Dajun Yuan

Dajun Yuan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Dajun Yuan has a total of 76 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A novel three-dimensional mechanical model for rotary cutting in soil considering wear status and its experimental verification

    by Xiang Shen, Dajun Yuan, Jun Wu, Tong Qiu, Xiangsheng Chen, Dalong Jin, Jiuqi Wu


  • Open Access

    DSNet: A Computer Vision‐Based Detection and Corrosion Segmentation Network for Corroded Bolt Detection in Tunnel

    by Lei Tan, Xiaohan Chen, Dajun Yuan, Tao Tang

    Corroded bolt detection has been confirmed as a major issue in the structure health monitoring (SHM) of tunnels. However, detection‐only methods will miss the corroded bolts, arising from the small rust area. In this study, the task is divided ingeniously into two parallel tasks, i.e., bolt detection and pixel‐level rust segmentation, and the objective is fulfilled by taking the intersection of the two tasks, with the aim of enhancing the performance. To be specific, a detection and segmentation network (DSNet) is proposed based on multitask learning, leading to reduced false and missed detection rates. The coordinate attention module enhancing the focus of bolts in tunnel patches is incorporated in the detection branch, and the cross‐stage partial‐based decoder which can more accurately determine whether a pixel pertains to the corrosion area is employed in the segmentation branch. The mentioned branches share the same backbone to simplify the model. Sufficient comparisons and ablation experiments are performed to prove the superiority of the proposed algorithm based on the corroded bolt dataset captured from a real subway tunnel, which is publicly available in https://github.com/StreamHXX/Tunnel-lining-disease-image.


  • Open Access

    Centrifuge Model Tests on the Effects of Navigable Channel Excavation and Seawall Construction on a Subsea Shield Tunnel Below

    by Xiaoyu Wang, Dajun Yuan, Weiping Luo, Song Zhang, Huixi Liu

    As subsea shield tunnels are becoming increasingly popular, especially in coastal or river cities, the complicated construction environment poses multiple challenges that need to be addressed to ensure their safety and reliable operation. This study presents the results of centrifuge model tests that aimed to examine the impacts of navigable channel excavation and seawall construction on the deformation and forces acting on a subsea shield tunnel. The symmetry of the tunnel structure, as well as the loading and unloading effects from channel excavation and seawall construction in this engineering project, allow for the simplification of the problem. The centrifuge test model included a novel device to simulate the unloading action of channel excavation and the loading impact from seawall construction. The structural response of the tunnel was monitored using an innovative solution, and various parameters such as vertical displacement, opening of the circumferential joint, circumferential bending moment, and longitudinal stress were analyzed. The results reveal that both channel excavation and seawall construction have significant effects on the stress and deformation of the pre-existing tunnel. While the excavation of the navigable channel reduces the load on the tunnel from the overlying strata, resulting in uplifts in the tunnel structure around the excavation area, and the construction of the seawall causes settlement of the tunnel near the loading zone. The unloading effect of channel excavation leads to the opening tendency of the tunnel circumferential joints, while the loading effect of seawall construction has the opposite effect on the tunnel circumferential joints. The excavation of the channel induces tensile stresses on the tunnel crown around the loading zone, while the seawall construction causes significant compressive stresses on the tunnel crown around the loading zone. It is crucial to prioritize safety and ensure the tunnel’s load-bearing capacity through careful design and construction considerations in practical engineering. The study can guide the design and construction of future projects and help minimize the risk of damage to pre-existing structures.

  • Open Access

    Shield Attitude Adjustment Induced by Slurry Pressure Balance (SPB) Shield Tunneling Considering the Effects of Overbreak Cutter: A Numerical Simulation by DEM and Engineering Application

    by Xiang Shen, Dajun Yuan, Dalong Jin, Xiao Wang, Xiangsheng Chen

    Based on a cross-river tunnel of Wuhan Metro Line 8, we present a two-dimensional discrete element model for shield attitude adjustment considering the effect of overbreak cutters. The shield shell mechanics under the influence of over-excavation rate, over-excavation orientations, and overburden load are simulated, and the tunneling mechanics law and the ultimate range during the adjustment of the shield attitude are investigated. The simulation results indicate the following: (1) The greater the over-excavation rate, the smaller the force exerted by the soil layer in the negative direction of the shield movement; therefore, increasing the over-excavation rate is helpful in expanding the range of shield attitude adjustment. (2) The shield is stressed symmetrically while conducting positive and negative horizontal adjustments in the soil layer, which has a symmetrical distribution, but vertical upward adjustment is more difficult than vertical downward adjustment. (3) With the increase in overburden load, the space of the shield attitude adjustment is gradually reduced at the same over-excavation rate. A good engineering application was achieved in this project using the simulation model. It is recommended to use the attitude adjustment method by controlling the tunneling parameters. In difficult situations such as high overlying loads, the over-excavation cutter can be used to assist in adjusting the shield attitude.


