LZLinhui Zhu

Linhui Zhu

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Linhui Zhu has a total of 17 co-authors. Here are the top co-authors by number of shared publications:

  • Yu Liu

    College of Chemical and Biological Engineering, Shandong University of Science and Technology, Qingdao, Shandong 266590, PR China

    5 shared publications
  • Yaoji Tang

    College of Chemical and Biological Engineering, Shandong University of Science and Technology, 266590, Qingdao, Shandong, China

    4 shared publications
  • Fangyuan Wang

    College of Chemical and Environmental Engineering, Shandong University of Science and Technology

    3 shared publications
  • Lili Zhang

    Qingdao F and C Testing and Analyzing Co., Ltd, 266041, Qingdao, Shandong, China

    3 shared publications
  • Bin Zhou

    College of Chemical and Environmental Engineering, Shandong University of Science and Technology

    2 shared publications
  • Chengdong Guan

    College of Chemical and Environmental Engineering, Shandong University of Science and Technology

    2 shared publications

Latest Publications

  • Efficient Dye Removal by SA-g-P(AA-co-NIPAM/BENT) Composite Hydrogel

    by Kyohairwe Angela Mwesigye, Heyong Mu, Linhui Zhu, Yaoji Tang

    The composite hydrogel sodium graft poly(acrylic acid-co-N-isopropylacrylamide)/bentonite (SA-g-P(AA-co-NIPAM/BENT) emerges as an effective adsorbent to remove methylene blue (MB) and methyl violet (MV) from aqueous solutions through adsorption. Compared with the sodium graft poly(acrylic acid-co-N-isopropylacrylamide) graft copolymer SA-g-P(AA-co-NIPAM), the growth rate in terms of adsorption capacities of MV and MB is 35.5% (from 310 to 420 mg/g) and 10.2% (from 293 to 323 mg/g), respectively, with an incorporation of 0.6 g of BENT. The adsorption of MB on SA-g-P(AA-co-NIPAM/BENT) is spontaneous while MV is nonspontaneous. In addition, adsorption of both dyes satisfies the Freundlich equation and the Pseudo second-order kinetic model.


  • Open Access

    Synthesis of chitosan graft poly (acrylic acid-co-2-acrylamide-2-methylpropanesulfonic acid)/graphite oxide composite hydrogel and the study of its adsorption

    by Linhui Zhu, Yu Liu, Yaoji Tang Yangwenyi L

    Chitosan graft poly (acrylic acid-co-2-acrylamide-2-methylpropanesulfonic acid)/graphite oxide (CTS-g-P(AA-co-AMPS)/GO) composite hydrogel is synthesized and used to remove rhodamine 6G (R6G) and methyl violet (MV) from aqueous solutions by adsorption. The composite is characterized by infrared spectroscopy (IR), powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The effect of the adsorption conditions, including the amount of graphite oxide (GO), the initial concentration of dye solutions, the adsorption time, ionic strength, and the mass of the composite, on the adsorption capacities has been studied in detail. It can be seen that small amount of GO can improve the adsorption capacities of both dyes. It is found that the adsorption capacities of R6G and MV can be increased by 57.26% and 26.39%, respectively, compared with CTS-g-P(AA-co-AMPS graft copolymer. The maximal adsorption capacity of R6G and MV is 625.3 and 326.4 mg/g, respectively. The interaction between GO and dye molecules are speculated. GO acts as crosslinking points and combine with the CTS-g-P(AA-co-AMPS) graft copolymer through hydrogen bonds and electrostatic actions. The adsorption isotherms and thermodynamics are discussed. The Gibbs free energy of R6G and MV is that △GR6GӨ = −2.478 KJ/mol and △GMVӨ = −2.577 KJ/mol and it indicates that the adsorption of R6G and MV on CTS-g-P(AA-co-AMPS)/GO is spontaneous and satisfied the Redlich-Peterson equation. Kinetic studies show that the adsorption is in accordance with the Lagergren pseudo first-order kinetic model.


  • Synthesis and Adsorption Behavior of Chitosan Graft Poly(acrylic acid)/Graphite Oxide/Attapulgite Composite Hydrogel

    by Yaoji Tang, Linhui Zhu, Yu Liu

    Chitosan graft poly(acrylic acid)/graphite oxide/attapulgite (CTS-g-PAA/GO/APT) composite hydrogel has been synthesized and used to remove rhodamine B (RB) and methyl orange (MO) from aqueous solutions through adsorption. The composite is characterized by infrared spectroscopy (IR), powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA). The influence of adsorption conditions, i.e., the content of graphite oxide (GO) and attapulgite (ATP), the initial concentration of dye solutions, the adsorption time, ionic strength, pH values and dosage of the composite, on the adsorption capacities has been studied in detail. It is found that small amount of GO and ATP can improve the adsorption capacities of dyes significantly. Adsorption capacities of RB and MO onto CTS-g-PAA graft copolymer are 36.7 and 56.4 mg/g, respectively, while those onto CTS-g-PAA/GO/APT (GO 0.02 g, APT 0.05 g) composite hydrogel are 92.6 and 186.5 mg/g, respectively. Adsorption isotherms and thermodynamics are discussed. It indicates that the adsorption of RB is in accordance with both the Langmuir and R-P isotherm equations. However, that of MO meets the R-P equation. The adsorption of RB is spontaneous, while that of MO is not. Kinetic studies show that the adsorption of both RB and MO is in accordance with the Lagergren pseudo first-order kinetic model.


