Paola Picco
Research Subjects
Paola Picco has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Roberto Bozzano
National Research Council of Italy, via De Marini 6, 16149 Genoa, Italy
4 shared publications - Sara Pensieri
Institute for the Study of Anthropic Impact and Sustainability in the Marine Environment (IAS), Consiglio Nazionale delle Ricerche (CNR), Genoa, Italy
4 shared publications - Stefano Vignudelli
National Research Council of Italy - Institute of Biophysics, Pisa, Italy
3 shared publications - Andrea Bordone
Marine Environment Research Centre of S. Teresa, Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA), 19032 Lerici, Italy
2 shared publications - Giancarlo Raiteri
Marine Environment Research Centre of S. Teresa, ENEA (Italian National Agency for New Technologies, Energy and Sustainable Economic Development), 19032 Lerici, Italy
2 shared publications - Luca Repetti
Hydrographic Institute, 16135 Genoa, Italy
2 shared publications
Latest Publications
- Open Access
- 11 December 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (12) , 2281
Satellite Altimetry and Seasonal Circulation in the Ligurian Sea
Satellite altimetry observations are checked against in situ measurements to assess the capability of this remote sensing technique to describe the surface circulation in the Ligurian Sea. CTD profiles were collected during five oceanographic campaigns from 2017 and 2024 along the satellite track Jason 044, crossing the Ligurian Sea from the Corsica Channel to the coast close to Genoa. Eight months of ADCP surface currents from a fixed mooring were also used for the comparison with altimetric-derived geostrophic currents. Moreover, the possible contribution of ICESat-2 to oceanographic studies in the area is investigated. Altimetric measurements successfully reproduce the basic circulation features of the region and their seasonal variation and, despite the different nature of the used systems, can be well integrated with in situ observations. The results from the direct comparison with daily mean values of ADCP surface currents reported an RMSD of the same order as the standard deviation, which is consistent with similar investigations in other areas but evidences the need to define more appropriate metrics and methods.
- 11 December 2024
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 12 (12) , 2281
Open AccessSatellite Altimetry and Seasonal Circulation in the Ligurian Sea
Satellite altimetry observations are checked against in situ measurements to assess the capability of this remote sensing technique to describe the surface circulation in the Ligurian Sea. CTD profiles were collected during five oceanographic campaigns from 2017 and 2024 along the satellite track Jason 044, crossing the Ligurian Sea from the Corsica Channel to the coast close to Genoa. Eight months of ADCP surface currents from a fixed mooring were also used for the comparison with altimetric-derived geostrophic currents. Moreover, the possible contribution of ICESat-2 to oceanographic studies in the area is investigated. Altimetric measurements successfully reproduce the basic circulation features of the region and their seasonal variation and, despite the different nature of the used systems, can be well integrated with in situ observations. The results from the direct comparison with daily mean values of ADCP surface currents reported an RMSD of the same order as the standard deviation, which is consistent with similar investigations in other areas but evidences the need to define more appropriate metrics and methods.
- Open Access
- 24 December 2022
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (1) , 22
Marine GIS as a Tool to Support Backscatter Data Analysis for Zooplankton Investigations
Echo-sounders and Vessel-Mounted Acoustic Doppler Current Profilers (VM-ADCP) are widely operating onboard research vessels with the aim of providing real-time backscatter and ocean current profiles along the route, while the vessel is moving. Backscatter data are exploited to infer important information about zooplankton presence and distribution. Nevertheless, as these organisms daily vertically migrate even below the depth of the instrument range, the combination of space and time variability make their mapping from a moving vessel quite complex. The objective of this work is to describe a GIS application developed for the management and analysis of these data. The GIS capability as a tool to facilitate zooplankton investigations is assessed by means of a test-case in the area of the Ligurian Sea (Western Mediterranean) by using VM-ADCP backscatter data made available during oceanographic campaigns. The system, which includes a high-resolution bathymetry, environmental parameters, ephemeris, allows to select and visualize data sorted according to all the possible layer combinations. Moreover, different backscatter profiles, characterizing the identified migration phases can be enlightened by means of false color scale representation.
