XQXingdong Qiu

Xingdong Qiu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xingdong Qiu has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Spatiotemporal energy-managed phase transition evaporators for continuous solar desalination

    by Qian Chen, Xingdong Qiu, Rui Yang, Jinchi Li, Jun Xia, Hongbing Wang, Lihong Zhou, Yi Lu, Xiaoke Li

    Solar-driven interfacial evaporation is promising for freshwater production but constrained by solar intermittency. Herein, a 3D hierarchical phase-change composite evaporator (PPMF@OD) is constructed via a hydrogel-assisted in situ anchoring strategy for round-the-clock desalination. At the molecular scale, hydrogel polar functional groups elevate intermediate water proportions, drastically reducing the vaporization enthalpy to 1871 J·g-1. Macroscopically, an optimized 3D geometry synergizes with the embedded phase-change microcapsules to deliver exceptional spatiotemporal energy management. During illumination, endothermic microcapsule melting suppresses top-surface heat dissipation, synergizing with macroscopic sidewall environmental heat absorption to surpass theoretical evaporation limits. Conversely, in the dark, latent heat released by crystallization couples with continuous environmental energy harvesting to sustain steam generation. Benefiting from this synergy of macroscopic environmental heat harvesting and microscopic thermal energy storage and release, PPMF@OD achieves 4.89 kg·m-2·h-1 under 1 sun and 2.36 kg·m-2·h-1 in the dark. Moreover, outstanding long-term crystallization resistance can be achieved even in an extreme 20 wt.% high-salinity medium. Under realistic outdoor conditions, the system yields an outstanding daily water production of 27.37 kg·m-2. This establishes a scalable, multiphysics-coupled paradigm for all-weather desalination.

  • Open Access

    Spatiotemporal energy-managed phase transition evaporators for continuous solar desalination

    by Qian Chen, Xingdong Qiu, Rui Yang, Jinchi Li, Jun Xia, Hongbing Wang, Lihong Zhou, Yi Lu, Xiaoke Li

    Solar-driven interfacial evaporation is promising for freshwater production but constrained by solar intermittency. Herein, a 3D hierarchical phase-change composite evaporator (PPMF@OD) is constructed via a hydrogel-assisted in situ anchoring strategy for round-the-clock desalination. At the molecular scale, hydrogel polar functional groups elevate intermediate water proportions, drastically reducing the vaporization enthalpy to 1871 J·g-1. Macroscopically, an optimized 3D geometry synergizes with the embedded phase-change microcapsules to deliver exceptional spatiotemporal energy management. During illumination, endothermic microcapsule melting suppresses top-surface heat dissipation, synergizing with macroscopic sidewall environmental heat absorption to surpass theoretical evaporation limits. Conversely, in the dark, latent heat released by crystallization couples with continuous environmental energy harvesting to sustain steam generation. Benefiting from this synergy of macroscopic environmental heat harvesting and microscopic thermal energy storage and release, PPMF@OD achieves 4.89 kg·m-2·h-1 under 1 sun and 2.36 kg·m-2·h-1 in the dark. Moreover, outstanding long-term crystallization resistance can be achieved even in an extreme 20 wt.% high-salinity medium. Under realistic outdoor conditions, the system yields an outstanding daily water production of 27.37 kg·m-2. This establishes a scalable, multiphysics-coupled paradigm for all-weather desalination.

  • Isochoric measurement of the evaporation point of pure fluids in bulk and nanoporous media using differential scanning calorimetry

