Gelines Moreno-Fernández
Research Subjects
Gelines Moreno-Fernández has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Daniel Carriazo
Centre for Cooperative Research on Alternative Energies (CIC energiGUNE), Basque Research and Technology Alliance (BRTA), Alava Technology Park, Albert Einstein 48, 01510 Vitoria-Gasteiz, Spain
8 shared publications - José María Rojo
Instituto de Ciencia de Materiales de Madrid (ICMM) Consejo Superior de Investigaciones Científicas (CSIC) Sor Juana Inés de la Cruz, 3 Cantoblanco 28049- Madrid Spain
6 shared publications - Juan Luis Gómez-Urbano
Institute for Technical Chemistry and Environmental Chemistry Friedrich‐Schiller University Jena Philosophenweg 7a 07743 Jena Germany
6 shared publications J. Ibañez
Centro Nacional de Investigaciones Metalúrgicas (CENIM), CSIC, Av. Gregorio del Amo, 8, E-28040, Madrid, Spain
3 shared publications- Teresa A. Centeno
Instituto Nacional del Carbón (CSIC), Apartado 73, 33080 Oviedo, Spain
3 shared publications I. Llorente
Centro Nacional de Investigaciones Metalúrgicas (CENIM), CSIC, Av. Gregorio del Amo, 8, E-28040, Madrid, Spain
2 shared publications
Latest Publications
- Open Access
- 17 January 2023
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 7 (4) , 965-976
A high-energy hybrid lithium-ion capacitor enabled by a mixed capacitive-battery storage LiFePO 4 – AC cathode and a SnP 2 O 7 – rGO anode
In this work we present the development and optimization of a graphene-embedded Sn-based material and an activated carbon/lithium iron phosphate composite for a high-performing hybrid lithium-ion capacitor (LIC). For the negative electrode, we have synthesized and screened different tin and phosphorus-based graphene materials based on the chemical structure, morphology and particle size, selecting a composite consisting of nano-sized crystalline tin pyrophosphate (SnP2O7) particles embedded in a graphenic matrix. For the positive electrode, a composite combining a high-loading (40 wt%) faradaic material lithium iron phosphate (LFP) with a graphene-activated carbon was developed whereas other bi-material cathodes are limited to about 20 wt% of faradaic material. The homogeneous distribution of nanosized carbon-coated LFP particles along the graphene-activated carbon has enabled energy storage via faradaic, pseudocapacitive, and capacitive mechanisms. The optimized-electrode LIC delivers high energy densities and overcomes the main power limitations of LICs using high-content battery-type materials (143 Wh kg−1 at 128 W kg−1 and 45 Wh kg−1 at 25 000 W kg−1).
- 17 January 2023
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 7 (4) , 965-976
Open AccessA high-energy hybrid lithium-ion capacitor enabled by a mixed capacitive-battery storage LiFePO 4 – AC cathode and a SnP 2 O 7 – rGO anode
In this work we present the development and optimization of a graphene-embedded Sn-based material and an activated carbon/lithium iron phosphate composite for a high-performing hybrid lithium-ion capacitor (LIC). For the negative electrode, we have synthesized and screened different tin and phosphorus-based graphene materials based on the chemical structure, morphology and particle size, selecting a composite consisting of nano-sized crystalline tin pyrophosphate (SnP2O7) particles embedded in a graphenic matrix. For the positive electrode, a composite combining a high-loading (40 wt%) faradaic material lithium iron phosphate (LFP) with a graphene-activated carbon was developed whereas other bi-material cathodes are limited to about 20 wt% of faradaic material. The homogeneous distribution of nanosized carbon-coated LFP particles along the graphene-activated carbon has enabled energy storage via faradaic, pseudocapacitive, and capacitive mechanisms. The optimized-electrode LIC delivers high energy densities and overcomes the main power limitations of LICs using high-content battery-type materials (143 Wh kg−1 at 128 W kg−1 and 45 Wh kg−1 at 25 000 W kg−1).