  • Study on the Preparation and Adsorption Properties of Sodium Alginate Graft Polyacrylic Acid/Graphite Oxide Composite Hydrogel

    by Yu Liu, Lili Zhang, Yaoji Tang, Linhui Zhu

    Sodium alginate graft poly acrylic acid/graphite oxide (SA-g-PAA/GO) composite hydrogel is prepared using potassium persulfate (KPS) as an initiator and N,N '-methylenebisacrylamide (MBA) as a cross-linker by solution polymerization. The composite hydrogel has been characterized by means of infrared spectroscopy (IR), powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM) and thermogravimetric analysis (TGA). Adsorption behavior of acid fuchsin (AF) and sunset yellow (SY) onto the composite hydrogel is investigated in detail. Maximal adsorption amount of AF and SY is 86.9 and 77.5 mg/g (1.484 × 10–4 and 1.713 × 10–4 mol/g), respectively, under the condition that GO is 0.02 g, initial concentration of dye solutions is 1000 mg/L, mass of SA-g-PAA/GO is 0.2 g, adsorption time is 24 h, and the temperature is 25°C. The adsorption amount AF and SY is 28.9 and 28.5% higher than that on SA-g-PAA graft copolymer which is prepared without GO. GO serves as cross-linking agent during polymerization and the interaction between GO and SA-g-PAA is intermolecular hydrogen bonds. The adsorption of AF and SY conforms to the Redlich–Peterson equation and Langmuir equation, respectively. The kinetic models of both AF and SY conform to the quasi-second-order kinetic equation.


  • Synthesis and the Swelling Behavior of Sodium Alginate Graft Poly (Acrylic Acid-co-acrylamide)/Graphite Oxide Super Absorbent Composite

    by Linhui Zhu, Yu Liu, Bin Zhou, Hongduo Tang, Fangyuan Wang, Chengdong Guan

    — Sodium alginate graft poly(acrylic acid- co-acrylamide)/graphite oxide (P(AA- co-AM)/GO) super absorbent composite was prepared by solution intercalation copolymerization of acrylic acid...


  • Preparation and absorption properties of poly (acrylic acid‐co‐acrylamide)/graphite oxide superabsorbent composite

    by Linhui Zhu, Fangyuan Wang, Yu Liu, Hongduo Tang, Chengdong Guan

    Poly (acrylic acid‐co‐acrylamide)/graphite oxide (P (AA‐co‐AM)/GO) superabsorbent composite was prepared by solution intercalation polymerization of acrylic acid (AA), acrylamide (AM), and graphite oxide (GO). The composite was characterized by Fourier transform infrared spectroscopy, powder X‐ray diffraction, scanning electron microscopy, transmission electron microscope, thermogravimetric analysis , and differential scanning calorimetry. The effect of reaction conditions, including the mass ratio of monomers, dosages of cross‐linker, initiator, and GO as well as the neutralization degree of AA, on water and saline absorption was studied. Water retention properties of the composite were also discussed. It showed that interactions between GO and P (AA‐co‐AM) copolymer were the intermolecular hydrogen bonds. Thermal stabilities of the composite could be improved by the incorporation of GO. Besides, there was a remarkable improvement of absorption capacities owing to the incorporation of GO. Absorption capacities of water and 0.9% NaCl could be improved from 141.7 and 33.6 g/g, respectively, to 809.6 and 131.4 g/g, respectively, as the dosage of GO increased from 0 to 0.1 g. In addition, there was a remarkable improvement of water retention rates. Water retention rates of P(AA‐co‐AM)/GO and P(AA‐co‐AM) were 65.9% and 53.8%, respectively, after drying at 25°C for 8 hr.


  • Preparation and the swelling properties of sodium alginate graft poly (acrylic acid‐co‐2‐acrylamide‐2‐methyl propane sulfonic acid)/graphene oxide hydrogel composite

    by Linhui Zhu, Yangwenyi Liu, Fangyuan Wang, Tengteng He, Yaoji Tang, Jing Yang

    Sodium alginate graft poly (acrylic acid‐co‐2‐acrylamide‐2‐methyl propane sulfonic acid)/graphene oxide (SA‐g‐P(AA‐co‐AMPS)/GO) hydrogel composite is prepared. The composite is characterized by infrared (IR) spectroscopy, X‐ray diffraction (XRD), high‐resolution scanning electron microscope (HRSEM), and differential scanning calorimetry (DSC). The swelling properties of the composite are investigated. GO acts as part of the cross‐linking points, which improves the swelling property of the composite. Maximal amount of absorption capacity in water and 0.9% NaCl is 862.3 and 164.7 g/g, respectively, with a GO content of 5 wt% of total mass of monomers. However, the absorption of water and 0.9% NaCl is only 390.3 and 52.5 g/g, respectively, without the incorporation of GO. Water retention properties of the composite are also tested.


