Yinchang Feng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yinchang Feng has a total of 395 co-authors. Here are the top co-authors by number of shared publications:
- Qili Dai
Nankai University
69 shared publications Xiaohui Bi
Nankai University (Tianjin, China)
40 shared publicationsYufen Zhang
Nankai University
40 shared publications- Shaojie Song
Key Laboratory of Urban Air Particulate Pollution Prevention and Control of Ministry of Ecology and Environment, College of Environmental Science and Engineering, Nankai University, Tianjin, 300350, China
31 shared publications Jianhui Wu
State Environmental Protection Key Laboratory of Urban Ambient Air Particulate Matter Pollution Prevention and Control, College of Environmental Science and Engineering
28 shared publicationsBaoshuang Liu
Nankai University
23 shared publications
Latest Publications
- 24 October 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (44) , 31870-31881
From Molecular Topography to Ozone Pollution: Species Sources and Photochemical Kinetics of Individual Organic Peroxyl Radicals
Ground-level ozone (O3) poses significant threats to global public health and climate change. Organic peroxyl radicals (RO2) serve as crucial intermediates in atmospheric O3 formation. Although individual RO2 species exhibit distinct reactivities, the quantification and source attribution of individual RO2 species remain poorly understood. Here, we address the challenge by integrating high-resolution field observations with fundamental theoretical kinetics within a novel hybrid receptor-kinetic modeling framework. The concentration and composition of RO2 species exhibit significant seasonal and diurnal dependencies. In summer, the 19 RO2 pool was characterized by a substantial contribution from biogenic sources (29%), particularly isoprene-derived species (ISOPOBO2). Conversely, the wintertime RO2 composition shifts, dramatically dominated by industrial emissions (41%), notably ethylene-derived species (HOCH2CH2O2). Source apportionment via the RO2+NO pathway further demonstrates that O3 photochemical formation potentials align closely with the kinetics of RO2 production. A data-driven machine learning model effectively captures the contribution of individual RO2 species to O3 formation in summer, but it shows significant deviations from kinetic simulations in winter. The framework establishes a dynamic framework to support daytime O3 mitigation by quantifying the high-time-resolution RO2 radical pool from field VOCs measurements.
- 24 October 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (44) , 31870-31881
From Molecular Topography to Ozone Pollution: Species Sources and Photochemical Kinetics of Individual Organic Peroxyl Radicals
Ground-level ozone (O3) poses significant threats to global public health and climate change. Organic peroxyl radicals (RO2) serve as crucial intermediates in atmospheric O3 formation. Although individual RO2 species exhibit distinct reactivities, the quantification and source attribution of individual RO2 species remain poorly understood. Here, we address the challenge by integrating high-resolution field observations with fundamental theoretical kinetics within a novel hybrid receptor-kinetic modeling framework. The concentration and composition of RO2 species exhibit significant seasonal and diurnal dependencies. In summer, the 19 RO2 pool was characterized by a substantial contribution from biogenic sources (29%), particularly isoprene-derived species (ISOPOBO2). Conversely, the wintertime RO2 composition shifts, dramatically dominated by industrial emissions (41%), notably ethylene-derived species (HOCH2CH2O2). Source apportionment via the RO2+NO pathway further demonstrates that O3 photochemical formation potentials align closely with the kinetics of RO2 production. A data-driven machine learning model effectively captures the contribution of individual RO2 species to O3 formation in summer, but it shows significant deviations from kinetic simulations in winter. The framework establishes a dynamic framework to support daytime O3 mitigation by quantifying the high-time-resolution RO2 radical pool from field VOCs measurements.
