Oleksandr Sievierinov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Oleksandr Sievierinov has a total of 97 co-authors. Here are the top co-authors by number of shared publications:
- Vadym Poddubnyi
Харківський національний університет радіоелектроніки
5 shared publications - Serhii Yevseiev
National Technical University “Kharkiv Polytechnic Institute
4 shared publications - Roman Gvozdov
Харківський національний університет радіоелектроніки
3 shared publications - Vitalii Martovytskyi
Kharkiv National University of Radio Electronics
3 shared publications - Volodymyr Fedorchenko
Харківський національний університет радіоелектроніки
3 shared publications - Yevhen Melenti
National Academy of the Security Service of Ukraine
3 shared publications
Latest Publications
- Open Access
- 30 September 2026
- Published by Kharkiv National University of Radioelectronics in Radiotekhnika
- No. 226,p. 60-65
Hybrid method of scrambling analog composite video signal for FPV channels
The article addresses the protection of analog composite video signals in FPV channels, where low processing latency, compatibility with the analog signal path, and moderate hardware complexity are critical. Current approaches to video data protection are analyzed, showing that most methods operate on digital representations of frames, pixels, or encoded video streams, whereas protection of the analog CVBS composite signal has received considerably less attention. A concept of a hybrid analog-digital scrambler is proposed in which analog transformations of the CVBS signal are controlled by a digital pseudorandom sequence generated from a secret key. The considered transformations include inversion of the active part of video lines, pseudorandom time shifting, permutation of line groups, amplitude transformations, and their combinations. The digital component is used not to encrypt the entire frame, but to generate control bits that define the type and parameters of analog video-signal transformation. Evaluation criteria for the proposed approach are defined, including residual image intelligibility without the key, reconstruction quality after descrambling, processing latency, hardware complexity, synchronization stability, and variability of key-dependent control. The feasibility of further research into this approach for protecting analog FPV video channels without a complete transition to a digital video transmission system is substantiated.
- 30 September 2026
- Published by Kharkiv National University of Radioelectronics in Radiotekhnika
- No. 226,p. 60-65
Open AccessHybrid method of scrambling analog composite video signal for FPV channels
The article addresses the protection of analog composite video signals in FPV channels, where low processing latency, compatibility with the analog signal path, and moderate hardware complexity are critical. Current approaches to video data protection are analyzed, showing that most methods operate on digital representations of frames, pixels, or encoded video streams, whereas protection of the analog CVBS composite signal has received considerably less attention. A concept of a hybrid analog-digital scrambler is proposed in which analog transformations of the CVBS signal are controlled by a digital pseudorandom sequence generated from a secret key. The considered transformations include inversion of the active part of video lines, pseudorandom time shifting, permutation of line groups, amplitude transformations, and their combinations. The digital component is used not to encrypt the entire frame, but to generate control bits that define the type and parameters of analog video-signal transformation. Evaluation criteria for the proposed approach are defined, including residual image intelligibility without the key, reconstruction quality after descrambling, processing latency, hardware complexity, synchronization stability, and variability of key-dependent control. The feasibility of further research into this approach for protecting analog FPV video channels without a complete transition to a digital video transmission system is substantiated.
