Olga Vladimirovna Zaitseva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Olga Vladimirovna Zaitseva has a total of 63 co-authors. Here are the top co-authors by number of shared publications:
- Evgeny Alekseevich Trofimov
Department of Materials Science, Physical and Chemical Properties of Materials, South Ural State University, Chelyabinsk 454080, Russia
7 shared publications - Alexey Valentinovich Trukhanov
Scientific-Practical Materials Research Centre NAS of Belarus, 19 P. Brovki Street, 220072 Minsk, Belarus
3 shared publications - Denis Alexandrovich Vinnik
Laboratory of Single Crystal Growth, South Ural State University, 454080 Chelyabinsk, Russia
3 shared publications Dmitry Mikhailov
3 shared publications- Mariappan Anandkumar
South Ural State University, Chelyabinsk, Russia
3 shared publications - Vladimir E. Zhivulin
South Ural State University (National Research University), Chelyabinsk, Russia
3 shared publications
Latest Publications
- Open Access
Sunlight-Assisted Photocatalytic Degradation of Rhodamine B Dye by High-Entropy Fluorite Oxide
In the present work, a six-cation high-entropy fluorite-type oxide photocatalyst composition (Ce1/6Gd1/6Pr1/6Sm1/6Y1/6Zr1/6)O2−δ (HEFO) was prepared with the concept of “high entropy” using a glycine-assisted solution combustion method. Several characterization techniques, such as X-ray diffraction (XRD), UV–visible spectroscopy, and field emission scanning electron microscopy (FESEM), were employed to evaluate the physicochemical properties. Structural analysis by XRD confirmed the formation of a single-phase cubic fluorite structure supported by the Rietveld refinement analysis. The photocatalytic application was systematically evaluated using the prepared HEFO for the degradation of Rhodamine B dye with the help of natural sunlight and H2O2. Several parameters such as photocatalyst dose, dye concentration, and pH were investigated, and the results revealed that 25 mg of photocatalyst, 20 ppm dye concentration, and pH 11 achieved 99.25% of Rhodamine B degradation. Similarly, radical-scavenger tests suggested the involvement of more than one reactive pathway. In addition, the photocatalyst demonstrated excellent reusability, retaining 74.46% degradation efficiency after five cycles (83.6% activity retention), with XRD confirming the preserved cubic fluorite structure. The photocatalytic investigations demonstrate high-entropy oxides to be highly efficient and sustainable photocatalysts for the degradation of Rhodamine B dye.
Open AccessSunlight-Assisted Photocatalytic Degradation of Rhodamine B Dye by High-Entropy Fluorite Oxide
In the present work, a six-cation high-entropy fluorite-type oxide photocatalyst composition (Ce1/6Gd1/6Pr1/6Sm1/6Y1/6Zr1/6)O2−δ (HEFO) was prepared with the concept of “high entropy” using a glycine-assisted solution combustion method. Several characterization techniques, such as X-ray diffraction (XRD), UV–visible spectroscopy, and field emission scanning electron microscopy (FESEM), were employed to evaluate the physicochemical properties. Structural analysis by XRD confirmed the formation of a single-phase cubic fluorite structure supported by the Rietveld refinement analysis. The photocatalytic application was systematically evaluated using the prepared HEFO for the degradation of Rhodamine B dye with the help of natural sunlight and H2O2. Several parameters such as photocatalyst dose, dye concentration, and pH were investigated, and the results revealed that 25 mg of photocatalyst, 20 ppm dye concentration, and pH 11 achieved 99.25% of Rhodamine B degradation. Similarly, radical-scavenger tests suggested the involvement of more than one reactive pathway. In addition, the photocatalyst demonstrated excellent reusability, retaining 74.46% degradation efficiency after five cycles (83.6% activity retention), with XRD confirming the preserved cubic fluorite structure. The photocatalytic investigations demonstrate high-entropy oxides to be highly efficient and sustainable photocatalysts for the degradation of Rhodamine B dye.
