Vincenzo Bagarello
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Vincenzo Bagarello has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Vito Ferro
Department of Agricultural, Food and Forest Sciences, University of Palermo, Viale delle Scienze, Building 4, 90128 Palermo, Italy
3 shared publications G. Giordano
Dipartimento di Ingegneria e Tecnologie Agro-Forestali, Università di Palermo, Viale delleScienze, 90128 Palermo, Italy
2 shared publicationsA Sgroi
Dipartimento di Ingegneria e Tecnologie Agro-Forestali, Università degli Studi, Viale delle Scienze, 90128 Palermo, Italy
1 shared publicationA. Sgroi
Dipartimento di Ingegneria e Tecnologie Agro‐Forestali, Facoltà di Agraria Università degli Studi Viale delle Scienze 90128 Palermo Italy
1 shared publicationD. Elrick
Dep. of Land Resource Science, Univ. of Guelph, Guelph, ON, Canada, N1G 2W1
1 shared publicationF. D’aSaro
Dipartimento di Ingegneria e Tecnologie Agro—Forestali, Università di Palermo, Viale delle Scienze, 90128, Palermo, Italy
1 shared publication
Latest Publications
- 11 December 2009
- Published by Wiley in Hydrological Processes
- Vol. 24 (6) , 789-797
Testing alternative erosivity indices to predict event soil loss from bare plots in Southern Italy
Methods for predicting unit plot soil loss for the ‘Sparacia’ Sicilian (Southern Italy) site were developed using 316 simultaneous measurements of runoff and soil loss from individual bare plots varying in length from 11 to 44 m. The event unit plot soil loss was directly proportional to an erosivity index equal to (QREI30)1·47, being QREI30 the runoff ratio (QR) times the single storm erosion index (EI30). The developed relationship represents a modified version of the USLE‐M, and therefore it was named USLE‐MM. By the USLE‐MM, a constant erodibility coefficient was deduced for plots of different lengths, suggesting that in this case the calculated erodibility factor is representative of an intrinsic soil property. Testing the USLE‐M and USLE‐MM schemes for other soils and developing simple procedures for estimating the plot runoff ratio has practical importance to develop a simple method to predict soil loss from bare plots at the erosive event temporal scale. Copyright © 2009 John Wiley & Sons, Ltd.
- 11 December 2009
- Published by Wiley in Hydrological Processes
- Vol. 24 (6) , 789-797
Testing alternative erosivity indices to predict event soil loss from bare plots in Southern Italy
Methods for predicting unit plot soil loss for the ‘Sparacia’ Sicilian (Southern Italy) site were developed using 316 simultaneous measurements of runoff and soil loss from individual bare plots varying in length from 11 to 44 m. The event unit plot soil loss was directly proportional to an erosivity index equal to (QREI30)1·47, being QREI30 the runoff ratio (QR) times the single storm erosion index (EI30). The developed relationship represents a modified version of the USLE‐M, and therefore it was named USLE‐MM. By the USLE‐MM, a constant erodibility coefficient was deduced for plots of different lengths, suggesting that in this case the calculated erodibility factor is representative of an intrinsic soil property. Testing the USLE‐M and USLE‐MM schemes for other soils and developing simple procedures for estimating the plot runoff ratio has practical importance to develop a simple method to predict soil loss from bare plots at the erosive event temporal scale. Copyright © 2009 John Wiley & Sons, Ltd.