- Open Access
- 4 July 2026
- Published by National Technical University Kharkiv Polytechnic Institute in Terra security
- Vol. 2 (2) , 34-38
MODELING AND EVALUATING THE IMPACT OF INTRUSION DETECTION SYSTEMS ON THE PERFORMANCE OF ISOLATED INFORMATION AND COMMUNICATION SYSTEMS
Topicality. Today’s information and communication systems (ICS) face a growing number of complex cyber threats, making active defense mechanisms absolutely necessary. Yet, running these security tools constantly, especially Intrusion Detection and Prevention Systems (IDS/IPS), takes a toll on network bandwidth and creates heavy computational loads at the routing level. The subject of the study is the direct impact of IDS/IPS on the performance characteristics of an isolated network segment under various load conditions, with an emphasis on resource depletion due to fragmentation at layer 3 of the OSI model. The purpose of this work is to measure the real-world trade-off between security and performance. We aim to assess how much computational power is lost and precisely measure the latency caused by deep packet inspection and interrupt handling. The following results were obtained. We built a complete field-testing environment using isolated virtual machines. We carefully tracked packet processing latency and CPU usage across three states: a baseline with no security, standard traffic with IDS logging enabled, and a simulated high-volume fragmented DDoS attack. The data showed that a basic unprotected router uses very few resources (about 3% CPU, 2.2 ms latency). Turning on security rules bumped the latency to 4.3 ms. More importantly, when hit with a fragmented flood attack, the router’s CPU load spiked to 48%. This spike was mostly caused by the kernel handling software interrupts (ksoftirqd), which eventually caused legitimate packets to drop. Conclusion. Securing a network strongly increases the computational strain on the router. We observed significant performance drops, including CPU exhaustion and denial of service for regular users during volumetric fragmentation attacks. This shows that organizations must constantly refine their firewall policies and look into kernel-bypass technologies to keep their ICS networks running smoothly.
- 4 July 2026
- Published by National Technical University Kharkiv Polytechnic Institute in Terra security
- Vol. 2 (2) , 34-38
Open AccessMODELING AND EVALUATING THE IMPACT OF INTRUSION DETECTION SYSTEMS ON THE PERFORMANCE OF ISOLATED INFORMATION AND COMMUNICATION SYSTEMS
Topicality. Today’s information and communication systems (ICS) face a growing number of complex cyber threats, making active defense mechanisms absolutely necessary. Yet, running these security tools constantly, especially Intrusion Detection and Prevention Systems (IDS/IPS), takes a toll on network bandwidth and creates heavy computational loads at the routing level. The subject of the study is the direct impact of IDS/IPS on the performance characteristics of an isolated network segment under various load conditions, with an emphasis on resource depletion due to fragmentation at layer 3 of the OSI model. The purpose of this work is to measure the real-world trade-off between security and performance. We aim to assess how much computational power is lost and precisely measure the latency caused by deep packet inspection and interrupt handling. The following results were obtained. We built a complete field-testing environment using isolated virtual machines. We carefully tracked packet processing latency and CPU usage across three states: a baseline with no security, standard traffic with IDS logging enabled, and a simulated high-volume fragmented DDoS attack. The data showed that a basic unprotected router uses very few resources (about 3% CPU, 2.2 ms latency). Turning on security rules bumped the latency to 4.3 ms. More importantly, when hit with a fragmented flood attack, the router’s CPU load spiked to 48%. This spike was mostly caused by the kernel handling software interrupts (ksoftirqd), which eventually caused legitimate packets to drop. Conclusion. Securing a network strongly increases the computational strain on the router. We observed significant performance drops, including CPU exhaustion and denial of service for regular users during volumetric fragmentation attacks. This shows that organizations must constantly refine their firewall policies and look into kernel-bypass technologies to keep their ICS networks running smoothly.
- 29 May 2026
- Published by Kharkiv National University of Radioelectronics in Management Information System and Devises
- No. 189,p. 235-246
METHOD FOR ENSURING DATA INTEGRITY USING A MODIFIED ERROR-CORRECTING CODE IN INDUSTRIAL INTERNET OF THINGS SYSTEMS
The subject of the study is methods for modifying error-correcting codes to ensure data integrity in Industrial Internet of Things (IIoT) systems. The purpose of the research is to develop a method for ensuring data integrity in Industrial Internet of Things systems through the application of modified error-correcting codes, namely shortened Goppa codes, for the detection and correction of errors arising during information transmission and processing. Objectives: to analyze methods for modifying error-correcting codes, particularly Goppa codes, in order to introduce message obfuscation for ensuring data integrity in Industrial Internet of Things systems; to investigate methods for shortening Goppa codes and determine the most appropriate constructions for providing error resistance and data integrity; to develop a method for ensuring data integrity using a shortened error-correcting code in Industrial Internet of Things systems. To accomplish the outlined objectives, the following methods were applied: theoretical methods of analysis and mathematical modeling, empirical methods of comparative analysis of code characteristics, as well as elements of computer experimentation for calculating and evaluating the parameters of shortened Goppa codes. Results achieved. Methods for modifying Goppa codes were analyzed. For constructing a data integrity assurance system in IIoT, a code-shortening method was proposed that preserves the minimum code distance and enables the formation of codes with specified parameters. Constructions for shortening Goppa codes were investigated, and the feasibility of using shortened Goppa codes based on irreducible polynomials was substantiated. A method for ensuring data integrity using shortened Goppa codes was proposed. Conclusions. The implementation of shortening procedures for Goppa codes constructed on the basis of irreducible polynomials makes it possible to form code constructions for ensuring data integrity in Industrial Internet of Things systems while simultaneously maintaining high error-resistance properties. A method for ensuring data integrity using shortened Goppa codes has been proposed, providing flexible adjustment of code parameters and offering prospects for guaranteeing the information concealment of messages.