- Open Access
- 23 October 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (44) , 31908-31917
Evaluating Emergency Emission Controls During an Unprecedented Regional Haze Event Using Causal Machine Learning
Emergency emission controls are widely implemented to mitigate severe haze, yet their effectiveness is difficult to disentangle from meteorological variability and concurrent changes in activities. Here, we develop a three-step evaluation approach integrating air quality meteorological normalization, augmented synthetic control, and machine-learning prediction to causally quantify intervention-attributable changes in local emission strength and ambient pollutant concentrations. Applied to Shijiazhuang’s unprecedented 45-day “Sharp Sword to Cut Haze” campaign in 2016, the approach revealed that local emission strengths of PM2.5, PM10, SO2, NO2, and CO were reduced by 4.3%, 4.8%, 15.8%, 5.8%, and 15.3%, respectively. Corresponding concentrations fell by 42.1 (14.8%), 47.4 (12.4%), 13.8 (16.6%), 15.8 (15.5%) μg·m–3, and 0.9 mg·m–3 (19.6%). Observation-based PM2.5 source apportionment results independently supported these estimates: contributions from vehicle emissions, steelmaking, and coal combustion were 4.1%, 11.0%, and 21.7% lower, respectively, than during the corresponding period in 2017. Despite stringent controls, PM2.5 averaged 243.2 μg·m–3 during the intervention period. Thus, stringent local controls substantially reduced emissions, but regional transport and unfavorable meteorology partly offset the resulting air quality benefits, highlighting the need for coordinated regional mitigation.
- 23 October 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (44) , 31908-31917
Open AccessEvaluating Emergency Emission Controls During an Unprecedented Regional Haze Event Using Causal Machine Learning
Emergency emission controls are widely implemented to mitigate severe haze, yet their effectiveness is difficult to disentangle from meteorological variability and concurrent changes in activities. Here, we develop a three-step evaluation approach integrating air quality meteorological normalization, augmented synthetic control, and machine-learning prediction to causally quantify intervention-attributable changes in local emission strength and ambient pollutant concentrations. Applied to Shijiazhuang’s unprecedented 45-day “Sharp Sword to Cut Haze” campaign in 2016, the approach revealed that local emission strengths of PM2.5, PM10, SO2, NO2, and CO were reduced by 4.3%, 4.8%, 15.8%, 5.8%, and 15.3%, respectively. Corresponding concentrations fell by 42.1 (14.8%), 47.4 (12.4%), 13.8 (16.6%), 15.8 (15.5%) μg·m–3, and 0.9 mg·m–3 (19.6%). Observation-based PM2.5 source apportionment results independently supported these estimates: contributions from vehicle emissions, steelmaking, and coal combustion were 4.1%, 11.0%, and 21.7% lower, respectively, than during the corresponding period in 2017. Despite stringent controls, PM2.5 averaged 243.2 μg·m–3 during the intervention period. Thus, stringent local controls substantially reduced emissions, but regional transport and unfavorable meteorology partly offset the resulting air quality benefits, highlighting the need for coordinated regional mitigation.
- Open Access
- 20 October 2026
- Published by Copernicus GmbH
Supplementary material to "Impact of heatwaves on sources and transformations of ambient volatile organic compounds"
- 20 October 2026
- Published by Copernicus GmbH
Open AccessSupplementary material to "Impact of heatwaves on sources and transformations of ambient volatile organic compounds"
- Open Access
- 20 October 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-63
Impact of heatwaves on sources and transformations of ambient volatile organic compounds
Heatwaves are increasingly frequent, intense, and prolonged under climate change, affecting atmospheric chemistry and secondary air pollution. Volatile organic compounds (VOCs) are key precursors of ozone (O3) and secondary organic aerosol (SOA), yet the impacts of heatwaves on VOC-related processes remain not fully integrated. This review synthesizes advances in heatwave impacts on VOC emissions, source contributions, transformation, and secondary pollution. Based on 287 publications (~67% from 2020–2026), observations show that heatwaves increase total ambient VOCs, but dominant compounds vary by city and reflect local emissions. Temperature-sensitive anthropogenic sources (solvent use, volatile chemical products, fuel storage, vehicle evaporation) increase strongly, whereas combustion sources are less temperature-dependent. Biogenic VOC emissions, especially isoprene and monoterpenes, respond nonlinearly to temperature and are modulated by plant physiology, water stress, and species-specific storage/synthesis. Heatwaves also enhance atmospheric oxidation through increased photolysis and radical production, altering VOC oxidation, radical cycling, O3 formation regimes, and gas-particle partitioning. Enhanced emissions and oxidation can promote O3 and SOA formation, but net responses depend on VOC-NOx sensitivity, peroxyacetyl nitrate (PAN) chemistry, product volatility, partitioning, reactive uptake, and particle-phase diffusion. Observations, experiments, emission parameterizations, source apportionment, inverse modeling, and chemical transport models provide complementary evidence, but uncertainties remain in temperature-dependent emissions, semi-volatile/intermediate-volatility organic compounds (S/IVOCs) oxidation, multiphase chemistry, and observational constraints. Future research should integrate high-resolution measurements, source apportionment, inverse modeling, and process-based models across heatwave events to quantify source-specific temperature responses and improve predictions of VOC-driven secondary pollution.
