Paknoosh Karimaghaee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Paknoosh Karimaghaee has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Mohammad Hassan Khooban
Department of Electrical and Computer Engineering, Aarhus University, 8200 Aarhus, Denmark
4 shared publications - Zeinab Salehi
Department of Electrical Engineering, Shiraz University, Shiraz, Iran
4 shared publications - Navid Noroozi
Islamic Azad University
2 shared publications - Afrooz Ebadat
ACCESS Linnaeus Center and Department of Automatic Control, Osquldas väg 10, 100 44 Stockholm, KTH Royal Institute of Technology, Sweden
1 shared publication - Akbar Sheikh-Akbari
School of Built Environment, Engineering and Computing, Leeds Beckett University, Leeds LS6 3QS, UK
1 shared publication - Ali Akbar Safavi
School of Electrical and Computer Engineering, Shiraz University, Shiraz, Iran
1 shared publication
Latest Publications
- Open Access
Sliding Mode Controller for Parameter-Variable Load Sharing in Islanded AC Microgrid
Controlling voltage, frequency, and current in an islanded microgrid is a challenging problem because the distributed generation sources, stochastic and intermittent in nature, are not connected to the main electricity network to provide stable and clean energy. Therefore, the design of a robust controller to control the output parameters of the islanded microgrid and suppress load variations and disturbances is essential. In this paper, a hysteresis controller is proposed and designed to control the output voltage of an islanded AC microgrid and an improved sliding mode controller (SMC) based on adaptive control principle is designed to control the current of the microgrid. The current controller consists of two parts: An adaptation part, which aims to eliminate disturbances and system uncertainties, and a second part, which aims to deal with the tracking problem of the system under parameter-varying topologies. The adaptation strategy has the advantage of solving the gain tuning problem and chattering reduction. It also requires limited information about disturbance and uncertainties of the system. To validate the proposed control methodology and show its effectiveness, a case study of a simulated islanded microgrid is presented. The results show that the proposed controllers can effectively control the current and voltage underload changes and increase the stability and resilience of the microgrid. The results also reveal that the performance of the proposed controller in terms of total harmonic distortion (THD) and dynamic response overcome the performance of conventional controller by a 4× reduction in THD and 40–200× reduction in settling time.
Open AccessSliding Mode Controller for Parameter-Variable Load Sharing in Islanded AC Microgrid
Controlling voltage, frequency, and current in an islanded microgrid is a challenging problem because the distributed generation sources, stochastic and intermittent in nature, are not connected to the main electricity network to provide stable and clean energy. Therefore, the design of a robust controller to control the output parameters of the islanded microgrid and suppress load variations and disturbances is essential. In this paper, a hysteresis controller is proposed and designed to control the output voltage of an islanded AC microgrid and an improved sliding mode controller (SMC) based on adaptive control principle is designed to control the current of the microgrid. The current controller consists of two parts: An adaptation part, which aims to eliminate disturbances and system uncertainties, and a second part, which aims to deal with the tracking problem of the system under parameter-varying topologies. The adaptation strategy has the advantage of solving the gain tuning problem and chattering reduction. It also requires limited information about disturbance and uncertainties of the system. To validate the proposed control methodology and show its effectiveness, a case study of a simulated islanded microgrid is presented. The results show that the proposed controllers can effectively control the current and voltage underload changes and increase the stability and resilience of the microgrid. The results also reveal that the performance of the proposed controller in terms of total harmonic distortion (THD) and dynamic response overcome the performance of conventional controller by a 4× reduction in THD and 40–200× reduction in settling time.
- Open Access
- 8 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 17003-17017
Kernel Parameter Optimization for Support Vector Machine Based on Sliding Mode Control
Support Vector Machine (SVM) is a supervised machine learning algorithm, which is used for robust and accurate classification. Despite its advantages, its classification speed deteriorates due to its large number of support vectors when dealing with large scale problems and dependency of its performance on its kernel parameter. This paper presents a kernel parameter optimization algorithm for Support Vector Machine (SVM) based on Sliding Mode Control algorithm in a closed-loop manner. The proposed method defines an error equation and a sliding surface, iteratively updates the Radial Basis Function (RBF) kernel parameter or the 2-degree polynomial kernel parameters, forcing SVM training error to converge below a threshold value. Due to the closed-loop nature of the proposed algorithm, key features such as robustness to uncertainty and fast convergence can be obtained. To assess the performance of the proposed technique, ten standard benchmark databases covering a range of applications were used. The proposed method and the state-of-the-art techniques were then used to classify the data. Experimental results show the proposed method is significantly faster and more accurate than the anchor SVM technique and some of the most recent methods. These achievements are due to the closed-loop nature of the proposed algorithm, which significantly has reduced the data dependency of the proposed method.