- 29 May 2026
- Published by Kharkiv National University of Radioelectronics in Management Information System and Devises
- No. 189,p. 235-246
METHOD FOR ENSURING DATA INTEGRITY USING A MODIFIED ERROR-CORRECTING CODE IN INDUSTRIAL INTERNET OF THINGS SYSTEMS
The subject of the study is methods for modifying error-correcting codes to ensure data integrity in Industrial Internet of Things (IIoT) systems. The purpose of the research is to develop a method for ensuring data integrity in Industrial Internet of Things systems through the application of modified error-correcting codes, namely shortened Goppa codes, for the detection and correction of errors arising during information transmission and processing. Objectives: to analyze methods for modifying error-correcting codes, particularly Goppa codes, in order to introduce message obfuscation for ensuring data integrity in Industrial Internet of Things systems; to investigate methods for shortening Goppa codes and determine the most appropriate constructions for providing error resistance and data integrity; to develop a method for ensuring data integrity using a shortened error-correcting code in Industrial Internet of Things systems. To accomplish the outlined objectives, the following methods were applied: theoretical methods of analysis and mathematical modeling, empirical methods of comparative analysis of code characteristics, as well as elements of computer experimentation for calculating and evaluating the parameters of shortened Goppa codes. Results achieved. Methods for modifying Goppa codes were analyzed. For constructing a data integrity assurance system in IIoT, a code-shortening method was proposed that preserves the minimum code distance and enables the formation of codes with specified parameters. Constructions for shortening Goppa codes were investigated, and the feasibility of using shortened Goppa codes based on irreducible polynomials was substantiated. A method for ensuring data integrity using shortened Goppa codes was proposed. Conclusions. The implementation of shortening procedures for Goppa codes constructed on the basis of irreducible polynomials makes it possible to form code constructions for ensuring data integrity in Industrial Internet of Things systems while simultaneously maintaining high error-resistance properties. A method for ensuring data integrity using shortened Goppa codes has been proposed, providing flexible adjustment of code parameters and offering prospects for guaranteeing the information concealment of messages.
- Open Access
- 29 January 2026
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 361 (1) , 501-509
МЕТОД ВИЯВЛЕННЯ АНОМАЛІЙ У KUBERNETES-КЛАСТЕРАХ З ВИКОРИСТАННЯМ LSTM AUTOENCODE
The object of the study is an information technology for detecting anomalous and potentially malicious activity in containerized environments based on the Kubernetes platform. The subject of the research comprises methods for analyzing multidimensional telemetry data of a Kubernetes cluster and their application in combination with deep learning algorithms for building intelligent intrusion detection systems. The paper addresses the problem of constructing a comprehensive dataset that integrates network traffic characteristics, container-level metrics, and Kubernetes cluster state indicators. Special attention is given to data preprocessing, including missing value imputation, feature space standardization, and the formation of time sequences required to model the dynamic behavior of the system. Considering the imbalance between the number of normal operation samples and attack scenarios, as well as the limited set of known attack types, the study substantiates the feasibility of using an anomaly detection approach based on training exclusively on normal behavior data. To solve the stated problem, the use of an LSTM Autoencoder is proposed, which enables modeling temporal dependencies in telemetry data and detecting deviations from learned normal behavior through reconstruction error analysis. A formal approach to determining the anomaly threshold based on F1-score optimization is proposed, ensuring a balanced trade-off between attack detection recall and the number of false positives. During the experimental study, the effectiveness of the proposed approach is evaluated using standard classification performance metrics, including precision, recall, and F1-score. The obtained results demonstrate the model’s ability to detect up to 95% of attack scenarios in the absence of prior information about their types, confirming the suitability of the approach for zero-day attack detection. The practical significance of the work lies in the possibility of applying the proposed method to build robust and adaptive security systems for Kubernetes clusters, focused on real-time behavioral anomaly analysis.