- Open Access
- 18 May 2022
- Published by Wiley in Batteries & Supercaps
- Vol. 5 (9)
Graphene‐based Activated Carbon Composites for High Performance Lithium‐Sulfur Batteries
The increasing demand for electrical energy storage requires the exploration of alternative battery chemistries that overcome the limitations of the current state‐of‐the‐art lithium‐ion batteries. In this scenario, lithium‐sulfur batteries stand out for their high theoretical energy density. However, several inherent limitations still hinder their commercialization. In this work, we report the synthesis and study of two high‐performance activated carbon‐based materials that allow to overcome the most challenging limitations of sulfur electrodes, i. e., low electronic conductivity and the polysulfide shuttle effect. The two tailored nanomaterials are based on porous carbon structures mixed with conductive reduced graphene oxide, one derived from an organic waste and the other from an organic synthetic route. These structures not only feature excellent individual properties, but also present excellent performance when implemented in batteries, related to their superior conductivity and polysulfide trapping ability, allowing to obtain improved rate capacity and high sulfur loading cycling. Additionally, we demonstrate the scalability of the best performing material by the assembly of high‐performance pouch cells.
- 18 May 2022
- Published by Wiley in Batteries & Supercaps
- Vol. 5 (9)
Open AccessGraphene‐based Activated Carbon Composites for High Performance Lithium‐Sulfur Batteries
The increasing demand for electrical energy storage requires the exploration of alternative battery chemistries that overcome the limitations of the current state‐of‐the‐art lithium‐ion batteries. In this scenario, lithium‐sulfur batteries stand out for their high theoretical energy density. However, several inherent limitations still hinder their commercialization. In this work, we report the synthesis and study of two high‐performance activated carbon‐based materials that allow to overcome the most challenging limitations of sulfur electrodes, i. e., low electronic conductivity and the polysulfide shuttle effect. The two tailored nanomaterials are based on porous carbon structures mixed with conductive reduced graphene oxide, one derived from an organic waste and the other from an organic synthetic route. These structures not only feature excellent individual properties, but also present excellent performance when implemented in batteries, related to their superior conductivity and polysulfide trapping ability, allowing to obtain improved rate capacity and high sulfur loading cycling. Additionally, we demonstrate the scalability of the best performing material by the assembly of high‐performance pouch cells.
- Open Access
- 7 January 2022
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 6 (3) , 700-710
Microstructured nitrogen-doped graphene-Sn composites as a negative electrode for high performance lithium-ion hybrid supercapacitors
Herein, we report a simplistic single-step synthesis of nitrogen-doped graphene decorated with tin particles suitable as a negative (battery-type) electrode for lithium-ion hybrid capacitors. An activated carbon derived from a graphene–carbon composite is used as a positive (capacitor-type) electrode. The excellent features of the nitrogen-doped graphene matrix combined with the homogeneous distribution and high theoretical capacity (994 mA h g−1) of the submicrometer-sized tin particles lead to an improved performance of the negative electrode, especially at high current densities. An optimized dual-carbon lithium-ion capacitor with 2 : 1 positive to negative mass ratio delivers high energy and power densities (133 W h kg−1 at 142 W kg−1 and 51 W h kg−1 at 25 600 W kg−1). Furthermore, within a discharge time of 1 min, the device reaches 19 000 cycles with full capacity retention, delivering ca. 100 W h kg−1 at 5600 W kg−1.
- 7 January 2022
- Published by Royal Society of Chemistry (RSC) in Sustainable Energy & Fuels
- Vol. 6 (3) , 700-710
Open AccessMicrostructured nitrogen-doped graphene-Sn composites as a negative electrode for high performance lithium-ion hybrid supercapacitors
Herein, we report a simplistic single-step synthesis of nitrogen-doped graphene decorated with tin particles suitable as a negative (battery-type) electrode for lithium-ion hybrid capacitors. An activated carbon derived from a graphene–carbon composite is used as a positive (capacitor-type) electrode. The excellent features of the nitrogen-doped graphene matrix combined with the homogeneous distribution and high theoretical capacity (994 mA h g−1) of the submicrometer-sized tin particles lead to an improved performance of the negative electrode, especially at high current densities. An optimized dual-carbon lithium-ion capacitor with 2 : 1 positive to negative mass ratio delivers high energy and power densities (133 W h kg−1 at 142 W kg−1 and 51 W h kg−1 at 25 600 W kg−1). Furthermore, within a discharge time of 1 min, the device reaches 19 000 cycles with full capacity retention, delivering ca. 100 W h kg−1 at 5600 W kg−1.