- 8 February 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 17003-17017
Open AccessKernel Parameter Optimization for Support Vector Machine Based on Sliding Mode Control
Support Vector Machine (SVM) is a supervised machine learning algorithm, which is used for robust and accurate classification. Despite its advantages, its classification speed deteriorates due to its large number of support vectors when dealing with large scale problems and dependency of its performance on its kernel parameter. This paper presents a kernel parameter optimization algorithm for Support Vector Machine (SVM) based on Sliding Mode Control algorithm in a closed-loop manner. The proposed method defines an error equation and a sliding surface, iteratively updates the Radial Basis Function (RBF) kernel parameter or the 2-degree polynomial kernel parameters, forcing SVM training error to converge below a threshold value. Due to the closed-loop nature of the proposed algorithm, key features such as robustness to uncertainty and fast convergence can be obtained. To assess the performance of the proposed technique, ten standard benchmark databases covering a range of applications were used. The proposed method and the state-of-the-art techniques were then used to classify the data. Experimental results show the proposed method is significantly faster and more accurate than the anchor SVM technique and some of the most recent methods. These achievements are due to the closed-loop nature of the proposed algorithm, which significantly has reduced the data dependency of the proposed method.
- Open Access
- 19 January 2022
- Published by MDPI AG in Automation
- Vol. 3 (1) , 84-94
Phase Preserving Balanced Truncation for Order Reduction of Positive Real Systems
This paper presents a new passivity-preserving order reduction method for linear time-invariant passive systems, which are also called positive real (PR) systems, with the aid of the balanced truncation (BT) method. The proposed method stems from the conic positive real balanced truncation (CPRBT) method, which is a modification of the BT method for PR systems. CPRBT presents an algorithm in which the reduced models are obtained from some Riccati equations in which the phase angle of the transfer function has been taken into consideration. Although CPRBT is a powerful algorithm for obtaining accurate PR reduced-order models, it cannot guarantee that the phase diagram of the reduced model remains inside the same interval as that of the original full-order system. We aim to address such a problem by modifying CPRBT in the way that the phase angle of the reduced transfer function always remains inside the conic and homolographic phase interval of the original system. This is proven through some matrix manipulations, which has added mathematical value to the paper. Finally, in order to assess the efficacy of the proposed method, two numerical examples are simulated.
- 19 January 2022
- Published by MDPI AG in Automation
- Vol. 3 (1) , 84-94
Open AccessPhase Preserving Balanced Truncation for Order Reduction of Positive Real Systems
This paper presents a new passivity-preserving order reduction method for linear time-invariant passive systems, which are also called positive real (PR) systems, with the aid of the balanced truncation (BT) method. The proposed method stems from the conic positive real balanced truncation (CPRBT) method, which is a modification of the BT method for PR systems. CPRBT presents an algorithm in which the reduced models are obtained from some Riccati equations in which the phase angle of the transfer function has been taken into consideration. Although CPRBT is a powerful algorithm for obtaining accurate PR reduced-order models, it cannot guarantee that the phase diagram of the reduced model remains inside the same interval as that of the original full-order system. We aim to address such a problem by modifying CPRBT in the way that the phase angle of the reduced transfer function always remains inside the conic and homolographic phase interval of the original system. This is proven through some matrix manipulations, which has added mathematical value to the paper. Finally, in order to assess the efficacy of the proposed method, two numerical examples are simulated.
- 17 May 2021
- Published by Springer Nature in Circuits, Systems, and Signal Processing
- Vol. 40 (11) , 5309-5327
Model Order Reduction of Positive Real Systems Based on Mixed Gramian Balanced Truncation with Error Bounds
- 17 May 2021
- Published by Springer Nature in Circuits, Systems, and Signal Processing
- Vol. 40 (11) , 5309-5327
Model Order Reduction of Positive Real Systems Based on Mixed Gramian Balanced Truncation with Error Bounds
- 1 April 2021
- Published by Elsevier in Biomedical Signal Processing and Control
- Vol. 66, 102467
Hardware-in-the-loop control of glucose in diabetic patients based on nonlinear time-varying blood glucose model
- 1 April 2021
- Published by Elsevier in Biomedical Signal Processing and Control
- Vol. 66, 102467
Hardware-in-the-loop control of glucose in diabetic patients based on nonlinear time-varying blood glucose model
- 9 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Systems, Man, and Cybernetics: Systems
- Vol. 52 (5) , 2945-2953
A New Passivity Preserving Model Order Reduction Method: Conic Positive Real Balanced Truncation Method
This article is dedicated to model order reduction of linear time-invariant passive systems, i.e., positive real (PR) systems, based on the balanced truncation (BT) concept. The main feature of this article is that we have used the phase angle of the transfer function, $G(s)$ , in model order reduction for the first time in the proposed method, which results in more accurate reduced-order models. It is worth noting that this hypothesis has been never made before in any other model order reduction techniques. Furthermore, new gramians are calculated corresponding to their associated new Riccati equations and Lur’e equations, which are in turn achieved by using Kalman–Yakubovic–Popov (KYP) lemma and linear matrix inequalities (LMI). Thereafter, a novel passivity preserving model order reduction algorithm, which takes the phase angle of the transfer function, $G(s)$ , into account, is presented. It is demonstrated that the proposed method is a generalization of the positive real balanced truncation (PRBT) method, and it is perfectly capable of providing more accurate approximation error compared to PRBT. Finally, numerical examples are included to figure out the effectiveness of the presented method.
