Mert Ali Özel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mert Ali Özel has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Eren Murtulu
SEGER Ses ve Elektrikli Gereçler San.A.Ş, Bursa, Türkiye
2 shared publications - Hikmet Karşıyaka
SEGER Ses ve Elektrikli Gereçler San.A.Ş, Bursa, Türkiye
2 shared publications - Ahmet Yildiz
Bursa Uludag Universitesi
1 shared publication - Gürsel Şefkat
Bursa Uludag Universitesi
1 shared publication - İbRahim Uysal
SEGER Ses ve Elektrikli Gereçler San.A.Ş
1 shared publication - Osman Kopmaz
Aeronautical Engineering Department, Istanbul Gelisim University, Avcılar, 34310 Istanbul, Türkiye, Turkey (Türkiye)
1 shared publication
Latest Publications
- 30 September 2026
- Published by Harran University in Harran Üniversitesi Mühendislik Dergisi
- Vol. 11 (3) , 218-228
Lokal Kütle Konumunun Ses İletim Performansına Etkisinin İncelenmesi
Bu çalışma, hafif polimer esaslı yapılarda lokal (yerel) kütle dağılımının vibro-akustik performans üzerindeki belirleyici rolünü, 3 mm kalınlığındaki daire biçimli bir PLA plaka üzerinden sistematik olarak incelemektedir. Geleneksel hoparlörlere seçenek olarak gelişen ses uyarıcılarının (exciter) verimliliğini artırmayı hedefleyen araştırmada, asimetrik modların uyarılması amacıyla eksantrik (merkez dışı) bir bağlantı yapısı tercih edilmiştir. 0–5000 Hz frekans bandında gerçekleştirilen ardışık modal, harmonik yapısal ve harmonik akustik analizler, plaka üzerindeki 200 gramlık lokal kütlenin 8 farklı konumdaki etkisini ortaya koymaktadır. Elde edilen veriler, kütle yerleşiminin sadece titreşim genliğini değil, aynı zamanda akustik ses iletim verimini de doğrudan yönettiğini kanıtlamaktadır. Analiz sonuçlarına göre, lokal kütlenin stratejik konumlandırılmasıyla ses basınç seviyesinde (SPL– Sound Pressure Level) belirli frekans bantlarında hedeflenen artışların veya mod baskılanması yoluyla azalışların sağlanabildiği görülmüştür. Örneğin, kütle konumu değişiminin SPL bazında ise yaklaşık 8 dB’lik bir varyasyona neden olduğu tespit edilmiştir. Bu araştırma, lokal kütle yerleşiminin rastgele bir yapısal yükten ziyade, vibro-akustik performansı optimize eden stratejik bir tasarım değişkeni olarak kullanılabileceğini literatüre sunmaktadır.
- 30 September 2026
- Published by Harran University in Harran Üniversitesi Mühendislik Dergisi
- Vol. 11 (3) , 218-228
Lokal Kütle Konumunun Ses İletim Performansına Etkisinin İncelenmesi
Bu çalışma, hafif polimer esaslı yapılarda lokal (yerel) kütle dağılımının vibro-akustik performans üzerindeki belirleyici rolünü, 3 mm kalınlığındaki daire biçimli bir PLA plaka üzerinden sistematik olarak incelemektedir. Geleneksel hoparlörlere seçenek olarak gelişen ses uyarıcılarının (exciter) verimliliğini artırmayı hedefleyen araştırmada, asimetrik modların uyarılması amacıyla eksantrik (merkez dışı) bir bağlantı yapısı tercih edilmiştir. 0–5000 Hz frekans bandında gerçekleştirilen ardışık modal, harmonik yapısal ve harmonik akustik analizler, plaka üzerindeki 200 gramlık lokal kütlenin 8 farklı konumdaki etkisini ortaya koymaktadır. Elde edilen veriler, kütle yerleşiminin sadece titreşim genliğini değil, aynı zamanda akustik ses iletim verimini de doğrudan yönettiğini kanıtlamaktadır. Analiz sonuçlarına göre, lokal kütlenin stratejik konumlandırılmasıyla ses basınç seviyesinde (SPL– Sound Pressure Level) belirli frekans bantlarında hedeflenen artışların veya mod baskılanması yoluyla azalışların sağlanabildiği görülmüştür. Örneğin, kütle konumu değişiminin SPL bazında ise yaklaşık 8 dB’lik bir varyasyona neden olduğu tespit edilmiştir. Bu araştırma, lokal kütle yerleşiminin rastgele bir yapısal yükten ziyade, vibro-akustik performansı optimize eden stratejik bir tasarım değişkeni olarak kullanılabileceğini literatüre sunmaktadır.
