Max Koch
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Max Koch has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Robert Mettin
Drittes Physikalisches Institut, Universität, Göttingen, Friedrich-Hund-Platz 1, 37077 Göttingen, Germany
6 shared publications - Christiane Lechner
Institute of Fluid Mechanics and Heat Transfer, TU Wien, Getreidemarkt 9, 1060 Vienna, Austria
5 shared publications - Juan Manuel Rosselló
Faculty of Mechanical Engineering, University of Ljubljana, As̆kerc̆eva 6, 1000 Ljubljana, Slovenia
3 shared publications Julian Eisener
Institut für Physik (IfP), Otto-von-Guericke-Universität Magdeburg, Magdeburg, Germany
2 shared publicationsWerner Lauterborn
Drittes Physikalisches Institut, Georg-August Universität Göttingen, Göttingen, Germany
2 shared publications- Werner Lauterborn
Drittes Physikalisches Institut, Universität, Göttingen, Friedrich-Hund-Platz 1, 37077 Göttingen, Germany
2 shared publications
Latest Publications
- 1 October 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (10)
Bubble dynamics on top of protruding objects observed with x-ray phase-contrast high-speed imaging
This study presents a comprehensive, qualitative investigation of the complex dynamics of laser-induced cavitation bubbles near rigid, protruding objects with various cross-sectional geometries. We employ a threefold approach that combines synchronized optical videography, high-speed x-ray phase-contrast imaging (at MHz frame rates), and three-dimensional compressible multiphase flow simulations. While conventional optical high-speed imaging is often limited by refraction, which obscures the bubble interior, synchrotron x-ray radiation enables unprecedented visualization of internal structures, including secondary cavitation, splashing, and jetting dynamics. Four distinct geometries are investigated: a cylindrical pillar, a cone, a vertical blade, and a three-point star column. We identify several universal qualitative features of bubbles generated above both axisymmetric and anisotropic columns over normalized stand-off distances D∗ in the range [0.047, 0.79] and normalized object widths β in the range [0.251, 0.893], including configurations where the bubble is generated off-center relative to the column. Results show a clear correlation between bubble dynamics and a specific cross-sectional geometry. Furthermore, effects of small-scale features of the object surfaces, such as roughness and sharpness of edges, can occur. These can play a role in apparent pinning of the gas–liquid interface, flow detachment and vortex formation, and secondary cavitation. The combined experimental–numerical framework allows for precise determination of bubble parameters and provides validation of three-dimensional simulations, demonstrating that geometric asymmetries significantly influence jet formation compared with fully axisymmetric configurations.
- 1 October 2026
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (10)
Bubble dynamics on top of protruding objects observed with x-ray phase-contrast high-speed imaging
This study presents a comprehensive, qualitative investigation of the complex dynamics of laser-induced cavitation bubbles near rigid, protruding objects with various cross-sectional geometries. We employ a threefold approach that combines synchronized optical videography, high-speed x-ray phase-contrast imaging (at MHz frame rates), and three-dimensional compressible multiphase flow simulations. While conventional optical high-speed imaging is often limited by refraction, which obscures the bubble interior, synchrotron x-ray radiation enables unprecedented visualization of internal structures, including secondary cavitation, splashing, and jetting dynamics. Four distinct geometries are investigated: a cylindrical pillar, a cone, a vertical blade, and a three-point star column. We identify several universal qualitative features of bubbles generated above both axisymmetric and anisotropic columns over normalized stand-off distances D∗ in the range [0.047, 0.79] and normalized object widths β in the range [0.251, 0.893], including configurations where the bubble is generated off-center relative to the column. Results show a clear correlation between bubble dynamics and a specific cross-sectional geometry. Furthermore, effects of small-scale features of the object surfaces, such as roughness and sharpness of edges, can occur. These can play a role in apparent pinning of the gas–liquid interface, flow detachment and vortex formation, and secondary cavitation. The combined experimental–numerical framework allows for precise determination of bubble parameters and provides validation of three-dimensional simulations, demonstrating that geometric asymmetries significantly influence jet formation compared with fully axisymmetric configurations.
- 1 March 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (3)
On the popping sound and liquid sloshing when opening a beer bottle
The opening of transparent 0.33 l swing-top bottles, containing home-brewed ginger beer under 2–5 bars of pressure, was recorded with a high-speed camera at frame rates between 3000 fps and 16 800 fps. Simultaneously, the sound was registered with a microphone of a nominal frequency range up to 100 kHz and a sampling rate between 200 and 500 kS/s. The exhaust condensation cloud could be captured, and the main source of the popping sound, the resonating gas pocket in the bottleneck, was identified by image and sound recordings. It is shown that the sound is actually tonal rather than shock-like. Since the bottles were transparent, the interior fluid flows with sloshing and bubble nucleation were visible as well. The videos, acoustic traces, and spectra are compared to computational fluid dynamics simulations using a solver for two-phase, compressible flow from the OpenFOAM package, yielding detailed explanations on the phenomena involved. Simple resonator models can fairly reproduce the observed frequencies if adiabatic expansion cooling of the gas is taken into account.