- 9 March 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Systems, Man, and Cybernetics: Systems
- Vol. 52 (5) , 2945-2953
A New Passivity Preserving Model Order Reduction Method: Conic Positive Real Balanced Truncation Method
This article is dedicated to model order reduction of linear time-invariant passive systems, i.e., positive real (PR) systems, based on the balanced truncation (BT) concept. The main feature of this article is that we have used the phase angle of the transfer function, $G(s)$ , in model order reduction for the first time in the proposed method, which results in more accurate reduced-order models. It is worth noting that this hypothesis has been never made before in any other model order reduction techniques. Furthermore, new gramians are calculated corresponding to their associated new Riccati equations and Lur’e equations, which are in turn achieved by using Kalman–Yakubovic–Popov (KYP) lemma and linear matrix inequalities (LMI). Thereafter, a novel passivity preserving model order reduction algorithm, which takes the phase angle of the transfer function, $G(s)$ , into account, is presented. It is demonstrated that the proposed method is a generalization of the positive real balanced truncation (PRBT) method, and it is perfectly capable of providing more accurate approximation error compared to PRBT. Finally, numerical examples are included to figure out the effectiveness of the presented method.
- 20 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 68 (7) , 2488-2492
Mixed Positive-Bounded Balanced Truncation
Reducing the order of positive real and bounded real systems has received great interest over the years. Several methods have been published regarding these issues which are able to produce positive real or bounded real reduced models. However, none of them can guarantee that the reduced models are both positive real and bounded real at the same time. In this paper, a novel model reduction scheme is presented which focuses on preserving two possible properties of the system (positive realness and bounded realness) simultaneously. This is done by using one positive real Riccati equation and one bounded real Riccati equation in the reduction procedure. Thereafter, the gramians extracted from these Riccati equations are balanced based on the Balanced Truncation (BT) concept. Finally, a numerical example is provided to investigate the efficacy of the proposed method.
- 20 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 68 (7) , 2488-2492
Mixed Positive-Bounded Balanced Truncation
Reducing the order of positive real and bounded real systems has received great interest over the years. Several methods have been published regarding these issues which are able to produce positive real or bounded real reduced models. However, none of them can guarantee that the reduced models are both positive real and bounded real at the same time. In this paper, a novel model reduction scheme is presented which focuses on preserving two possible properties of the system (positive realness and bounded realness) simultaneously. This is done by using one positive real Riccati equation and one bounded real Riccati equation in the reduction procedure. Thereafter, the gramians extracted from these Riccati equations are balanced based on the Balanced Truncation (BT) concept. Finally, a numerical example is provided to investigate the efficacy of the proposed method.
- 1 July 2020
- Published by Springer Nature in International Journal of Dynamics and Control
- Vol. 9 (1) , 211-224
Lag-synchronization of two different fractional-order time-delayed chaotic systems using fractional adaptive sliding mode controller
- 1 July 2020
- Published by Springer Nature in International Journal of Dynamics and Control
- Vol. 9 (1) , 211-224
Lag-synchronization of two different fractional-order time-delayed chaotic systems using fractional adaptive sliding mode controller
- 2 February 2016
- Published by Wiley in Asian Journal of Control
- Vol. 18 (5) , 1856-1866
A Reset‐Time Dependent Approach for Stability Analysis of Nonlinear Reset Control Systems
A reset mechanism in controller can affect the stability property of a closed loop control system. In a simple word, there are stable reset control systems with unstable base‐systems and also unstable reset systems with stable base‐systems. The Lyapunov stability theory is a strong tool to investigate the stability of a nonlinear system. In this paper, based on the well‐known Lyapunov stability concept, some stability conditions for nonlinear reset control systems are addressed. These conditions are dependent on the reset‐times and hence the reset‐time intervals are explicitly emerged in the stability conditions. Some applications of these results are used in numerical examples to show the effectiveness of the proposed approach.
- 2 February 2016
- Published by Wiley in Asian Journal of Control
- Vol. 18 (5) , 1856-1866
A Reset‐Time Dependent Approach for Stability Analysis of Nonlinear Reset Control Systems
A reset mechanism in controller can affect the stability property of a closed loop control system. In a simple word, there are stable reset control systems with unstable base‐systems and also unstable reset systems with stable base‐systems. The Lyapunov stability theory is a strong tool to investigate the stability of a nonlinear system. In this paper, based on the well‐known Lyapunov stability concept, some stability conditions for nonlinear reset control systems are addressed. These conditions are dependent on the reset‐times and hence the reset‐time intervals are explicitly emerged in the stability conditions. Some applications of these results are used in numerical examples to show the effectiveness of the proposed approach.
- 1 January 2012
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 45 (25) , 223-228
Genetic Algorithm Assisted Fuzzy Iterative Learning Optimizer for Automatic Optimization of Oil well Placement under Production Constraints
- 1 January 2012
- Published by Elsevier in IFAC Proceedings Volumes
- Vol. 45 (25) , 223-228
Genetic Algorithm Assisted Fuzzy Iterative Learning Optimizer for Automatic Optimization of Oil well Placement under Production Constraints