Katsuyo Thornton
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Katsuyo Thornton has a total of 276 co-authors. Here are the top co-authors by number of shared publications:
Hui-Chia Yu
7 shared publications- Ashwin J. Shahani
University of Michigan
6 shared publications - Guanglong Huang
Department of Materials Science and Engineering, University of Michigan, Ann Arbor, Michigan 48109, United States
6 shared publications - Stephen DeWitt
Oak Ridge National Laboratory
6 shared publications David Montiel
University of Michigan
5 shared publications- David Montiel
Department of Materials Science and Engineering, University of Michigan, Ann Arbor, MI 48109, USA
5 shared publications
Latest Publications
- Open Access
- 4 November 2026
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
Phase-field simulations of nucleation, growth, and coarsening of β 1 precipitates in Mg–Nd alloys
The spatial distribution and morphology of precipitates formed during aging are key factors that determine the precipitation-hardening response of various magnesium–rare-earth alloys. In recent years, the use of high-performance computing clusters and massively parallel frameworks has enabled quantitative simulations of the evolution of individual and multiple precipitates at relevant length and time scales. However, predictive modeling of precipitate evolution remains challenging, in part because many key thermodynamic and kinetic parameters governing the underlying physics are either unknown or have a high degree of uncertainty. In this work, we developed a workflow in which experimental data were used to parameterize a phase-field model to perform two-dimensional (2D) simulations of concurrent nucleation and evolution of β 1 precipitates in magnesium–neodymium alloy during aging. Matrix composition and precipitate number density at different aging times were obtained from atom probe tomography and transmission electron microscopy measurements, respectively. We applied a stereological method to estimate the three-dimensional (3D) number densities from experimental cross-sectional transmission electron micrographs. The estimated 3D number density data were then converted to effective 2D number densities. The effective 2D number density and composition data were used to determine the required model parameters by minimizing the discrepancy between simulation and experimental results. The parameterized model enables quantitative phase-field simulations of nucleation and growth of β 1 precipitates, which can be employed to optimize aging time to achieve a target number density of precipitates. This work demonstrates a strategy to overcome the challenges associated with parameterizing a coupled phase-field and nucleation model.
- 4 November 2026
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
Open AccessPhase-field simulations of nucleation, growth, and coarsening of β 1 precipitates in Mg–Nd alloys
The spatial distribution and morphology of precipitates formed during aging are key factors that determine the precipitation-hardening response of various magnesium–rare-earth alloys. In recent years, the use of high-performance computing clusters and massively parallel frameworks has enabled quantitative simulations of the evolution of individual and multiple precipitates at relevant length and time scales. However, predictive modeling of precipitate evolution remains challenging, in part because many key thermodynamic and kinetic parameters governing the underlying physics are either unknown or have a high degree of uncertainty. In this work, we developed a workflow in which experimental data were used to parameterize a phase-field model to perform two-dimensional (2D) simulations of concurrent nucleation and evolution of β 1 precipitates in magnesium–neodymium alloy during aging. Matrix composition and precipitate number density at different aging times were obtained from atom probe tomography and transmission electron microscopy measurements, respectively. We applied a stereological method to estimate the three-dimensional (3D) number densities from experimental cross-sectional transmission electron micrographs. The estimated 3D number density data were then converted to effective 2D number densities. The effective 2D number density and composition data were used to determine the required model parameters by minimizing the discrepancy between simulation and experimental results. The parameterized model enables quantitative phase-field simulations of nucleation and growth of β 1 precipitates, which can be employed to optimize aging time to achieve a target number density of precipitates. This work demonstrates a strategy to overcome the challenges associated with parameterizing a coupled phase-field and nucleation model.
- Open Access
- 24 August 2026
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
- Vol. 34 (6) , 063301
Roadmap on novel computational approaches for bridging length and time scales: addressing challenges in modeling processes, characterization, and performance of metals and alloys
The response of metals and alloys depends on a wide range of factors ranging from composition and point defects, to larger defects such as dislocations and/or precipitates, and aspects such as the grain size, texture or other microstructural factors. Furthermore, how a material is processed and then subsequently loaded can also strongly influence material behavior. Combined, these aspects span length and time scales that vary by several orders of magnitude, providing a grand challenge to any single modeling approach. Consequently, over the past decades, multiscale modeling (MM) has emerged as a foundational tool for investigating and predicting the performance. While much development has been done, there are still open challenges in how methods bridge across different time and/or length scales, how we inform, validate, and understand complex material behavior, and more recently how emerging machine learning and artificial intelligence tools can enhance our MM approaches. Addressing these challenges and the outlook for MM on the horizon is the focus of this roadmap article. The contributions within are divided broadly into three categories: bridging the length scale gap between models, targeting timescale gaps alongside length scale gaps, and bridging the gap between experiment and simulation.
