Andrew Junghoon Park
Andrew Junghoon Park has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Anthony Grbic
University of Michigan
2 shared publications - Carl Pfeiffer
Sensors Directorate, Air Force Research Laboratory
2 shared publications - Sanghoek Kim
Department of Electronics and Information Convergence Engineering, Kyung Hee University, Yongin, South Korea
2 shared publications Ada S. Y. Poon
Department of Electrical Engineering, Stanford University 4 , Stanford, California 94305, USA
1 shared publicationAndrey Chabanov
University of Texas at San Antonio
1 shared publicationBoram Yoon
Agency for Defence Development, Daejeon, Republic of Korea
1 shared publication
Latest Publications
- 23 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (10) , 7899-7907
Passive Nonreciprocal Metasurface With Embedded Magnetic Bias That Exhibits Faraday Rotation
Nonreciprocal metasurfaces using ferrites and magnet-free approaches using space-time variation have been investigated extensively over the years. Magnet-free approaches offer the advantages of system miniaturization and integration into printed circuit technology. However, these approaches require power consumption. In this paper, a novel passive, nonreciprocal metasurface exhibiting Faraday rotation is explored. The metasurface is composed of a yttrium iron garnet (YIG) wafer with embedded neodymium permanent (Nd) magnets that are held together by dielectric substrates. The use of embedded periodic permanent magnets eliminates the need for an external bias for the YIG wafer. The dielectric substrates on either side of the YIG wafer provide impedance matching and secure the permanent magnets in place. Three examples are presented: a metasurface unit cell with cylindrical neodymium magnets, a unit cell with bullet-shaped neodymium magnets, and a finite-sized metasurface with cylindrical neodymium magnets. The S-parameters and performance metrics of the finite-sized metasurface exhibit close agreement with the periodic metasurface. A metasurface prototype with cylindrical permanent magnets was experimentally characterized and measurements show close agreement with simulations. This work presents a compelling approach to reducing the overall size of simultaneous transmit and receive (STAR) antenna systems for remote sensing, by replacing bulky conventional circulators with more compact metasurface-based solutions.
- 23 June 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 73 (10) , 7899-7907
Passive Nonreciprocal Metasurface With Embedded Magnetic Bias That Exhibits Faraday Rotation
Nonreciprocal metasurfaces using ferrites and magnet-free approaches using space-time variation have been investigated extensively over the years. Magnet-free approaches offer the advantages of system miniaturization and integration into printed circuit technology. However, these approaches require power consumption. In this paper, a novel passive, nonreciprocal metasurface exhibiting Faraday rotation is explored. The metasurface is composed of a yttrium iron garnet (YIG) wafer with embedded neodymium permanent (Nd) magnets that are held together by dielectric substrates. The use of embedded periodic permanent magnets eliminates the need for an external bias for the YIG wafer. The dielectric substrates on either side of the YIG wafer provide impedance matching and secure the permanent magnets in place. Three examples are presented: a metasurface unit cell with cylindrical neodymium magnets, a unit cell with bullet-shaped neodymium magnets, and a finite-sized metasurface with cylindrical neodymium magnets. The S-parameters and performance metrics of the finite-sized metasurface exhibit close agreement with the periodic metasurface. A metasurface prototype with cylindrical permanent magnets was experimentally characterized and measurements show close agreement with simulations. This work presents a compelling approach to reducing the overall size of simultaneous transmit and receive (STAR) antenna systems for remote sensing, by replacing bulky conventional circulators with more compact metasurface-based solutions.