  • Open Access

    Research on the Interaction between the Pile and Shield Machine in the Process of Cutting a Reinforced Concrete Pile Foundation

    by Xiaoyu Wang, Dajun Yuan

    As the urban underground space environment gets more complex, the cases of shield machines encountering and cutting through piles are becoming more common. The interaction between the cutter head and pile foundation directly affects the tunneling performance of the shield machine and the safety of the existing structure. To study the interaction between the pile and the shield machine, a calculation model of the interaction force is established. A field test of cutting two piles was conducted and the rationality of the model is verified by comparing the calculation results with field test data. The model is applied in the project of a shield machine cutting bridge piles in Harbin Metro Line 3, China. The shield operation parameters are predicted and compared with field test results. Besides, the impacts of cutting surface width and eccentric distance on interaction force are discussed. The study shows that there is a significant interaction between the cutter head and the piles when the shield machine cuts reinforced concrete piles, which causes obvious changes in the shield operation parameters and shield performance. The number of tools that are inside the cutting area has a significant effect on the additional torque. The additional torque fluctuates with the rotation of cutter head and increases with the increase of the number of tools. The number of these tools is determined by factors such as the layout of tools in the cutter head, cutting surface width and eccentric distance, which influence the position of each tool relative to the cutting area. As the cutting distance increase, the additional torque of the cutter head shows a trend of first increasing and then decreasing and reaches the maximum value when the cutting distance reaches the radius of the pile. Besides, the additional force and additional moment of the cutter head increase with the increase of the cutting surface width. The impacts of eccentric distance on additional force and additional moment are complicated. The results in this paper can provide reference for similar engineering.


  • Open Access

    Effect of the Geometric Configuration of the Disc Cutter on the Cutting Behaviour in Tunneling

    by Yixin Duan, Dajun Yuan, Jun Wu, Xiaojie Deng, Bing Wu, Zhangang Sun

    The disc cutter is a key tool in shield machines that come into direct contact with rock while participating in the removal of rock. Therefore, the reasonable design of the geometric configuration of disc cutters greatly determines the tunnelling efficiency of the shield machine. In this paper, the factors influencing the rock-breaking behaviour of disc cutters are studied. Firstly, to ensure the accuracy of the rock-breaking simulation, the parameters of the Holmquist–Johnson–Cook model of the diorite in the Jinan area were determined. Secondly, using ANSYS/LS-DYNA to simulate the rock-breaking process, the influence of the geometric configuration, including blade width and blade fillet, on rock-breaking behaviour was analysed. The results show that with increasing depth of penetration, the contact force increases approximately linearly. The contact force and the rock-breaking influence range gradually decrease with increasing number of blade fillets. In addition, with increasing number of blade fillets, the shape of the influence range gradually transitions from an approximate circle to a trapezoid, and finally to a triangle. With increasing blade width, the contact force and the rock-breaking influence range both increase, but the shape of the influence range remains largely unchanged as a trapezoid. On the basis of these research results, this paper gives some suggestions for the selection and configuration of disc cutters in different strata, which can give some guidance for practical engineering.


  • Open Access

    An Ensemble Learning Aided Computer Vision Method with Advanced Color Enhancement for Corroded Bolt Detection in Tunnels

    by Lei Tan, Tao Tang, Dajun Yuan

    Bolts, as the basic units of tunnel linings, are crucial to safe tunnel service. Caused by the moist and complex environment in the tunnel, corrosion becomes a significant defect of bolts. Computer vision technology is adopted because manual patrol inspection is inefficient and often misses the corroded bolts. However, most current studies are conducted in a laboratory with good lighting conditions, while their effects in actual practice have yet to be considered, and the accuracy also needs to be improved. In this paper, we put forward an Ensemble Learning approach combining our Improved MultiScale Retinex with Color Restoration (IMSRCR) and You Only Look Once (YOLO) based on truly acquired tunnel image data to detect corroded bolts in the lining. The IMSRCR sharpens and strengthens the features of the lining pictures, weakening the bad effect of a dim environment compared with the existing MSRCR. Furthermore, we combine models with different parameters that show different performance using the ensemble learning method, greatly improving the accuracy. Sufficient comparisons and ablation experiments based on a dataset collected from the tunnel in service are conducted to prove the superiority of our proposed algorithm.