- 24 August 2026
- Published by IOP Publishing in Modelling and Simulation in Materials Science and Engineering
- Vol. 34 (6) , 063301
Open AccessRoadmap on novel computational approaches for bridging length and time scales: addressing challenges in modeling processes, characterization, and performance of metals and alloys
The response of metals and alloys depends on a wide range of factors ranging from composition and point defects, to larger defects such as dislocations and/or precipitates, and aspects such as the grain size, texture or other microstructural factors. Furthermore, how a material is processed and then subsequently loaded can also strongly influence material behavior. Combined, these aspects span length and time scales that vary by several orders of magnitude, providing a grand challenge to any single modeling approach. Consequently, over the past decades, multiscale modeling (MM) has emerged as a foundational tool for investigating and predicting the performance. While much development has been done, there are still open challenges in how methods bridge across different time and/or length scales, how we inform, validate, and understand complex material behavior, and more recently how emerging machine learning and artificial intelligence tools can enhance our MM approaches. Addressing these challenges and the outlook for MM on the horizon is the focus of this roadmap article. The contributions within are divided broadly into three categories: bridging the length scale gap between models, targeting timescale gaps alongside length scale gaps, and bridging the gap between experiment and simulation.
- Open Access
- 10 June 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (42) , 28438-28446
Mitigating Ni migration in solid oxide electrolysis by altering Ni-YSZ electrode composition
Nickel migration in nickel-yttria stabilized zirconia (Ni-YSZ) fuel electrodes is a significant degradation mechanism limiting the lifetime of solid oxide electrolysis cells, but the factors that control Ni migration are not well understood. Here, we demonstrate that the Ni/YSZ ratio plays an important role in Ni migration. Ni distribution was compared before and after electrolysis operation in 85% H2O – 15% H2, 800 °C, −1 A cm−2 for 500 hours. After testing, clear Ni depletion was observed near the electrolyte in the electrode with an initial 70 wt% NiO content (∼38 vol% Ni, 35 vol% YSZ, 27 vol% pore in the reduced electrode), whereas no Ni depletion was observed in the electrode with an initial 50 wt% NiO content (∼26 vol% Ni, 57 vol% YSZ, 17 vol% pore in the reduced electrode). Two mechanisms are proposed to explain this effect. First, the lower Ni content electrode exhibited ∼45% lower polarization resistance (0.30 vs. 0.54 Ω cm2 at 800 °C), reducing the overpotential driving force for migration. Second, 3D microstructural reconstruction revealed that the low-Ni electrode possessed substantially smaller and more isolated surface area per unit volume of Ni-pore interfaces (average z-length 0.97 µm vs. 2.43 µm), which limited the ability of Ni to migrate via surface diffusion across appreciable distances. These findings provide clear design principles for improving SOEC durability through composition optimization.
- 10 June 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (42) , 28438-28446
Open AccessMitigating Ni migration in solid oxide electrolysis by altering Ni-YSZ electrode composition
Nickel migration in nickel-yttria stabilized zirconia (Ni-YSZ) fuel electrodes is a significant degradation mechanism limiting the lifetime of solid oxide electrolysis cells, but the factors that control Ni migration are not well understood. Here, we demonstrate that the Ni/YSZ ratio plays an important role in Ni migration. Ni distribution was compared before and after electrolysis operation in 85% H2O – 15% H2, 800 °C, −1 A cm−2 for 500 hours. After testing, clear Ni depletion was observed near the electrolyte in the electrode with an initial 70 wt% NiO content (∼38 vol% Ni, 35 vol% YSZ, 27 vol% pore in the reduced electrode), whereas no Ni depletion was observed in the electrode with an initial 50 wt% NiO content (∼26 vol% Ni, 57 vol% YSZ, 17 vol% pore in the reduced electrode). Two mechanisms are proposed to explain this effect. First, the lower Ni content electrode exhibited ∼45% lower polarization resistance (0.30 vs. 0.54 Ω cm2 at 800 °C), reducing the overpotential driving force for migration. Second, 3D microstructural reconstruction revealed that the low-Ni electrode possessed substantially smaller and more isolated surface area per unit volume of Ni-pore interfaces (average z-length 0.97 µm vs. 2.43 µm), which limited the ability of Ni to migrate via surface diffusion across appreciable distances. These findings provide clear design principles for improving SOEC durability through composition optimization.