- 1 July 2008
- Published by Wiley in Soil Science Society of America Journal
- Vol. 72 (4) , 1048-1057
Testing Soil Encasing Materials for Measuring Hydraulic Conductivity of a Sandy‐Loam Soil by the Cube Methods
The Cube Method (CM) and the Modified Cube Method (MCM) were developed for measuring vertical ( K v ) and horizontal ( K h ) saturated hydraulic conductivity of a single soil sample. By these methods, a cube of soil is carved out in situ and a suitable material is applied to enclose the cube in a tightly fitting casing before moving the sample to the laboratory. Problems may be associated with the use of gypsum, originally used to encase soil. The suitability of molten wax and expandable polyurethane foam to encase a soil cube was tested for a sandy‐loam soil. Wax‐treated samples yielded lower conductivity results than untreated samples by a maximum factor of 3.7. The observed discrepancies were attributed, at least in part, to soil pore obstruction phenomena caused by wax. Using foam to fill a gap 60% full and partially preventing leakage of expanded foam from the gap was found to be appropriate to reach the following objectives: (i) filling completely the gap after foam expansion, (ii) preventing flow at the boundary between the foam cast and a smooth surface, (iii) minimizing both dry and wet soil compaction phenomena during foam expansion, (iv) minimizing foam intrusion into exposed pores of 1.0 × 10 −3 to 3.0 × 10 −3 m (intrusion depth ≤ 2.0 × 10 −3 m), and (v) allowing removal of any intrusion by the detachment of the set foam from the treated surface. Applying foam to collect undisturbed soil samples yielded K v results (7.41 × 10 −5 – 1.67 × 10 −4 m s −1 ) falling in the range of a larger number of previously measured conductivities (2.06 × 10 −5 – 2.03 × 10 −4 m s −1 ), and it showed that K v was 2.3 times larger than K h In conclusion, using wax is not recommended to obtain fully representative soil samples. Foam was a promising encasing material for the investigated soil.
- 1 July 2008
- Published by Wiley in Soil Science Society of America Journal
- Vol. 72 (4) , 1048-1057
Testing Soil Encasing Materials for Measuring Hydraulic Conductivity of a Sandy‐Loam Soil by the Cube Methods
The Cube Method (CM) and the Modified Cube Method (MCM) were developed for measuring vertical ( K v ) and horizontal ( K h ) saturated hydraulic conductivity of a single soil sample. By these methods, a cube of soil is carved out in situ and a suitable material is applied to enclose the cube in a tightly fitting casing before moving the sample to the laboratory. Problems may be associated with the use of gypsum, originally used to encase soil. The suitability of molten wax and expandable polyurethane foam to encase a soil cube was tested for a sandy‐loam soil. Wax‐treated samples yielded lower conductivity results than untreated samples by a maximum factor of 3.7. The observed discrepancies were attributed, at least in part, to soil pore obstruction phenomena caused by wax. Using foam to fill a gap 60% full and partially preventing leakage of expanded foam from the gap was found to be appropriate to reach the following objectives: (i) filling completely the gap after foam expansion, (ii) preventing flow at the boundary between the foam cast and a smooth surface, (iii) minimizing both dry and wet soil compaction phenomena during foam expansion, (iv) minimizing foam intrusion into exposed pores of 1.0 × 10 −3 to 3.0 × 10 −3 m (intrusion depth ≤ 2.0 × 10 −3 m), and (v) allowing removal of any intrusion by the detachment of the set foam from the treated surface. Applying foam to collect undisturbed soil samples yielded K v results (7.41 × 10 −5 – 1.67 × 10 −4 m s −1 ) falling in the range of a larger number of previously measured conductivities (2.06 × 10 −5 – 2.03 × 10 −4 m s −1 ), and it showed that K v was 2.3 times larger than K h In conclusion, using wax is not recommended to obtain fully representative soil samples. Foam was a promising encasing material for the investigated soil.