- 30 June 2025
- Published by Nosov Magnitogorsk State Technical University in Vestnik of Nosov Magnitogorsk State Technical University
- Vol. 23 (2)
Modeling of Phase Composition and Crystallization of M(Cr30W5C1.5) Alloys
The relevance of the work is due to the need to develop economically accessible materials that combine high wear resistance, thermal stability, and reliability to replace expensive cobalt-based alloys in the conditions of growing demands of modern industrial production. The objective of the work is a comprehensive thermodynamic modeling of the temperature dependence of phase composition, crystallization, and density changes of high-entropy alloys of the M(Cr30W5C1.5) system (M = Co, Fe, Ni, Al, Mn) to optimize their performance characteristics. The study of how the matrix M composition influences the formation of crystal structures (FCC/BCC), carbide formation (M7C3/M23C6), and density variations allowed us to identify key patterns of these processes. The methods used included the CALPHAD approach with the Thermo-Calc software package (version 2024a) and the TCHEA5 database, as well as non-equilibrium crystallization modeling of alloys using the Scheil method. The results showed that the matrix M composition determines the dominant crystal structure: BCC phases are stabilized in aluminum-containing systems, while multicomponent alloys based on Co, Ni, Mn, and Fe form an FCC matrix (except for systems where Fe is the basis of the matrix). Differences in carbide formation were revealed: M7C3 carbides predominate in the Co-based matrix, M23C6 predominates in most other systems, and coexistence of different carbides is observed in the MnCoNiFe(Cr30W5C1.5) and CoNiFe(Cr30W5C1.5) systems. Density modeling showed that aluminum-containing alloys have 20–25% lower density and an increased risk of defect formation during crystallization, whereas systems based on Co, Ni, and Fe are expected to exhibit fewer defects. The practical relevance of the work lies in identifying promising MnCoNiFe(Cr30W5C1.5) and CoNiFe(Cr30W5C1.5) systems, which combine a stable FCC matrix, controlled carbide formation capabilities, and moderate density changes during crystallization. This is relevant for creating new alloys that can be applied in aerospace, energy, and mechanical engineering industries.
- 30 June 2025
- Published by Nosov Magnitogorsk State Technical University in Vestnik of Nosov Magnitogorsk State Technical University
- Vol. 23 (2)
Modeling of Phase Composition and Crystallization of M(Cr30W5C1.5) Alloys
The relevance of the work is due to the need to develop economically accessible materials that combine high wear resistance, thermal stability, and reliability to replace expensive cobalt-based alloys in the conditions of growing demands of modern industrial production. The objective of the work is a comprehensive thermodynamic modeling of the temperature dependence of phase composition, crystallization, and density changes of high-entropy alloys of the M(Cr30W5C1.5) system (M = Co, Fe, Ni, Al, Mn) to optimize their performance characteristics. The study of how the matrix M composition influences the formation of crystal structures (FCC/BCC), carbide formation (M7C3/M23C6), and density variations allowed us to identify key patterns of these processes. The methods used included the CALPHAD approach with the Thermo-Calc software package (version 2024a) and the TCHEA5 database, as well as non-equilibrium crystallization modeling of alloys using the Scheil method. The results showed that the matrix M composition determines the dominant crystal structure: BCC phases are stabilized in aluminum-containing systems, while multicomponent alloys based on Co, Ni, Mn, and Fe form an FCC matrix (except for systems where Fe is the basis of the matrix). Differences in carbide formation were revealed: M7C3 carbides predominate in the Co-based matrix, M23C6 predominates in most other systems, and coexistence of different carbides is observed in the MnCoNiFe(Cr30W5C1.5) and CoNiFe(Cr30W5C1.5) systems. Density modeling showed that aluminum-containing alloys have 20–25% lower density and an increased risk of defect formation during crystallization, whereas systems based on Co, Ni, and Fe are expected to exhibit fewer defects. The practical relevance of the work lies in identifying promising MnCoNiFe(Cr30W5C1.5) and CoNiFe(Cr30W5C1.5) systems, which combine a stable FCC matrix, controlled carbide formation capabilities, and moderate density changes during crystallization. This is relevant for creating new alloys that can be applied in aerospace, energy, and mechanical engineering industries.