- 1 March 2025
- Published by AIP Publishing in Physics of Fluids
- Vol. 37 (3)
On the popping sound and liquid sloshing when opening a beer bottle
The opening of transparent 0.33 l swing-top bottles, containing home-brewed ginger beer under 2–5 bars of pressure, was recorded with a high-speed camera at frame rates between 3000 fps and 16 800 fps. Simultaneously, the sound was registered with a microphone of a nominal frequency range up to 100 kHz and a sampling rate between 200 and 500 kS/s. The exhaust condensation cloud could be captured, and the main source of the popping sound, the resonating gas pocket in the bottleneck, was identified by image and sound recordings. It is shown that the sound is actually tonal rather than shock-like. Since the bottles were transparent, the interior fluid flows with sloshing and bubble nucleation were visible as well. The videos, acoustic traces, and spectra are compared to computational fluid dynamics simulations using a solver for two-phase, compressible flow from the OpenFOAM package, yielding detailed explanations on the phenomena involved. Simple resonator models can fairly reproduce the observed frequencies if adiabatic expansion cooling of the gas is taken into account.
- Open Access
Ring Vortex Dynamics Following Jet Formation of a Bubble Expanding and Collapsing Close to a Flat Solid Boundary Visualized via Dye Advection in the Framework of OpenFOAM
A bubble expanding and collapsing near a solid boundary develops a liquid jet toward the boundary. The jet leaves a torus bubble and induces vortices in the liquid that persist long after the bubble oscillations have ceased. The vortices are studied numerically in axial symmetry and compared to experiments in the literature. The flow field is visualized with different methods: vorticity with superimposed flow-direction arrows for maps at a time instant and colored-liquid-layer flow-field maps (dye advection) for following the complete long-term fluid flow up to a chosen time since bubble generation. Bubbles with equal energy—maximum radius in a free liquid = 500 µm—are studied for different distances from the solid boundary. The interval of normalized distances = / from 0.4 to 1.8 is covered. Two types of vortices were reported in experiments, one moving toward the solid boundary and one moving away from it. This finding is reproduced numerically with higher resolution of the flow field and in more detail. The higher detail reveals that the two types of vortices have different rotation directions and coexist with individually varying vorticity amplitude throughout the interval studied. In a quite narrow part of the interval, the two types change their strength and extent with the result of a reversal of the dominating rotational direction of the fluid flow. Thereby, the experimentally found transition interval could be reproduced and refined. It is interesting to note that in the vortex transition interval, the erosion of a solid surface is strongly augmented.Open AccessRing Vortex Dynamics Following Jet Formation of a Bubble Expanding and Collapsing Close to a Flat Solid Boundary Visualized via Dye Advection in the Framework of OpenFOAM
A bubble expanding and collapsing near a solid boundary develops a liquid jet toward the boundary. The jet leaves a torus bubble and induces vortices in the liquid that persist long after the bubble oscillations have ceased. The vortices are studied numerically in axial symmetry and compared to experiments in the literature. The flow field is visualized with different methods: vorticity with superimposed flow-direction arrows for maps at a time instant and colored-liquid-layer flow-field maps (dye advection) for following the complete long-term fluid flow up to a chosen time since bubble generation. Bubbles with equal energy—maximum radius in a free liquid = 500 µm—are studied for different distances from the solid boundary. The interval of normalized distances = / from 0.4 to 1.8 is covered. Two types of vortices were reported in experiments, one moving toward the solid boundary and one moving away from it. This finding is reproduced numerically with higher resolution of the flow field and in more detail. The higher detail reveals that the two types of vortices have different rotation directions and coexist with individually varying vorticity amplitude throughout the interval studied. In a quite narrow part of the interval, the two types change their strength and extent with the result of a reversal of the dominating rotational direction of the fluid flow. Thereby, the experimentally found transition interval could be reproduced and refined. It is interesting to note that in the vortex transition interval, the erosion of a solid surface is strongly augmented. - Open Access
Dynamics of a Laser-Induced Bubble above the Flat Top of a Solid Cylinder—Mushroom-Shaped Bubbles and the Fast Jet
The dynamics of a laser-induced bubble on top of a solid cylinder is studied both experimentally and numerically. When the bubble is generated close to the flat top along the axis of the cylinder and its maximum radius exceeds the one of the flat top surface, it collapses in the form of a mushroom with a footing on the cylinder, a long stem and a hat-like cap typical for a mushroom head. The head may collapse forming a thin, fast liquid jet into the stem, depending on bubble size and bubble distance to the top of the cylinder. Several experimental and numerical examples are given. The results represent a contribution to understand the behavior of bubbles collapsing close to structured surfaces and in particular, how thin, fast jets are generated.