    by Xingdong Qiu, Sugata P. Tan, Morteza Dejam, Hertanto Adidharma

    As a continuation of recent series of work, a new approach applying an isochoric heating process using differential scanning calorimetry (DSC) is introduced to measure the evaporation point of pure fluids in both bulk phase and nanoporous media, as opposed to the previous approach of isochoric cooling to measure the condensation point [X. Qiu et al., Phys. Chem. Chem. Phys., 2018, 20, 26241–26248; X. Qiu et al., Phys. Chem. Chem. Phys., 2019, 21, 224–231]. Though these two approaches must arrive at the same phase-transition point for a specified density of bulk pure fluids, it is not necessarily true for confined fluids due to hysteresis in a temperature range sufficiently far below the bulk critical point. The isochoric heating process allows one to accurately measure the phase transition of non-volatile fluids that exist in liquid phase at relatively high temperatures. As the new approach operates without an inert gas, which substantially dissolves in the test sample at high pressures if the standard isobaric measurement ASTM E1782 is used, application to the high-pressure range is enabled with higher accuracy. This method can also be extended to confined systems, where the evaporation points of both bulk and confined fluids are successively measured in a single run of experiment. The results reveal that capillary evaporation, i.e., evaporation of fluids confined in nanoporous media, occurs at a higher temperature (isobarically), or at a lower pressure (isothermally), than that in bulk only after the liquid in bulk space is completely evaporated. The method introduced in this work paves a new way to study the condensation/evaporation hysteresis of confined fluids as well as the evaporation point of confined fluid mixtures.


  • Experimental Study on the Criticality of a Methane/Ethane Mixture Confined in Nanoporous Media

    by Xingdong Qiu, Sugata P. Tan, Morteza Dejam, Hertanto Adidharma

    For the first time, the critical region of a methane/ethane mixture confined in nanoporous media (SBA-15) is experimentally investigated using differential scanning calorimetry with an isochoric cooling procedure. The results reveal that the supercritical region of the confined fluid mixture exists at a lower pressure than its counterpart in the bulk space. The shift of the critical region is dependent on the pore size, which is similar to that of pure fluids [Tan et al., J. Phys. Chem. C,2019,123, 9824–9830]. Specifically, compared to that in bulk, the shift is greater for smaller pore size. The heat of capillary condensation of this mixture is also discussed. The findings in this work would shed some light on the understanding of confined phase behavior, especially criticality, in investigations toward more complex confined mixtures encountered in practical engineering application, for example, oil and gas recovery from unconventional reservoirs.


  • Simple and accurate isochoric differential scanning calorimetry measurements: phase transitions for pure fluids and mixtures in nanopores

    by Xingdong Qiu, Sugata P. Tan, Morteza Dejam, Hertanto Adidharma

    Various types of nanopores are encountered in many different engineering and science applications. Due to incomplete understanding of the phase behavior of fluids in nanosize confined space, the improvement of such applications has been largely based on experience and empirical approaches. Therefore, experimental studies on the phase behavior of confined fluids that are simple but accurate are still urgently needed. We recently developed a new isochoric procedure using a Differential Scanning Calorimeter (DSC) to measure the onset of vapor–liquid phase transitions, which has been successfully used in experiments measuring the vapor pressures of pure substances and the dew points of a bulk mixture in the absence of nanopores [Qiu et al., Phys. Chem. Chem. Phys., 2018, 20, 26241–26248]. It is the purpose of this work to extend the new method to confined fluids. To demonstrate the superior ability of the new method, we measure the capillary condensation of CO2 and the dew points of a binary methane/ethane gas mixture confined in SBA-15 with different pore diameters.


  • Novel isochoric measurement of the onset of vapor–liquid phase transition using differential scanning calorimetry

    by Xingdong Qiu, Sugata P. Tan, Morteza Dejam, Hertanto Adidharma

    A novel method for measuring the onset of vapor–liquid phase transition applying an isochoric procedure in a high-pressure micro differential scanning calorimeter is introduced for the first time. Isochoric dew-point measurement is used to measure vapor pressures of CO2 at different boiling temperatures and dew points of a methane/ethane gas mixture at different pressures or temperatures. The isochoric two-phase bubble-point measurement, similar to the isobaric method, is also demonstrated to measure vapor pressures of methanol at different boiling temperatures. All results are in agreement with the literature data. The isochoric method is found to be superior to the widely used isobaric method. It can be used to measure the onset of vapor–liquid phase transition for a wide range of substances and mixtures, including the ones for which the isobaric method is inapplicable, and it eliminates difficulties usually encountered in the isobaric method. The proposed method along with the findings of this study can pave the way for experimental measurements of phase equilibria in more complex systems.