Maria Clara Ayres Estellita
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Maria Clara Ayres Estellita has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Marcelo Victor Sidou Lemos
Graduate Program in Dentistry Faculty of Pharmacy Dentistry and Nursing Federal University of Ceará Fortaleza Ceará Brazil
3 shared publications - Samuel Chillavert Dias Pascoal
Graduate Program in Dentistry Federal University of Ceará Fortaleza Brazil
3 shared publications - Talita Arrais Daniel Mendes
Universidade Federal do Ceará
3 shared publications - Juliano Sartori Mendonça
Department of Restorative Dentistry, Faculty of Pharmacy, Dentistry and Nursing, Federal University of Ceara, Fortaleza, Brazil
2 shared publications - Karlos Eduardo Rodrigues Lima
Centro Universitário Católica de Quixadá
2 shared publications Camila Paiva Lopes
Universidade Federal do Ceará - UFC
1 shared publication
Latest Publications
- Open Access
- 29 April 2025
- Published by Wiley in European Journal of Oral Sciences
- Vol. 133 (3) , e70011
Effect of mussel‐inspired primers on resin–dentin bonding interface stability: A systematic review and meta‐analysis
This paper presents the results of a systematic review and meta‐analysis on the efficacy of mussel‐inspired primers on resin‐dentin bond stability. This review was registered on the OSF platform (https://doi.org/10.17605/OSF.IO/QC7VU) and followed PRISMA guidelines. Databases included PubMed, SCOPUS, Web of Science, EMBASE, Lilacs, LIVIVO, and gray literature. Eligibility criteria included in vitro studies using human dentin, which assessed bond strength through microtensile tests after applying mussel‐inspired primers. Exclusion criteria were studies evaluating bond strength to enamel, animal dentin, and ceramics, those not using the microtensile test, or those conducting immediate evaluation only. The RoBDEMAT tool was used for risk‐of‐bias analysis. Two independent reviewers screened 5522 articles, and seven were selected. The studies showed a similar risk of bias performance, with insufficient reporting of different parameters, while not presenting significant publication bias. Meta‐analysis revealed significantly higher bond strength in specimens treated with mussel‐inspired monomers after thermocycling. Across studies, no substantial reduction in heterogeneity was observed using the leave‐one‐out method. Mussel‐inspired monomers incorporated into the dentin adhesive procedure can enhance bond strength, mainly through their catecholic groups, highlighting their potential in adhesive dentistry. However, drawbacks such as oxidative potential and effects on the degree of conversion may limit their widespread application.
- 29 April 2025
- Published by Wiley in European Journal of Oral Sciences
- Vol. 133 (3) , e70011
Open AccessEffect of mussel‐inspired primers on resin–dentin bonding interface stability: A systematic review and meta‐analysis
This paper presents the results of a systematic review and meta‐analysis on the efficacy of mussel‐inspired primers on resin‐dentin bond stability. This review was registered on the OSF platform (https://doi.org/10.17605/OSF.IO/QC7VU) and followed PRISMA guidelines. Databases included PubMed, SCOPUS, Web of Science, EMBASE, Lilacs, LIVIVO, and gray literature. Eligibility criteria included in vitro studies using human dentin, which assessed bond strength through microtensile tests after applying mussel‐inspired primers. Exclusion criteria were studies evaluating bond strength to enamel, animal dentin, and ceramics, those not using the microtensile test, or those conducting immediate evaluation only. The RoBDEMAT tool was used for risk‐of‐bias analysis. Two independent reviewers screened 5522 articles, and seven were selected. The studies showed a similar risk of bias performance, with insufficient reporting of different parameters, while not presenting significant publication bias. Meta‐analysis revealed significantly higher bond strength in specimens treated with mussel‐inspired monomers after thermocycling. Across studies, no substantial reduction in heterogeneity was observed using the leave‐one‐out method. Mussel‐inspired monomers incorporated into the dentin adhesive procedure can enhance bond strength, mainly through their catecholic groups, highlighting their potential in adhesive dentistry. However, drawbacks such as oxidative potential and effects on the degree of conversion may limit their widespread application.
