Hongyu Ni
Hongyu Ni has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Wenxu Yan
Jiangnan University
7 shared publications - Wenyuan Wang
Jiangnan University
5 shared publications - Jie Chu
School of Internet of Things, Jiangnan University, Wuxi 214000, China
2 shared publications - Chun Wang
School of Internet of Things, Jiangnan University, Wuxi 214000, China
1 shared publication Dawei Liu
The School of Internet of Things Engineering, Jiangnan University, Wuxi 214122, China
1 shared publication- Feng Zhao
State Grid Shaoxing Power Supply Company, Shaoxing 312000, China
1 shared publication
Latest Publications
- Open Access
- 17 March 2025
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 16 (3) , 182
PMSM Position Sensorless Control Based on Improved Second-Order SOIFO
Due to detection errors, motor parameter deviations, and other uncertainties, traditional motor flux estimation models suffer from the complications of DC bias and high-order harmonics. To address these issues, two flux observers, the second-order generalized integrator flux observer (SOIFO) and the second-order SOIFO, are designed for position sensorless control of permanent magnet synchronous motors (PMSMs). The position sensorless control of PMSMs based on an improved second-order SOIFO is proposed in this paper. The proposed method enhances the frequency-locked loop (FLL) in the observer by introducing a double-axis frequency-locked loop (DFLL), which improves the dynamic performance and disturbance rejection capability of the flux observer. By replacing FLL with DFLL for angular frequency estimation, the method effectively eliminates second-harmonic interference while reducing estimation delays, leading to faster and more accurate rotor position estimation in the second-order SOIFO. Additionally, the improved observer demonstrates enhanced robustness against disturbances, ensuring more stable position sensorless control. The effectiveness of the proposed approach is validated through both simulations and experimental comparisons.
- 17 March 2025
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 16 (3) , 182
Open AccessPMSM Position Sensorless Control Based on Improved Second-Order SOIFO
Due to detection errors, motor parameter deviations, and other uncertainties, traditional motor flux estimation models suffer from the complications of DC bias and high-order harmonics. To address these issues, two flux observers, the second-order generalized integrator flux observer (SOIFO) and the second-order SOIFO, are designed for position sensorless control of permanent magnet synchronous motors (PMSMs). The position sensorless control of PMSMs based on an improved second-order SOIFO is proposed in this paper. The proposed method enhances the frequency-locked loop (FLL) in the observer by introducing a double-axis frequency-locked loop (DFLL), which improves the dynamic performance and disturbance rejection capability of the flux observer. By replacing FLL with DFLL for angular frequency estimation, the method effectively eliminates second-harmonic interference while reducing estimation delays, leading to faster and more accurate rotor position estimation in the second-order SOIFO. Additionally, the improved observer demonstrates enhanced robustness against disturbances, ensuring more stable position sensorless control. The effectiveness of the proposed approach is validated through both simulations and experimental comparisons.
- 7 December 2024
- Published by Springer Nature in Signal, Image and Video Processing
- Vol. 19 (1) , 1-7
Adaptive weighted median filtering for time-varying graph signals
- 7 December 2024
- Published by Springer Nature in Signal, Image and Video Processing
- Vol. 19 (1) , 1-7
Adaptive weighted median filtering for time-varying graph signals
- 17 May 2024
- Published by Elsevier in Computers and Electrical Engineering
- Vol. 117
Flexible ground constrained LiDAR SLAM with a novel plane detection
- 17 May 2024
- Published by Elsevier in Computers and Electrical Engineering
- Vol. 117
Flexible ground constrained LiDAR SLAM with a novel plane detection
- 25 April 2024
- Published by Springer Nature in Signal, Image and Video Processing
- Vol. 18 (S1) , 703-712
A shrinkage adaptive filtering algorithm with graph filter models
- 25 April 2024
- Published by Springer Nature in Signal, Image and Video Processing
- Vol. 18 (S1) , 703-712
A shrinkage adaptive filtering algorithm with graph filter models
- Open Access
- 12 July 2023
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 14 (7) , 181
Circulating Current Suppression Strategy Based on Virtual Impedance and Repetitive Controller for Modular Multilevel Converter Upper and Lower Bridge Arm Capacitance Parameter Asymmetry Conditions
In recent years, modular multilevel converters (MMCs) have been increasingly used in the field of electric vehicle charging and discharging due to their unique performance advantages. However, the unique cascade structure of MMCs raises the problem of the circulating current. Due to chemical processes, aging effects, etc., the capacitance parameters of the upper and lower bridge arms will be asymmetric, which will introduce odd harmonics into the circulating current, increasing system losses and threatening the system reliability. To address this phenomenon, this paper proposes a circulating current suppression strategy with additional virtual impedance (VI) based on a repetitive controller (RC). The corresponding simulation models were built for the comparative study of different circulating current suppression strategies. The results show that the VI-RC circulating current suppression strategy can significantly reduce the odd and even harmonics in the circulating current under asymmetric conditions, and the total harmonic distortion (THD) of the bridge arm current is only 0.98%, which verifies the effectiveness of the proposed strategy.
- 12 July 2023
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 14 (7) , 181
Open AccessCirculating Current Suppression Strategy Based on Virtual Impedance and Repetitive Controller for Modular Multilevel Converter Upper and Lower Bridge Arm Capacitance Parameter Asymmetry Conditions
In recent years, modular multilevel converters (MMCs) have been increasingly used in the field of electric vehicle charging and discharging due to their unique performance advantages. However, the unique cascade structure of MMCs raises the problem of the circulating current. Due to chemical processes, aging effects, etc., the capacitance parameters of the upper and lower bridge arms will be asymmetric, which will introduce odd harmonics into the circulating current, increasing system losses and threatening the system reliability. To address this phenomenon, this paper proposes a circulating current suppression strategy with additional virtual impedance (VI) based on a repetitive controller (RC). The corresponding simulation models were built for the comparative study of different circulating current suppression strategies. The results show that the VI-RC circulating current suppression strategy can significantly reduce the odd and even harmonics in the circulating current under asymmetric conditions, and the total harmonic distortion (THD) of the bridge arm current is only 0.98%, which verifies the effectiveness of the proposed strategy.