- 29 January 2026
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 361 (1) , 501-509
Open AccessМЕТОД ВИЯВЛЕННЯ АНОМАЛІЙ У KUBERNETES-КЛАСТЕРАХ З ВИКОРИСТАННЯМ LSTM AUTOENCODE
The object of the study is an information technology for detecting anomalous and potentially malicious activity in containerized environments based on the Kubernetes platform. The subject of the research comprises methods for analyzing multidimensional telemetry data of a Kubernetes cluster and their application in combination with deep learning algorithms for building intelligent intrusion detection systems. The paper addresses the problem of constructing a comprehensive dataset that integrates network traffic characteristics, container-level metrics, and Kubernetes cluster state indicators. Special attention is given to data preprocessing, including missing value imputation, feature space standardization, and the formation of time sequences required to model the dynamic behavior of the system. Considering the imbalance between the number of normal operation samples and attack scenarios, as well as the limited set of known attack types, the study substantiates the feasibility of using an anomaly detection approach based on training exclusively on normal behavior data. To solve the stated problem, the use of an LSTM Autoencoder is proposed, which enables modeling temporal dependencies in telemetry data and detecting deviations from learned normal behavior through reconstruction error analysis. A formal approach to determining the anomaly threshold based on F1-score optimization is proposed, ensuring a balanced trade-off between attack detection recall and the number of false positives. During the experimental study, the effectiveness of the proposed approach is evaluated using standard classification performance metrics, including precision, recall, and F1-score. The obtained results demonstrate the model’s ability to detect up to 95% of attack scenarios in the absence of prior information about their types, confirming the suitability of the approach for zero-day attack detection. The practical significance of the work lies in the possibility of applying the proposed method to build robust and adaptive security systems for Kubernetes clusters, focused on real-time behavioral anomaly analysis.
- Open Access
- 11 December 2025
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 359 (6.1) , 389-394
СТІЙКІСТЬ СХЕМИ АВТЕНТИФІКАЦІЇ ЗАСНОВАНОЇ НА НУЛЬОВОМУ ВОДЯНОМУ ЗНАКУ
The article presents an analysis of the robustness of an authentication scheme based on zero watermarking. The study examines a two-factor authentication scheme that uses "knowledge of something" (a password) and "possession of something" (a digital RGB image) as its factors. The zero watermarking algorithm chosen is based on DWT and K-means transformations, with additional use of the Swish function. The analysis is conducted by considering the theoretical complexity of the algorithm assuming the adversary knows its parameters, such as the password, the hash of the password, the image, the reference watermark, the transformation result, and other parameters. Previous studies have shown a high theoretical robustness of the scheme, which relies on the complexity of the password and the dimensionality of the image. For large image sizes (512×512 pixels and above), a relatively high level of cryptographic resistance is achieved. However, this robustness is not formally proven, and the actual strength may be significantly lower due to the specifics of the images and transformations, which can introduce additional vulnerabilities. The algorithm is subject to a relatively high rate of collision, associated with digital image transformations and matrix multiplications, which weakens its resistance. Authentication schemes and zero watermarking algorithms require further research, formal proof of cryptographic properties, and methods for integration into access control systems, as they can provide a high level of authentication robustness in systems with high noise levels. Additionally, the convenience and low cost of such schemes give them an advantage over other authentication methods. The study provides recommendations for improving the potential characteristics of the algorithm.