- Open Access
- 15 February 2021
- Published by Wiley in Batteries & Supercaps
- Vol. 4 (3) , 386
Cover Feature: Phosphorus‐Functionalized Graphene for Lithium‐Ion Capacitors with Improved Power and Cyclability (Batteries & Supercaps 3/2021)
- 15 February 2021
- Published by Wiley in Batteries & Supercaps
- Vol. 4 (3) , 386
Open AccessCover Feature: Phosphorus‐Functionalized Graphene for Lithium‐Ion Capacitors with Improved Power and Cyclability (Batteries & Supercaps 3/2021)
- Open Access
- 30 November 2020
- Published by Wiley in Batteries & Supercaps
- Vol. 4 (3) , 469-478
Phosphorus‐Functionalized Graphene for Lithium‐Ion Capacitors with Improved Power and Cyclability
Herein, we report an easy approach for the preparation of graphene‐based materials suitable as electrodes for lithium‐ion capacitors (LICs). To the best of our knowledge, this is the first time that phosphorus‐functionalized graphene oxide (rGO800‐P) is used as negative (battery‐type) electrode in LICs technology. An activated carbon derived from the pyrolysis of graphene‐carbon composite served as positive (capacitor‐type) electrode. While phosphorus functionalization on the negative electrode enables fast Li+ kinetics during insertion/extraction processes, the flat‐shaped morphology, large surface area and proper pore size distribution of the positive electrode enhance the double‐layer formation. Full LICs optimization, oversizing the negative electrode allows operating in the extended voltage window of 1.5–4.5 V delivering high energy and power values (91 Wh kg−1AM at 145 W kg−1AM and 33 Wh kg−1AM at 26,000 W kg−1AM) without compromising the cycling performance (76 % capacitance retention after 10,000 cycles).
- 30 November 2020
- Published by Wiley in Batteries & Supercaps
- Vol. 4 (3) , 469-478
Open AccessPhosphorus‐Functionalized Graphene for Lithium‐Ion Capacitors with Improved Power and Cyclability
Herein, we report an easy approach for the preparation of graphene‐based materials suitable as electrodes for lithium‐ion capacitors (LICs). To the best of our knowledge, this is the first time that phosphorus‐functionalized graphene oxide (rGO800‐P) is used as negative (battery‐type) electrode in LICs technology. An activated carbon derived from the pyrolysis of graphene‐carbon composite served as positive (capacitor‐type) electrode. While phosphorus functionalization on the negative electrode enables fast Li+ kinetics during insertion/extraction processes, the flat‐shaped morphology, large surface area and proper pore size distribution of the positive electrode enhance the double‐layer formation. Full LICs optimization, oversizing the negative electrode allows operating in the extended voltage window of 1.5–4.5 V delivering high energy and power values (91 Wh kg−1AM at 145 W kg−1AM and 33 Wh kg−1AM at 26,000 W kg−1AM) without compromising the cycling performance (76 % capacitance retention after 10,000 cycles).
- Open Access
Graphene-coffee waste derived carbon composites as electrodes for optimized lithium ion capacitors
- Open Access
- 9 January 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (3) , 1486
Correction: Flat-shaped carbon–graphene microcomposites as electrodes for high energy supercapacitors
Correction for ‘Flat-shaped carbon–graphene microcomposites as electrodes for high energy supercapacitors’ by Gelines Moreno-Fernández et al., J. Mater. Chem. A, 2019, 7, 14646–14655.
- 9 January 2020
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 8 (3) , 1486
Open AccessCorrection: Flat-shaped carbon–graphene microcomposites as electrodes for high energy supercapacitors
Correction for ‘Flat-shaped carbon–graphene microcomposites as electrodes for high energy supercapacitors’ by Gelines Moreno-Fernández et al., J. Mater. Chem. A, 2019, 7, 14646–14655.