- 24 December 2022
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 11 (1) , 22
Open AccessMarine GIS as a Tool to Support Backscatter Data Analysis for Zooplankton Investigations
Echo-sounders and Vessel-Mounted Acoustic Doppler Current Profilers (VM-ADCP) are widely operating onboard research vessels with the aim of providing real-time backscatter and ocean current profiles along the route, while the vessel is moving. Backscatter data are exploited to infer important information about zooplankton presence and distribution. Nevertheless, as these organisms daily vertically migrate even below the depth of the instrument range, the combination of space and time variability make their mapping from a moving vessel quite complex. The objective of this work is to describe a GIS application developed for the management and analysis of these data. The GIS capability as a tool to facilitate zooplankton investigations is assessed by means of a test-case in the area of the Ligurian Sea (Western Mediterranean) by using VM-ADCP backscatter data made available during oceanographic campaigns. The system, which includes a high-resolution bathymetry, environmental parameters, ephemeris, allows to select and visualize data sorted according to all the possible layer combinations. Moreover, different backscatter profiles, characterizing the identified migration phases can be enlightened by means of false color scale representation.
- Open Access
- 26 April 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (5) , 466
Improved Current Estimates from Spar Buoy-Mounted ADCP Measurement Station: A Case Study in the Ligurian Sea
Current measurements in the open sea are generally acquired by Acoustic Doppler Current Profilers (ADCPs). In the case of ADCPs mounted on spar buoy, current profiles require to be post-processed, to properly take into account the buoy influence: in fact, ADCP compass may reflect alterations induced by the metal structure of the buoy and apparent currents can occur due to the large displacement of the platform. Uncertainty analysis is finally required to properly consider both these effects and to compute robust velocity estimates. A new methodology is tested for a measurement station in the Ligurian Sea, where an ADCP was mounted on the surface buoy of the W1-M3A (Western 1 Mediterranean Moored Multisensor Array) oceanographic observatory, facing upwards at the depth of about 40 m. Marine current numerical models and historical data in the area have been used as a basis for comparison to test the consistency of the proposed method. A very good agreement is obtained. Only minor discrepancies are reported (e.g., monthly averages from the reference model slightly underestimate the west-east current component along the entire profile), but, in general, the application of the proposed methodology ensures that the spar buoy-mounted ADCP system is able to provide reliable measurements for oceanographic studies and validation of 3D hydrodynamic models.
- 26 April 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (5) , 466
Open AccessImproved Current Estimates from Spar Buoy-Mounted ADCP Measurement Station: A Case Study in the Ligurian Sea
Current measurements in the open sea are generally acquired by Acoustic Doppler Current Profilers (ADCPs). In the case of ADCPs mounted on spar buoy, current profiles require to be post-processed, to properly take into account the buoy influence: in fact, ADCP compass may reflect alterations induced by the metal structure of the buoy and apparent currents can occur due to the large displacement of the platform. Uncertainty analysis is finally required to properly consider both these effects and to compute robust velocity estimates. A new methodology is tested for a measurement station in the Ligurian Sea, where an ADCP was mounted on the surface buoy of the W1-M3A (Western 1 Mediterranean Moored Multisensor Array) oceanographic observatory, facing upwards at the depth of about 40 m. Marine current numerical models and historical data in the area have been used as a basis for comparison to test the consistency of the proposed method. A very good agreement is obtained. Only minor discrepancies are reported (e.g., monthly averages from the reference model slightly underestimate the west-east current component along the entire profile), but, in general, the application of the proposed methodology ensures that the spar buoy-mounted ADCP system is able to provide reliable measurements for oceanographic studies and validation of 3D hydrodynamic models.
- Open Access
- 4 March 2021
- Published by Copernicus GmbH
Surface circulation in the Ligurian Sea: an assessment of satellite radar altimeter-derived geostrophic currents.