- 20 October 2026
- Published by Copernicus GmbH in EGUsphere
- Vol. 2026, 1-63
Open AccessImpact of heatwaves on sources and transformations of ambient volatile organic compounds
Heatwaves are increasingly frequent, intense, and prolonged under climate change, affecting atmospheric chemistry and secondary air pollution. Volatile organic compounds (VOCs) are key precursors of ozone (O3) and secondary organic aerosol (SOA), yet the impacts of heatwaves on VOC-related processes remain not fully integrated. This review synthesizes advances in heatwave impacts on VOC emissions, source contributions, transformation, and secondary pollution. Based on 287 publications (~67% from 2020–2026), observations show that heatwaves increase total ambient VOCs, but dominant compounds vary by city and reflect local emissions. Temperature-sensitive anthropogenic sources (solvent use, volatile chemical products, fuel storage, vehicle evaporation) increase strongly, whereas combustion sources are less temperature-dependent. Biogenic VOC emissions, especially isoprene and monoterpenes, respond nonlinearly to temperature and are modulated by plant physiology, water stress, and species-specific storage/synthesis. Heatwaves also enhance atmospheric oxidation through increased photolysis and radical production, altering VOC oxidation, radical cycling, O3 formation regimes, and gas-particle partitioning. Enhanced emissions and oxidation can promote O3 and SOA formation, but net responses depend on VOC-NOx sensitivity, peroxyacetyl nitrate (PAN) chemistry, product volatility, partitioning, reactive uptake, and particle-phase diffusion. Observations, experiments, emission parameterizations, source apportionment, inverse modeling, and chemical transport models provide complementary evidence, but uncertainties remain in temperature-dependent emissions, semi-volatile/intermediate-volatility organic compounds (S/IVOCs) oxidation, multiphase chemistry, and observational constraints. Future research should integrate high-resolution measurements, source apportionment, inverse modeling, and process-based models across heatwave events to quantify source-specific temperature responses and improve predictions of VOC-driven secondary pollution.
- Open Access
- 7 October 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (41) , 29479-29491
Quantifying Multiple Reaction Pathways for Ambient Consumed Volatile Organic Compounds Derived from Emission Sources
A novel method was developed to quantify source-specific volatile organic compound (VOC) consumption via multiple reaction pathways, including daytime hydroxyl (•OH) radical reactions and nighttime ozone (O3) and nitrate radical (NO3•) reactions. This approach integrates positive matrix factorization (PMF) with observed and initial-concentration data, enabling simultaneous source apportionment of both emitted and chemically consumed VOCs. The method was applied to hourly VOC measurements made in Linfen, a typical industrial city in China, from April to October 2023. Eight emission sources were resolved and quantified for their contributions to VOC consumption through different reaction pathways. During the study period, the mixed source of industrial emissions and solvent usage was the dominant contributor (31.4%) to consumed VOCs, primarily driven by daytime •OH reactions of alkenes. Natural gas and liquefied petroleum gas usage (15.6%) exhibited higher nighttime consumption due to late-evening emissions from residential and commercial activities. Biogenic emissions contributed 10.8% to the consumed VOCs, mainly driven by daytime •OH and nighttime NO3• reactions. Diesel vehicle emissions, petrochemical industry, coking enterprise emissions, combustion emissions, and gasoline vehicle emissions contributed modestly (∼6–12%). This method advances the understanding of VOC loss mechanisms and provides scientific support for source-specific O3 control strategies.