- Open Access
- 22 April 2026
- Published by Elsevier in Computational Materials Science
- Vol. 269
Benchmarking of massively parallel phase-field codes for directional solidification
- 22 April 2026
- Published by Elsevier in Computational Materials Science
- Vol. 269
Open AccessBenchmarking of massively parallel phase-field codes for directional solidification
- Open AccessPhase-field simulations of nucleation, growth, and coarsening of $β_1$ precipitates in Mg-Nd alloysThe spatial distribution and morphology of precipitates formed during aging are key factors that determine the precipitation hardening response of various magnesium-rare earth alloys. In recent years, the use of high-performance computing clusters and massively parallel frameworks has enabled quantitative simulations of the evolution of individual and multiple precipitates at relevant length and time scales. However, predictive modeling of precipitate evolution remains challenging, in part because many key thermodynamic and kinetic parameters governing the underlying physics are either unknown or have a high degree of uncertainty. In this work, we developed a workflow in which experimental data were used to parameterize a phase-field model to perform two-dimensional (2D) simulations of concurrent nucleation and evolution of $β_1$ precipitates in magnesium-neodymium alloy during aging. Matrix composition and precipitate number density at different aging times were obtained from atom probe tomography and transmission electron microscopy measurements, respectively. We applied a stereological method to estimate the three-dimensional (3D) number densities from experimental cross-sectional transmission electron micrographs. The estimated 3D number density data were then converted to effective 2D number densities. The effective 2D number density and composition data were used to determine the required model parameters by minimizing the discrepancy between simulation and experimental results. The parameterized model allows for quantitative phase-field simulations of nucleation and growth of $β_1$ precipitates, which can be employed to optimize aging time to achieve a target number density of precipitates. This work highlights an approach to overcome the challenges associated with parameterizing a coupled phase-field and nucleation model.Open AccessPhase-field simulations of nucleation, growth, and coarsening of $β_1$ precipitates in Mg-Nd alloysThe spatial distribution and morphology of precipitates formed during aging are key factors that determine the precipitation hardening response of various magnesium-rare earth alloys. In recent years, the use of high-performance computing clusters and massively parallel frameworks has enabled quantitative simulations of the evolution of individual and multiple precipitates at relevant length and time scales. However, predictive modeling of precipitate evolution remains challenging, in part because many key thermodynamic and kinetic parameters governing the underlying physics are either unknown or have a high degree of uncertainty. In this work, we developed a workflow in which experimental data were used to parameterize a phase-field model to perform two-dimensional (2D) simulations of concurrent nucleation and evolution of $β_1$ precipitates in magnesium-neodymium alloy during aging. Matrix composition and precipitate number density at different aging times were obtained from atom probe tomography and transmission electron microscopy measurements, respectively. We applied a stereological method to estimate the three-dimensional (3D) number densities from experimental cross-sectional transmission electron micrographs. The estimated 3D number density data were then converted to effective 2D number densities. The effective 2D number density and composition data were used to determine the required model parameters by minimizing the discrepancy between simulation and experimental results. The parameterized model allows for quantitative phase-field simulations of nucleation and growth of $β_1$ precipitates, which can be employed to optimize aging time to achieve a target number density of precipitates. This work highlights an approach to overcome the challenges associated with parameterizing a coupled phase-field and nucleation model.
- 15 January 2026
- Published by American Chemical Society (ACS) in ACS Electrochemistry
- Vol. 2 (2) , 384-393
Operando Detection of Void Formation during Lithium Stripping in Solid-State Batteries Using Single-Frequency Impedance Analysis
- 15 January 2026
- Published by American Chemical Society (ACS) in ACS Electrochemistry
- Vol. 2 (2) , 384-393
Operando Detection of Void Formation during Lithium Stripping in Solid-State Batteries Using Single-Frequency Impedance Analysis
- Open Access
- 31 December 2025
- Published by Elsevier in Acta Materialia
- Vol. 306
A graph-based approach for tracking grains in time-resolved 2D/3D microstructural datasets
- 31 December 2025
- Published by Elsevier in Acta Materialia
- Vol. 306
Open AccessA graph-based approach for tracking grains in time-resolved 2D/3D microstructural datasets
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (54) , 2582
Enabling Fast Charging of Li-Ion Batteries by Elucidating the Origin of Enhanced Rate Capabilities in Hybrid and Patterned Anodes via Simulations
Fast-charging capabilities greater than 4C is required for wider adoption of electric vehicles. In this work, we combine cell-scale simulations of the charging process and their analysis to elucidate the limiting factor for fast charging and to identify approaches to address these limitations. Two anode designs are considered. The first is the highly ordered laser-patterned electrode, wherein a periodic array of channels are introduced to graphite anode to facilitate ionic transport. The second is the hybrid anode, in which a mixture of graphite and hard carbon are used as the active material. Both of these types of anodes have exhibited fast-charge capability and excellent capacity retention. We examined the effect of the two designs on the homogeneity of the reaction current density distribution using finite-element-based modeling. Through these simulations, the observed improvements in the rate performance were determined to be a result of the homogenization of the reaction current density distribution within the anodes. Such an improvement in the homogeneity enables higher electrode utilization and therefore a lower overpotential required for fast charge. As a result of the reduction in the peak reaction current density, the propensity for Li plating is diminished in the anode, which ultimately lead to the superior capacity retention of cells with the modified anodes. We employ the second Damköhler number for the anodes to quantify this effect, and we develop a semi-analytical model that is computationally efficient. Finally, for the hybrid anode, we apply the regression tree analysis (RTA) to determine the important factors that enable the fast charging. The RTA result indicates that, for this system, the effective electrolyte transport properties of Li ions and the open circuit voltage profiles of the active materials are important.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (54) , 2582