- 30 August 2007
- Published by Wiley in Hydrological Processes
- Vol. 22 (5) , 586-595
Predicting unit plot soil loss in Sicily, south Italy
Predicting soil loss is necessary to establish soil conservation measures. Variability of soil and hydrological parameters complicates mathematical simulation of soil erosion processes. Methods for predicting unit plot soil loss in Sicily were developed by using 5 years of data from replicated plots. At first, the variability of the soil water content, runoff, and unit plot soil loss values collected at fixed dates or after an erosive event was investigated. The applicability of the Universal Soil Loss Equation (USLE) was then tested. Finally, a method to predict event soil loss was developed. Measurement variability decreased as the mean increased above a threshold value but it was low also for low values of the measured variable. The mean soil loss predicted by the USLE was lower than the measured value by 48%. The annual values of the soil erodibility factor varied by seven times whereas the mean monthly values varied between 1% and 244% of the mean annual value. The event unit plot soil loss was directly proportional to an erosivity index equal to $Q_{\rm R}R_{\rm e}^{1{\cdot}609}$ , being QRRe the runoff ratio times the single storm erosion index. It was concluded that a relatively low number of replicates of the variable of interest may be collected to estimate the mean for both high and particularly low values of the variable. The USLE with the mean annual soil erodibility factor may be applied to estimate the order of magnitude of the mean soil loss but it is not usable to estimate soil loss at shorter temporal scales. The relationship for estimating the event soil loss is a modified version of the USLE‐M, given that it includes an exponent for the QRRe term. Copyright © 2007 John Wiley & Sons, Ltd.- 30 August 2007
- Published by Wiley in Hydrological Processes
- Vol. 22 (5) , 586-595
Predicting unit plot soil loss in Sicily, south Italy
Predicting soil loss is necessary to establish soil conservation measures. Variability of soil and hydrological parameters complicates mathematical simulation of soil erosion processes. Methods for predicting unit plot soil loss in Sicily were developed by using 5 years of data from replicated plots. At first, the variability of the soil water content, runoff, and unit plot soil loss values collected at fixed dates or after an erosive event was investigated. The applicability of the Universal Soil Loss Equation (USLE) was then tested. Finally, a method to predict event soil loss was developed. Measurement variability decreased as the mean increased above a threshold value but it was low also for low values of the measured variable. The mean soil loss predicted by the USLE was lower than the measured value by 48%. The annual values of the soil erodibility factor varied by seven times whereas the mean monthly values varied between 1% and 244% of the mean annual value. The event unit plot soil loss was directly proportional to an erosivity index equal to $Q_{\rm R}R_{\rm e}^{1{\cdot}609}$ , being QRRe the runoff ratio times the single storm erosion index. It was concluded that a relatively low number of replicates of the variable of interest may be collected to estimate the mean for both high and particularly low values of the variable. The USLE with the mean annual soil erodibility factor may be applied to estimate the order of magnitude of the mean soil loss but it is not usable to estimate soil loss at shorter temporal scales. The relationship for estimating the event soil loss is a modified version of the USLE‐M, given that it includes an exponent for the QRRe term. Copyright © 2007 John Wiley & Sons, Ltd.- 18 May 2007
- Published by Wiley in Hydrological Processes
- Vol. 21 (21) , 2862-2871
Assessing changes in rainfall erosivity in Sicily during the twentieth century
Changes in rainfall erosivity are an expected consequence of climate change. Long‐term series of the single storm erosion index, EI, may be analysed to detect trends in rainfall erosivity. An indirect approach has to be applied for estimating EI, given that long series of rainfall intensities are seldom available. In this paper, a method for estimating EI from the corresponding rainfall amount, he, was developed for Sicily. This method was then applied at 17 Sicilian locations, representative of different climatic zones of the region, to generate a long series (i.e. from 1916 to 1999 in most cases) of EI values. Linear and step (step located at 1970) trends in annual and seasonal erosivity were detected by both classical approaches (Mann–Kendall test, Wilcoxon‐Mann‐Whitney rank‐sum test) and a new empirical approach (quantile approach, QA), based on the determination of the erosivity values corresponding to selected probability levels. A power relationship between EI and he with a space‐ and time‐variable scale factor and a time‐variable process parameter yielded the most accurate predictions of EI. However, a simpler model, using a time‐variable scale factor and a constant process parameter, yielded reasonably accurate EI estimates. Annual erosivity did not increase in Sicily during the twentieth century. At the most, it decreased at a few locations (three of the 17 considered locations). Significant trends were observed more frequently for winter erosivity (six locations) than for summer erosivity (two locations), suggesting that the erosive storms of winter determined the occasional occurrence of a negative trend in annual erosivity. In general, the QA compared reasonably well with more classical approaches. The QA appears promising since step trends for different return periods may be detected but efforts are needed to statistically formalize the proposed approach. Copyright © 2007 John Wiley & Sons, Ltd.