- 7 October 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60 (41) , 29479-29491
Open AccessQuantifying Multiple Reaction Pathways for Ambient Consumed Volatile Organic Compounds Derived from Emission Sources
A novel method was developed to quantify source-specific volatile organic compound (VOC) consumption via multiple reaction pathways, including daytime hydroxyl (•OH) radical reactions and nighttime ozone (O3) and nitrate radical (NO3•) reactions. This approach integrates positive matrix factorization (PMF) with observed and initial-concentration data, enabling simultaneous source apportionment of both emitted and chemically consumed VOCs. The method was applied to hourly VOC measurements made in Linfen, a typical industrial city in China, from April to October 2023. Eight emission sources were resolved and quantified for their contributions to VOC consumption through different reaction pathways. During the study period, the mixed source of industrial emissions and solvent usage was the dominant contributor (31.4%) to consumed VOCs, primarily driven by daytime •OH reactions of alkenes. Natural gas and liquefied petroleum gas usage (15.6%) exhibited higher nighttime consumption due to late-evening emissions from residential and commercial activities. Biogenic emissions contributed 10.8% to the consumed VOCs, mainly driven by daytime •OH and nighttime NO3• reactions. Diesel vehicle emissions, petrochemical industry, coking enterprise emissions, combustion emissions, and gasoline vehicle emissions contributed modestly (∼6–12%). This method advances the understanding of VOC loss mechanisms and provides scientific support for source-specific O3 control strategies.
- Open Access
- 5 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-39
Comment on egusphere-2026-3573
Dust episodes facilitate the long-range transport of crustal materials (CM), thereby increasing their contribution to particulate matter and influencing secondary inorganic aerosol (SNA) formation through changes in particle acidity. However, variations in precursor emissions, meteorological conditions, and particle acidity along dust transport pathways may cause the effects of dust input on SNA formation to differ among cities. Such intercity variability during the same regional dust episode remains insufficiently investigated. To address this gap, synchronous observations were conducted in seven cities in central China during a regional dust episode in April 2023. The results showed that, across the seven cities, the mean contribution of CM to PM2.5 increased from 22.6 % on clean days to 53.2 % on dust days. Correspondingly, particle pH generally increased to 4.24–4.94 during the dust episode, mainly driven by non-volatile cations such as Ca2+ and Mg2+. Calculations of aqueous-phase sulfate formation rates indicated that transition metal ion (TMI) catalyzed oxidation consistently dominated sulfate formation. However, this pathway was generally suppressed during the dust episode as particle pH increased. Although the O3 and NO2 oxidation pathways were enhanced, their increases could not offset the decrease in the TMI-catalyzed pathway. In contrast, elevated particle pH promoted nitrate partitioning. In cities with relatively low clean-day pH values within the rapid-response range of ɛ(NO3- ), even a non-maximum dust-induced pH increase could result in a pronounced increase in particulate nitrate. Therefore, future nitrate pollution control should consider the coordinated management of NOx emissions and fugitive dust sources.
- 5 October 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-39
Open AccessComment on egusphere-2026-3573
Dust episodes facilitate the long-range transport of crustal materials (CM), thereby increasing their contribution to particulate matter and influencing secondary inorganic aerosol (SNA) formation through changes in particle acidity. However, variations in precursor emissions, meteorological conditions, and particle acidity along dust transport pathways may cause the effects of dust input on SNA formation to differ among cities. Such intercity variability during the same regional dust episode remains insufficiently investigated. To address this gap, synchronous observations were conducted in seven cities in central China during a regional dust episode in April 2023. The results showed that, across the seven cities, the mean contribution of CM to PM2.5 increased from 22.6 % on clean days to 53.2 % on dust days. Correspondingly, particle pH generally increased to 4.24–4.94 during the dust episode, mainly driven by non-volatile cations such as Ca2+ and Mg2+. Calculations of aqueous-phase sulfate formation rates indicated that transition metal ion (TMI) catalyzed oxidation consistently dominated sulfate formation. However, this pathway was generally suppressed during the dust episode as particle pH increased. Although the O3 and NO2 oxidation pathways were enhanced, their increases could not offset the decrease in the TMI-catalyzed pathway. In contrast, elevated particle pH promoted nitrate partitioning. In cities with relatively low clean-day pH values within the rapid-response range of ɛ(NO3- ), even a non-maximum dust-induced pH increase could result in a pronounced increase in particulate nitrate. Therefore, future nitrate pollution control should consider the coordinated management of NOx emissions and fugitive dust sources.