- 23 September 2026
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 151 (22) , 19125-19149
User-oriented fuzzy logic–based optimization of regional thermal comfort and energy consumption in vehicle HVAC systems
- 23 September 2026
- Published by Springer Nature in Journal of Thermal Analysis and Calorimetry
- Vol. 151 (22) , 19125-19149
User-oriented fuzzy logic–based optimization of regional thermal comfort and energy consumption in vehicle HVAC systems
- 31 March 2026
- Published by Harran University in Harran Üniversitesi Mühendislik Dergisi
- Vol. 11 (1) , 18-29
Farklı Malzemelerden Üretilmiş Plakların Ses İletim Performanslarının Deneysel İncelenmesi
Bu çalışmada, aynı geometrik boyutlara sahip ancak farklı malzemelerden üretilmiş yedi adet plakanın ses iletim performansları deneysel olarak incelenmiştir. Deney düzeneğinde, 15 W, 25 W ve 40 W gücünde üç farklı ses uyarıcısı (sound exciter) kullanılarak malzeme türünün ve uyarıcı gücünün ses iletimi üzerindeki etkileri değerlendirilmiştir. Farklı malzemelerin akustik davranışları karşılaştırılmış, endüstriyel uygulamalardaki kullanım uygunlukları irdelenmiş ve güç seviyesinin ses iletim karakteristiklerine olan katkısı detaylı şekilde analiz edilmiştir. Elde edilen deneysel bulgular, malzeme seçiminin ve uyarıcı gücünün ses iletim performansında belirleyici rol oynadığını göstermekte olup, akustik tasarım süreçleri için önemli veri sağlamaktadır. Çalışma sonucunda, üç ayrı ses uyarıcısı ile titreştirilerek elde edilen ses basınç seviyeleri karşılaştırılmış ve hem malzeme sertliği–sönüm oranının hem de uyarıcı güç/empedansının akustik yanıtı belirlediği görülmüştür.
- 31 March 2026
- Published by Harran University in Harran Üniversitesi Mühendislik Dergisi
- Vol. 11 (1) , 18-29
Farklı Malzemelerden Üretilmiş Plakların Ses İletim Performanslarının Deneysel İncelenmesi
Bu çalışmada, aynı geometrik boyutlara sahip ancak farklı malzemelerden üretilmiş yedi adet plakanın ses iletim performansları deneysel olarak incelenmiştir. Deney düzeneğinde, 15 W, 25 W ve 40 W gücünde üç farklı ses uyarıcısı (sound exciter) kullanılarak malzeme türünün ve uyarıcı gücünün ses iletimi üzerindeki etkileri değerlendirilmiştir. Farklı malzemelerin akustik davranışları karşılaştırılmış, endüstriyel uygulamalardaki kullanım uygunlukları irdelenmiş ve güç seviyesinin ses iletim karakteristiklerine olan katkısı detaylı şekilde analiz edilmiştir. Elde edilen deneysel bulgular, malzeme seçiminin ve uyarıcı gücünün ses iletim performansında belirleyici rol oynadığını göstermekte olup, akustik tasarım süreçleri için önemli veri sağlamaktadır. Çalışma sonucunda, üç ayrı ses uyarıcısı ile titreştirilerek elde edilen ses basınç seviyeleri karşılaştırılmış ve hem malzeme sertliği–sönüm oranının hem de uyarıcı güç/empedansının akustik yanıtı belirlediği görülmüştür.
- Open Access
- 18 February 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (4) , 2158
Controlling and Experimental Validation of an Air Compressor System with Energy Efficient Novel Pressurized Air Cabin for Open-Cathode PEM Fuel Cell
This study investigates a novel pressurized cabin system for open-cathode proton exchange membrane (PEM) fuel cells to enhance energy efficiency and performance. The urgency of this study lies in the increase in the uniformity index (UI) and the decrease in pressure loss, which are crucial parameters of the air supply system. It optimizes the cabin’s 3D geometry using the Taguchi method, achieving a 3.68% increase in UI and a 7.69% reduction in pressure drop. A 1D mathematical model developed for system control demonstrates the pressurized cabin’s superior efficiency compared to conventional air supply systems. Experimental results validate these findings, showing around an 8% reduction in energy consumption and a 9.4% improvement in power output. These results indicate that the novel cabin design offers substantial performance benefits, making it a valuable contribution to energy-efficient fuel cell technology.