- 11 December 2025
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 359 (6.1) , 389-394
Open AccessСТІЙКІСТЬ СХЕМИ АВТЕНТИФІКАЦІЇ ЗАСНОВАНОЇ НА НУЛЬОВОМУ ВОДЯНОМУ ЗНАКУ
The article presents an analysis of the robustness of an authentication scheme based on zero watermarking. The study examines a two-factor authentication scheme that uses "knowledge of something" (a password) and "possession of something" (a digital RGB image) as its factors. The zero watermarking algorithm chosen is based on DWT and K-means transformations, with additional use of the Swish function. The analysis is conducted by considering the theoretical complexity of the algorithm assuming the adversary knows its parameters, such as the password, the hash of the password, the image, the reference watermark, the transformation result, and other parameters. Previous studies have shown a high theoretical robustness of the scheme, which relies on the complexity of the password and the dimensionality of the image. For large image sizes (512×512 pixels and above), a relatively high level of cryptographic resistance is achieved. However, this robustness is not formally proven, and the actual strength may be significantly lower due to the specifics of the images and transformations, which can introduce additional vulnerabilities. The algorithm is subject to a relatively high rate of collision, associated with digital image transformations and matrix multiplications, which weakens its resistance. Authentication schemes and zero watermarking algorithms require further research, formal proof of cryptographic properties, and methods for integration into access control systems, as they can provide a high level of authentication robustness in systems with high noise levels. Additionally, the convenience and low cost of such schemes give them an advantage over other authentication methods. The study provides recommendations for improving the potential characteristics of the algorithm.
- Open Access
- 25 September 2025
- Published by Kharkiv National University of Radioelectronics in Innovative technologies and scientific solutions for industries
- No. 3(33),p. 102-110
User authentication model using zero watermarking based on RGB images
The subject of the research is the methods and schemes of user authentication in information and communication networks. The aim of the work is to develop a user authentication model in information and communication systems using the zero-watermarking method based on RGB images. Objectives: to examine the main issues arising during the integration of access control systems; to develop a user authentication model using zero-watermarking; to study potential characteristics and put forward proposals/recommendations for its application in authentication; to construct graphical schemes that illustrate processes and procedures. Methods used: modeling methods and formal description methods. Results achieved: an improved user authentication model based on the zero-watermarking algorithm has been proposed as an alternative to existing authentication schemes in information and communication systems; its potential characteristics have been studied, confirming the prospects of the development; graphical representations of processes and procedures have been constructed. Conclusions: in the course of the work, the main problems faced by owners of information and communication systems during the integration of authentication systems were briefly reviewed; an improved authentication model using zero-watermarking was proposed. The zero-watermarking method is based on RGB images employing K-means clustering and DWT, while a password is used as the second factor. Three operating modes are presented: registration, authentication, and modification of key authentication data. This model serves as an alternative to existing schemes and can potentially reduce the cost of authentication, lower Type I and Type II error rates compared to similar authentication schemes, and improve the convenience of authentication in information and communication systems. It also expands the range of authentication schemes available to system owners during integration.
- 25 September 2025
- Published by Kharkiv National University of Radioelectronics in Innovative technologies and scientific solutions for industries
- No. 3(33),p. 102-110
Open AccessUser authentication model using zero watermarking based on RGB images
The subject of the research is the methods and schemes of user authentication in information and communication networks. The aim of the work is to develop a user authentication model in information and communication systems using the zero-watermarking method based on RGB images. Objectives: to examine the main issues arising during the integration of access control systems; to develop a user authentication model using zero-watermarking; to study potential characteristics and put forward proposals/recommendations for its application in authentication; to construct graphical schemes that illustrate processes and procedures. Methods used: modeling methods and formal description methods. Results achieved: an improved user authentication model based on the zero-watermarking algorithm has been proposed as an alternative to existing authentication schemes in information and communication systems; its potential characteristics have been studied, confirming the prospects of the development; graphical representations of processes and procedures have been constructed. Conclusions: in the course of the work, the main problems faced by owners of information and communication systems during the integration of authentication systems were briefly reviewed; an improved authentication model using zero-watermarking was proposed. The zero-watermarking method is based on RGB images employing K-means clustering and DWT, while a password is used as the second factor. Three operating modes are presented: registration, authentication, and modification of key authentication data. This model serves as an alternative to existing schemes and can potentially reduce the cost of authentication, lower Type I and Type II error rates compared to similar authentication schemes, and improve the convenience of authentication in information and communication systems. It also expands the range of authentication schemes available to system owners during integration.