- 17 November 2024
- Published by Elsevier in Ceramics International
- Vol. 51 (3) , 2770-2778
Electrochemical detection of p-nitrophenol using glassy carbon electrode modified using high-entropy oxide nanoparticles
- 17 November 2024
- Published by Elsevier in Ceramics International
- Vol. 51 (3) , 2770-2778
Electrochemical detection of p-nitrophenol using glassy carbon electrode modified using high-entropy oxide nanoparticles
- 5 November 2024
- Published by Elsevier in Materials Letters
- Vol. 379
Synthesis and characterization of the RE2A2O7 oxides with an ultrahigh-entropy sublattice occupied by rare-earth elements
- 5 November 2024
- Published by Elsevier in Materials Letters
- Vol. 379
Synthesis and characterization of the RE2A2O7 oxides with an ultrahigh-entropy sublattice occupied by rare-earth elements
- 27 June 2023
- Published by ITMO University in Nanosystems: Physics, Chemistry, Mathematics
- Vol. 14 (3) , 354-362
Synthesis of PbFe2.4X2.4Y2.4Ga2.4In2.4O19 high-entropy oxides with the magnetoplumbite structure
- 27 June 2023
- Published by ITMO University in Nanosystems: Physics, Chemistry, Mathematics
- Vol. 14 (3) , 354-362
Synthesis of PbFe2.4X2.4Y2.4Ga2.4In2.4O19 high-entropy oxides with the magnetoplumbite structure
- 10 January 2023
- Published by Elsevier in Materials Letters
- Vol. 335
Unraveling new single phase high entropy stannide by experimental screening of the as-cast samples
- 10 January 2023
- Published by Elsevier in Materials Letters
- Vol. 335
Unraveling new single phase high entropy stannide by experimental screening of the as-cast samples
- Open Access
- 11 April 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (8) , 1306
Creation and Magnetic Study of Ferrites with Magnetoplumbite Structure Multisubstituted by Al3+, Cr3+, Ga3+, and In3+ Cations
Multisubstituted barium ferrites with a magnetoplumbite structure were obtained by the method of solid-phase reactions with ferritization and pre-firing. Three-charged, mainly diamagnetic cations Al3+, Cr3+, Ga3+, and In3+ were chosen as substituents for the Fe3+ iron cations, the proportion of which in solid solutions did not exceed 50%. The values of the configurational mixing entropy were calculated for all the compositions. A slight deviation of the chemical composition of the obtained solid solutions from the nominal value was established by the energy-dispersive X-ray spectroscopy method. The phase purity and values of the unit cell parameters were refined from X-ray scattering data using full-profile analysis in the Rietveld method. A non-monotonic behavior of the unit cell parameters as a function of the B-sub-lattice average ionic radius of the magnetoplumbite structure was found. A minimum unit cell volume of ~667.15 Å3 was found for the composition BaFe6.11Al1.56Cr2.17Ga2.16O19 with a B-sub-lattice average ionic radius of ~7.449 Å. The average crystallite size varied within 5.5–6.5 μm. The temperature and field dependencies of the magnetization have been measured. The values of the saturation magnetization, residual magnetization, hysteresis loop squareness, and coercivity at 50 K and 300 K were extracted from the experimental data. Using the Law of Approach to Saturation, the magnetic crystallographic anisotropy coefficient and anisotropy field were calculated. Multisubstitution leads to a significant decrease in such magnetic parameters as the magnetic ordering temperature and spontaneous magnetization at both temperatures. The maximum magnetic ordering temperature of ~297.7 K was found for the composition BaFe5.84Ga6.19O19 with a B-sub-lattice average ionic radius of ~7.586 Å in a field of 500 Oe. A maximum saturation magnetization of ~24.7 emu/g was found for the composition BaFe5.84Ga6.19O19 with a B-sub-lattice average ionic radius of ~7.586 Å at 50 K. A maximum hysteresis loop squareness of ~0.72 was found for the composition BaFe6.11Al1.56Cr2.17Ga2.16O19 with an average ionic radius of ~7.449 Å at 50 K. A maximum magnetic crystallographic anisotropy coefficient of ~2.09 × 105 Erg/g was found for the composition BaFe6.19Al1.25Cr1.57Ga1.74In1.26O19 with a B-sub-lattice average ionic radius of ~7.706 Å at 50 K. The frustrated magnetic state including the nano-sized clusters with an average diameter in the range of 50–200 nm was established from the results of measuring the ZFC and FC temperature magnetizations. The interpretation of the obtained experimental data is carried out taking into account the increased stability of high-entropy phases and regular changes in the intensity of the Fe3+(Al3+, Cr3+, Ga3+, In3+)–O2−–Fe3+(Al3+, Cr3+, Ga3+, In3+) indirect superexchange interactions as a result of magnetic dilution of the iron sub-lattice in the magnetoplumbite structure.
