Ralf Fluckiger
Ralf Fluckiger has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
- Diego Marti
Diramics AG, Steinhausen, Switzerland
3 shared publications - Akshay Mahadev Arabhavi
Millimeter-Wave Electronics Group (MWE), ETH Zrich, Zrich, Switzerland
2 shared publications - Colombo R. Bolognesi
Millimeter-Wave Electronics Group (MWE), ETH Zrich, Zrich, Switzerland
2 shared publications - Filippo Ciabattini
Millimeter-Wave Electronics Group (MWE), ETH Zrich, Zrich, Switzerland
2 shared publications Olivier Ostinelli
Information Technology and Electrical Engineering (D-ITET) ETH Zrich, Zrich, Switzerland
2 shared publications- Rimjhim Chaudhary
Millimeter-Wave Electronics Group (MWE), ETH Zrich, Zrich, Switzerland
2 shared publications
Latest Publications
- Open Access
- 27 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 14 (3) , 336-345
A 16-GHz Bandwidth Cryogenic IF Amplifier With 4-K Noise Temperature for Sub-mm Radio-Astronomy Receivers
The major mm and sub-mm radio-astronomy observatories are prioritizing instantaneous bandwidth widening for their current or planned upgrades this decade. We present an ultra-wide-band and ultra-low-noise cryogenic hybrid amplifier with 4 K (NF = 0.06 dB) average noise temperature in the 2-18 GHz band when cooled to 6 K. It is based on a 100 nm gate pseudomorphic InP HEMT with outstanding characteristics. This demonstration amplifier meets the noise and IF bandwidth demands of ALMA next generation receivers, doubling the present maximum IF instantaneous bandwidth with state-of-the-art noise performance, with a gain flatness of ±0.8 dB, and output return loss better than 15 dB over 85% of the band. It can be used in the 1-19 GHz range with negligible degradation, and a tentative test has been performed with a 602-720 GHz ALMA band-9 DSB SIS mixer, showing a flat-average and low-ripple IF noise level in an 18-GHz wide band down to near DC. A balanced configuration is feasible to improve the input matching.
- 27 February 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Terahertz Science and Technology
- Vol. 14 (3) , 336-345
Open AccessA 16-GHz Bandwidth Cryogenic IF Amplifier With 4-K Noise Temperature for Sub-mm Radio-Astronomy Receivers
The major mm and sub-mm radio-astronomy observatories are prioritizing instantaneous bandwidth widening for their current or planned upgrades this decade. We present an ultra-wide-band and ultra-low-noise cryogenic hybrid amplifier with 4 K (NF = 0.06 dB) average noise temperature in the 2-18 GHz band when cooled to 6 K. It is based on a 100 nm gate pseudomorphic InP HEMT with outstanding characteristics. This demonstration amplifier meets the noise and IF bandwidth demands of ALMA next generation receivers, doubling the present maximum IF instantaneous bandwidth with state-of-the-art noise performance, with a gain flatness of ±0.8 dB, and output return loss better than 15 dB over 85% of the band. It can be used in the 1-19 GHz range with negligible degradation, and a tentative test has been performed with a 602-720 GHz ALMA band-9 DSB SIS mixer, showing a flat-average and low-ripple IF noise level in an 18-GHz wide band down to near DC. A balanced configuration is feasible to improve the input matching.
- Open Access
- 6 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (4) , 2122-2129
InP/GaAsSb Double Heterojunction Bipolar Transistor Emitter-Fin Technology With f MAX = 1.2 THz
We report a new InP/GaAsSb double heterojunction bipolar transistor (DHBT) emitter fin architecture with a record${f}_{\mathrm {MAX}} =1.2$ THz, a simultaneous${f}_{\mathrm {T}} =475$ GHz, and$BV_{\mathrm {CEO}} =5.4$ V. The resulting$BV_{\mathrm {CEO}}\,\times \,{f}_{\mathrm {MAX}} =6.48$ THz-V is unparalleled in semiconductor technology. Devices were realized with a 20-nm-thick compositionally and impurity graded GaAsSb-base and a 125-nm InP collector. The performance arises because the process allows: 1) a tunable base–emitter access distance down to 10 nm; 2) the use of thicker base contact metals; and 3) the minimization of parasitic capacitances and resistances via precise lateral wet etching of the base–collector (B/C) mesa. Perhaps more significantly, InP/GaAsSb DHBTs with${f}_{\mathrm {MAX}} \ge1$ THz are demonstrated with emitter lengths as long as 9.4$\mu \text{m}$ and areas as high as 1.645$\mu \text{m}$ 2 . Such an area is >$6\times $ larger than previously reported terahertz (THz) DHBTs, representing a breakthrough in THz transistor scalability. This attractive performance level is achieved with a very low dissipated power density which makes InP/GaAsSb DHBTs well-suited for high-efficiency millimeter- and submillimeter-wave applications. Furthermore, we provide the first large-signal characterization of a THz transistor with 94 GHz load-pull measurements showing a peak power-added-efficiency (PAE) of 32.5% (40% collector efficiency) and a maximum saturated power of 6.67 mW/$\mu \text{m}$ 2 or 1.17 mW/$\mu \text{m}$ of emitter length in a common-emitter configuration. Devices operate stably under large-signal conditions, with voltages nearly twice higher than those for peak small-signal performance.- 6 January 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 69 (4) , 2122-2129