Open AccessDynamics of a Laser-Induced Bubble above the Flat Top of a Solid Cylinder—Mushroom-Shaped Bubbles and the Fast Jet
The dynamics of a laser-induced bubble on top of a solid cylinder is studied both experimentally and numerically. When the bubble is generated close to the flat top along the axis of the cylinder and its maximum radius exceeds the one of the flat top surface, it collapses in the form of a mushroom with a footing on the cylinder, a long stem and a hat-like cap typical for a mushroom head. The head may collapse forming a thin, fast liquid jet into the stem, depending on bubble size and bubble distance to the top of the cylinder. Several experimental and numerical examples are given. The results represent a contribution to understand the behavior of bubbles collapsing close to structured surfaces and in particular, how thin, fast jets are generated.
- Open Access
- 4 March 2021
- Published by Springer Nature in Experiments in Fluids
- Vol. 62 (3) , 1-19
Theory-assisted optical ray tracing to extract cavitation-bubble shapes from experiment
Experimental analysis of cavitation bubble dynamics typically uses optical imaging and photographic recording. However, the images are often severely affected by distortions and shadows due to refraction and total reflection of the illuminating light at the liquid–gas interface of the bubble. Optical ray tracing may become a powerful tool for the analysis process by assisting in the comparison of experiments to numerical two-phase flow simulations. The novelty of the present approach consists in digitizing almost the complete experimental arrangement with all its optically relevant elements and objects—including a numerical model of the yet unknown bubble—and numerically photographing the scene via ray tracing. The method is applied to the jetting dynamics of single bubbles collapsing at a solid wall. Here, ray tracing can help in the interpretation of raw experimental data concerning the complex bubble interface deformations and internal structures during the collapse. The precise shape of the highly dynamical bubbles can be inferred, thus ray tracing provides a correction method for velocity values of the liquid jets. Strong evidence is found for the existence of an ultra-short-time, fast jet, exceeding velocities known to date in the field.Graphic abstract
- 4 March 2021
- Published by Springer Nature in Experiments in Fluids
- Vol. 62 (3) , 1-19
Open AccessTheory-assisted optical ray tracing to extract cavitation-bubble shapes from experiment
Experimental analysis of cavitation bubble dynamics typically uses optical imaging and photographic recording. However, the images are often severely affected by distortions and shadows due to refraction and total reflection of the illuminating light at the liquid–gas interface of the bubble. Optical ray tracing may become a powerful tool for the analysis process by assisting in the comparison of experiments to numerical two-phase flow simulations. The novelty of the present approach consists in digitizing almost the complete experimental arrangement with all its optically relevant elements and objects—including a numerical model of the yet unknown bubble—and numerically photographing the scene via ray tracing. The method is applied to the jetting dynamics of single bubbles collapsing at a solid wall. Here, ray tracing can help in the interpretation of raw experimental data concerning the complex bubble interface deformations and internal structures during the collapse. The precise shape of the highly dynamical bubbles can be inferred, thus ray tracing provides a correction method for velocity values of the liquid jets. Strong evidence is found for the existence of an ultra-short-time, fast jet, exceeding velocities known to date in the field.Graphic abstract
- Open Access
Realistic prediction and analysis of cavitation bubble dynamics via optical ray-tracing of the corresponding numerical simulations
Experimental analysis of cavitation bubble dynamics typically uses optical imaging. However, images are often severely affected by distortions and shadows due to refraction and total reflection at the liquid--gas interface. Here it is shown that optical ray-tracing can be a powerful tool for the analysis process by assisting in the comparison of experiments to numerical two-phase flow simulations. To this end, realistic ray-tracing images are generated from numerical simulations that correspond to the experimental setup. We apply the method on the jetting dynamics of single bubbles collapsing at a solid wall. Here, ray-tracing can help in the interpretation of raw experimental data, but also in prediction of the complex bubble interface deformations and internal structures during the collapse. The precise shape of the highly dynamical bubbles can be inferred and thereby a correction method for velocity values of the liquid jets can be provided.
Open AccessRealistic prediction and analysis of cavitation bubble dynamics via optical ray-tracing of the corresponding numerical simulations
Experimental analysis of cavitation bubble dynamics typically uses optical imaging. However, images are often severely affected by distortions and shadows due to refraction and total reflection at the liquid--gas interface. Here it is shown that optical ray-tracing can be a powerful tool for the analysis process by assisting in the comparison of experiments to numerical two-phase flow simulations. To this end, realistic ray-tracing images are generated from numerical simulations that correspond to the experimental setup. We apply the method on the jetting dynamics of single bubbles collapsing at a solid wall. Here, ray-tracing can help in the interpretation of raw experimental data, but also in prediction of the complex bubble interface deformations and internal structures during the collapse. The precise shape of the highly dynamical bubbles can be inferred and thereby a correction method for velocity values of the liquid jets can be provided.