Qiang Li
Qiang Li has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
Hua Zhang
Zotye Holding Group Co., Ltd., Hangzhou 310052, China
1 shared publicationJian Wu
School of Mechanical & Automotive Engineering
1 shared publicationRui Huang
Power Machinery & Vehicular Engineering Institute, Zhejiang University, Hangzhou 310027, China
1 shared publicationXiao-Li Yu
Power Machinery & Vehicular Engineering Institute, Zhejiang University, Hangzhou 310027, China
1 shared publication- Xiaoli Yu
Power Machinery & Vehicular Engineering Institute
1 shared publication
Latest Publications
- Open Access
- 20 February 2018
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2018, 1-8
An Improved Genetic Algorithm to Optimize Spatial Locations for Double-Wishbone Type Suspension System with Time Delay
By taking account of double-wishbone independent suspension with two unequal-length arms, the coordinate values of articulated geometry are based on structural limitations and constraint equations of alignment parameters. The sensitivities of front wheel alignment parameters are analyzed using the space analytic geometry method with insight module in ADAMS® software. The multiobjective optimization functions are designed to calculate the coordinate values of hardpoints with front suspension since the effect of time delay due to wheelbase can be easily obtained by vehicle speed. The K&C characteristics have been investigated using GA solutions in the simulation environment. The camber angle decreases from 1.152° to 1.05° and toe-in angle reduces from 1.036° to 0.944°. The simulation results demonstrate that the suggested optimization method is able to satisfy the suspension motion to enhance ride comfort. Experimental results, obtained by K&C test bench, also indicate that the optimized suspension can track the desired trajectory while keeping the vehicle performance in various road conditions.
- 20 February 2018
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2018, 1-8
Open AccessAn Improved Genetic Algorithm to Optimize Spatial Locations for Double-Wishbone Type Suspension System with Time Delay
By taking account of double-wishbone independent suspension with two unequal-length arms, the coordinate values of articulated geometry are based on structural limitations and constraint equations of alignment parameters. The sensitivities of front wheel alignment parameters are analyzed using the space analytic geometry method with insight module in ADAMS® software. The multiobjective optimization functions are designed to calculate the coordinate values of hardpoints with front suspension since the effect of time delay due to wheelbase can be easily obtained by vehicle speed. The K&C characteristics have been investigated using GA solutions in the simulation environment. The camber angle decreases from 1.152° to 1.05° and toe-in angle reduces from 1.036° to 0.944°. The simulation results demonstrate that the suggested optimization method is able to satisfy the suspension motion to enhance ride comfort. Experimental results, obtained by K&C test bench, also indicate that the optimized suspension can track the desired trajectory while keeping the vehicle performance in various road conditions.
- Open Access
- 22 December 2015
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2015, 1-8
Study on Differential Assist Steering System with Double In-Wheel Motors with Intelligent Controller
The purpose of this paper is to present a novel controller of differential assist steering system. Firstly, the integrated controller module in electric vehicle is investigated, in which the front axle is refitted for two in-wheel motors. Secondly, genetic algorithm is used to optimize the control decision-making rules of fuzzy controller. Thereafter, the built model is embedded in veDYNA development environment with an offline simulation test of driver/vehicle/road closed-loop system. At last, control strategy, which has been compiled and downloaded to Mirco AutoBox controller prototype, is used for the real vehicle experimental analysis and validation of the proposed controller. Both simulation and experimental results demonstrate that the controller can improve the yaw motion and reduce the slip angle of vehicle. Here, the vehicle is equipped with the in-wheel motors on both sides. At the same time, the controller cannot only track the steering torque indication of driving current, but also preferably maintain the steering assist handle. Furthermore, it can bring about a good road feeling to the driver because of the reduced torque fluctuation.
- 22 December 2015
- Published by Wiley in Mathematical Problems in Engineering
- Vol. 2015, 1-8
Open AccessStudy on Differential Assist Steering System with Double In-Wheel Motors with Intelligent Controller
The purpose of this paper is to present a novel controller of differential assist steering system. Firstly, the integrated controller module in electric vehicle is investigated, in which the front axle is refitted for two in-wheel motors. Secondly, genetic algorithm is used to optimize the control decision-making rules of fuzzy controller. Thereafter, the built model is embedded in veDYNA development environment with an offline simulation test of driver/vehicle/road closed-loop system. At last, control strategy, which has been compiled and downloaded to Mirco AutoBox controller prototype, is used for the real vehicle experimental analysis and validation of the proposed controller. Both simulation and experimental results demonstrate that the controller can improve the yaw motion and reduce the slip angle of vehicle. Here, the vehicle is equipped with the in-wheel motors on both sides. At the same time, the controller cannot only track the steering torque indication of driving current, but also preferably maintain the steering assist handle. Furthermore, it can bring about a good road feeling to the driver because of the reduced torque fluctuation.