Yi Cheng
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yi Cheng has a total of 130 co-authors. Here are the top co-authors by number of shared publications:
- Shuangyin Wang
Hunan University
7 shared publications Chuan Zhao
5 shared publicationsFelix Kwofie
5 shared publicationsQuentin Meyer
5 shared publicationsYunjiao Li
5 shared publicationsZhenjiang He
5 shared publications
Latest Publications
- 26 August 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (35) , 37727-37737
Ir Single-Atom-Induced Localized Oxide Path Mechanism Enables Efficient and Stable Water Oxidation
Alkaline anion exchange membrane water electrolyzers (AEMWEs), which combine the high current density of proton-exchange membrane electrolyzers with the low cost of alkaline electrolyzers, have emerged as a premier technology for scalable green hydrogen production. Overcoming the sluggish kinetics of the oxygen evolution reaction is critical to enabling sustainable hydrogen production. Herein, we present iridium single-atom catalysts supported on nickel–iron borides (Ir-NiFeB), in which isolated Ir atoms with Ir–O–Ni/Fe coordination trigger direct O–O radical coupling at oxygen-bridged dual-metal centers, thereby inducing a mechanistic transition from the adsorption evolution mechanism (AEM) to the localized oxide path mechanism (OPM). The Ir-mediated electron injection optimizes the d-band center and the electronic structure, as corroborated by a significant reduction in the reaction energy barrier under the OPM. This mechanistic optimization endows Ir-NiFeB with an overpotential of 190 mV at 10 mA cm–2 under alkaline media. The AEMWE with Ir-NiFeB at the anode achieved a cell voltage of 1.7 V at 1 A cm–2 and maintained stable operation exceeding 500 h. Remarkably, considering electricity consumption alone, the AEMWE achieves energy efficiencies of 87% and 73% at 1 A cm–2, based on the higher and lower heating values of hydrogen, respectively, thereby potentially producing hydrogen at an energy consumption of 45.2 kWh kg–1 and a cost of $0.90 per kg. This work demonstrates that atomic-scale coordination engineering can activate the OPM, overcoming AEM limitations and offering a scalable strategy for practical, high-performance electrolysis with minimal noble metal loading.
- 26 August 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (35) , 37727-37737
Ir Single-Atom-Induced Localized Oxide Path Mechanism Enables Efficient and Stable Water Oxidation
Alkaline anion exchange membrane water electrolyzers (AEMWEs), which combine the high current density of proton-exchange membrane electrolyzers with the low cost of alkaline electrolyzers, have emerged as a premier technology for scalable green hydrogen production. Overcoming the sluggish kinetics of the oxygen evolution reaction is critical to enabling sustainable hydrogen production. Herein, we present iridium single-atom catalysts supported on nickel–iron borides (Ir-NiFeB), in which isolated Ir atoms with Ir–O–Ni/Fe coordination trigger direct O–O radical coupling at oxygen-bridged dual-metal centers, thereby inducing a mechanistic transition from the adsorption evolution mechanism (AEM) to the localized oxide path mechanism (OPM). The Ir-mediated electron injection optimizes the d-band center and the electronic structure, as corroborated by a significant reduction in the reaction energy barrier under the OPM. This mechanistic optimization endows Ir-NiFeB with an overpotential of 190 mV at 10 mA cm–2 under alkaline media. The AEMWE with Ir-NiFeB at the anode achieved a cell voltage of 1.7 V at 1 A cm–2 and maintained stable operation exceeding 500 h. Remarkably, considering electricity consumption alone, the AEMWE achieves energy efficiencies of 87% and 73% at 1 A cm–2, based on the higher and lower heating values of hydrogen, respectively, thereby potentially producing hydrogen at an energy consumption of 45.2 kWh kg–1 and a cost of $0.90 per kg. This work demonstrates that atomic-scale coordination engineering can activate the OPM, overcoming AEM limitations and offering a scalable strategy for practical, high-performance electrolysis with minimal noble metal loading.