Open AccessInP/GaAsSb Double Heterojunction Bipolar Transistor Emitter-Fin Technology With f MAX = 1.2 THz
We report a new InP/GaAsSb double heterojunction bipolar transistor (DHBT) emitter fin architecture with a record${f}_{\mathrm {MAX}} =1.2$ THz, a simultaneous${f}_{\mathrm {T}} =475$ GHz, and$BV_{\mathrm {CEO}} =5.4$ V. The resulting$BV_{\mathrm {CEO}}\,\times \,{f}_{\mathrm {MAX}} =6.48$ THz-V is unparalleled in semiconductor technology. Devices were realized with a 20-nm-thick compositionally and impurity graded GaAsSb-base and a 125-nm InP collector. The performance arises because the process allows: 1) a tunable base–emitter access distance down to 10 nm; 2) the use of thicker base contact metals; and 3) the minimization of parasitic capacitances and resistances via precise lateral wet etching of the base–collector (B/C) mesa. Perhaps more significantly, InP/GaAsSb DHBTs with${f}_{\mathrm {MAX}} \ge1$ THz are demonstrated with emitter lengths as long as 9.4$\mu \text{m}$ and areas as high as 1.645$\mu \text{m}$ 2 . Such an area is >$6\times $ larger than previously reported terahertz (THz) DHBTs, representing a breakthrough in THz transistor scalability. This attractive performance level is achieved with a very low dissipated power density which makes InP/GaAsSb DHBTs well-suited for high-efficiency millimeter- and submillimeter-wave applications. Furthermore, we provide the first large-signal characterization of a THz transistor with 94 GHz load-pull measurements showing a peak power-added-efficiency (PAE) of 32.5% (40% collector efficiency) and a maximum saturated power of 6.67 mW/$\mu \text{m}$ 2 or 1.17 mW/$\mu \text{m}$ of emitter length in a common-emitter configuration. Devices operate stably under large-signal conditions, with voltages nearly twice higher than those for peak small-signal performance. - Open Access
- 9 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 39 (7) , 2171-2176
Type-II GaInAsSb/InP Uniform Absorber High Speed Uni-Traveling Carrier Photodiodes
We report uniform Type-II GaInAsSb/InP UTC-PDs, and compare their performance to devices fabricated with GaAsSb uniform and graded (composition and doping) absorbers of the same thickness. The quaternary UTC-PDs show a transit limited bandwidth of 274 GHz in contrast to 107 and 185 GHz for uniform and graded GaAsSb absorber UTC-PDs. Because the uniform quaternary and ternary UTC-PDs only differ in their absorber material, the findings conclusively demonstrate enhanced transport in GaInAsSb. Performance comparison to GaInAs-based devices from the literature suggest that GaInAsSb is a superior absorber material for λ = 1.55 μm high-speed photodetectors. Additionally, the external responsivity of the GaInAsSb UTC-PDs (0.094 A/W) is ~34% higher than the GaAsSb PDs (0.070 A/W). This is the first demonstration of a quaternary GaInAsSb absorber in UTC-PDs.
- 9 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 39 (7) , 2171-2176
Open AccessType-II GaInAsSb/InP Uniform Absorber High Speed Uni-Traveling Carrier Photodiodes
We report uniform Type-II GaInAsSb/InP UTC-PDs, and compare their performance to devices fabricated with GaAsSb uniform and graded (composition and doping) absorbers of the same thickness. The quaternary UTC-PDs show a transit limited bandwidth of 274 GHz in contrast to 107 and 185 GHz for uniform and graded GaAsSb absorber UTC-PDs. Because the uniform quaternary and ternary UTC-PDs only differ in their absorber material, the findings conclusively demonstrate enhanced transport in GaInAsSb. Performance comparison to GaInAs-based devices from the literature suggest that GaInAsSb is a superior absorber material for λ = 1.55 μm high-speed photodetectors. Additionally, the external responsivity of the GaInAsSb UTC-PDs (0.094 A/W) is ~34% higher than the GaAsSb PDs (0.070 A/W). This is the first demonstration of a quaternary GaInAsSb absorber in UTC-PDs.