- 18 May 2007
- Published by Wiley in Hydrological Processes
- Vol. 21 (21) , 2862-2871
Assessing changes in rainfall erosivity in Sicily during the twentieth century
Changes in rainfall erosivity are an expected consequence of climate change. Long‐term series of the single storm erosion index, EI, may be analysed to detect trends in rainfall erosivity. An indirect approach has to be applied for estimating EI, given that long series of rainfall intensities are seldom available. In this paper, a method for estimating EI from the corresponding rainfall amount, he, was developed for Sicily. This method was then applied at 17 Sicilian locations, representative of different climatic zones of the region, to generate a long series (i.e. from 1916 to 1999 in most cases) of EI values. Linear and step (step located at 1970) trends in annual and seasonal erosivity were detected by both classical approaches (Mann–Kendall test, Wilcoxon‐Mann‐Whitney rank‐sum test) and a new empirical approach (quantile approach, QA), based on the determination of the erosivity values corresponding to selected probability levels. A power relationship between EI and he with a space‐ and time‐variable scale factor and a time‐variable process parameter yielded the most accurate predictions of EI. However, a simpler model, using a time‐variable scale factor and a constant process parameter, yielded reasonably accurate EI estimates. Annual erosivity did not increase in Sicily during the twentieth century. At the most, it decreased at a few locations (three of the 17 considered locations). Significant trends were observed more frequently for winter erosivity (six locations) than for summer erosivity (two locations), suggesting that the erosive storms of winter determined the occasional occurrence of a negative trend in annual erosivity. In general, the QA compared reasonably well with more classical approaches. The QA appears promising since step trends for different return periods may be detected but efforts are needed to statistically formalize the proposed approach. Copyright © 2007 John Wiley & Sons, Ltd.
- 1 January 2004
- Published by Wiley in Soil Science Society of America Journal
- Vol. 68 (1) , 66-73
A Simplified Falling-Head Technique for Rapid Determination of Field-Saturated Hydraulic Conductivity
- 1 January 2004
- Published by Wiley in Soil Science Society of America Journal
- Vol. 68 (1) , 66-73
A Simplified Falling-Head Technique for Rapid Determination of Field-Saturated Hydraulic Conductivity
- 10 November 2003
- Published by Wiley in Hydrological Processes
- Vol. 18 (1) , 141-157
Plot‐scale measurement of soil erosion at the experimental area of Sparacia (southern Italy)
Obtaining good quality soil loss data from plots requires knowledge of the factors that affect natural and measurement data variability and of the erosion processes that occur on plots of different sizes. Data variability was investigated in southern Italy by collecting runoff and soil loss from four universal soil‐loss equation (USLE) plots of 176 m2, 20 ‘large’ microplots (0·16 m2) and 40 ‘small’ microplots (0·04 m2). For the four most erosive events (event erosivity index, Re ≥ 139 MJ mm ha−1 h−1), mean soil loss from the USLE plots was significantly correlated with Re. Variability of soil loss measurements from microplots was five to ten times greater than that of runoff measurements. Doubling the linear size of the microplots reduced mean runoff and soil loss measurements by a factor of 2·6–2·8 and increased data variability. Using sieved soil instead of natural soil increased runoff and soil loss by a factor of 1·3–1·5. Interrill erosion was a minor part (0·1–7·1%) of rill plus interrill erosion. The developed analysis showed that the USLE scheme was usable to predict mean soil loss at plot scale in Mediterranean areas. A microplot of 0·04 m2 could be used in practice to obtain field measurements of interrill soil erodibility in areas having steep slopes. Copyright © 2003 John Wiley & Sons, Ltd.