- Open Access
- 1 August 2025
- Published by KEAI Publishing in Advanced Powder Materials
- Vol. 4 (4)
Rare earth-rich sublayer tuned Pd-skin for methanol and CO tolerance oxygen reduction and hydrogen oxidation reaction
- 1 August 2025
- Published by KEAI Publishing in Advanced Powder Materials
- Vol. 4 (4)
Open AccessRare earth-rich sublayer tuned Pd-skin for methanol and CO tolerance oxygen reduction and hydrogen oxidation reaction
- Open Access
- 30 June 2025
- Published by ARTS Publishing in Science and Technology Indonesia
- Vol. 10 (3) , 895-902
Core Shell Regulations in Co-Precipitation to Regulate Structure and Performance of Single-Crystal NCM622
The development of single-crystal NCM622 cathodes remains a key focus in lithium-ion battery research due to their stable structure and cycling performance. This study explores the impact of controlled gas environments on particle nucleation and growth, particularly under different nitrogen-to-air (N₂:air) ratios. The optimized condition, Hydroxide precursor (HP)-2.5 and Single crystal cathode (SC)-2.5 (N₂:air = 2.4:0.2 during nucleation up to 2.5 μm, followed by N₂:air = 2.4:0 for growth up to 5 μm), facilitates the formation of well-structured particles with a core-shell morphology. This structure enhances sintering efficiency, leading to the successful formation of single-crystal NCM622. Electrochemical evaluations reveal that SC-2.5 exhibits excellent cycling stability, with an initial discharge capacity of 168.48 mAh/g and a retention of 134.81 mAh/g after 100 cycles. The capacity retention of 86.32% and Coulombic efficiency of 99.32% indicate minimal degradation and strong electrochemical stability. These findings highlight the importance of controlled synthesis conditions in optimizing lithium-ion battery cathodes for high-performance energy storage applications.
- 30 June 2025
- Published by ARTS Publishing in Science and Technology Indonesia
- Vol. 10 (3) , 895-902
Open AccessCore Shell Regulations in Co-Precipitation to Regulate Structure and Performance of Single-Crystal NCM622
The development of single-crystal NCM622 cathodes remains a key focus in lithium-ion battery research due to their stable structure and cycling performance. This study explores the impact of controlled gas environments on particle nucleation and growth, particularly under different nitrogen-to-air (N₂:air) ratios. The optimized condition, Hydroxide precursor (HP)-2.5 and Single crystal cathode (SC)-2.5 (N₂:air = 2.4:0.2 during nucleation up to 2.5 μm, followed by N₂:air = 2.4:0 for growth up to 5 μm), facilitates the formation of well-structured particles with a core-shell morphology. This structure enhances sintering efficiency, leading to the successful formation of single-crystal NCM622. Electrochemical evaluations reveal that SC-2.5 exhibits excellent cycling stability, with an initial discharge capacity of 168.48 mAh/g and a retention of 134.81 mAh/g after 100 cycles. The capacity retention of 86.32% and Coulombic efficiency of 99.32% indicate minimal degradation and strong electrochemical stability. These findings highlight the importance of controlled synthesis conditions in optimizing lithium-ion battery cathodes for high-performance energy storage applications.
- Open Access
- 30 June 2025
- Published by ARTS Publishing in Science and Technology Indonesia
- Vol. 10 (3) , 895-902
Core Shell Regulations in Co-Precipitation to Regulate Structure and Performance of Single-Crystal NCM622
The development of single-crystal NCM622 cathodes remains a key focus in lithium-ion battery research due to their stable structure and cycling performance. This study explores the impact of controlled gas environments on particle nucleation and growth, particularly under different nitrogen-to-air (N₂:air) ratios. The optimized condition, Hydroxide precursor (HP)-2.5 and Single crystal cathode (SC)-2.5 (N₂:air = 2.4:0.2 during nucleation up to 2.5 μm, followed by N₂:air = 2.4:0 for growth up to 5 μm), facilitates the formation of well-structured particles with a core-shell morphology. This structure enhances sintering efficiency, leading to the successful formation of single-crystal NCM622. Electrochemical evaluations reveal that SC-2.5 exhibits excellent cycling stability, with an initial discharge capacity of 168.48 mAh/g and a retention of 134.81 mAh/g after 100 cycles. The capacity retention of 86.32% and Coulombic efficiency of 99.32% indicate minimal degradation and strong electrochemical stability. These findings highlight the importance of controlled synthesis conditions in optimizing lithium-ion battery cathodes for high-performance energy storage applications.
