DPDaniel Pacheco

Daniel Pacheco

*This is an algorithmically generated author record based on publicly available information.

Daniel Pacheco has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Study of the seismic response of the Quito basin

    by Daniel Pacheco

    Étude de la réponse sismique du bassin de Quito: La ville de Quito, capitale de l’Équateur est située dans une vallée andine à 2800 mètres d’altitude entourée de volcans. Cette ville qui accueille environ 2 millions d’habitant est sujette à l’occurrence de séismes importants. Elle est de plus particulièrement vulnérable puisqu’aucun code parasismique n’est pour le moment utilisé pour les constructions. L’étude de l’aléa et du risque sismique y est donc primordiale. Trois type de séismes menacent la ville : un séisme proche de magnitude modérée (M~6.5) qui aurait lieu sur le réseau de faille de Quito, un séisme plus lointain qui pourrait avoir une magnitude plus élevée (M~7.5) venant de la cordillère et enfin un séisme de subduction venant de la côte à plus de 170 km de distance, dont la magnitude pourrait très élevée (M> 8.5). C’est ce troisième type de séisme qui a frappé l’Équateur le 16 avril 2016 (séisme de Pedernales, Mw 7.8). Ce séisme a causé des dégâts très importants sur la côte et plusieurs centaines de victimes. Il a fait trembler également la ville de Quito mais n’a causé aucun dommage. Qu’en serait-il pour un séisme plus fort ? Est-ce que l’effet d’amplification des ondes sismiques dû au bassin sédimentaire de Quito pourrait, comme cela a été le cas en 1985 dans le bassin de Mexico, engendrer des valeurs de mouvement du sol très fortes causant des dégâts importants ? Est-ce que des séismes de plus faible magnitude mais plus proches pourraient menacer la ville de façon plus importante ? Ces questions scientifiques sont au cœur des préoccupations de ce sujet de thèse, qui est lui-même inclus dans un grand projet d’étude de la zone Équateur-Chili mené conjointement par l’Institut de Géophysique de Quito, et des chercheurs Français des laboratoires Géoazur, ISTerre, CEREMA et IFSTTAR. Objectifs de la thèse : Comprendre, caractériser et simuler les mouvements du sol dans la ville de Quito, en prenant en compte les effets de résonance du bassin (i.e. topographie de la base du bassin, remplissage alluvionnaire), ainsi que ceux dus à la forte topographie environnante. Réaliser des simulations de séismes futurs probables. Données disponibles (non encore exploitées): Enregistrements du bruit de fond par 20 stations large-bande dans et autour du bassin pendant 6 mois (la campagne de mesure sera menée de juillet à décembre 2017. Enregistrements de petits séismes sur le réseau accélérométrique de Quito (RENAQ) depuis 2010 Enregistrements du séisme de Pedernales et de ses principales répliques sur le réseau RENAQ Méthodologie : Corrélation de bruit de fond pour estimer des fonctions de Green inter-stations, en s’appuyant sur les données géologiques et géotechniques existantes. Autres techniques d’inversion (e.g. fonctions récepteur, étude d'ondes converties sur l'interface sédiments/socle) envisagées en fonction de la qualité des fonctions de Green estimées. Simulation basse fréquence en utilisant les fonctions de Green obtenues par intercorrélation du bruit Simulations haute fréquence par méthode hybrides utilisant des fonctions de Green empiriques (c’est-à-dire les enregistrements de petits séismes).

  • Open Access

    Long, episodic awakening of volcanoes: The case of Chiles-Potrerillos, Ecuador

    by Patricia Mothes, Marco Yepez, Andrea Cordova, Daniel Pacheco, Marco Almeida, Daniel Sierra, Edwin Telenchana, Silvana Hidalgo, Mario Ruiz, Pedro Espin

    Volcanoes that have been dormant for tens of thousands of years often have a long warm-up time before eruption onset. Magma and fluid migration are obstructed by closed fractures at depth, a sealed hydrothermal lens, and conduit blockage, all of which work against magma emplacement. Our first significant activity at Chiles-Potrerillos was a Mw 5.5 earthquake, followed by an intense seismic swarm in October 2014. Uplift occurred, perhaps in concert with movement on local faults. Subsequently, lulls in activity and little deformation or changes in the hydrothermal springs assuaged our concerns. Then, more seismic swarms registered in 2018-19, 2022-24, and in late 2025. Commonly, 2000-4000 VT events are registered each day. Overall seismic production is ~1.5 million events. While most events are VTs and are less than Mw= 1, numerous events fall into the 3-4 Mw category and are felt. Deformation detected by GPS and InSAR (Sentinel-1 and TerraSAR-X) exceeds 40 mm/yr and now involves the southern flank of Chiles volcano, as well as a rectangular zone 20 km to the SE, called Potrerillos, where several domes are located. Overall, and significantly, the deformation has presented strong, then lower rates of uplift, but values are rarely negative. Surface manifestations at hot springs have remained unchanged over the past 12 years. While we believe that magma is probably stressing the system, the seals of the hydrothermal system remain intact, which impedes the onset of explosions, strong exsolution of magmatic gases, and overall increased heat flow. We anticipate that before an eruption onset, deformation will become more abrupt and concentrated, with or without increased seismicity, since much of the country rock is already fractured.