- 3 January 2024
- Published by Wiley in European Journal of Oral Sciences
- Vol. 132 (2) , e12970
Chemical analysis of n‐propyl gallate used as pre‐treatment for resin‐dentin bond strength: In vitro study
This study aimed to evaluate the effect of n‐propyl gallate as pre‐treatment for resin‐dentin bond strength. The dentin pre‐treatments evaluated included propyl gallate of concentrations 0.1% (w/v), 1.0% (w/v), and 10.0% (w/v), as well as glutaraldehyde 5.0% (v/v), and distilled water as a control treatment. Dentin specimens were prepared for Fourier Transformed Infrared Spectroscopy (FT‐IR) (n = 3/pre‐treatment). Pre‐treatments were actively applied to dentin blocks before performing the adhesive procedure to composite resin. Microtensile bond strength to dentin (μTBS) (n = 8/pre‐treatment) was determined after 24 h and 6 months of storage. Data were submitted to a two‐way ANOVA, followed by Tukey's post hoc test. As for FT‐IR, propyl gallate 1%‐treated specimens presented higher water, carbonate, collagen, and amide absorbance rates compared to other tested groups, while specimens pre‐treated with glutaraldehyde and distilled water presented similar absorbance curves. Regarding μTBS, all concentrations of propyl gallate resulted in statistically significant higher bond strength values than distilled water at 24 h. After 6 months of storage, propyl gallate 0.1% was the only group that maintained μTBS over time. Propyl gallate 0.1% might be a suitable dentinal pre‐treatment due to being able to present chemical bonds with demineralized dentin and providing resin‐dentin bond stability after 6 months of storage.
- 3 January 2024
- Published by Wiley in European Journal of Oral Sciences
- Vol. 132 (2) , e12970
Chemical analysis of n‐propyl gallate used as pre‐treatment for resin‐dentin bond strength: In vitro study
This study aimed to evaluate the effect of n‐propyl gallate as pre‐treatment for resin‐dentin bond strength. The dentin pre‐treatments evaluated included propyl gallate of concentrations 0.1% (w/v), 1.0% (w/v), and 10.0% (w/v), as well as glutaraldehyde 5.0% (v/v), and distilled water as a control treatment. Dentin specimens were prepared for Fourier Transformed Infrared Spectroscopy (FT‐IR) (n = 3/pre‐treatment). Pre‐treatments were actively applied to dentin blocks before performing the adhesive procedure to composite resin. Microtensile bond strength to dentin (μTBS) (n = 8/pre‐treatment) was determined after 24 h and 6 months of storage. Data were submitted to a two‐way ANOVA, followed by Tukey's post hoc test. As for FT‐IR, propyl gallate 1%‐treated specimens presented higher water, carbonate, collagen, and amide absorbance rates compared to other tested groups, while specimens pre‐treated with glutaraldehyde and distilled water presented similar absorbance curves. Regarding μTBS, all concentrations of propyl gallate resulted in statistically significant higher bond strength values than distilled water at 24 h. After 6 months of storage, propyl gallate 0.1% was the only group that maintained μTBS over time. Propyl gallate 0.1% might be a suitable dentinal pre‐treatment due to being able to present chemical bonds with demineralized dentin and providing resin‐dentin bond stability after 6 months of storage.
- Open Access
- 14 July 2023
- Published by Publicacoes Cientificas de Acesso Aberto e Editora LTDA in Brazilian Journal of Case Reports
- Vol. 3 (Suppl.8) , 38
A UTILIZAÇÃO DE ADESIVOS DENTAIS À BASE DE CATECÓIS BIOINSPIRADOS NA ADESÃO SUBAQUÁTICA DE MEXILHÕES: UMA REVISÃO DE LITERATURA
A incorporação de moléculas adesivas inspiradas em animais marinhos como o mexilhão, vem ganhando espaço na literatura devido sua capacidade de promover adesão em ambientes altamente hídricos, podendo ser beneficial para a manutenção da interface de união resina-dentina. O objetivo do presente trabalho é revisar a literatura disponível sobre a utilização de adesivos dentais à base de catecóis bioinspirados na adesão subaquática de mexilhões. Utilizou-se as bases de dados ScienceDirect e Pubmed com os descritores “Adhesion”, “Dentin” e “Mussel”, utilizando o operador booleano “AND”. Empregou-se como critério de inclusão artigos de pesquisa, no idioma inglês, sem limite de tempo, resultando em 61 artigos. Foram excluídas revisões, artigos com fuga ao tema e duplicatas, resultando em 9 artigos selecionados. A adesividade de mexilhões é atribuída a uma de suas proteínas adesivas, a 3,4-dihidroxifenilanina (DOPA). Atribui-se ao grupamento catecólico presente na molécula da DOPA a capacidade de promover estabilidade adesiva mesmo em ambientes adversos, como o ambiente marinho, que sofre com constantes alterações físico-químicas. Sugere-se que a DOPA incorporada em adesivos dentários pode promover interações positivas com o colágeno dentinário, melhorando a sua estabilidade, além de inibir proteases endógenas e hidrólise, promovendo mais resistência em restaurações em resina composta. Conclui-se que a forte capacidade adesiva da DOPA se mostra promissora na Odontologia Restauradora.