- 2 October 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology Letters
- Vol. 13 (10) , 1375-1381
Development and Diagnosis of a Temporal-Context U-Net Deep Learning Surrogate Model for CMAQ Particulate Nitrate over China
Nitrate is a major inorganic component of fine particulate matter, yet simulating it via chemical transport models (CTMs) is computationally intensive. Deep learning surrogates have emerged as efficient tools for approximating CTMs. Here, we developed a Temporal-Context U-Net (TC-U-Net) model to emulate hourly surface-layer nitrate from the Community Multiscale Air Quality (CMAQ) model over China in July and December (2011–2020). Built on an attention-integrated architecture, TC-U-Net uses inputs from the target and preceding 2 h to capture rapid atmospheric changes and summarizes the preceding 96 h to represent multiday accumulation and dispersion. Incorporating temporal contexts enabled TC-U-Net to reproduce the spatiotemporal variations of CMAQ nitrate and improve high-concentration simulations, yielding higher accuracy than the common baseline models. Emission-reduction experiments captured the national-mean nitrate decreases in July but underestimated magnitudes, while agreement was limited for January NOx responses outside the model-development months. Diagnosis of TC-U-Net prediction residuals revealed statistical associations with other CMAQ outputs, including gaseous NH3 and particle-phase H+ mass concentration. Adding these variables improved prediction accuracy in exploratory tests, suggesting potential benefits from additional information on atmospheric chemical conditions. These findings motivate future development using explicit chemical constraints and diverse CMAQ emission-reduction training scenarios.
- 2 October 2026
- Published by American Chemical Society (ACS) in Environmental Science & Technology Letters
- Vol. 13 (10) , 1375-1381
Development and Diagnosis of a Temporal-Context U-Net Deep Learning Surrogate Model for CMAQ Particulate Nitrate over China
Nitrate is a major inorganic component of fine particulate matter, yet simulating it via chemical transport models (CTMs) is computationally intensive. Deep learning surrogates have emerged as efficient tools for approximating CTMs. Here, we developed a Temporal-Context U-Net (TC-U-Net) model to emulate hourly surface-layer nitrate from the Community Multiscale Air Quality (CMAQ) model over China in July and December (2011–2020). Built on an attention-integrated architecture, TC-U-Net uses inputs from the target and preceding 2 h to capture rapid atmospheric changes and summarizes the preceding 96 h to represent multiday accumulation and dispersion. Incorporating temporal contexts enabled TC-U-Net to reproduce the spatiotemporal variations of CMAQ nitrate and improve high-concentration simulations, yielding higher accuracy than the common baseline models. Emission-reduction experiments captured the national-mean nitrate decreases in July but underestimated magnitudes, while agreement was limited for January NOx responses outside the model-development months. Diagnosis of TC-U-Net prediction residuals revealed statistical associations with other CMAQ outputs, including gaseous NH3 and particle-phase H+ mass concentration. Adding these variables improved prediction accuracy in exploratory tests, suggesting potential benefits from additional information on atmospheric chemical conditions. These findings motivate future development using explicit chemical constraints and diverse CMAQ emission-reduction training scenarios.
- Open Access
- 17 September 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 131 (18)
Improved WRF‐Chem Simulations of Dust Deposition and Its Association With Observed Chlorophyll‐a Concentration During the 2021 East Asian Super Dust Storm
Frequent dust storms in spring not only affect air quality and climate change, but also influence marine productivity through dust transport and deposition in High‐Nutrient, Low‐Chlorophyll (HNLC) regions. However, there is still considerable uncertainty regarding how dust quantitatively affects the growth of phytoplankton. This study refined the surface erodibility factor in the WRF‐Chem (Weather Research and Forecasting model coupled with Chemistry) model, improving the simulation accuracy of dust emission, transport and deposition. Using this improved model and satellite observations, we investigated the relationship between dust deposition and chlorophyll‐a (Chl‐a) concentration in the Northwest Pacific following the 2021 East Asian super dust storm. Results showed that the super dust storm increased dust deposition flux in the ROI (Region of Interest) by 66.67% (0.15 μg m −2 s −1 ) compared with the historical average for 11 March–9 April during 2011–2020. Correspondingly, Chl‐a concentration increased by 25.71% (0.88 mg m −3 ) and exhibited a clear temporal lag after dust deposition. Variations in the FLH/Chl‐a (fluorescence line height per unit Chl‐a) ratio suggested enhanced phytoplankton physiological activity after the dust deposition. Meanwhile, relatively high SST (sea surface temperature) and PAR (photosynthetically active radiation), together with shallower MLD (mixed layer depth) conditions, may also have provided favorable environmental conditions for phytoplankton growth. These results suggest that the Chl‐a concentration enhancement was likely associated with the combined effects of dust deposition and marine environmental factors. This study provides an effective approach for improving dust simulations and advances the understanding of how atmospheric dust deposition affects marine ecosystems.
