AEAhmet Konuralp Eli̇çİn

Ahmet Konuralp Eli̇çİn

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ahmet Konuralp Eli̇çİn has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Determination of energy usage and greenhouse gas (GHG) emissions in artichoke production

    by Cihan Demir, Mehmet Fırat Baran, Ahmet Konuralp Eliçin

    This study has been conducted with the purpose of determining the energy usage (EU) and greenhouse gas (GHG) emissions of artichoke production. It has been conducted in Efeler district of Aydın province of Türkiye during the 2022 production period. According to the results of the study, total input energy (EI) was calculated to be 32 211.48 MJ/ha and output energy (OE) was calculated to be 5 460 MJ/ha. EI in artichoke production were 15 718.20 MJ/ha (48.80%) chemical fertilizers energy, 8 896.98 (27.62%) diesel fuel energy, 3 832.27 (11.90%) machinery energy, 1 958.40 (6.08%) electricity energy, 1 036.35 (3.22%) irrigation water energy, 329.55 (1.02%) human labour energy, 294 MJ/ha (0.91%) plant energy and 145.73 (0.45%) chemicals energy, respectively. Energy use efficiency (EUE), specific energy (SE), energy productivity (EP) and net energy (NE) values were found as 0.17, 4.72 MJ/kg, 0.21 kg/MJ and -26 751.48 MJ/ha, respectively. The total energy inputs that were involved in artichoke production were classified as: 37.94% (12 221.28 MJ/ha) direct (IE), 62.06% (19 990.20 MJ/ha) indirect (IDE), 5.15% (1 659.90 MJ/ha) renewable (RE) and 94.85% (30 551.58 MJ/ha) non-renewable (NRE). Total GHG emission was calculated as 1 401.64 kgCO2eq/hafor artichoke production with the greatest share for diesel fuel (31.11%). GHG ratio value was calculated as 0.21 kgCO2eq/kg in artichoke production.

  • Open Access

    Energy balance and greenhouse gas (GHG) emissions of Sauceboat Pepper (Capsicum annuum L.) production in Türkiye

    by Mehmet Fırat Baran, Ahmet Konuralp Eli̇çİn, Korkmaz Belli̇tÜrk, Ahmet Çeli̇k

    In this study, the efficiency of energy consumption and the amount of greenhouse gas emissions from the cultivation of sauceboat pepper were determined. The experiments and research data are based on the 2020 growing season and were conducted in the Karaisali district of Adana province, Turkey. The primary data used in this study, such as the financial system, labor efficiency, fuel consumption levels, weights of tools and machinery used in sauceboat pepper production, fertilizer, and seedling quantities, were obtained from existing calculations, previous studies, and various sources. The energy ratio, specific energy, energy productivity, and net energy in sauceboat pepper were calculated as 0.82, 0.98 MJ kg-1, 1.02 kg MJ-1, and -6845.51 MJ ha-1, respectively. In the case of the sauceboat peppers, the energy of the fuel oil had the highest share of the total energy input, 31.65%. It was followed by energy for planting seedlings, energy for fertilizer, water energy for irrigation, energy for human labour, energy for spraying, and energy for machinery, with 21.55%, 19.64%, 12.55%, 8.59%, 4.45%, and 1.87%, respectively. Total GHG emissions were estimated as 3703.54 kgCO2-eq ha-1 for sauceboat pepper highest-quality production portion in human labour (31.18%). Human labour was followed by diesel fuel consumption (25.79%), machine (0.08%), seedling planting (15.90%), nitrogen fertilizer (15.88%), phosphate fertilizer (4.09%), herbicides (3.68%), fungicides (1.93%), calcium consumption (0.09%), magnesium application (0.08%) and iron (0.52%). In addition, the GHG value for the production of sauceboat peppers was calculated to be 0.096 kgCO2-eq kg-1.


