Linards Goldšteins
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Linards Goldšteins has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Alexandr Arshanitsa
Latvian State Institute of Wood Chemistry, Dzerbenes Street 27, LV-1006 Riga, Latvia
3 shared publications - Maija Zaķe
Institute of Physics, University of Latvia, Miera Str. 32, LV-2169 Salaspils, Latvia
3 shared publications - Raimonds Valdmanis
Institute of Physics, University of Latvia, Miera Str. 32, LV-2169 Salaspils, Latvia
3 shared publications - Māris Gunārs Dzenis
Institute of Physics, University of Latvia, Miera Str. 32, LV-2169 Salaspils, Latvia
2 shared publications Anatolijs Ziks
Institute of Physics, University of Latvia Latvia
1 shared publication- Anna Andersone
SIA “EkoKompozit”, Skolas str. 13-7, LV-2121 Salaspils, Latvia
1 shared publication
Latest Publications
- Open Access
Microwave Pre-Treatment and Blending of Biomass Pellets for Sustainable Use of Local Energy Resources in Energy Production
In the present study analysis of co-firing microwave (MW) pre-treated biomass pellets of different origins (wood and wheat straw), with raw pellets (wood, straw, and peat), to control and improve thermochemical conversion of biomass blends and achieve a sustainable use of local energy resources in energy production has been carried out. Effects of MW pre-treatment regimes and composition of blends were studied experimentally using measurements of the weight loss of blends, the yield of volatiles, flame temperature, total heat output from the device, and composition of products. It was found that co-firing MW pre-treated and raw biomass pellets promotes synergistic interaction between components of blends by increasing mass loss rate, the intensity of which depends on the proximate composition of pellets, MW pre-treatment regime and mass fraction of pre-treated pellets in the blend. The most effective synergistic interaction was found when co-firing pre-treated straw or wood pellets with raw peat, which increased the yield of combustible volatiles and heat output from the device as well as improved the composition of emissions. The least effective synergistic interaction was observed when co-firing pre-treated straw with raw wood pellets. Main factors that influenced the thermal and chemical conversion of MW pre-treated blends are discussed considering the effects of MW pre-treatment on the structural changes, elemental and chemical composition, and heating value of pre-treated pellets.
Open AccessMicrowave Pre-Treatment and Blending of Biomass Pellets for Sustainable Use of Local Energy Resources in Energy Production
In the present study analysis of co-firing microwave (MW) pre-treated biomass pellets of different origins (wood and wheat straw), with raw pellets (wood, straw, and peat), to control and improve thermochemical conversion of biomass blends and achieve a sustainable use of local energy resources in energy production has been carried out. Effects of MW pre-treatment regimes and composition of blends were studied experimentally using measurements of the weight loss of blends, the yield of volatiles, flame temperature, total heat output from the device, and composition of products. It was found that co-firing MW pre-treated and raw biomass pellets promotes synergistic interaction between components of blends by increasing mass loss rate, the intensity of which depends on the proximate composition of pellets, MW pre-treatment regime and mass fraction of pre-treated pellets in the blend. The most effective synergistic interaction was found when co-firing pre-treated straw or wood pellets with raw peat, which increased the yield of combustible volatiles and heat output from the device as well as improved the composition of emissions. The least effective synergistic interaction was observed when co-firing pre-treated straw with raw wood pellets. Main factors that influenced the thermal and chemical conversion of MW pre-treated blends are discussed considering the effects of MW pre-treatment on the structural changes, elemental and chemical composition, and heating value of pre-treated pellets.
- Open Access
Thermo-Chemical Conversion of Microwave Selectively Pre-Treated Biomass Blends
Possibilities of more efficient use of regional lignocellulosic resources (wood, wheat straw, peat) of different origin for an environmentally friendly energy production using selectively MW pre-treated blends of commercial wood or wheat straw pellets with raw peat pellets are studied. A hypothesis is proposed and tested that selective MW pre-treatment of wood or wheat straw pellets at the frequency 2.45 GHz and blending of MW pre-treated pellets with raw peat pellets can be used to enhance and control the thermo-chemical conversion of biomass blends. To test this hypothesis, a combined experimental study and mathematical modelling of the processes were performed. The thermo-chemical conversion of selectively activated blends was experimentally studied using a batch-size pilot device, which consists of a biomass gasifier and a combustor. To evaluate the effect of selective MW pre-treatment of biomass pellets on the thermo-chemical conversion of pre-treated blends, measurements of the kinetics of weight loss, yield of combustible volatiles, flame temperature, heat output of the device, and composition of emissions were made at different MW pre-treatment regimes of wheat straw and wood pellets and different mass fractions of pre-treated pellets in biomass blends. The developed novel 2D numerical model of thermo-chemical conversion of MW pre-treated straw confirmed that the pre-treatment of wheat straw pellets increases the generated heat and significantly affects the temperature distribution in the flame/bed zones. It was confirmed that MW pre-treatment leads to a faster thermal decomposition of biomass pellets, synergistically activating the non-treated parts of blends. The overall improved yield of combustible volatiles and their complete combustion provide a surplus of heat production by limiting the formation of GHG emissions, which allows promoting MW pre-treated biomass of different origin as efficient regional bioenergy resources for energy production.