- 17 September 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 131 (18)
Open AccessImproved WRF‐Chem Simulations of Dust Deposition and Its Association With Observed Chlorophyll‐a Concentration During the 2021 East Asian Super Dust Storm
Frequent dust storms in spring not only affect air quality and climate change, but also influence marine productivity through dust transport and deposition in High‐Nutrient, Low‐Chlorophyll (HNLC) regions. However, there is still considerable uncertainty regarding how dust quantitatively affects the growth of phytoplankton. This study refined the surface erodibility factor in the WRF‐Chem (Weather Research and Forecasting model coupled with Chemistry) model, improving the simulation accuracy of dust emission, transport and deposition. Using this improved model and satellite observations, we investigated the relationship between dust deposition and chlorophyll‐a (Chl‐a) concentration in the Northwest Pacific following the 2021 East Asian super dust storm. Results showed that the super dust storm increased dust deposition flux in the ROI (Region of Interest) by 66.67% (0.15 μg m −2 s −1 ) compared with the historical average for 11 March–9 April during 2011–2020. Correspondingly, Chl‐a concentration increased by 25.71% (0.88 mg m −3 ) and exhibited a clear temporal lag after dust deposition. Variations in the FLH/Chl‐a (fluorescence line height per unit Chl‐a) ratio suggested enhanced phytoplankton physiological activity after the dust deposition. Meanwhile, relatively high SST (sea surface temperature) and PAR (photosynthetically active radiation), together with shallower MLD (mixed layer depth) conditions, may also have provided favorable environmental conditions for phytoplankton growth. These results suggest that the Chl‐a concentration enhancement was likely associated with the combined effects of dust deposition and marine environmental factors. This study provides an effective approach for improving dust simulations and advances the understanding of how atmospheric dust deposition affects marine ecosystems.
- Open Access
- 5 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-39
Comment on egusphere-2026-3573
Dust episodes facilitate the long-range transport of crustal materials (CM), thereby increasing their contribution to particulate matter and influencing secondary inorganic aerosol (SNA) formation through changes in particle acidity. However, variations in precursor emissions, meteorological conditions, and particle acidity along dust transport pathways may cause the effects of dust input on SNA formation to differ among cities. Such intercity variability during the same regional dust episode remains insufficiently investigated. To address this gap, synchronous observations were conducted in seven cities in central China during a regional dust episode in April 2023. The results showed that, across the seven cities, the mean contribution of CM to PM2.5 increased from 22.6 % on clean days to 53.2 % on dust days. Correspondingly, particle pH generally increased to 4.24–4.94 during the dust episode, mainly driven by non-volatile cations such as Ca2+ and Mg2+. Calculations of aqueous-phase sulfate formation rates indicated that transition metal ion (TMI) catalyzed oxidation consistently dominated sulfate formation. However, this pathway was generally suppressed during the dust episode as particle pH increased. Although the O3 and NO2 oxidation pathways were enhanced, their increases could not offset the decrease in the TMI-catalyzed pathway. In contrast, elevated particle pH promoted nitrate partitioning. In cities with relatively low clean-day pH values within the rapid-response range of ɛ(NO3- ), even a non-maximum dust-induced pH increase could result in a pronounced increase in particulate nitrate. Therefore, future nitrate pollution control should consider the coordinated management of NOx emissions and fugitive dust sources.