  • Open Access

    The effect of rice milling time and feed rate on head rice yield and color properties

    by Ahmet Konuralp Eli̇çİn, Reşat ESGİCİ, Abdullah Sessi̇z

    This study has been carried out to evaluate the head rice yield, kernel broken and the chance of color depend on milling time and feed rate. In this study, threshed rice kernels by combine-harvester at different cylinder speeds, rice harvesting season in 2018, were used for experiment test. According to results, head rice yield decreased slightly as the cylinder speed increased, with yields varying between 71.40 % and 70.28 %. Processing time was found to have a highly significant effect (p<0.01) on the quantities of unbroken kernel, broken kernel, bran, yield and husk. The highest rate of broken kernel was obtained at a processing time of 25 seconds, and the lowest values were obtained at a processing time of 10 seconds. With a processing time of 10 seconds, the quantities of unbroken kernel, broken kernel, bran, yield and husk were 70.74, 3.260, 0.810, 74.37 and 24.82 %, respectively. When the processing time was 25 seconds, the quantity of broken kernel decreased from 70.74 percent to 62.86 percent, and yield decreased from 74.37 % to 67.58 %. The broken kernel ratio increased from 3.26 percent to 4.633 percent and bran ratio increased from 0.8642 percent to 1.822 percent. Husk ratio, on the other hand, increased from 24.82 % to 30.60 %. In other words, as the processing time increased, so did the bran ratio and husk ratio. The highest whiteness value of 70.92 was obtained at a processing time of 25 seconds; while the lowest whiteness value of 63.81 was obtained at a processing time of 10 seconds. There were declines in a and b values as processing time increased, although the differences were not statistically significant. The highest a and b values were obtained at a processing time of 10 seconds, with -0.690 and 15.01, respectively. In conclusion, when processing paddy to rice, processing time needs to be increased to obtain a whiter rice; to have fewer broken kernels and a higher head rice yield, on the other hand, the processing time needs to be short.


  • Open Access

    Şırnak İli Koşullarında Soya Bitkisinin II. Ürün Olarak Yetiştirilebilme Olanaklarının Araştırılması

    by Ferhat Öztürk, Ferhat Kizilgeçi̇, A.Konuralp Eli̇çi̇n

    Soya bünyesinde ihtiva ettiği besinler nedeniyle, insanların ve hayvanların beslenmesinde oldukça önemli bir besin maddesidir. Bu çalışma Şırnak ilinin ikinci ürün soya yetiştiriciliğine uygunluğunun belirlenmesi amacıyla yürütülmüştür. Araştırmada farklı olgunlaşma grubunda yer alan 13 soya çeşidi tesadüf blokları deneme desenine göre üç tekerrürlü olarak 2019 yılında İdil ilçesinde kurulmuştur. Çalışmada tohum sayısı, 100 tohum ağırlığı, protein oranı, tohum verimi, yağ oranı, ve yağ asit içerikleri incelenmiştir. Çalışmanın varyans analizi sonuçlarına göre incelenen tüm özellikler yönünden çeşitler arasında %1 düzeyinde önemli farklılıklar belirlenmiştir. Araştırmada, tane verimi yönünden Gapsoy 16, Planet ve Lider ön plana çıkan çeşitler olmuştur. Blaze ve Gapsoy 16 çeşitleri yüksek protein ihtiva ederken, Atakişi çeşidi en yüksek yağ oranına sahip olmuştur. Oleik asit içeriği Bravo çeşidinden, linoleik asit içeriği ise Lider çeşitlerinde en yüksek değere sahip olduğu belirlenmiştir. Soya fasulyesinin Dünya verim ortalaması 249 kg/da olduğu göz önüne alındığında, araştırmamızda ortalamanın yaklaşık olarak iki katı verim elde edilebilen soya çeşitlerine sahip olmamızdan ötürü Şırnak ilinde 2. ürün soya tarımının yapılabileceğini göstermiştir. Bu nedenle araştırmada kullanılan soya çeşitlerin, yetişme periyodu ve verim miktarları bakımından Şırnak ili koşullarında ikinci ürün olarak başarıyla yetiştiriciliğinin yapılabileceği kanısına varılmıştır.