  • Open Access

    2. Los estudios de peligros geológicos en Quito desde la década de los ochenta

    by S. Daniel Andrade, Eliana Jiménez Álvaro, Pablo Samaniego, Daniel Pacheco, Alexandra Alvarado

    La presente revisión se centra en los avances que se han realizado en los estudios relacionados con la evaluación de los peligros geológicos en la ciudad de Quito y estará enfocada a los últimos 40 años de investigacio­nes. En efecto, entre las décadas de los sesenta y setenta, las ciencias geológicas adoptaron, de manera unánime, un marco teórico global conocido como Tectónica de Placas (McKenzie y Parker 1967; Morgan 1968; Le Pichon 1968; Wilson 1976), el cual serv

  • A simple and general methodology to calibrate seismic instruments for debris flow quantification: application to Cotopaxi and Tungurahua volcanoes (Ecuador)

    by S. Daniel Andrade, Stefanie Almeida, Emilia Saltos, Daniel Pacheco, Stephen Hernandez, Wilson Acero


  • Profiling the Quito basin (Ecuador) using seismic ambient noise

    by D Pacheco, E D Mercerat, F Courboulex, L F Bonilla, A Laurendeau, A Alvarado

    Quito, the capital of Ecuador, with more than 2.5 M inhabitants, is exposed to a high seismic hazard due to its proximity to the Pacific subduction zone and active crustal faults, both capable of generating significant earthquakes. Furthermore, the city is located in an intermontane piggy-back basin prone to seismic wave amplification. To understand the basin’s seismic response and characterize its geological structure, 20 broad and medium frequency band seismic stations were deployed in Quito’s urban area between May 2016 and July 2018 that continuously recorded ambient seismic noise. We first compute horizontal-to-vertical spectral ratios to determine the resonant frequency distribution in the entire basin. Secondly, we cross-correlate seismic stations operating simultaneously to retrieve interstations surface-wave Green’s functions in the frequency range of 0.1–2 Hz. We find that Love waves travelling in the basin’s longitudinal direction (NNE–SSW) show much clearer correlograms than those from Rayleigh waves. We then compute Love wave phase-velocity dispersion curves and invert them in conjunction with the HVSR curves to obtain shear-wave velocity profiles throughout the city. The inversions highlight a clear difference in the basin’s structure between its northern and southern parts. In the centre and northern areas, the estimated basin depth and mean shear-wave velocity are about 200 m and 1800 ms−1, respectively, showing resonance frequency values between 0.6 and 0.7 Hz. On the contrary, the basement’s depth and shear-wave velocity in the southern part are about 900 m and 2500 ms−1, having a low resonance frequency value of around 0.3 Hz. This difference in structure between the centre-north and the south of the basin explains the spatial distribution of low-frequency seismic amplifications observed during the Mw 7.8 Pedernales earthquake in April 2016 in Quito.


  • Open Access

    Seismic Imaging Using Auto- and Cross-correlation of seismic noise in the Quito (Ecuador) basin

    by Daniel Pacheco, Diego Mercerat, Françoise Courboulex, Fabián Bonilla, Aurore Laurendeau, Alexandra Alvarado

    Temporary seismic networks installed in urban areas provide a powerful tool for investigating shallow geological structures and assessing the seismic hazard using passive seismic methods, including auto- and cross-correlation of seismic noise. To examine the feasibility of the methods to image the uppermost geological structures, 20 broad- and mid-band seismological stations were deployed progressively throughout Quito in an irregular array to record ambient seismic noise between May 2016 and July 2018.Quito, the capital of Ecuador, is located in a high seismic zone, 180 km from the Pacific subduction zone and surrounded by crustal-faults prone to generate significant earthquakes. The city is built on a sedimentary basin, located on the hanging wall of a system of active reverse faults. The high population density (around 2.5 million inhabitants) and the lack of planning of most of its buildings, make Quito a metropolis exposed to high seismic risk. In Quito, the basin's filling has been described as volcano-sedimentary sequences consisting of lavas, lahars, lacustrine, and pyroclastic deposits (Alvarado et al., 2014). However, the thickness of the in-fill material, its spatial arrangement, and the basin's deep structure remain poorly known. This study presents the results of ambient noise auto- and cross-correlation of simultaneous operating seismic stations to retrieve: 1)  zero-offset high frequency body-wave crustal reflections, and 2) inter-station, surface-wave Green's functions in the frequency band 0.1 - 2 Hz. Auto-correlation of seismic noise indicated at least one reflection within the first 2.5 s from the surface. Careful analyses of day-night variations in noise spectral power were carried out to select optimal time windows for the cross-correlation. Additionally, Rayleigh and Love phase-velocity dispersion curves were inverted to obtain shear wave velocity profiles throughout the city. Love wave trains traveling in the longitudinal direction of the basin (NNE-SSW) are much clearer than Rayleigh wave trains.The surface-wave Green’s functions and their inversions suggest a clear difference in the basin's structure between the northern and southern parts. In the north, we detect the seismic basement at a depth of about 300 meters, whereas in the south, it appears much deeper at around 1000 meters. This significant difference could be the main explanation for the low-frequency amplification (at 0.3 Hz) highlighted in the southern part of the basin from earthquake recordings (e.g., the Mw 7.8 Pedernales earthquake on April 2016) and by the analysis of spectral ratios (Laurendeau et al., 2017).References: Alvarado, A., et al. (2014). Active tectonics in Quito, Ecuador, assessed by geomorphological studies, GPS data, and crustal seismicity, DOI: 10.1002/2012TC003224. Laurendeau, A., et al. (2017). Low-frequency seismic amplification in the Quito basin (Ecuador) revealed by accelerometric recordings of the RENAC network, DOI: 10.1785/0120170134.