- Open Access
- 14 March 2023
- Published by MDPI AG in Information
- Vol. 14 (3) , 180
Localization of False Data Injection Attack in Smart Grids Based on SSA-CNN
In recent years, smart grids have integrated information and communication technologies into power networks, which brings new network security issues. Among the existing cyberattacks, the false data injection attack (FDIA) compromises state estimation in smart grids by injecting false data into the meter measurements, which adversely affects the smart grids. Current studies on FDIAs mainly focus on the detection of its existence, but there are few studies on its localization. Most attack localization methods have difficulty locating the specific bus or line that is under attack quickly and accurately, have high computational complexity and are difficult to apply to large power networks. Therefore, this paper proposes a localization method for FDIAs that is based on a convolutional neural network and optimized with a sparrow search algorithm (SSA–CNN). Based on the physical meaning of measurement vectors, the proposed method can precisely locate a specific bus or line with relatively low computational complexity. To address the difficulty of selecting hyperparameters in the CNN, which leads to the degradation of localization accuracy, a SSA is used to optimize the hyperparameters of the CNN so that the hyperparameters are optimal when using the model for localization. Finally, simulation experiments are conducted on IEEE14-bus and IEEE118-bus test systems, and the simulation results show that the method proposed in this paper has a high localization accuracy and can largely reduce the false-alarm rate.
- 14 March 2023
- Published by MDPI AG in Information
- Vol. 14 (3) , 180
Open AccessLocalization of False Data Injection Attack in Smart Grids Based on SSA-CNN
In recent years, smart grids have integrated information and communication technologies into power networks, which brings new network security issues. Among the existing cyberattacks, the false data injection attack (FDIA) compromises state estimation in smart grids by injecting false data into the meter measurements, which adversely affects the smart grids. Current studies on FDIAs mainly focus on the detection of its existence, but there are few studies on its localization. Most attack localization methods have difficulty locating the specific bus or line that is under attack quickly and accurately, have high computational complexity and are difficult to apply to large power networks. Therefore, this paper proposes a localization method for FDIAs that is based on a convolutional neural network and optimized with a sparrow search algorithm (SSA–CNN). Based on the physical meaning of measurement vectors, the proposed method can precisely locate a specific bus or line with relatively low computational complexity. To address the difficulty of selecting hyperparameters in the CNN, which leads to the degradation of localization accuracy, a SSA is used to optimize the hyperparameters of the CNN so that the hyperparameters are optimal when using the model for localization. Finally, simulation experiments are conducted on IEEE14-bus and IEEE118-bus test systems, and the simulation results show that the method proposed in this paper has a high localization accuracy and can largely reduce the false-alarm rate.
- Open Access
- 5 January 2023
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 14 (1) , 17
The Suppression of Modular Multi-Level Converter Circulation Based on the PIR Virtual Impedance Strategy
In recent years, with the rise of the electric vehicle industry, there has been significant research on charging and power supply vehicle technologies for electric vehicles. In terms of the corresponding converter usage, modular multi-level converters (MMCs) are also increasingly used in the field of electric vehicle power supply research because of their unique advantages. However, the circulating current problem of MMCs has not been effectively addressed in existing domestic and international studies. In this paper, we propose a proportional-integral resonant (PIR) control method combined with virtual impedance for the optimal suppression of the MMC internal circulating current problem based on the comparison and generalization of the existing methods. Based on the analysis of the working principle of MMCs, this paper proposes and adopts the control strategy of combining virtual impedance and proportional-integral resonance to suppress the circulating current and builds a simulation model in MATLAB to verify that the control strategy proposed in this paper is feasible.
- 5 January 2023
- Published by MDPI AG in World Electric Vehicle Journal
- Vol. 14 (1) , 17
Open AccessThe Suppression of Modular Multi-Level Converter Circulation Based on the PIR Virtual Impedance Strategy
In recent years, with the rise of the electric vehicle industry, there has been significant research on charging and power supply vehicle technologies for electric vehicles. In terms of the corresponding converter usage, modular multi-level converters (MMCs) are also increasingly used in the field of electric vehicle power supply research because of their unique advantages. However, the circulating current problem of MMCs has not been effectively addressed in existing domestic and international studies. In this paper, we propose a proportional-integral resonant (PIR) control method combined with virtual impedance for the optimal suppression of the MMC internal circulating current problem based on the comparison and generalization of the existing methods. Based on the analysis of the working principle of MMCs, this paper proposes and adopts the control strategy of combining virtual impedance and proportional-integral resonance to suppress the circulating current and builds a simulation model in MATLAB to verify that the control strategy proposed in this paper is feasible.
- Retracted
- 10 March 2021
- Published by Springer Nature in Journal of Ambient Intelligence and Humanized Computing
- Vol. 15 (S1) , 181
RETRACTED ARTICLE: Sliding-mode control of gantry crane system with recursive least square parameters identification
- 10 March 2021
- Published by Springer Nature in Journal of Ambient Intelligence and Humanized Computing
- Vol. 15 (S1) , 181
RetractedRETRACTED ARTICLE: Sliding-mode control of gantry crane system with recursive least square parameters identification