station than on the array. Based on the array derived slownesses we infer that the tremor and LP events mainly consist of surface waves. Further, the rotational sensor recordings suggest a wavefield dominated by SH-type waves. In combination with the observed temporal evolution of the 6C phase velocity in narrow frequency bands, we infer Love-wave dominance. This study highlights the value of a rotational sensor to constrain the wavefield in a deterministic way in a complex volcanic environment.