GJG. Jeevarathinam

G. Jeevarathinam

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


G. Jeevarathinam has a total of 136 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Advances in hybrid solar–infrared drying for food processing: Comparative design, energy performance, and quality evaluation

    by S. Murali, D.S. Aniesrani Delfiya, K.C. Neethu, P.V. Alfiya, G. Jeevarathinam, Bogala Madhu, Zhongli Pan

    1. Drying is one of the most widely applied unit operations in food and agricultural processing, enabling shelf-life extension through moisture removal and suppression of microbial, enzymatic, and ...

  • Valorization of coir pith for cellulose‐based polymer composites: Properties, modification strategies, processing, and applications

    by Veerapandi Loganathan, R. Rahul, J. Deepa, Punit Singh, R. Sinthiya, Vismaya K. Sachithanandhan, S. Dinesh Kumar, Davinder Pal Singh Oberoi, Sarvesh Rustagi, G. Jeevarathinam

    The global demand for sustainable, biodegradable, and economically viable alternatives to synthetic materials has intensified the research into plant‐based waste resources. Coir pith is a lignocellulosic byproduct generated during the extraction of coir fiber from coconut husks which remains largely underutilized. It is traditionally discarded or minimally used as low‐value mulch or compost. Coir pith is mostly accumulated near processing facilities posing environmental challenges due to land occupation and unmanaged degradation. The intrinsic properties such as high cellulose content, low bulk density, biodegradability, water retention capacity, and tensile strength make it an attractive value‐added material, particularly cellulose‐based polymer composite. This review provides a comprehensive analysis of the valorization of coir pith focusing on its transformation into functional materials through chemical, physical, and biological modifications. The main consideration is given to the pre‐treatment and surface modification techniques aimed at enhancing the interfacial adhesion between coir‐derived cellulose and polymer matrices. This review outlines the methods for isolating cellulose and developing composites with thermoplastic and thermosetting polymers. The resultant composites exhibit improved mechanical strength, thermal stability, durability, and environmental performance. The recent applications of coir pith‐based composites are critically reviewed, including their use in automotive interior components, building materials, biodegradable packaging, agricultural tools such as geotextiles, soil stabilizers, etc. This review highlights the potential of coir pith as a sustainable reinforcement material through a thorough evaluation of the material's properties, preparation techniques, and practical applications. It also outlines future research directions to advance its industrial utilization and promote circular economy practices in the agro‐industrial sector.

  • Effects of Infrared, Hot Air and Infrared‐Assisted Hot Air‐Drying on Drying Characteristics, Quality, and Energy Efficiency of Turmeric Slices

    by G. Jeevarathinam, T. Pandiarajan, J. Deepa, D. S. Aniesrani Delfiya, S. Dinesh Kumar, T. Krishnakumar, P. Preetha, M. Balakrishnan

    The market value of turmeric is influenced strongly by volatile compounds which indicate product quality. In this study, turmeric slices of 5 mm with bed thicknesses of 50 mm were dried using three techniques: infrared (IR‐D), hot air (HA‐D), and infrared‐assisted hot air‐drying (IR‐HA‐D) at temperatures of 50°, 60°, and 70°C. This study examined the effects of increased bed thickness on drying kinetics, energy requirements, CO 2 emissions, and quality attributes under settings that more closely resemble industrial‐scale drying operations, in contrast to earlier studies that used a 25 mm bed thickness. Among the evaluated drying methods, IR‐HA‐D at 70°C exhibited the highest process efficiency, whereas IR‐HA‐D at 60°C provided superior retention of quality attributes, including curcumin, oleoresin, starch, and color. Seven thin‐layer drying models using nonlinear regression analysis were evaluated, with the Page model showing the best fit across all experimental conditions. The IR‐HA‐D method provided the highest retention of curcumin, oleoresin, starch and color value at 60°C, compared to both IR‐D and HA‐D. Statistical analysis confirmed that both drying techniques and temperature significantly influenced the quality characteristics of the dried turmeric ( p < 0.01). Effective moisture diffusivity ranged from 7.61 × 10 −11 to 2.53 × 10 −10 m 2 s −1 while the activation energy required for moisture diffusion was 31.88 kJ mol −1 for IR‐D, 45.13 kJ mol −1 for HA‐D, and 32.11 kJ mol −1 for IR‐HA‐D.