- 14 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 58 (4) , 3427-3445
Accurate Clutter Synthesis for Heterogeneous Textures and Dynamic Radar Environments
This article proposes an accurate clutter synthesis method for a dynamic radar under various environmental conditions. Previous clutter synthesis methods mostly rely on empirical clutter models fitting the measurement results obtained from the limited conditions of observations. Inherently, these models have difficulties synthesizing clutter for unexplored environments and operational conditions. The method presented in this article overcomes this limitation by creating and summing the clutter patch by patch. The clutters of individual patches are synthesized by the clutter model corresponding to each patch’s specific conditions, such as the grazing angle, ground texture, and wind velocity. It enables one to synthesize clutter signals under various observation scenarios accurately. For example, this work demonstrates the synthesis of clutter signals from heterogeneous textures for an aircraft radar on a mission. Also, the clutter signals for a monopulse radar are synthesized and included in the radar simulation to evaluate the performance of a detection algorithm. Potentially, this method can be utilized to design a robust radar algorithm against the clutter environment of interests. For a given condition of measurement, it is shown that the synthesized clutters agree well with the actual measured data in their statistical characteristics. The program is freely available through the open code.
- 14 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Aerospace and Electronic Systems
- Vol. 58 (4) , 3427-3445
Accurate Clutter Synthesis for Heterogeneous Textures and Dynamic Radar Environments
This article proposes an accurate clutter synthesis method for a dynamic radar under various environmental conditions. Previous clutter synthesis methods mostly rely on empirical clutter models fitting the measurement results obtained from the limited conditions of observations. Inherently, these models have difficulties synthesizing clutter for unexplored environments and operational conditions. The method presented in this article overcomes this limitation by creating and summing the clutter patch by patch. The clutters of individual patches are synthesized by the clutter model corresponding to each patch’s specific conditions, such as the grazing angle, ground texture, and wind velocity. It enables one to synthesize clutter signals under various observation scenarios accurately. For example, this work demonstrates the synthesis of clutter signals from heterogeneous textures for an aircraft radar on a mission. Also, the clutter signals for a monopulse radar are synthesized and included in the radar simulation to evaluate the performance of a detection algorithm. Potentially, this method can be utilized to design a robust radar algorithm against the clutter environment of interests. For a given condition of measurement, it is shown that the synthesized clutters agree well with the actual measured data in their statistical characteristics. The program is freely available through the open code.
- Open Access
- 1 March 2021
- Published by AIP Publishing in AIP Advances
- Vol. 11 (3) , 035111
A microwave method to remotely assess the abdominal fat thickness
We introduce a method to measure the fat thickness by harnessing the physics of destructive interference. At certain frequencies, when the fat thickness equals a quarter wavelength, the amplitude of the reflected wave is minimized due to the destructive interference. Therefore, by observing the frequency where the reflection is minimized, we are able to deduce the fat thickness. This work demonstrates that this simple method can operate not only on a planar tissue model but also on a cylindrical model as well as the Zubal human phantom model. Finally, we experimentally demonstrate the estimation of the fat thickness for the planar tissue model with a broadband antenna. This method for assessing one’s abdominal fatness can allow continuous self-monitoring due to its low cost and simple measurement procedure.
- 1 March 2021
- Published by AIP Publishing in AIP Advances
- Vol. 11 (3) , 035111
Open AccessA microwave method to remotely assess the abdominal fat thickness
We introduce a method to measure the fat thickness by harnessing the physics of destructive interference. At certain frequencies, when the fat thickness equals a quarter wavelength, the amplitude of the reflected wave is minimized due to the destructive interference. Therefore, by observing the frequency where the reflection is minimized, we are able to deduce the fat thickness. This work demonstrates that this simple method can operate not only on a planar tissue model but also on a cylindrical model as well as the Zubal human phantom model. Finally, we experimentally demonstrate the estimation of the fat thickness for the planar tissue model with a broadband antenna. This method for assessing one’s abdominal fatness can allow continuous self-monitoring due to its low cost and simple measurement procedure.
- Open Access
- 6 May 2016
- Published by Association for Computing Machinery (ACM)
- p. 1-6
A Proposal of Undergraduate Curriculum to Include Research Under the Experiential Learning Framework
- 6 May 2016
- Published by Association for Computing Machinery (ACM)
- p. 1-6
Open AccessA Proposal of Undergraduate Curriculum to Include Research Under the Experiential Learning Framework