YZYinxiang Zeng

Yinxiang Zeng

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yinxiang Zeng has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Synergistic Solvation‐Interface Regulation via a Zincophilic‐Hydrophobic Additive Enables Deep‐Cycling Zinc Metal Anodes

    by Qinghong Yan, Jia‐Hui Li, Zijie Wu, Youhao Liao, Yinxiang Zeng, Weishan Li

    Aqueous zinc‐ion batteries are regarded as a compelling candidate for large‐scale energy storage due to their inherent safety, low cost, and ease of production. However, their commercialization is impeded by critical issues of zinc anodes, including uncontrolled dendrite growth, hydrogen evolution, zinc corrosion, and by‐product accumulation. Herein, we report a synergistic solvation‐interface regulation strategy using sodium dodecyl diphenyl ether disulfonate (C 12 ‐MADS) as a multifunctional additive. Specifically, the sulfonate groups enter the Zn 2+ solvation sheath to displace coordinated water molecules, lowering the desolvation energy barrier. Concurrently, these sulfonate groups anchor onto the zinc surface via strong affinity, while the hydrophobic alkyl chains extend outward to create a water‐exclusive inner Helmholtz plane. This dual action homogenizes interfacial Zn 2+ flux, suppresses water‐induced side reactions, and promotes dense, dendrite‐free zinc deposition. Consequently, the C 12 ‐MADS modified electrolyte enables a Zn||Zn symmetric cell to stably cycle for 1600 h under rigorous conditions (10 mA cm −2 , 10 mAh cm −2 ), and a Zn||I 2 /CNT full cell delivers exceptional rate capability and extended cycling stability. This work provides molecular‐level insight into the synergistic solvation‐interface regulation mechanism and offers a rational design principle for durable aqueous Zn anodes.

  • Zincophilic Interfacial Manipulation against Dendrite Growth and Side Reactions for Stable Zn Metal Anodes

    by Yinxiang Zeng, Zhihao Pei, Yan Guo, Deyan Luan, Xiaojun Gu, Xiong Wen (David) Lou

    Constructing multifunctional interphases to suppress the rampant Zn dendrite growth and detrimental side reactions is crucial for Zn anodes. Herein, a phytic acid (PA)‐ZnAl coordination compound is demonstrated as a versatile interphase layer to stabilize Zn anodes. The zincophilic PA‐ZnAl layer can manipulate Zn2+ flux and promote rapid desolvation kinetics, ensuring the uniform Zn deposition with dendrite‐free morphology. Moreover, the robust PA‐ZnAl protective layer can effectively inhibit the hydrogen evolution reaction and formation of byproducts, further contributing to the reversible Zn plating/stripping with high Coulombic efficiency. As a result, the Zn@PA‐ZnAl electrode shows a lower Zn nucleation overpotential and higher Zn2+ transference number compared with bare Zn. The Zn@PA‐ZnAl symmetric cell exhibits a prolonged lifespan of 650 h tested at 5 mA cm−2 and 5 mAh cm−2. Furthermore, the assembled Zn battery full cell based on this Zn@PA‐ZnAl anode also delivers decent cycling stability even under harsh conditions.


  • Zincophilic Interfacial Manipulation against Dendrite Growth and Side Reactions for Stable Zn Metal Anodes

    by Yinxiang Zeng, Zhihao Pei, Yan Guo, Deyan Luan, Xiaojun Gu, Xiong Wen (David) Lou

    Constructing multifunctional interphases to suppress the rampant Zn dendrite growth and detrimental side reactions is crucial for Zn anodes. Herein, a phytic acid (PA)‐ZnAl coordination compound is demonstrated as a versatile interphase layer to stabilize Zn anodes. The zincophilic PA‐ZnAl layer can manipulate Zn2+ flux and promote rapid desolvation kinetics, ensuring the uniform Zn deposition with dendrite‐free morphology. Moreover, the robust PA‐ZnAl protective layer can effectively inhibit the hydrogen evolution reaction and formation of byproducts, further contributing to the reversible Zn plating/stripping with high Coulombic efficiency. As a result, the Zn@PA‐ZnAl electrode shows a lower Zn nucleation overpotential and higher Zn2+ transference number compared with bare Zn. The Zn@PA‐ZnAl symmetric cell exhibits a prolonged lifespan of 650 h tested at 5 mA cm−2 and 5 mAh cm−2. Furthermore, the assembled Zn battery full cell based on this Zn@PA‐ZnAl anode also delivers decent cycling stability even under harsh conditions.