- 30 June 2025
- Published by ARTS Publishing in Science and Technology Indonesia
- Vol. 10 (3) , 895-902
Open AccessCore Shell Regulations in Co-Precipitation to Regulate Structure and Performance of Single-Crystal NCM622
The development of single-crystal NCM622 cathodes remains a key focus in lithium-ion battery research due to their stable structure and cycling performance. This study explores the impact of controlled gas environments on particle nucleation and growth, particularly under different nitrogen-to-air (N₂:air) ratios. The optimized condition, Hydroxide precursor (HP)-2.5 and Single crystal cathode (SC)-2.5 (N₂:air = 2.4:0.2 during nucleation up to 2.5 μm, followed by N₂:air = 2.4:0 for growth up to 5 μm), facilitates the formation of well-structured particles with a core-shell morphology. This structure enhances sintering efficiency, leading to the successful formation of single-crystal NCM622. Electrochemical evaluations reveal that SC-2.5 exhibits excellent cycling stability, with an initial discharge capacity of 168.48 mAh/g and a retention of 134.81 mAh/g after 100 cycles. The capacity retention of 86.32% and Coulombic efficiency of 99.32% indicate minimal degradation and strong electrochemical stability. These findings highlight the importance of controlled synthesis conditions in optimizing lithium-ion battery cathodes for high-performance energy storage applications.
- 18 June 2025
- Published by Elsevier in Journal of Environmental Sciences
- Vol. 163, 463-473
Transition metal-loaded granular activated carbon as efficient three-dimensional electrode for humic acid removal
- 18 June 2025
- Published by Elsevier in Journal of Environmental Sciences
- Vol. 163, 463-473
Transition metal-loaded granular activated carbon as efficient three-dimensional electrode for humic acid removal
- 19 May 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (21) , 19524-19551
Breaking the Activity and Stability Trade-Off of Platinum-Free Catalysts for the Oxygen Reduction Reaction in Hydrogen Fuel Cells
Hydrogen fuel cells, which use hydrogen as fuel to generate electricity, hold great promises as future energy conversion devices for heavy-duty transport, due to their zero CO2 emissions, high energy conversion efficiency, and high power density. However, the adoption of hydrogen fuel cells has been slow due to their reliance on large amounts of costly and scarce platinum (Pt) for the oxygen reduction reaction. The replacement of Pt with Earth-abundant transition metals such as Fe, Co, Mn, and Sn with oxygen reduction reaction affinity has thus been a holy grail of electrocatalysis research. Pt-free catalysts must combine both high power density and high stability in hydrogen fuel cells to be considered viable alternatives to Pt. Despite promising progress on both fronts, a trade-off has emerged: Pt-free catalysts either achieve high power densities (≥1.5 W cm-2) but suffer from low stabilities (≥70% loss after 25 h) or more recently demonstrate improved stability (≤25% loss after 150 h), while delivering considerably lower power densities (-2) in hydrogen fuel cells. Herein, we summarize the recent progress in the synthesis of high power density M-N-C catalysts for hydrogen fuel cells and highlight the critical importance of uncovering the underlying mechanisms using operando methods. We then discuss the primary causes of catalyst degradation in hydrogen fuel cells and the most promising strategies to enhance the stability of the M-N-C catalysts. Finally, a roadmap is proposed to overcome the activity stability trade-off for Pt-free catalysts in hydrogen fuel cells.
- 19 May 2025
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 19 (21) , 19524-19551
Breaking the Activity and Stability Trade-Off of Platinum-Free Catalysts for the Oxygen Reduction Reaction in Hydrogen Fuel Cells
Hydrogen fuel cells, which use hydrogen as fuel to generate electricity, hold great promises as future energy conversion devices for heavy-duty transport, due to their zero CO2 emissions, high energy conversion efficiency, and high power density. However, the adoption of hydrogen fuel cells has been slow due to their reliance on large amounts of costly and scarce platinum (Pt) for the oxygen reduction reaction. The replacement of Pt with Earth-abundant transition metals such as Fe, Co, Mn, and Sn with oxygen reduction reaction affinity has thus been a holy grail of electrocatalysis research. Pt-free catalysts must combine both high power density and high stability in hydrogen fuel cells to be considered viable alternatives to Pt. Despite promising progress on both fronts, a trade-off has emerged: Pt-free catalysts either achieve high power densities (≥1.5 W cm-2) but suffer from low stabilities (≥70% loss after 25 h) or more recently demonstrate improved stability (≤25% loss after 150 h), while delivering considerably lower power densities (-2) in hydrogen fuel cells. Herein, we summarize the recent progress in the synthesis of high power density M-N-C catalysts for hydrogen fuel cells and highlight the critical importance of uncovering the underlying mechanisms using operando methods. We then discuss the primary causes of catalyst degradation in hydrogen fuel cells and the most promising strategies to enhance the stability of the M-N-C catalysts. Finally, a roadmap is proposed to overcome the activity stability trade-off for Pt-free catalysts in hydrogen fuel cells.