- 18 February 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (4) , 2158
Open AccessControlling and Experimental Validation of an Air Compressor System with Energy Efficient Novel Pressurized Air Cabin for Open-Cathode PEM Fuel Cell
This study investigates a novel pressurized cabin system for open-cathode proton exchange membrane (PEM) fuel cells to enhance energy efficiency and performance. The urgency of this study lies in the increase in the uniformity index (UI) and the decrease in pressure loss, which are crucial parameters of the air supply system. It optimizes the cabin’s 3D geometry using the Taguchi method, achieving a 3.68% increase in UI and a 7.69% reduction in pressure drop. A 1D mathematical model developed for system control demonstrates the pressurized cabin’s superior efficiency compared to conventional air supply systems. Experimental results validate these findings, showing around an 8% reduction in energy consumption and a 9.4% improvement in power output. These results indicate that the novel cabin design offers substantial performance benefits, making it a valuable contribution to energy-efficient fuel cell technology.
- 31 August 2024
- Published by DAAAM International in International Journal of Simulation Modelling
- Vol. 23 (3) , 447-458
Design of a Periodic Structure for Composite Helicopter Rotor Blade
- 31 August 2024
- Published by DAAAM International in International Journal of Simulation Modelling
- Vol. 23 (3) , 447-458
Design of a Periodic Structure for Composite Helicopter Rotor Blade
- Open Access
- 11 March 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (6)
A Comparative Study of Energy Consumption and Recovery of Autonomous Fuel-Cell Hydrogen–Electric Vehicles Using Different Powertrains Based on Regenerative Braking and Electronic Stability Control System
Today, with the increasing transition to electric vehicles (EVs), the design of highly energy-efficient vehicle architectures has taken precedence for many car manufacturers. To this end, the energy consumption and recovery rates of different powertrain vehicle architectures need to be investigated comprehensively. In this study, six different powertrain architectures—four independent in-wheel motors with regenerative electronic stability control (RESC) and without an RESC, one-stage gear (1G) transmission, two-stage gear (2G) transmission, continuously variable transmission (CVT) and downsized electric motor with CVT—were mathematically modeled and analyzed under real road conditions using nonlinear models of an autonomous hydrogen fuel-cell electric vehicle (HFCEV). The aims of this paper were twofold: first, to compare the energy consumption performance of powertrain architectures by analyzing the effects of the regenerative electronic stability control (RESC) system, and secondly, to investigate the usability of a downsized electrical motor for an HFCEV. For this purpose, all the numerical simulations were conducted for the well-known FTP75 and NEDC urban drive cycles. The obtained results demonstrate that the minimum energy consumption can be achieved by a 2G-based powertrain using the same motor; however, when an RESC system is used, the energy recovery/consumption rate can be increased. Moreover, the results of the article show that it is possible to use a downsized electric motor due to the CVT, and this powertrain significantly reduces the energy consumption of the HFCEV as compared to all the other systems. The results of this paper present highly significant implications for automotive manufacturers for designing and developing a cleaner electrical vehicle energy consumption and recovery system.
- 11 March 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (6)
Open AccessA Comparative Study of Energy Consumption and Recovery of Autonomous Fuel-Cell Hydrogen–Electric Vehicles Using Different Powertrains Based on Regenerative Braking and Electronic Stability Control System
Today, with the increasing transition to electric vehicles (EVs), the design of highly energy-efficient vehicle architectures has taken precedence for many car manufacturers. To this end, the energy consumption and recovery rates of different powertrain vehicle architectures need to be investigated comprehensively. In this study, six different powertrain architectures—four independent in-wheel motors with regenerative electronic stability control (RESC) and without an RESC, one-stage gear (1G) transmission, two-stage gear (2G) transmission, continuously variable transmission (CVT) and downsized electric motor with CVT—were mathematically modeled and analyzed under real road conditions using nonlinear models of an autonomous hydrogen fuel-cell electric vehicle (HFCEV). The aims of this paper were twofold: first, to compare the energy consumption performance of powertrain architectures by analyzing the effects of the regenerative electronic stability control (RESC) system, and secondly, to investigate the usability of a downsized electrical motor for an HFCEV. For this purpose, all the numerical simulations were conducted for the well-known FTP75 and NEDC urban drive cycles. The obtained results demonstrate that the minimum energy consumption can be achieved by a 2G-based powertrain using the same motor; however, when an RESC system is used, the energy recovery/consumption rate can be increased. Moreover, the results of the article show that it is possible to use a downsized electric motor due to the CVT, and this powertrain significantly reduces the energy consumption of the HFCEV as compared to all the other systems. The results of this paper present highly significant implications for automotive manufacturers for designing and developing a cleaner electrical vehicle energy consumption and recovery system.