Sergio González-Egido

This study assessed the effect of soil amendment with biochar on the production of some Mediterranean crops. Pine-derived biochar (B1) and partially pyrolyzed pine-derived biochar (B2) were used with a dose of 8 L/m² in a corn crop, reporting a production increase of 38–270% over three years with B1, and no effect of B2 due to its poor quality. Olive stone-derived biochar (B3) was used in lavandin and vineyard crops with doses of 0.04–0.9 L/m² and 0.37–2.55 L/m², respectively. An increase of 23–25% in plant volume of lavandin was reported, while the production of grapes per plant was not significantly altered, although it increased by up to 66%. Soil analysis indicated that biochar does not significantly alter soil physicochemical parameters; therefore, biochar may affect plants by altering soil structure and increasing its cation exchange capacity and water management efficiency. Depending on its price, biochar application may be profitable for lavandin and corn crops, with a return-on-investment period ranging from 1 to 4 years. However, the profitability of its use in vineyards is questionable, particularly for the varieties with the lowest market price. Studies examining the economics of biochar application indicate that CO₂ abatement certification may help in covering biochar application costs.

The effects of biochar on different horticultural crops (lettuce, tomato, sweet pepper, and radish) were evaluated in the Mediterranean climate. Biochar was produced by pyrolysis of Pinus pinaster wood chips at 550 °C and used at 1 (B1) and 2 (B2) kg/m² application rates on six 3.5 m² plots in each treatment, with two control plots (B0). No fertilizer was used. Treatment B1 led to a significant increase (p < 0.01) of 35.4%, 98.1%, 28.4%, and 35.2% in the mean fresh weight of radishes, lettuce, tomatoes, and sweet peppers, respectively. Treatment B2 resulted in an improvement of 70.7% in radishes, 126.1% in lettuce, 38.4% in tomatoes, and 95.0% in sweet peppers (p < 0.01). Significant differences between treatments B1 and B2 were observed in the radish, tomato, and sweet pepper crops but not in lettuce. The profitability of biochar application to these crops was studied by considering a biochar price of 800 EUR/t and applying a CO₂ fixation subsidy, assuming the updated February 2022 price (90 EUR/t). In lettuce, tomato, and sweet pepper crops, the investment payback period was approximately one year. Application of biochar generated economic benefit either from the first harvest or in the second year. In radish, this period was longer than two years; however, an increase in the annual frequency of cultivation should be studied to optimize the benefit. The dose that provided the greatest benefit was B1 (for all crops, except for sweet pepper). Biochar considerably improved fruit and vegetable yield under the Mediterranean climate; however, further studies are needed to assess the effects of biochar on soil properties and yield to estimate long-term environmental and economic benefits.

The processing of leather into leather is one of the oldest known manufacturing practices. The subsequent refinement of this technique over recent centuries has led to an increase in production, which in turn has led to an increase in waste production. Today, many of the by-products and waste streams from the leather industry have applications in industries such as petfood and in the production of collagen and derivatives, while others, such as waste from trimming and scraping the material, are disposed of in landfills, causing a detrimental environmental impact. For this reason, new alternatives for the treatment of these wastes, such as pyrolysis, are being investigated. The aim of this work is to assess the feasibility of recovering non-recyclable waste from the leather industry by pyrolysis. Waste from the tanning of cowhides with vegetable tannins and tanning with chrome salts, without pre-treatment, were used as raw materials. The operating conditions of the microwave-assisted pyrolysis were analysed by varying the time (15–30 min), the power (600–1000 W) and the dopant (carbon from the pyrolysis itself) in a batch reactor that allows to treat about 30 g of a sample. Three fractions (liquid, solid and gaseous) were obtained from the waste treatment, and the liquid and gaseous fractions were characterised using different analytical techniques. The solid fraction can be used as fuel due to its high calorific value of more than 20 MJ/kg and its low ash content, with the residue containing vegetable tannins giving the best results with a calorific value of up to 28 MJ kg⁻¹. In addition, the solid fraction can be used as activated carbon after activation treatment, which allows for a more technical use, e.g., in the chemical industry. The liquid fraction contains significant amounts of phenolic groups, such as pyrrole and phenol, as well as other derivatives. Pyridine, aniline, cresol and succinimide, among others, were also found. This makes it a valid source of chemical compounds of high added value in the chemical industry. In addition, the heavy liquid fraction has a good heat capacity of more than 21 MJ/kg, which makes it suitable for use as a fuel. The microwave-assisted pyrolysis process results in the possibility of obtaining products from waste that would otherwise be destined for landfill, thereby obtaining a large number of products and bioproducts with the ability to be reintroduced into the value chain quickly and easily.

The effects of two types of biochar on corn production in the Mediterranean climate during the growing season were analyzed. The two types of biochar were obtained from pyrolysis of Pinus pinaster. B1 was fully pyrolyzed with 55.90% organic carbon, and B2 was medium pyrolyzed with 23.50% organic carbon. B1 and B2 were supplemented in the soil of 20 plots (1 m²) at a dose of 4 kg/m². C1 and C2 (10 plots each) served as control plots. The plots were automatically irrigated and fertilizer was not applied. The B1-supplemented plots exhibited a significant 84.58% increase in dry corn production per square meter and a 93.16% increase in corn wet weight (p << 0.001). Corn production was no different between B2-supplemented, C1, and C2 plots (p > 0.01). The weight of cobs from B1-supplemented plots was 62.3%, which was significantly higher than that of cobs from C1 and C2 plots (p < 0.01). The grain weight increased significantly by 23% in B1-supplemented plots (p < 0.01) and there were no differences between B2-supplemented, C1, and C2 plots. At the end of the treatment, the soil of the B1-supplemented plots exhibited increased levels of sulfate, nitrate, magnesium, conductivity, and saturation percentage. Based on these results, the economic sustainability of this application in agriculture was studied at a standard price of €190 per ton of biochar. Amortization of this investment can be achieved in 5.52 years according to this cost. Considering the fertilizer cost savings of 50% and the water cost savings of 25%, the amortization can be achieved in 4.15 years. If the price of biochar could be reduced through the CO₂ emission market at €30 per ton of non-emitted CO₂, the amortization can be achieved in 2.80 years. Biochar markedly improves corn production in the Mediterranean climate. However, the amortization time must be further reduced, and enhanced production must be guaranteed over the years with long term field trials so that the product is marketable or other high value-added crops must be identified.

Lignocellulosic biomass pyrolysis could be an economically feasible option for forest management as it reduces the need to burn litter and helps in fire prevention thus avoiding the release of carbon dioxide and other greenhouse gases into the atmosphere. This study characterises wood vinegar (WV) obtained via a continuous fast pyrolysis process in terms of its composition, ageing and herbicidal properties. The aqueous WV fraction had a moisture content of 84% in weight and contained more than 200 compounds. Acetic acid, hydroxyacetaldehyde and hydroxyacetone were the major components. No significant differences were found in WV composition according to the starting material (poplar, pine, pruning litter, forest waste). No residual aromatic polycyclic compounds that could be harmful to the environment were detected. In a series of climate-controlled glass chamber experiments, the WV proved to be as effective an inhibitor of seed germination and seedling growth as a contact herbicide acting against weeds, especially through aerial contact. Sprayed WV concentrations of 50, 75 and 100 vol. % were effective against all plant species tested. This product could therefore be of commercial interest and help make biomass pyrolysis economically viable, once environmental exposure limits and the safe application for agricultural and urban use of this product have been established.