- 14 July 2023
- Published by Publicacoes Cientificas de Acesso Aberto e Editora LTDA in Brazilian Journal of Case Reports
- Vol. 3 (Suppl.8) , 38
Open AccessA UTILIZAÇÃO DE ADESIVOS DENTAIS À BASE DE CATECÓIS BIOINSPIRADOS NA ADESÃO SUBAQUÁTICA DE MEXILHÕES: UMA REVISÃO DE LITERATURA
A incorporação de moléculas adesivas inspiradas em animais marinhos como o mexilhão, vem ganhando espaço na literatura devido sua capacidade de promover adesão em ambientes altamente hídricos, podendo ser beneficial para a manutenção da interface de união resina-dentina. O objetivo do presente trabalho é revisar a literatura disponível sobre a utilização de adesivos dentais à base de catecóis bioinspirados na adesão subaquática de mexilhões. Utilizou-se as bases de dados ScienceDirect e Pubmed com os descritores “Adhesion”, “Dentin” e “Mussel”, utilizando o operador booleano “AND”. Empregou-se como critério de inclusão artigos de pesquisa, no idioma inglês, sem limite de tempo, resultando em 61 artigos. Foram excluídas revisões, artigos com fuga ao tema e duplicatas, resultando em 9 artigos selecionados. A adesividade de mexilhões é atribuída a uma de suas proteínas adesivas, a 3,4-dihidroxifenilanina (DOPA). Atribui-se ao grupamento catecólico presente na molécula da DOPA a capacidade de promover estabilidade adesiva mesmo em ambientes adversos, como o ambiente marinho, que sofre com constantes alterações físico-químicas. Sugere-se que a DOPA incorporada em adesivos dentários pode promover interações positivas com o colágeno dentinário, melhorando a sua estabilidade, além de inibir proteases endógenas e hidrólise, promovendo mais resistência em restaurações em resina composta. Conclui-se que a forte capacidade adesiva da DOPA se mostra promissora na Odontologia Restauradora.
- Open Access
- 23 September 2021
- Published by Archives of Health Investigation in ARCHIVES OF HEALTH INVESTIGATION
- Vol. 11 (5) , 806-810
Effectiveness of Home Disinfection of Dental Brushes through Chemical Methods
Oral hygiene gained a great deal of space in the daily lives of the population, with that the concern with the correct way to perform the hygiene and storage of the toothbrush. Bacterial plaque is one of the main causative agents of caries and periodontal disease, along with bacteria, fungi and viruses that are found within the oral cavity. The accumulation of biofilm and the lack of oral hygiene provide an ideal environment for the proliferation of microorganisms, increasing the risk of causing these diseases. In this regard, the toothbrush will serve as an important tool for removing plaque and these organisms. However, right after the first use of the brush, these microorganisms become lodged on the surface of the brush. In order to reduce the number of microorganisms, physical and chemical methods have emerged for disinfecting toothbrushes. Thus, this study aims to analyze the effectiveness of home disinfection of toothbrushes using chemical substances. This is an in vitro laboratory study in which brush hygiene was evaluated by immersion and spraying (n=3), with chlorhexidine, hydrogen peroxide, essential oils and distilled water, as a negative control, to serve as a comparison for microbial growth in Brain Heart Infusion Broth (BHI) culture medium. The result was evaluated according to the transparency of the culture medium following the McFarland turbidity scale. The result of the experiments was that the group by immersion of essential oils showed the best result in the absence of bacterial growth, followed by chlorhexidine and then hydrogen peroxide. The group by spraying both substances was the one that proved to be the most flawed, with a high rate of bacterial growth. Thus, essential oils were the most effective substance, however, none of the methods proved to be totally efficient in combating Streptococcus mitis.