  • Experimental study on drying characteristics of amla and apple using a dual‐mode heat pump dryer

    by Ranjeet Kumar Rai, Rashmi Rekha Sahoo, Akhilesh Singh, Davinder Pal Singh Oberoi, Anjali Tomar, Sarvesh Rustagi, G. Jeevarathinam

    The present research investigation focuses on analyzing the energy and exergetic efficiencies of Heat Pump Dryers (HPD) while running in closed and open‐cycle modes. The main aim of this study is to perform the comparative performance analysis of the HPD in both closed and open‐cycle configurations for Amal and Apple with a 0.5 m/s constant air flow rate. The performance parameters like total energy consumption, drying temperature, relative humidity, Coefficient of Performance (COP), energy efficiency, drying efficiency, Specific Moisture Extraction Rate (SMER), Moisture Extraction Rate (MER), and exergy destruction rate have been analyzed with respect to drying time. To analyze the performance, a convective batch‐type drying chamber was designed with 8 trays with a spacing of 2.5 cm, and a 5 kg sample was used for experimentation. The research emphasizes that the closed‐cycle mode of the HPD demonstrates more energy efficiency, average drying temperature, MER, SMER, drying efficiency, and less drying time, total energy consumption, and COP in the drying process as compared to the open‐cycle mode. The performance of closed‐mode HPD is observed to be superior for Amla as compared to Apple drying products. The average drying air temperatures and SMER for amla and apple in the open system were 52–60°C, and 2.09 kg/kWh, and 58–60°C, and 1.53 kg/kWh, respectively, but temperatures and SMER in the closed system were 58–65°C, and 1.4 kWh, and 58–67°C, and 3.0 kWh, respectively. The exergy loss in apple drying was the highest at 0.243 kW, highlighting the need for future system optimization.

  • Comparative Studies of Different Drying Methods on Turmeric Slices and Rhizomes: Effect on Drying Kinetics, Quality, Modelling, and Economic Feasibility

    by G. Jeevarathinam, T. Pandiarajan, J. Deepa, D. S. Aniesrani Delfiya, T. Krishnakumar, P. Preetha, M. Balakrishnan, R. Rahul

    Turmeric drying is a critical post‐harvest operation that affects product quality, shelf life, and market value. Traditional sun drying (widely used in rural areas) is slow and contamination‐prone, while conventional hot air drying (though effective) is energy‐intensive and costly. The existing studies often focus on single drying methods or do not simultaneously evaluate drying kinetics, moisture diffusivity, and quality attributes. This study addresses this gap by systematically investigating turmeric slices (5 and 10 mm) and whole rhizomes under three drying systems such as sun, solar, and hot air at two bed thicknesses (25 and 50 mm). The drying behavior was analyzed using moisture ratio, drying rate, and seven thin‐layer models, with the page model best describing sliced turmeric and the two‐term exponential model fitting whole rhizomes. Effective moisture diffusivity ranged from 7.61 × 10 −11 to 5.81 × 10 −10 m 2 /s highest under hot air drying. The quality assessment revealed that hot air drying achieved superior curcumin retention, oleoresin yield, starch content, and color preservation while solar drying provided a sustainable and cost‐effective alternative outperforming sun drying. The novelty of this study lies in its comprehensive comparison of drying methods integrating kinetics, diffusivity, and quality, and highlighting solar drying as a practical solution for small‐scale and rural processing units. It paves the way for hybrid drying technologies that optimize both efficiency and product quality.


  • Comparative Effects of Plasma-Activated and Distilled Water in Microwave-Assisted Heat-Moisture Treatment of Barnyard Millet Starch

    by Sai Pratyusha Velichala, S. Ganga Kishore, R. Rahul, Madhuresh Dwivedi, Niranjan Thota, Chingakham Ngotomba Singh, J. Deepa, G. Jeevarathinam

  • Millet-based rice analogues for sustainable food systems: a comprehensive review on advancements, characterization, challenges, and future prospects for enhancing food security and health

    by S. Ganga Kishore, Madhuresh Dwivedi, Smriti Chaturvedi, J. Deepa, G. Jeevarathinam

    Millet-based rice analogues provide a nutritious, low-GI alternative to polished rice. Optimized extrusion conditions enhance protein and iron content, improve cooking quality, and enable scalable production for sustainable diets.


  • Drying of Onion and Onion Slices: Comparative Methods and Their Impact on Kinetics, Quality, Nutritional Properties, Modelling, Drying Efficiency, and Energy Consumption: A Review

    by G. Jeevarathinam, J. Deepa, R. Nisha, C. Nickhil, Raj Singh, S. Shahir, D. S. Aniesrani Delfiya, P. Preetha, Punit Singh, Davinder Pal Singh Oberoi, et al.