- Open Access
- 3 June 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (24) , 14646-14655
Flat-shaped carbon–graphene microcomposites as electrodes for high energy supercapacitors
Herein, we report a simple approach for the preparation of phosphate-functionalized carbonaceous graphene-based composites. The homogeneous deposition of a thin layer of phenolic resin on the surface of graphene oxide (GO) sheets was achieved using phosphoric acid as the polymerization catalyst and functionalization agent. Subsequent pyrolysis of the composite yielded homogeneous lamellar-shaped microstructured porous carbon–graphene composites combining enhanced molecular diffusion and high electron transfer. In order to elucidate the effect of GO and porosity on the supercapacitor performance, a graphene free sample and a KOH-activated composite were also prepared and tested in a two-electrode configuration using aqueous and organic electrolytes. It was found that the presence of GO and the KOH activation lead to an increase in the specific surface area combined with a progressive widening of the pores. As a result, the KOH-activated composite reached specific capacitances of 211 and 105 F g−1 when using 1 M H2SO4 and 1.5 M Et4NBF4 electrolytes, respectively. It was also found that phosphorus-functionalization of electrodes leads to an operating voltage of 1.3 V in the aqueous electrolyte, resulting in a considerable increase of the energy density of the cell. Finally, both non-activated and activated graphene-based composites provide excellent capacitance retention, energy and power densities and cycling stability.
- 3 June 2019
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 7 (24) , 14646-14655
Open AccessFlat-shaped carbon–graphene microcomposites as electrodes for high energy supercapacitors
Herein, we report a simple approach for the preparation of phosphate-functionalized carbonaceous graphene-based composites. The homogeneous deposition of a thin layer of phenolic resin on the surface of graphene oxide (GO) sheets was achieved using phosphoric acid as the polymerization catalyst and functionalization agent. Subsequent pyrolysis of the composite yielded homogeneous lamellar-shaped microstructured porous carbon–graphene composites combining enhanced molecular diffusion and high electron transfer. In order to elucidate the effect of GO and porosity on the supercapacitor performance, a graphene free sample and a KOH-activated composite were also prepared and tested in a two-electrode configuration using aqueous and organic electrolytes. It was found that the presence of GO and the KOH activation lead to an increase in the specific surface area combined with a progressive widening of the pores. As a result, the KOH-activated composite reached specific capacitances of 211 and 105 F g−1 when using 1 M H2SO4 and 1.5 M Et4NBF4 electrolytes, respectively. It was also found that phosphorus-functionalization of electrodes leads to an operating voltage of 1.3 V in the aqueous electrolyte, resulting in a considerable increase of the energy density of the cell. Finally, both non-activated and activated graphene-based composites provide excellent capacitance retention, energy and power densities and cycling stability.
- 19 November 2018
- Published by Elsevier in Electrochimica Acta
- Vol. 296, 1166-1167
Reply to “Comments on ‘Electrochemical study of tetraalkylammonium tetrafluoroborate electrolytes in combination with microporous and mesoporous carbon monoliths’ [Electrochimica Acta 268 (2018) 121–130]” by Teresa A.A. Centeno [Electrochim. Acta 296 (2019) 1163–1165]
- 19 November 2018
- Published by Elsevier in Electrochimica Acta
- Vol. 296, 1166-1167
Reply to “Comments on ‘Electrochemical study of tetraalkylammonium tetrafluoroborate electrolytes in combination with microporous and mesoporous carbon monoliths’ [Electrochimica Acta 268 (2018) 121–130]” by Teresa A.A. Centeno [Electrochim. Acta 296 (2019) 1163–1165]
- 1 April 2018
- Published by Elsevier in Electrochimica Acta
- Vol. 268, 121-130
Electrochemical study of tetraalkylammonium tetrafluoroborate electrolytes in combination with microporous and mesoporous carbon monoliths
- 1 April 2018
- Published by Elsevier in Electrochimica Acta
- Vol. 268, 121-130
Electrochemical study of tetraalkylammonium tetrafluoroborate electrolytes in combination with microporous and mesoporous carbon monoliths