- 23 September 2021
- Published by Archives of Health Investigation in ARCHIVES OF HEALTH INVESTIGATION
- Vol. 11 (5) , 806-810
Open AccessEffectiveness of Home Disinfection of Dental Brushes through Chemical Methods
Oral hygiene gained a great deal of space in the daily lives of the population, with that the concern with the correct way to perform the hygiene and storage of the toothbrush. Bacterial plaque is one of the main causative agents of caries and periodontal disease, along with bacteria, fungi and viruses that are found within the oral cavity. The accumulation of biofilm and the lack of oral hygiene provide an ideal environment for the proliferation of microorganisms, increasing the risk of causing these diseases. In this regard, the toothbrush will serve as an important tool for removing plaque and these organisms. However, right after the first use of the brush, these microorganisms become lodged on the surface of the brush. In order to reduce the number of microorganisms, physical and chemical methods have emerged for disinfecting toothbrushes. Thus, this study aims to analyze the effectiveness of home disinfection of toothbrushes using chemical substances. This is an in vitro laboratory study in which brush hygiene was evaluated by immersion and spraying (n=3), with chlorhexidine, hydrogen peroxide, essential oils and distilled water, as a negative control, to serve as a comparison for microbial growth in Brain Heart Infusion Broth (BHI) culture medium. The result was evaluated according to the transparency of the culture medium following the McFarland turbidity scale. The result of the experiments was that the group by immersion of essential oils showed the best result in the absence of bacterial growth, followed by chlorhexidine and then hydrogen peroxide. The group by spraying both substances was the one that proved to be the most flawed, with a high rate of bacterial growth. Thus, essential oils were the most effective substance, however, none of the methods proved to be totally efficient in combating Streptococcus mitis.
- Open Access
- 2 March 2021
- Published by Research, Society and Development in Research, Society and Development
- Vol. 10 (3)
Inovações em resina composta: uma revisão de literatura
O presente estudo objetivou revisar a literatura acerca da incorporação de substâncias para aprimorar as propriedades mecânicas, químicas e ópticas dos compósitos. Para tanto, foi realizada uma busca na base de dados PubMed, utilizando o descritor “Composite Resins” combinado através do operador booleano AND com cada um dos seguintes descritores “Anti-bacterial Agents”, “Bulk Fill”, “Fillers” e “Photoinitiators”. Foram selecionados 11 artigos na língua inglesa. Existem resinas incorporadas por biovidro (BV) que reduzem a penetração de biofilme em espaços marginais dos compósitos. Estudos mostraram que a integração de metacrilatos e nanopartículas de fosfato de cálcio amorfo (NACP) favoreciam na ação antibacteriana, bem como na remineralização. Outro autor fundamentou o desenvolvimento de um compósito dentinário auto-reparável, bem como, a incorporação de dimetilaminohexadecil metacrilato de amônio quaternário (DMAHDM) que reduziu o crescimento de biofilme sem comprometer as propriedades mecânicas. Desse modo, constata-se a positiva e eficaz evolução dos compósitos resinosos favorecendo melhorias nas propriedades físicas e químicas. Entretanto, não há uma unanimidade de qual compósito garante suprimir todas as limitações.
- 2 March 2021
- Published by Research, Society and Development in Research, Society and Development
- Vol. 10 (3)
Open AccessInovações em resina composta: uma revisão de literatura
O presente estudo objetivou revisar a literatura acerca da incorporação de substâncias para aprimorar as propriedades mecânicas, químicas e ópticas dos compósitos. Para tanto, foi realizada uma busca na base de dados PubMed, utilizando o descritor “Composite Resins” combinado através do operador booleano AND com cada um dos seguintes descritores “Anti-bacterial Agents”, “Bulk Fill”, “Fillers” e “Photoinitiators”. Foram selecionados 11 artigos na língua inglesa. Existem resinas incorporadas por biovidro (BV) que reduzem a penetração de biofilme em espaços marginais dos compósitos. Estudos mostraram que a integração de metacrilatos e nanopartículas de fosfato de cálcio amorfo (NACP) favoreciam na ação antibacteriana, bem como na remineralização. Outro autor fundamentou o desenvolvimento de um compósito dentinário auto-reparável, bem como, a incorporação de dimetilaminohexadecil metacrilato de amônio quaternário (DMAHDM) que reduziu o crescimento de biofilme sem comprometer as propriedades mecânicas. Desse modo, constata-se a positiva e eficaz evolução dos compósitos resinosos favorecendo melhorias nas propriedades físicas e químicas. Entretanto, não há uma unanimidade de qual compósito garante suprimir todas as limitações.