- Open Access
- 30 June 2025
- Published by Kharkiv National University of Radioelectronics in Innovative technologies and scientific solutions for industries
- No. 2(32),p. 69-78
Method of user authentication in information and communication systems using zero watermark
The subject access control systems is information and communication networks. The purpose is to develop a user authentication method for information and communication systems as an access control system using a zero watermarking algorithm. Objectivs: develop a user authentication method based on zero watermarking, test the proposed method, provide suggestions and recommendations for the further application of the authentication method. To accomplish the defined tasks, the following methods computer simulation of the proposed method to study its characteristics; empirical methods – applying the method and observing the transformation results; tatistical methods – calculating indicators such as Pearson correlation coefficients, peak signal-to-noise ratio (PSNR), and Spearman’s rank correlation coefficients. Results achieved: novel user authentication method based on a unique zero watermarking algorithm was proposed for the first time within an information and communication system. Suggestions for further application of the method were formulated, and the method was successfully tested. Conclusions. During the study, an authentication method based on a zero watermarking algorithm was proposed, designed to be used as an access control system at industrial enterprises. The method was tested, and the test results confirm its operability and effectiveness. This method has the potential to reduce the cost of two-factor authentication when deploying authentication systems in large enterprises.
- 30 June 2025
- Published by Kharkiv National University of Radioelectronics in Innovative technologies and scientific solutions for industries
- No. 2(32),p. 69-78
Open AccessMethod of user authentication in information and communication systems using zero watermark
The subject access control systems is information and communication networks. The purpose is to develop a user authentication method for information and communication systems as an access control system using a zero watermarking algorithm. Objectivs: develop a user authentication method based on zero watermarking, test the proposed method, provide suggestions and recommendations for the further application of the authentication method. To accomplish the defined tasks, the following methods computer simulation of the proposed method to study its characteristics; empirical methods – applying the method and observing the transformation results; tatistical methods – calculating indicators such as Pearson correlation coefficients, peak signal-to-noise ratio (PSNR), and Spearman’s rank correlation coefficients. Results achieved: novel user authentication method based on a unique zero watermarking algorithm was proposed for the first time within an information and communication system. Suggestions for further application of the method were formulated, and the method was successfully tested. Conclusions. During the study, an authentication method based on a zero watermarking algorithm was proposed, designed to be used as an access control system at industrial enterprises. The method was tested, and the test results confirm its operability and effectiveness. This method has the potential to reduce the cost of two-factor authentication when deploying authentication systems in large enterprises.
- Open Access
- 19 June 2025
- Published by Kharkiv National University of Radioelectronics in Radiotekhnika
- No. 221,p. 46-50
Ensuring data integrity in industrial Internet of Things systems using error-correcting codes
The article explores the challenges of ensuring data integrity and error resistance in Industrial Internet of Things (IIoT) systems, which are critically important for the functioning of automated manufacturing processes. A comprehensive analysis of key IIoT security issues is presented, along with an overview of current data protection approaches. The focus is placed on the use of error-correcting codes, particularly Goppa codes, which demonstrate high efficiency in detecting and correcting errors and show strong potential for integration into cryptographic systems. It is shown that Goppa codes can ensure not only error resistance but also data integrity due to the vast number of encoding rules, making them suitable for use in post-quantum cryptography scenarios. The results demonstrate that using Goppa codes allows for the preservation of data integrity and a significant reduction in the likelihood of introducing false data while maintaining the required level of error resistance. This confirms the feasibility of integrating such codes into the IIoT environment.