- 16 February 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 109, 1126-1132
Insertion of rare earth ions into the ruthenium doped nickel iron layered double hydroxide for oxygen evolution reaction with low overpotential
- 16 February 2025
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 109, 1126-1132
Insertion of rare earth ions into the ruthenium doped nickel iron layered double hydroxide for oxygen evolution reaction with low overpotential
- 9 December 2024
- Published by Elsevier in Electrochimica Acta
- Vol. 512
Metallic ruthenium and ruthenium oxide heterojunctions boost acidic oxygen evolution reaction activity and durability
- 9 December 2024
- Published by Elsevier in Electrochimica Acta
- Vol. 512
Metallic ruthenium and ruthenium oxide heterojunctions boost acidic oxygen evolution reaction activity and durability
- 23 August 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (35) , 46401-46411
Modulating Grain Boundary Networks to Achieve Superior Chemomechanical Coupling Properties in Nickel-Rich Cathode Materials
To forge ahead with the next generation of power batteries boasting superior energy density, nickel-rich layered oxides are regarded as some of the most promising cathode materials. However, challenges such as microcracks, which are attributed to the elevated nickel content of the materials, have posed impediments to their further development and application. Consequently, this article focuses on the understanding of the materials in the deep delithiation state, dissecting their degradation mechanisms through a dual lens of electrochemical and mechanical properties. The comprehensive analysis reveals that microcracks within the particles exhibit a degree of reversibility. However, with repeated Li+ de-/intercalation, these microcracks progressively propagate and permeate the entire particle, ultimately leading to particle fragmentation. Therefore, this study employs Dy2O3 as an inducer to facilitate the growth of primary crystal grains, reducing the internal porosity of the particles. This effectively enhances the conductivity and lithium-ion diffusion kinetics in deep lithium-ion deintercalation states of nickel-rich cathode materials. The modified material exhibits significant suppression of microcrack formation and growth during cycling, leading to notable improvements in its chemical-mechanical properties. These degradation mechanisms and modification strategies of Ni-rich cathodes offer valuable insights into the development of Ni-rich cathode materials tailored for electric vehicles.
- 23 August 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (35) , 46401-46411
Modulating Grain Boundary Networks to Achieve Superior Chemomechanical Coupling Properties in Nickel-Rich Cathode Materials
To forge ahead with the next generation of power batteries boasting superior energy density, nickel-rich layered oxides are regarded as some of the most promising cathode materials. However, challenges such as microcracks, which are attributed to the elevated nickel content of the materials, have posed impediments to their further development and application. Consequently, this article focuses on the understanding of the materials in the deep delithiation state, dissecting their degradation mechanisms through a dual lens of electrochemical and mechanical properties. The comprehensive analysis reveals that microcracks within the particles exhibit a degree of reversibility. However, with repeated Li+ de-/intercalation, these microcracks progressively propagate and permeate the entire particle, ultimately leading to particle fragmentation. Therefore, this study employs Dy2O3 as an inducer to facilitate the growth of primary crystal grains, reducing the internal porosity of the particles. This effectively enhances the conductivity and lithium-ion diffusion kinetics in deep lithium-ion deintercalation states of nickel-rich cathode materials. The modified material exhibits significant suppression of microcrack formation and growth during cycling, leading to notable improvements in its chemical-mechanical properties. These degradation mechanisms and modification strategies of Ni-rich cathodes offer valuable insights into the development of Ni-rich cathode materials tailored for electric vehicles.