- 5 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-39
Open AccessComment on egusphere-2026-3573
Dust episodes facilitate the long-range transport of crustal materials (CM), thereby increasing their contribution to particulate matter and influencing secondary inorganic aerosol (SNA) formation through changes in particle acidity. However, variations in precursor emissions, meteorological conditions, and particle acidity along dust transport pathways may cause the effects of dust input on SNA formation to differ among cities. Such intercity variability during the same regional dust episode remains insufficiently investigated. To address this gap, synchronous observations were conducted in seven cities in central China during a regional dust episode in April 2023. The results showed that, across the seven cities, the mean contribution of CM to PM2.5 increased from 22.6 % on clean days to 53.2 % on dust days. Correspondingly, particle pH generally increased to 4.24–4.94 during the dust episode, mainly driven by non-volatile cations such as Ca2+ and Mg2+. Calculations of aqueous-phase sulfate formation rates indicated that transition metal ion (TMI) catalyzed oxidation consistently dominated sulfate formation. However, this pathway was generally suppressed during the dust episode as particle pH increased. Although the O3 and NO2 oxidation pathways were enhanced, their increases could not offset the decrease in the TMI-catalyzed pathway. In contrast, elevated particle pH promoted nitrate partitioning. In cities with relatively low clean-day pH values within the rapid-response range of ɛ(NO3- ), even a non-maximum dust-induced pH increase could result in a pronounced increase in particulate nitrate. Therefore, future nitrate pollution control should consider the coordinated management of NOx emissions and fugitive dust sources.
- Open Access
- 24 July 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 131 (14)
Simulation of Global Cloud Water Acidity Based on the Adaptive Damped Newton's Method
Cloud water pH is a critical parameter in atmospheric chemistry, regulating the phase partitioning of semivolatile species, the dissolution of trace metals, and the kinetic processes of aqueous‐phase reactions, thereby influencing secondary aerosol formation and aerosol‐cloud‐radiation interactions. Current approaches for calculating cloud water acidity in widely used atmospheric chemistry numerical models range from the early fixed‐value assumption and analytical solutions (e.g., Cardano's Formula for cubic equations) to iterative techniques such as the bisection and standard Newton's methods. However, these existing approaches often struggle to maintain a balance between computational efficiency, numerical stability, and the ability to generalize across diverse and highly nonlinear chemical regimes. In this study, we developed an adaptive damped Newton's method by introducing a dynamic step‐size damping factor. This method retains the rapid convergence feature of the standard Newton's method while ensuring robust global numerical stability. Our results demonstrate that the adaptive damped Newton's method effectively eliminates unphysical cloud pH overestimations and the subsequent overestimation of sulfate production rates in regions enriched with alkaline dust and sea salt. This work offers a robust and scalable numerical framework that enhances the fidelity of cloud pH calculations across varying spatial scales—from mechanistic box models to global chemical transport models—thereby refining our understanding of pH‐dependent atmospheric processes and the non‐linear evolution of secondary aerosols.
- 24 July 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 131 (14)
Open AccessSimulation of Global Cloud Water Acidity Based on the Adaptive Damped Newton's Method
Cloud water pH is a critical parameter in atmospheric chemistry, regulating the phase partitioning of semivolatile species, the dissolution of trace metals, and the kinetic processes of aqueous‐phase reactions, thereby influencing secondary aerosol formation and aerosol‐cloud‐radiation interactions. Current approaches for calculating cloud water acidity in widely used atmospheric chemistry numerical models range from the early fixed‐value assumption and analytical solutions (e.g., Cardano's Formula for cubic equations) to iterative techniques such as the bisection and standard Newton's methods. However, these existing approaches often struggle to maintain a balance between computational efficiency, numerical stability, and the ability to generalize across diverse and highly nonlinear chemical regimes. In this study, we developed an adaptive damped Newton's method by introducing a dynamic step‐size damping factor. This method retains the rapid convergence feature of the standard Newton's method while ensuring robust global numerical stability. Our results demonstrate that the adaptive damped Newton's method effectively eliminates unphysical cloud pH overestimations and the subsequent overestimation of sulfate production rates in regions enriched with alkaline dust and sea salt. This work offers a robust and scalable numerical framework that enhances the fidelity of cloud pH calculations across varying spatial scales—from mechanistic box models to global chemical transport models—thereby refining our understanding of pH‐dependent atmospheric processes and the non‐linear evolution of secondary aerosols.