- 11 April 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (8) , 1306
Open AccessCreation and Magnetic Study of Ferrites with Magnetoplumbite Structure Multisubstituted by Al3+, Cr3+, Ga3+, and In3+ Cations
Multisubstituted barium ferrites with a magnetoplumbite structure were obtained by the method of solid-phase reactions with ferritization and pre-firing. Three-charged, mainly diamagnetic cations Al3+, Cr3+, Ga3+, and In3+ were chosen as substituents for the Fe3+ iron cations, the proportion of which in solid solutions did not exceed 50%. The values of the configurational mixing entropy were calculated for all the compositions. A slight deviation of the chemical composition of the obtained solid solutions from the nominal value was established by the energy-dispersive X-ray spectroscopy method. The phase purity and values of the unit cell parameters were refined from X-ray scattering data using full-profile analysis in the Rietveld method. A non-monotonic behavior of the unit cell parameters as a function of the B-sub-lattice average ionic radius of the magnetoplumbite structure was found. A minimum unit cell volume of ~667.15 Å3 was found for the composition BaFe6.11Al1.56Cr2.17Ga2.16O19 with a B-sub-lattice average ionic radius of ~7.449 Å. The average crystallite size varied within 5.5–6.5 μm. The temperature and field dependencies of the magnetization have been measured. The values of the saturation magnetization, residual magnetization, hysteresis loop squareness, and coercivity at 50 K and 300 K were extracted from the experimental data. Using the Law of Approach to Saturation, the magnetic crystallographic anisotropy coefficient and anisotropy field were calculated. Multisubstitution leads to a significant decrease in such magnetic parameters as the magnetic ordering temperature and spontaneous magnetization at both temperatures. The maximum magnetic ordering temperature of ~297.7 K was found for the composition BaFe5.84Ga6.19O19 with a B-sub-lattice average ionic radius of ~7.586 Å in a field of 500 Oe. A maximum saturation magnetization of ~24.7 emu/g was found for the composition BaFe5.84Ga6.19O19 with a B-sub-lattice average ionic radius of ~7.586 Å at 50 K. A maximum hysteresis loop squareness of ~0.72 was found for the composition BaFe6.11Al1.56Cr2.17Ga2.16O19 with an average ionic radius of ~7.449 Å at 50 K. A maximum magnetic crystallographic anisotropy coefficient of ~2.09 × 105 Erg/g was found for the composition BaFe6.19Al1.25Cr1.57Ga1.74In1.26O19 with a B-sub-lattice average ionic radius of ~7.706 Å at 50 K. The frustrated magnetic state including the nano-sized clusters with an average diameter in the range of 50–200 nm was established from the results of measuring the ZFC and FC temperature magnetizations. The interpretation of the obtained experimental data is carried out taking into account the increased stability of high-entropy phases and regular changes in the intensity of the Fe3+(Al3+, Cr3+, Ga3+, In3+)–O2−–Fe3+(Al3+, Cr3+, Ga3+, In3+) indirect superexchange interactions as a result of magnetic dilution of the iron sub-lattice in the magnetoplumbite structure.
- 1 April 2022
- Published by Elsevier in Ceramics International
- Vol. 48 (7) , 9239-9247
Impact of the A-site rare-earth ions (Ln3+ – Sm3+, Eu3+, Gd3+) on structure and electrical properties of the high entropy LnCr0.2Mn0.2Fe0.2Co0.2Ni0.2O3 perovskites
- 1 April 2022
- Published by Elsevier in Ceramics International
- Vol. 48 (7) , 9239-9247
Impact of the A-site rare-earth ions (Ln3+ – Sm3+, Eu3+, Gd3+) on structure and electrical properties of the high entropy LnCr0.2Mn0.2Fe0.2Co0.2Ni0.2O3 perovskites
- 1 June 2021
- Published by Elsevier in Ceramics International
- Vol. 47 (12) , 17684-17692
Correlation of the Fe content and entropy state in multiple substituted hexagonal ferrites with magnetoplumbite structure
- 1 June 2021
- Published by Elsevier in Ceramics International
- Vol. 47 (12) , 17684-17692
Correlation of the Fe content and entropy state in multiple substituted hexagonal ferrites with magnetoplumbite structure