- 19 June 2025
- Published by Kharkiv National University of Radioelectronics in Radiotekhnika
- No. 221,p. 46-50
Open AccessEnsuring data integrity in industrial Internet of Things systems using error-correcting codes
The article explores the challenges of ensuring data integrity and error resistance in Industrial Internet of Things (IIoT) systems, which are critically important for the functioning of automated manufacturing processes. A comprehensive analysis of key IIoT security issues is presented, along with an overview of current data protection approaches. The focus is placed on the use of error-correcting codes, particularly Goppa codes, which demonstrate high efficiency in detecting and correcting errors and show strong potential for integration into cryptographic systems. It is shown that Goppa codes can ensure not only error resistance but also data integrity due to the vast number of encoding rules, making them suitable for use in post-quantum cryptography scenarios. The results demonstrate that using Goppa codes allows for the preservation of data integrity and a significant reduction in the likelihood of introducing false data while maintaining the required level of error resistance. This confirms the feasibility of integrating such codes into the IIoT environment.
- Open Access
- 31 March 2025
- Published by Kharkiv National University of Radioelectronics in Innovative technologies and scientific solutions for industries
- No. 1(31),p. 102-114
Research the efficiency of image processing algorithms in zero watermark schemes
Subject matter: image transformation algorithms used in zero-watermarking techniques for development authentication algorithm. Objectives: identify effective image transformation algorithms for use in zero-watermarking schemes. The study addresses the following tasks: examining the range of existing image transformation algorithms, formulating informal requirements for image transformation algorithms to be used in zero-watermarking-based authentication schemes, and making assumptions about the feasibility of using each analyzed image transformation algorithm. To achieve these objectives, the following methods are employed: modeling – software implementation of each studied algorithm, empirical methods – application of algorithms and observation of transformation results, mathematical methods – calculation of normal correlation metrics and peak signal-to-noise ratio (PSNR). Results: an analysis was conducted on a set of algorithms that could potentially be used in zero-watermarking schemes for authentication purposes. A methodology was developed to evaluate algorithms while considering image dimensionality reduction due to compression. Additionally, requirements for image processing algorithms in zero-watermarking-based authentication were established. Conclusions: the study identified the most effective image transformation algorithms for use in zero-watermarking authentication schemes: DWT (Discrete Wavelet Transform), SVD (Singular Value Decomposition), DCT (Discrete Cosine Transform), and K-means clustering. For low-resolution images, DCT is a viable option. The most effective algorithm combinations are DWT + DCT and DWT + K-means, as these combinations ensure optimal robustness to noise while maintaining sensitivity to distinguish similar images. Future authentication schemes based on these algorithms may be useful (in combination with IoT devices), including for user authentication in enterprises and organizations.
- 31 March 2025
- Published by Kharkiv National University of Radioelectronics in Innovative technologies and scientific solutions for industries
- No. 1(31),p. 102-114
Open AccessResearch the efficiency of image processing algorithms in zero watermark schemes
Subject matter: image transformation algorithms used in zero-watermarking techniques for development authentication algorithm. Objectives: identify effective image transformation algorithms for use in zero-watermarking schemes. The study addresses the following tasks: examining the range of existing image transformation algorithms, formulating informal requirements for image transformation algorithms to be used in zero-watermarking-based authentication schemes, and making assumptions about the feasibility of using each analyzed image transformation algorithm. To achieve these objectives, the following methods are employed: modeling – software implementation of each studied algorithm, empirical methods – application of algorithms and observation of transformation results, mathematical methods – calculation of normal correlation metrics and peak signal-to-noise ratio (PSNR). Results: an analysis was conducted on a set of algorithms that could potentially be used in zero-watermarking schemes for authentication purposes. A methodology was developed to evaluate algorithms while considering image dimensionality reduction due to compression. Additionally, requirements for image processing algorithms in zero-watermarking-based authentication were established. Conclusions: the study identified the most effective image transformation algorithms for use in zero-watermarking authentication schemes: DWT (Discrete Wavelet Transform), SVD (Singular Value Decomposition), DCT (Discrete Cosine Transform), and K-means clustering. For low-resolution images, DCT is a viable option. The most effective algorithm combinations are DWT + DCT and DWT + K-means, as these combinations ensure optimal robustness to noise while maintaining sensitivity to distinguish similar images. Future authentication schemes based on these algorithms may be useful (in combination with IoT devices), including for user authentication in enterprises and organizations.