  • Sorption behavior of methylene blue and rhodamine B mixed dyes onto chitosan graft poly (acrylic acid‐co‐2‐acrylamide‐2‐methyl propane sulfonic acid) hydrogel

    by Yaoji Tang, Tengteng He, Yangwenyi Liu, Bin Zhou, Rui Yang, Linhui Zhu

    Chitosan graft poly(acrylic acid‐co‐2‐acrylamide‐2‐methyl propane sulfonic acid) (CTS‐g‐P(AA‐co‐AMPS)) hydrogel is prepared and used to remove methylene blue (MB) and rhodamine B (RB) mixed dyes from aqueous solutions. The effect of adsorption conditions, including the initial concentrations of dye solutions, contact time, initial pH values, ionic strength, and the adsorbent dosage, on the adsorption capacities is investigated. The maximal adsorption capacity for MB and RB is 936.0 and 556.9 mg/g, respectively. The adsorption isotherms of the mixed dyes are discussed using the extended Langmuir (EL) and the extended Freundlich (EF) isotherm equations. It indicates that the adsorption of both dyes is in good agreement with the extended Freundlich isotherm. Meanwhile, the adsorption processes of both dyes are spontaneous. Adsorption kinetics is in accordance with the pseudo‐second‐order kinetic equation. It is concluded that the available adsorption sites are shared by both kinds of the dye molecules. The difference of the maximal adsorption capacities of the two dyes is due to their different affinity to the adsorbent.


  • Synthesis of Organo-Montmorillonite/Sodium Alginate Graft Poly(Acrylic Acid -Co-2-Acrylamido-2-Methyl-1-Propane Sulfonic Acid) Superabsorbent Composite and Its Adsorption Studies

    by Linhui Zhu, Lili Zhang, Yaoji Tang

    A new superabsorbent composite based on the natural material sodium alginate (SA) was synthesized by intercalation graft polymerization of SA, acrylic acid (AA), 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS) and organo-montmorillonite (OMMT) using ammonium persulfate (APS) as an initiator and N,N'-methylenebisacrylamide (MBA) as a cross linker. The composite was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and thermogravimetric analysis (TGA), and was used to remove heavy metal ions such as Pb2+, Ni2+ and Cu2+ from aqueous solutions. Maximum adsorption capacities for Pb2+, Ni2+ and Cu2+ were 1485, 303 and 294 mg/g respectively. It was found that the adsorption of Pb2+ was consistent with both the Langmuir and the Freundlich model, while that of Ni2+ and Cu2+ was in accordance with the Langmuir model. Mechanisms for the adsorption process were speculated upon. It revealed that chelation was dominant for the adsorption of Pb2+, while ion-exchange played an important role for adsorption of Ni2+ and Cu2+. The superabsorbent composite had good reuse performance in wastewater treatment.


  • Synthesis of kaolin/sodium alginate-grafted poly(acrylic acid-co-2-acrylamido-2-methyl-1-propane sulfonic acid) hydrogel composite and its sorption of lead, cadmium, and zinc ions

    by Linhui Zhu, Lili Zhang, Yaoji Tang, Dong Ma, Jing Yang

    A new composite, kaolin/sodium alginate-grafted poly(acrylic acid- co-2-acrylamido-2-methyl-1-propane sulfonic acid) (KL/SA- g-P(AA- co-AMPS)), was synthesized by intercalation graft polymerization of KL, SA, partially neutralized AA, and AMPS, using ammonium persulfate as an initiator and N, N′-methylenebisacrylamide as a cross-linker. The composite was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis. Possible mechanisms for the process of intercalation graft polymerization were speculated. The composite was used for the removal of heavy metal ions from aqueous solutions. Sorption behavior of heavy metal ions such as lead (Pb2+), cadmium (Cd2+), and zinc (Zn2+) on (KL/SA- g-P(AA- co-AMPS) was investigated. Maximal adsorption capacities for Pb2+, Cd2+, and Zn2+ ions were 834.7, 69.9, and 139.8 mg g−1, respectively. It was found that the adsorption of Pb2+ and Zn2+ ions was in agreement with the Freundlich model, whereas that of Cd2+ ion was consistent with both Langmuir and Freundlich models. Mechanisms for the adsorption process were also discussed. It indicated that chelation played an important role for the adsorption of Pb2+ ions, while ion exchange was decisive for the adsorption of Zn2+ and Cd2+ ions. It has been concluded that KL/SA- g-P(AA- co-AMPS) hydrogel composite offered excellent potential for the removal of heavy metal ions from contaminated water. In addition, the hydrogel composite could be regenerated and reused in wastewater treatment.