  • Bimetal‐Organic Framework Nanoboxes Enable Accelerated Redox Kinetics and Polysulfide Trapping for Lithium‐Sulfur Batteries

    by Zhuo Zhu, Yinxiang Zeng, Zhihao Pei, Deyan Luan, Xin Wang, Xiong Wen (David) Lou

    Lithium‐sulfur (Li−S) batteries are considered as promising candidates for next‐generation energy storage systems in view of the high theoretical energy density and low cost of sulfur resources. The suppression of polysulfide diffusion and promotion of redox kinetics are the main challenges for Li−S batteries. Herein, we design and prepare a novel type of ZnCo‐based bimetallic metal–organic framework nanoboxes (ZnCo‐MOF NBs) to serve as a functional sulfur host for Li−S batteries. The hollow architecture of ZnCo‐MOF NBs can ensure fast charge transfer, improved sulfur utilization, and effective confinement of lithium polysulfides (LiPSs). The atomically dispersed Co−O4 sites in ZnCo‐MOF NBs can firmly capture LiPSs and electrocatalytically accelerate their conversion kinetics. Benefiting from the multiple structural advantages, the ZnCo‐MOF/S cathode shows high reversible capacity, impressive rate capability, and prolonged cycling performance for 300 cycles.


  • Bimetal‐Organic Framework Nanoboxes Enable Accelerated Redox Kinetics and Polysulfide Trapping for Lithium‐Sulfur Batteries

    by Zhuo Zhu, Yinxiang Zeng, Zhihao Pei, Deyan Luan, Xin Wang, Xiong Wen (David) Lou

    Lithium‐sulfur (Li−S) batteries are considered as promising candidates for next‐generation energy storage systems in view of the high theoretical energy density and low cost of sulfur resources. The suppression of polysulfide diffusion and promotion of redox kinetics are the main challenges for Li−S batteries. Herein, we design and prepare a novel type of ZnCo‐based bimetallic metal–organic framework nanoboxes (ZnCo‐MOF NBs) to serve as a functional sulfur host for Li−S batteries. The hollow architecture of ZnCo‐MOF NBs can ensure fast charge transfer, improved sulfur utilization, and effective confinement of lithium polysulfides (LiPSs). The atomically dispersed Co−O4 sites in ZnCo‐MOF NBs can firmly capture LiPSs and electrocatalytically accelerate their conversion kinetics. Benefiting from the multiple structural advantages, the ZnCo‐MOF/S cathode shows high reversible capacity, impressive rate capability, and prolonged cycling performance for 300 cycles.


  • Formation of CuMn Prussian Blue Analog Double‐Shelled Nanoboxes Toward Long‐Life Zn‐ion Batteries

    by Yinxiang Zeng, Jianzhong Xu, Yan Wang, Sheng Li, Deyan Luan, Xiong Wen (David) Lou

    Prussian blue analogs (PBAs) are promising candidates for aqueous Zn‐ion batteries due to their unique open‐framework structures. However, they suffer from limited capacity and severe capacity decay originating from insufficient redox sites and structural instability. Herein, Cu‐substituted Mn‐PBA double‐shelled nanoboxes (CuMn‐PBA DSNBs) prepared by tannic acid etching and cation exchange approaches are demonstrated for efficient Zn ion storage. The unique hollow structures can expose abundant active sites and alleviate the volume change during the cycling test. Moreover, partial Cu substitution and induced Mn vacancies might inhibit the Jahn–Teller distortions of Mn‐N6 octahedra, thus contributing to the prolonged lifespan. As a result, CuMn‐PBA DSNBs exhibit high reversible capacity, decent rate performance and superior cycling stability for 2000 cycles. Furthermore, ex situ characterizations reveal that the charge storage mechanism of CuMn‐PBA DSNBs mainly involves the reversible redox reactions of transition metals and Zn2+ ion insertion/extraction processes.


  • Formation of CuMn Prussian Blue Analog Double‐Shelled Nanoboxes Toward Long‐Life Zn‐ion Batteries

    by Yinxiang Zeng, Jianzhong Xu, Yan Wang, Sheng Li, Deyan Luan, Xiong Wen (David) Lou

    Prussian blue analogs (PBAs) are promising candidates for aqueous Zn‐ion batteries due to their unique open‐framework structures. However, they suffer from limited capacity and severe capacity decay originating from insufficient redox sites and structural instability. Herein, Cu‐substituted Mn‐PBA double‐shelled nanoboxes (CuMn‐PBA DSNBs) prepared by tannic acid etching and cation exchange approaches are demonstrated for efficient Zn ion storage. The unique hollow structures can expose abundant active sites and alleviate the volume change during the cycling test. Moreover, partial Cu substitution and induced Mn vacancies might inhibit the Jahn–Teller distortions of Mn‐N6 octahedra, thus contributing to the prolonged lifespan. As a result, CuMn‐PBA DSNBs exhibit high reversible capacity, decent rate performance and superior cycling stability for 2000 cycles. Furthermore, ex situ characterizations reveal that the charge storage mechanism of CuMn‐PBA DSNBs mainly involves the reversible redox reactions of transition metals and Zn2+ ion insertion/extraction processes.