Recent improvements of satellite altimeter observations allow to approach investigations on the surface ocean circulation even in those regions where the slope associated to dynamic structures is reduced. The capability to detect the main dynamic features and their variability from satellite radar altimetry in the Ligurian Sea (Western Mediterranean) is here assessed.Altimeter data from X-TRACK products recently released are used for this study: the time series of satellite-based- currents along the track n.044, which crosses the Ligurian Sea from the Corsica Channel to the Ligurian coast, is analysed. The temporal sampling is about 10 days and the along-track resolution is 7 km. Geostrophic currents computed from satellite radar altimetry are checked for consistency against the dynamic topography obtained from concurrent CTD casts collected during recent oceanographic campaigns carried out by the Italian Hydrographic Institute along the track. A more detailed assessment of the computed current velocities is based on the analysis of long-term ADCP measurements from a fixed mooring deployed from 2004 to 2006 in the Central Ligurian Sea (43°47.77’ N; 9°02.85’ E) 40 nm from the coast, quite close to the altimeter track. An RD&I 300 kHz upward-looking ADCP sampled the upper layer at 8 m vertical resolution. Currents in the upper layer (0-100 m) are almost barotropic with the variability due to the wind confined to the upper few meters. In order to define an appropriate metrics to compare currents from different measuring systems, EOF analysis of ADCP profiles have proved to be a good tool to filter out the high frequency and wind driven currents, thus enhancing the contribution of the geostrophic component.
- 4 March 2021
- Published by Copernicus GmbH
Open AccessSurface circulation in the Ligurian Sea: an assessment of satellite radar altimeter-derived geostrophic currents.
Recent improvements of satellite altimeter observations allow to approach investigations on the surface ocean circulation even in those regions where the slope associated to dynamic structures is reduced. The capability to detect the main dynamic features and their variability from satellite radar altimetry in the Ligurian Sea (Western Mediterranean) is here assessed.Altimeter data from X-TRACK products recently released are used for this study: the time series of satellite-based- currents along the track n.044, which crosses the Ligurian Sea from the Corsica Channel to the Ligurian coast, is analysed. The temporal sampling is about 10 days and the along-track resolution is 7 km. Geostrophic currents computed from satellite radar altimetry are checked for consistency against the dynamic topography obtained from concurrent CTD casts collected during recent oceanographic campaigns carried out by the Italian Hydrographic Institute along the track. A more detailed assessment of the computed current velocities is based on the analysis of long-term ADCP measurements from a fixed mooring deployed from 2004 to 2006 in the Central Ligurian Sea (43°47.77’ N; 9°02.85’ E) 40 nm from the coast, quite close to the altimeter track. An RD&I 300 kHz upward-looking ADCP sampled the upper layer at 8 m vertical resolution. Currents in the upper layer (0-100 m) are almost barotropic with the variability due to the wind confined to the upper few meters. In order to define an appropriate metrics to compare currents from different measuring systems, EOF analysis of ADCP profiles have proved to be a good tool to filter out the high frequency and wind driven currents, thus enhancing the contribution of the geostrophic component.
- Open Access
- 30 October 2020
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 8 (11) , 862
A Comparison between Coastal Altimetry Data and Tidal Gauge Measurements in the Gulf of Genoa (NW Mediterranean Sea)
Satellite altimetry data from X-TRACK products were analyzed for an overall assessment of their capability to detect coastal sea level variability in the Ligurian Sea. Near-coastal altimetry data, collected from 2009 to 2016 along track n.044, were compared with simultaneous high frequency sampled data at the tidal station in Genoa (NW Mediterranean Sea). The two time series show a very good agreement: correlation between total sea level elevation from the altimeter and sea level variation from the tidal gauge is 0.92 and root mean square difference is 4.5 cm. Some relevant mismatches can be ascribed to the local high frequency coastal variability due to shelf and harbor oscillation detected at the tidal station, which might not be observed at the location of the altimetry points of measurement. The analysis evidences discrepancies (root mean square difference of 4.7 cm) between model results for open sea tides and harmonic analysis at the tidal station, mainly occurring at the annual and semiannual period. On the contrary, the important part of dynamic atmospheric correction due to the inverse barometer effect, well agrees with that computed at the tidal station.
- 30 October 2020
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 8 (11) , 862
Open AccessA Comparison between Coastal Altimetry Data and Tidal Gauge Measurements in the Gulf of Genoa (NW Mediterranean Sea)
Satellite altimetry data from X-TRACK products were analyzed for an overall assessment of their capability to detect coastal sea level variability in the Ligurian Sea. Near-coastal altimetry data, collected from 2009 to 2016 along track n.044, were compared with simultaneous high frequency sampled data at the tidal station in Genoa (NW Mediterranean Sea). The two time series show a very good agreement: correlation between total sea level elevation from the altimeter and sea level variation from the tidal gauge is 0.92 and root mean square difference is 4.5 cm. Some relevant mismatches can be ascribed to the local high frequency coastal variability due to shelf and harbor oscillation detected at the tidal station, which might not be observed at the location of the altimetry points of measurement. The analysis evidences discrepancies (root mean square difference of 4.7 cm) between model results for open sea tides and harmonic analysis at the tidal station, mainly occurring at the annual and semiannual period. On the contrary, the important part of dynamic atmospheric correction due to the inverse barometer effect, well agrees with that computed at the tidal station.