    Onion drying is an essential post‐harvest process that extends shelf life and preserves the nutritional, functional, and sensory qualities of onions. This review evaluates the influence of various pretreatments (brining, thermal, non‐thermal, and potassium metabisulfite) and drying methods (open sun, solar, convective, microwave, and freeze drying) on drying kinetics, quality characteristics, energy efficiency, and cost economics. Among pretreatments, blanching and ultrasound notably improved drying efficiency by enhancing moisture diffusion, reducing drying time, and maintaining product quality. Conventional drying methods, such as sun and hot‐air drying, are simple and low‐cost but often lead to nutrient degradation, color changes, and reduced sensory appeal. In contrast, advanced and hybrid drying technologies (vacuum, freeze, and low‐pressure superheated steam drying) ensure better retention of bioactive compounds, thiosulphinates, and aroma while improving rehydration capacity. However, these techniques are often limited by high energy requirements and scalability issues. Hybrid drying systems provide the most effective compromise between product quality and energy efficiency, achieving higher moisture removal with reduced specific energy consumption. Mathematical models, particularly thin‐layer (Page, Logarithmic) are used for predicting drying behavior and optimizing parameters. High‐temperature drying can cause color darkening and volatile losses, whereas low‐temperature or vacuum‐based drying better preserves phenolics, vitamin C, and aroma. Overall, integrating optimized pre‐treatments with hybrid or energy‐efficient drying technologies can produce superior‐quality dried onion products while minimizing energy use and processing costs, supporting sustainable and scalable industrial drying operations.


  • Drying Kinetics, Quality Characteristics and Mathematical Modeling of Circular Shaped Cassava Slices: Effect of Varieties, Thicknesses, and Drying Methods

    by T. Krishnakumar, M. S. Sajeev, C. Pradeepika, G. Jeevarathinam, V. Chelladurai, M. Velmurugan

    Drying is a crucial unit operation in cassava flour processing, as the product quality is largely determined by the drying method employed. The main objective of this study was to optimize the variety, slice thickness, and drying method to maintain the quality of cassava slices for producing high quality cassava flour (HQCF), which serves as a key ingredient in developing gluten free food products. Drying experiments were conducted using three drying methods (open sun, solar, and convective hot air drying), three slice thicknesses (1.5, 2.5, and 3.5 mm), and three varieties (Sree Athulya, Sree Suvarna, and M4). The moisture content of the dried slices ranged from 7.70% to 10.75% (dry basis). Among the tested conditions, convective hot air drying of 1.5 mm slices resulted in the highest drying rate (0.24 g•g −1 •min −1 ) and shortest drying time (180 min), irrespective of variety. Cassava slices of 1.5 mm thickness dried under solar drying retained the most desirable quality attributes, including higher starch content and whiteness. The Sree Athulya variety exhibited the highest starch content (76.27% ± 0.82% d.b.) and a whiteness index of 87.43. Statistical analysis revealed that the interaction among drying method, slice thickness, and variety had a highly significant effect ( p ≤ 0.01) on the quality attributes of cassava slices. Solar drying of 1.5 mm thick slices across all the varieties was identified as the optimal condition for producing high quality cassava flour (HQCF). Seven thin layer drying models were applied to describe the drying kinetics of cassava slices. The Page model provided the best fit, as indicated by its high R 2 and low RMSE and χ 2 values, confirming its suitability for characterizing thin‐layer drying behavior under varying conditions. Thus, solar drying is an efficient method for producing high quality cassava flour from thin (1.5 mm) cassava slices, suitable for developing gluten free food products.


  • Advanced Techniques for Enhancing Resistant Starch in Cereals: A Review

    by Rakesh Raghunathan, G. Jeevarathinam, Vandana Chaudhary, Seema Ramniwas, Sarvesh Rustagi

    Starch is a primary carbohydrate storage molecule in plants found in roots, tubers, seeds, and leaves serving as an energy source. It is widely used in both food and industrial sectors due to its renewability, biocompatibility, affordability, versatility, and nontoxic nature. Starch is composed of amylose (a linear polymer) and amylopectin (a branched polymer), which have numerous industrial applications as binders, coatings, adhesives, and drug carriers. However, its inherent limitations such as poor solubility, instability under temperature and shear, high retrogradation, and thermal decomposition have limited its wider utility. To overcome these drawbacks, various modification methods have been explored to enhance its functional properties. Starches are also classified based on their digestibility in the gastrointestinal tract, namely as rapidly digestible starch (RDS), slowly digestible starch (SDS), and resistant starch (RS). RS escapes digestion in the small intestine and is fermented in the large intestine. It has gained attention for its health benefits, such as lowering postprandial blood glucose levels and improving gut health. This review highlights the importance of resistant starch in cereals and examines the novel methods to enhance its content, including physical, chemical, enzymatic, genetic, and nonthermal techniques. Understanding the factors influencing enzyme digestibility and food microstructure will guide food processors in developing RS‐rich products with a lower glycemic index.