Open AccessThermo-Chemical Conversion of Microwave Selectively Pre-Treated Biomass Blends
Possibilities of more efficient use of regional lignocellulosic resources (wood, wheat straw, peat) of different origin for an environmentally friendly energy production using selectively MW pre-treated blends of commercial wood or wheat straw pellets with raw peat pellets are studied. A hypothesis is proposed and tested that selective MW pre-treatment of wood or wheat straw pellets at the frequency 2.45 GHz and blending of MW pre-treated pellets with raw peat pellets can be used to enhance and control the thermo-chemical conversion of biomass blends. To test this hypothesis, a combined experimental study and mathematical modelling of the processes were performed. The thermo-chemical conversion of selectively activated blends was experimentally studied using a batch-size pilot device, which consists of a biomass gasifier and a combustor. To evaluate the effect of selective MW pre-treatment of biomass pellets on the thermo-chemical conversion of pre-treated blends, measurements of the kinetics of weight loss, yield of combustible volatiles, flame temperature, heat output of the device, and composition of emissions were made at different MW pre-treatment regimes of wheat straw and wood pellets and different mass fractions of pre-treated pellets in biomass blends. The developed novel 2D numerical model of thermo-chemical conversion of MW pre-treated straw confirmed that the pre-treatment of wheat straw pellets increases the generated heat and significantly affects the temperature distribution in the flame/bed zones. It was confirmed that MW pre-treatment leads to a faster thermal decomposition of biomass pellets, synergistically activating the non-treated parts of blends. The overall improved yield of combustible volatiles and their complete combustion provide a surplus of heat production by limiting the formation of GHG emissions, which allows promoting MW pre-treated biomass of different origin as efficient regional bioenergy resources for energy production.
- Open Access
Thermal Decomposition and Combustion of Microwave Pre-Treated Biomass Pellets
The objective of the study was to investigate a more effective use of commercially available biomass pellets (wheat straw, wood, peat) using microwave pretreatment to improve heat production. Pellets were pretreated using the originally designed microwave torrefaction device. The effects of microwave (mw) pretreatment were quantified, providing measurements of the weight loss and elemental composition of pellets and estimating the effect of mw pretreatment on their porosity, surface area and calorific values at pretreatment temperatures of T = 448–553 K. Obtained results show that the highest structural variations and elemental composition during mw pretreatment were obtained for wheat straw pellets, with an increase in reactivity, a decreasing in the duration of the thermal decomposition by about 40% and an increase in the yield of combustible volatiles. Increased reactivity of pretreated pellets enhanced the ignition and burnout of volatiles, decreasing the duration of the burnout of pretreated wheat straw, wood and peat pellets by 40%, 24% and 9%, respectively, and increasing the peak and average values of the flame temperature, heat output, and produced heat energy by 40–50%, with a correlating increase of combustion efficiency and the mass fraction of carbon-neutral CO2 emission. Thus, the applicability of microwave pretreatment for the control and improvement of heat production was confirmed.
Open AccessThermal Decomposition and Combustion of Microwave Pre-Treated Biomass Pellets
The objective of the study was to investigate a more effective use of commercially available biomass pellets (wheat straw, wood, peat) using microwave pretreatment to improve heat production. Pellets were pretreated using the originally designed microwave torrefaction device. The effects of microwave (mw) pretreatment were quantified, providing measurements of the weight loss and elemental composition of pellets and estimating the effect of mw pretreatment on their porosity, surface area and calorific values at pretreatment temperatures of T = 448–553 K. Obtained results show that the highest structural variations and elemental composition during mw pretreatment were obtained for wheat straw pellets, with an increase in reactivity, a decreasing in the duration of the thermal decomposition by about 40% and an increase in the yield of combustible volatiles. Increased reactivity of pretreated pellets enhanced the ignition and burnout of volatiles, decreasing the duration of the burnout of pretreated wheat straw, wood and peat pellets by 40%, 24% and 9%, respectively, and increasing the peak and average values of the flame temperature, heat output, and produced heat energy by 40–50%, with a correlating increase of combustion efficiency and the mass fraction of carbon-neutral CO2 emission. Thus, the applicability of microwave pretreatment for the control and improvement of heat production was confirmed.
- 8 July 2020
- Published by SAGE Publications in International Journal of Applied Electromagnetics and Mechanics
- Vol. 63 (Preprint) , S93-S100
Numerical and experimental study of a niobium reactor preheating for titanium production by a vapor-phase reduction
The paper aims to optimize niobium reactor electrical heating in deep vacuum conditions towards to original process of titanium production using vapour-phase reduction. The study aims to explore optimal electrical heating power of tungsten heater sur
- 8 July 2020
- Published by SAGE Publications in International Journal of Applied Electromagnetics and Mechanics
- Vol. 63 (Preprint) , S93-S100
Numerical and experimental study of a niobium reactor preheating for titanium production by a vapor-phase reduction
The paper aims to optimize niobium reactor electrical heating in deep vacuum conditions towards to original process of titanium production using vapour-phase reduction. The study aims to explore optimal electrical heating power of tungsten heater sur