Enabling Fast Charging of Li-Ion Batteries by Elucidating the Origin of Enhanced Rate Capabilities in Hybrid and Patterned Anodes via Simulations
Fast-charging capabilities greater than 4C is required for wider adoption of electric vehicles. In this work, we combine cell-scale simulations of the charging process and their analysis to elucidate the limiting factor for fast charging and to identify approaches to address these limitations. Two anode designs are considered. The first is the highly ordered laser-patterned electrode, wherein a periodic array of channels are introduced to graphite anode to facilitate ionic transport. The second is the hybrid anode, in which a mixture of graphite and hard carbon are used as the active material. Both of these types of anodes have exhibited fast-charge capability and excellent capacity retention. We examined the effect of the two designs on the homogeneity of the reaction current density distribution using finite-element-based modeling. Through these simulations, the observed improvements in the rate performance were determined to be a result of the homogenization of the reaction current density distribution within the anodes. Such an improvement in the homogeneity enables higher electrode utilization and therefore a lower overpotential required for fast charge. As a result of the reduction in the peak reaction current density, the propensity for Li plating is diminished in the anode, which ultimately lead to the superior capacity retention of cells with the modified anodes. We employ the second Damköhler number for the anodes to quantify this effect, and we develop a semi-analytical model that is computationally efficient. Finally, for the hybrid anode, we apply the regression tree analysis (RTA) to determine the important factors that enable the fast charging. The RTA result indicates that, for this system, the effective electrolyte transport properties of Li ions and the open circuit voltage profiles of the active materials are important.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (2) , 290
Simulating Electrochemical Impedance Spectroscopy to Enable Early Void Detection
Electrochemical impedance spectroscopy shows potential as a tool for the detection and characterization of voids in solid-state batteries, but scanning all relevant frequencies is time consuming and may be impossible for very high or low frequencies. The situation would be greatly simplified if the most important information could be obtained by measuring at a single frequency. To determine whether this is feasible, we use a simple yet powerful model in which we assign a complex conductivity to the electrolyte bulk and Li/electrolyte interface that mimics the impedance of a resistor and constant-phase element in parallel. We may then place a void at the interface, allowing us to capture the effects of current constriction. The model was employed to simulate the impedance response of a Li metal/LPSCl cell with voids of varying void area fraction and spacing. The simulations show that a single measurement at the characteristic frequency of the interface, which is related to the product of interfacial resistance and capacitance, can give detailed information on the interfacial voids present. The imaginary part of impedance at this frequency is clearly correlated with void fraction. Once void fraction is known, the real part of impedance can give information on the void number density. These findings are supported by experiments from our collaborators. The model employed has applications beyond void detection and may be used to determine impedance responses in a variety of cases where current constriction is important.
- 24 November 2025
- Published by The Electrochemical Society in ECS Meeting Abstracts
- Vol. MA2025-02 (2) , 290
Simulating Electrochemical Impedance Spectroscopy to Enable Early Void Detection
Electrochemical impedance spectroscopy shows potential as a tool for the detection and characterization of voids in solid-state batteries, but scanning all relevant frequencies is time consuming and may be impossible for very high or low frequencies. The situation would be greatly simplified if the most important information could be obtained by measuring at a single frequency. To determine whether this is feasible, we use a simple yet powerful model in which we assign a complex conductivity to the electrolyte bulk and Li/electrolyte interface that mimics the impedance of a resistor and constant-phase element in parallel. We may then place a void at the interface, allowing us to capture the effects of current constriction. The model was employed to simulate the impedance response of a Li metal/LPSCl cell with voids of varying void area fraction and spacing. The simulations show that a single measurement at the characteristic frequency of the interface, which is related to the product of interfacial resistance and capacitance, can give detailed information on the interfacial voids present. The imaginary part of impedance at this frequency is clearly correlated with void fraction. Once void fraction is known, the real part of impedance can give information on the void number density. These findings are supported by experiments from our collaborators. The model employed has applications beyond void detection and may be used to determine impedance responses in a variety of cases where current constriction is important.