  • Steering Catalytic Activity and Selectivity of CO2 Photoreduction to Syngas with Hydroxy‐Rich Cu2S@ROH‐NiCo2O3 Double‐Shelled Nanoboxes

    by Lei Li, Xinyan Dai, De‐Li Chen, Yinxiang Zeng, Yong Hu, Xiong Wen (David) Lou

    Simultaneous transformation of CO2 and H2O into syngas (CO and H2) using solar power is desirable for industrial applications. Herein, an efficient photocatalyst based on double‐shelled nanoboxes, with an outer shell of hydroxy‐rich nickel cobaltite nanosheets and an inner shell of Cu2S (Cu2S@ROH‐NiCo2O3), is prepared via a multistep templating strategy. The high performance of Cu2S@ROH‐NiCo2O3 (7.1 mmol g−1 h−1 for CO; 2.8 mmol g−1 h−1 for H2) is attributed to the hierarchical hollow geometry and p–n heterojunction to promote light absorption and charge separation. Spectroscopic and theoretical analyses elucidate that the ROH‐NiCo2O3 surface enhances *CO2 adsorption and lowers energy barriers for CO2‐to‐CO. Therefore, modulating the hydroxy contents of ROH‐NiCo2O3 can achieve broad CO/H2 ratios from 0.51 to 1.24. This work offers in‐depth insights into adjustable syngas photosynthesis and generalized concepts of selective heterogeneous CO2 photoreduction beyond cobalt‐based oxides.


  • Steering Catalytic Activity and Selectivity of CO2 Photoreduction to Syngas with Hydroxy‐Rich Cu2S@ROH‐NiCo2O3 Double‐Shelled Nanoboxes

    by Lei Li, Xinyan Dai, De‐Li Chen, Yinxiang Zeng, Yong Hu, Xiong Wen (David) Lou

    Simultaneous transformation of CO2 and H2O into syngas (CO and H2) using solar power is desirable for industrial applications. Herein, an efficient photocatalyst based on double‐shelled nanoboxes, with an outer shell of hydroxy‐rich nickel cobaltite nanosheets and an inner shell of Cu2S (Cu2S@ROH‐NiCo2O3), is prepared via a multistep templating strategy. The high performance of Cu2S@ROH‐NiCo2O3 (7.1 mmol g−1 h−1 for CO; 2.8 mmol g−1 h−1 for H2) is attributed to the hierarchical hollow geometry and p–n heterojunction to promote light absorption and charge separation. Spectroscopic and theoretical analyses elucidate that the ROH‐NiCo2O3 surface enhances *CO2 adsorption and lowers energy barriers for CO2‐to‐CO. Therefore, modulating the hydroxy contents of ROH‐NiCo2O3 can achieve broad CO/H2 ratios from 0.51 to 1.24. This work offers in‐depth insights into adjustable syngas photosynthesis and generalized concepts of selective heterogeneous CO2 photoreduction beyond cobalt‐based oxides.


  • Top Cited Papers
    Open Access

    Confining Sn nanoparticles in interconnected N-doped hollow carbon spheres as hierarchical zincophilic fibers for dendrite-free Zn metal anodes

    by Huan Yu, Yinxiang Zeng, Nian Wu Li, Deyan Luan, Le Yu, Xiong Wen (David) Lou

    We developed a three-dimensional hybrid fiber host consisting of interconnected N-doped hollow carbon spheres embedded with Sn nanoparticles (denoted as Sn@NHCF) for Zn metal anodes in high-performance Zn metal batteries. Experimental observations and density functional theory calculation reveal that the zincophilic Sn nanoparticles and N-doped carbons enable the homogeneous Zn deposition on the interior and exterior surfaces of the hollow fibers. Moreover, the hierarchical hollow fiber network effectively reduces the structural stress during the plating/stripping process. As a result, the developed Sn@NHCF host exhibits remarkable electrochemical properties in terms of high Coulombic efficiency, low voltage hysteresis, and prolonged cycling stability without dendrite formation. Moreover, a full cell based on the designed Sn@NHCF-Zn composite anode and a V 2 O 5 cathode demonstrates superior rate capability and stable cycle life. This work provides a new strategy for the design of dendrite-free Zn anodes for practical applications.