  • Open Access

    II. Ürün Soya Çeşitlerinin [Glycine max (L.) Merrill] Farklı Yetişme Dönemlerinde Ölçülen Fizyolojik Parametreleri

    by Ferhat Kizilgeçi̇, Ferhat Öztürk, Ahmet Konuralp Eli̇çi̇n, Nihan Tazebay Asan

    Farklı olgunlaşma grubunda yer alan 13 soya çeşidinin yer aldığı çalışma, tesadüf blokları deneme desenine göre, üç tekrarlamalı olarak 2019 yılında Şırnak ili İdil ilçesinde yürütülmüştür. Çalışmada çiçeklenme başlangıcında (R1) ve tohum olum döneminde (R5) ölçülen klorofil içeriği (SPAD), yaprak alanı (YA), yaprak alan indeksi (YAİ) ve yaprak büyüme oranı (YBO) özellikleri incelenmiştir. SPAD değeri R1’de 35.35-42.20 ve R5’de 42.33-36.5; YA özelliği R1’de172.33 cm2 - 41.66 cm2, R5’de198.66 cm2 - 46 cm2; YAI özelliği R1’de 2.46 cm2/cm2 - 1.14 cm2/cm2, R5’de 6.75 cm2/cm2 - 3.34 cm2/cm2 arasında değişim göstermiştir. İncelenen fizyolojik ölçümler arasında YAI (R5) ile YBO arasında (r = 0.908) olumlu ve % 0.1 düzeyinde ve YA (R1) ile YA (R5) arasında (r = 0,544) olumlu ve % 1 düzeyinde önemli ilişki olduğu görülmüştür.

  • Bazı Yerli Tip Üzüm (Vitis Vinifera L.) Çeşitlerinin Budama Sürgünlerinin Kesme Özelliklerinin Belirlenmesi

    by F. Göksel Peki̇tkan, A. Konuralp Eli̇çi̇n, Abdullah Sessi̇z

    Bağcılıkta budama ve hasat işlemleri işgücü temini, zamanın etkin kullanımı, ürün kayıpları, kalite ve üretim maliyetleri açısından en kritik olanlardır. Bağ budama işlerinde kullanılacak mekanik araçlar veya budama makaslarının tasarımı ve enerjinin etkin kullanımı için budaması yapılacak asma çeşidinin sürgün kesme kuvveti, kesme gerilmesi ve kesme enerjisi gibi özelliklerinin bilinmesi önemlidir. Bu çalışmada, bağ çubuklarının kesme işlerinde kullanılabilecek bir makinanın tasarımında veya bir budama makasının, kesmede temel parametreler olan kesme kuvveti, kesme gerilmesi ve enerji gereksiniminin belirlenmesi amaçlanmıştır. Bu amaç doğrultusunda başta Diyarbakır ili ve çevresi olmak üzere Güneydoğu Anadolu Bölgesinde yetiştirilen Şire, Öküzgözü ve Boğazkere üzüm çeşitlerinin bıçak tipi, kesme açısı ve kesme hızına bağlı olarak asmaların sürgün kesme özellikleri incelenmiştir. Deneylerde kullanılan asmaların sürgünleri Diyarbakır ilindeki şaraplık üzüm üreten üreticilere ait bağlardan temin edilmiştir. Sürgünlerin kesme özelliklerinin belirlenmesinde Llyod LRX plus, 2500 N kapasiteli biyolojik malzeme test cihazı kullanılmıştır. Elde edilen sonuçlara göre, her üç çeşit için kesme özellikleri, bıçak tipi, kesme açısı ve yükleme durumuna göre değişikliklikler göstermiştir. Kesme kuvveti ve enerji gereksinimi her çeşit ve bıçak tipi için ayrı olmuştur. Genel olarak tırtıklı ağza sahip bıçaklarda kesme kuvveti ve enerji değeri düz-ince ağza sahip olan bıçak tipinde daha yüksek olmuştur. Bıçak kesme açısı arttıkça kesme kuvveti ve kesme enerjisi azalmıştır. En yüksek kesme kuvveti ve enerji değerleri 0ºdüşey yönde yapılan kesmede gerçekleşmiştir. Kesme hızlarının artışı kesme kuvveti, kesme direnci, kesme enerjisi ve spesifik kesme enejisini hafif bir şekilde arttırmıştır. Tüm çeşitlerde en düşük değerler 2 mm s-1’lik yükleme hızlarında elde edilmiştir.