- 10 November 2003
- Published by Wiley in Hydrological Processes
- Vol. 18 (1) , 141-157
Plot‐scale measurement of soil erosion at the experimental area of Sparacia (southern Italy)
Obtaining good quality soil loss data from plots requires knowledge of the factors that affect natural and measurement data variability and of the erosion processes that occur on plots of different sizes. Data variability was investigated in southern Italy by collecting runoff and soil loss from four universal soil‐loss equation (USLE) plots of 176 m2, 20 ‘large’ microplots (0·16 m2) and 40 ‘small’ microplots (0·04 m2). For the four most erosive events (event erosivity index, Re ≥ 139 MJ mm ha−1 h−1), mean soil loss from the USLE plots was significantly correlated with Re. Variability of soil loss measurements from microplots was five to ten times greater than that of runoff measurements. Doubling the linear size of the microplots reduced mean runoff and soil loss measurements by a factor of 2·6–2·8 and increased data variability. Using sieved soil instead of natural soil increased runoff and soil loss by a factor of 1·3–1·5. Interrill erosion was a minor part (0·1–7·1%) of rill plus interrill erosion. The developed analysis showed that the USLE scheme was usable to predict mean soil loss at plot scale in Mediterranean areas. A microplot of 0·04 m2 could be used in practice to obtain field measurements of interrill soil erodibility in areas having steep slopes. Copyright © 2003 John Wiley & Sons, Ltd.
- 1 July 2000
- Published by Wiley in Soil Science Society of America Journal
- Vol. 64 (4) , 1203-1210
Factors Affecting Measurement of the Near‐Saturated Soil Hydraulic Conductivity
Different techniques and different technique application procedures are available to determine soil hydraulic conductivity ( K ). The objective of this study was to determine the dependence of the K values on the selected technique and application procedure. Soil hydraulic conductivity was determined on a sandy loam soil in the near‐saturated zone by the pressure infiltrometer, the tension infiltrometer field techniques, and the inverse method applied to laboratory outflow multistep experiments. Other experiments included a study of ascending and descending pressure heads ( h ) on the K values measured by the tension infiltrometer technique, and the effect of contact material on ponded infiltration rates. Differences between ascending and descending K means and coefficients of variation were h ≤ −120 mm). Three successive ponding infiltration runs produced mean field‐saturated hydraulic conductivities decreasing from 42.7 to 81.8 mm h −1 to 12.9 to 20.6 mm h −1 , whether or not contact material was present on the infiltration surface. The mean values of K obtained by the selected three methods ranged between 47.1 to 71.9 mm h −1 at saturation and The K ( h ) relationships obtained by the pressure with tension infiltrometer and multistep techniques were essentially overlapping. The pressure infiltrometer produced K ( h ) relationships that were different from those determined by the two other techniques. In conclusion, ponded infiltration measurements were not usable for estimating unsaturated soil hydraulic conductivity, but contact material and ascending vs. descending direction had no substantial effect on infiltration rate.
- 1 July 2000
- Published by Wiley in Soil Science Society of America Journal
- Vol. 64 (4) , 1203-1210
Factors Affecting Measurement of the Near‐Saturated Soil Hydraulic Conductivity
Different techniques and different technique application procedures are available to determine soil hydraulic conductivity ( K ). The objective of this study was to determine the dependence of the K values on the selected technique and application procedure. Soil hydraulic conductivity was determined on a sandy loam soil in the near‐saturated zone by the pressure infiltrometer, the tension infiltrometer field techniques, and the inverse method applied to laboratory outflow multistep experiments. Other experiments included a study of ascending and descending pressure heads ( h ) on the K values measured by the tension infiltrometer technique, and the effect of contact material on ponded infiltration rates. Differences between ascending and descending K means and coefficients of variation were h ≤ −120 mm). Three successive ponding infiltration runs produced mean field‐saturated hydraulic conductivities decreasing from 42.7 to 81.8 mm h −1 to 12.9 to 20.6 mm h −1 , whether or not contact material was present on the infiltration surface. The mean values of K obtained by the selected three methods ranged between 47.1 to 71.9 mm h −1 at saturation and The K ( h ) relationships obtained by the pressure with tension infiltrometer and multistep techniques were essentially overlapping. The pressure infiltrometer produced K ( h ) relationships that were different from those determined by the two other techniques. In conclusion, ponded infiltration measurements were not usable for estimating unsaturated soil hydraulic conductivity, but contact material and ascending vs. descending direction had no substantial effect on infiltration rate.