- Open Access
- 15 August 2019
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 7 (8) , 275
Detection and Characterization of Meteotsunamis in the Gulf of Genoa
A long-term time series of high-frequency sampled sea-level data collected in the port of Genoa were analyzed to detect the occurrence of meteotsunami events and to characterize them. Time-frequency analysis showed well-developed energy peaks on a 26–30 minute band, which are an almost permanent feature in the analyzed signal. The amplitude of these waves is generally few centimeters but, in some cases, they can reach values comparable or even greater than the local tidal elevation. In the perspective of sea-level rise, their assessment can be relevant for sound coastal work planning and port management. Events having the highest energy were selected for detailed analysis and the main features were identified and characterized by means of wavelet transform. The most important one occurred on 14 October 2016, when the oscillations, generated by an abrupt jump in the atmospheric pressure, achieved a maximum wave height of 50 cm and lasted for about three hours.
- 15 August 2019
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 7 (8) , 275
Open AccessDetection and Characterization of Meteotsunamis in the Gulf of Genoa
A long-term time series of high-frequency sampled sea-level data collected in the port of Genoa were analyzed to detect the occurrence of meteotsunami events and to characterize them. Time-frequency analysis showed well-developed energy peaks on a 26–30 minute band, which are an almost permanent feature in the analyzed signal. The amplitude of these waves is generally few centimeters but, in some cases, they can reach values comparable or even greater than the local tidal elevation. In the perspective of sea-level rise, their assessment can be relevant for sound coastal work planning and port management. Events having the highest energy were selected for detailed analysis and the main features were identified and characterized by means of wavelet transform. The most important one occurred on 14 October 2016, when the oscillations, generated by an abrupt jump in the atmospheric pressure, achieved a maximum wave height of 50 cm and lasted for about three hours.
- Open Access
Analysis of the Precipitation Regime over the Ligurian Sea
The regions surrounding the North West Mediterranean Sea are often sites of intense precipitation events, particularly during the autumn months. The many casualties and the high economic costs due to these events demand a continuous improvement in forecasting models in support of early warning systems. The main weather conditions that determine episodes of heavy rain over these regions are known, but the high number of processes and interactions taking place at different time and space scales makes it extremely difficult to increase the skill pertaining to their predictability. To deepen the knowledge of the phenomena, both numerical simulations and analysis of historical data sets are required. This paper presents the analysis of a five-year-long time series of rain data collected in the open Ligurian Sea from the fixed platform W1M3A and coastal stations. The analysis aims to characterize the main features of the precipitation over this area and its seasonal and annual variability. Furthermore, the work includes a description of the main atmospheric and oceanic surface parameters measured from the platform during some intense events that occurred in the period 2009–2013 and suggests to what extent offshore observations may contribute to improve the forecast of rainfall events.
Open AccessAnalysis of the Precipitation Regime over the Ligurian Sea
The regions surrounding the North West Mediterranean Sea are often sites of intense precipitation events, particularly during the autumn months. The many casualties and the high economic costs due to these events demand a continuous improvement in forecasting models in support of early warning systems. The main weather conditions that determine episodes of heavy rain over these regions are known, but the high number of processes and interactions taking place at different time and space scales makes it extremely difficult to increase the skill pertaining to their predictability. To deepen the knowledge of the phenomena, both numerical simulations and analysis of historical data sets are required. This paper presents the analysis of a five-year-long time series of rain data collected in the open Ligurian Sea from the fixed platform W1M3A and coastal stations. The analysis aims to characterize the main features of the precipitation over this area and its seasonal and annual variability. Furthermore, the work includes a description of the main atmospheric and oceanic surface parameters measured from the platform during some intense events that occurred in the period 2009–2013 and suggests to what extent offshore observations may contribute to improve the forecast of rainfall events.