- Open Access
- 28 February 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (9 (133)) , 35-48
Development of post-quantum cryptosystems based on the Rao-Nam scheme
The object of the research is the process of ensuring the protection of data transmission in communication channels of critical infrastructure objects based on mobile and smart technologies. The development of quantum computing technologies based on Grover and Shor algorithms provides practical cracking of symmetric and asymmetric cryptosystems in polynomial time. The emergence of systems based on artificial intelligence allows creating hybrid systems for detecting weaknesses (critical points) in security systems not only on critical infrastructure objects. In addition, a full-scale quantum computer will open a new era of implementing post-quantum cryptography algorithms. Among the winners of post-quantum algorithms, the crypto-code constructions (CCC) of McEliece and Niederreiter are separately highlighted, which allow to provide the required level of protection and the required level of reliability of information transmission in an integrated manner. But a significant drawback is the possibility of cracking such systems on linear codes, as well as the need to build them on the Galois field 210–213, which significantly reduces their use in low-capacity systems based on smart and mobile technologies. To solve this drawback, the work proposes the use of a symmetric CCC based on the Rao-Nam scheme on algebrogeometric and flawed codes, which provides the possibility of significantly reducing the volume of key data (construction of CCC over the Galois field 24–26). When using the Rao-Nam CCC, a quantum symmetric algorithm is formed, which ensures the preservation of the level of stability and reliability of information transmission (safe time 1025–1035). This approach provides the possibility of forming intelligent information protection systems (IIPS). The given structural scheme of the IIPS construction ensures timely detection of threats with an assessment of the computational and financial and human capabilities of attackers, as well as the use of the necessary CCC/algebraic (flawed) codes to ensure the required level of security
- 28 February 2025
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 1 (9 (133)) , 35-48
Open AccessDevelopment of post-quantum cryptosystems based on the Rao-Nam scheme
The object of the research is the process of ensuring the protection of data transmission in communication channels of critical infrastructure objects based on mobile and smart technologies. The development of quantum computing technologies based on Grover and Shor algorithms provides practical cracking of symmetric and asymmetric cryptosystems in polynomial time. The emergence of systems based on artificial intelligence allows creating hybrid systems for detecting weaknesses (critical points) in security systems not only on critical infrastructure objects. In addition, a full-scale quantum computer will open a new era of implementing post-quantum cryptography algorithms. Among the winners of post-quantum algorithms, the crypto-code constructions (CCC) of McEliece and Niederreiter are separately highlighted, which allow to provide the required level of protection and the required level of reliability of information transmission in an integrated manner. But a significant drawback is the possibility of cracking such systems on linear codes, as well as the need to build them on the Galois field 210–213, which significantly reduces their use in low-capacity systems based on smart and mobile technologies. To solve this drawback, the work proposes the use of a symmetric CCC based on the Rao-Nam scheme on algebrogeometric and flawed codes, which provides the possibility of significantly reducing the volume of key data (construction of CCC over the Galois field 24–26). When using the Rao-Nam CCC, a quantum symmetric algorithm is formed, which ensures the preservation of the level of stability and reliability of information transmission (safe time 1025–1035). This approach provides the possibility of forming intelligent information protection systems (IIPS). The given structural scheme of the IIPS construction ensures timely detection of threats with an assessment of the computational and financial and human capabilities of attackers, as well as the use of the necessary CCC/algebraic (flawed) codes to ensure the required level of security