MBManohar Reddy Busireddy

Manohar Reddy Busireddy

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Manohar Reddy Busireddy has a total of 60 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    2-(5,6-Difluoro-3-oxo-2,3-dihydro-1 H -inden-1-ylidene)-malononitrile and Naphtho[2,3- b ]thiophene Diimide End-Capped Porphyrin Derivatives as Panchromatic Light-Harvesting Absorbers and Non-Fullerene Acceptors in Organic Solar Cells

    by Manohar Reddy Busireddy, Yi-Chieh Chiu, Hung-Cheng Lin, Chain-Shu Hsu, Chia-Chih Chang

    Porphyrin-based nonfullerene acceptors (NFAs) are one of the most promising photoactive components in organic solar cells (OSCs) due to their excellent light-harvesting properties, featuring a high absorption coefficient of the Soret band in the ultraviolet–visible (UV–vis) region and an adjustable Q-band in the near-infrared (NIR) region, respectively. Moreover, the Acceptor−Donor−Acceptor (A–D–A) architecture is the most successful design strategy for constructing efficient NFAs. Herein, two porphyrin-based NFAs, named S-NPN-EH and T-NPN-OD, having naphtho[2,3-b]thiophene diimide (NTI) as the terminal acceptor units and porphyrin as a central core, are constructed with and without an acetylene linkage to elucidate the impact of linkage chemistry. For comparison, a 2-(5,6-difluoro-3-oxo-2,3-dihydro-1H-inden-1-ylidene) malononitrile (2FIC) end-capped porphyrin derivative, denoted as POR6−4FIC, with acetylene-bridged alkylthiophene as the π-spacers, is reported. The impact of the terminal NTI acceptor and acetylene linkage on structural, optoelectronic, and photovoltaic properties of S-NPN-EH and T-NPN-OD is systematically studied. The film-state UV–vis absorption of T-NPN-OD shows a more red-shifted spectrum with intensified Soret-/Q-bands in the NIR region over 1000 nm because acetylene bridges enhance intermolecular stacking and coplanarity compared to S-NPN-EH. In addition, T-NPN-OD exhibits a down-shifted lowest unoccupied molecular orbital (LUMO) energy level compared with S-NPN-EH, indicating that the S-NPN-EH-based device improves Voc values. As expected, the reference POR6−4FIC shows strong red-shifted absorption over 1000 nm in the NIR region and down-shifted LUMO energy levels because of the strong intermolecular interactions between the donor and acceptors. The optimized device based on PTB7-Th/S-NPN-EH blend delivers a higher PCE of 2.19%, whereas the optimized PBDB-T:T-NPN-OD-based device shows a lower PCE of 1.01%. The reference PTB7-Th/POR6−4FIC-based device delivers a poor PCE of 0.32%. These results indicate that fine-balanced blend film morphology, well-matched energy levels, and solubility are critical for enhancing device performance.

  • Open Access

    Achieving Low Dissipation Factors and Low Dielectric Constants via Thermally Stable Naphthalene-Based Poly(ester-imide)s with Fluorine Groups

    by Manohar Reddy Busireddy, Ling-Huan Meng, Jin-Wei Lin, Wei-Chung Ke, Jiun-Tai Chen, Chain-Shu Hsu

    In recent years, polyimides (PIs) and their functional derivatives (i.e., poly(ester-imide)s (PEIs), poly(amide-imide)s (PAIs), etc.) have gained more attention in the microelectronic and optoelectronic industries because of their excellent thermal-mechanical stabilities, heat resistance, dielectric properties, and solution processabilities. Nevertheless, developing PIs with low dielectric constants (Dk) and low dissipation factors (Df) at high frequencies (≥10 GHz) is crucial for advanced mobile communications and high-frequency applications. Therefore, to achieve low dielectric properties in both Dk and Df at high frequencies, using PEIs with strong electron-withdrawing fluorine groups is a good synthetic strategy. Herein, a series of PEIs with trifluoromethyl (-CF3) groups are prepared from 2,2'-bis(trifluoromethyl)-[1,1'-biphenyl]-4,4'-diamine (TFMB), 1,4-phenylene bis(1,3-dioxo-1,3-dihydroisobenzofuran-5-carboxylate) (TAHQ), and naphthalene-2,6-diyl bis(1,3-dioxo-1,3-dihydroisobenzofuran-5-carboxylate) (NPDA) monomers. In addition, the molar ratio of TAHQ/NPDA modulates the comprehensive performances of the derived PEI films, and each performance of the PEI films is addressed in detail. From the theoretical calculations, when increasing the NPDA ratio from 0 to 100% in the TFMB/TAHQ system, the molar free volume increases and balances the polarizability and linearity, which is beneficial for achieving low dielectric properties. As a result, all the PEI films exhibit excellent thermal stabilities with thermal decomposition temperature at 5% weight loss (Td5%) over 470 °C and glass transition temperature (Tg) at 215-250 °C. In addition, all the PEI films show decent coefficients of thermal expansion (CTE) in the range of 16-40 ppm/°C and good mechanical stabilities. Moreover, all PEI films exhibit low dielectric properties at high frequencies. When increasing the NPDA concentration from 0 to 100%, both Dk/Df values gradually decrease from 3.19/0.00322 for PEI-NPDA-0 to 2.90/0.00174 for PEI-NPDA-100 at a 10 GHz frequency. Particularly, the Df values are one of the lowest values under the 10 GHz frequency. The results demonstrate that preparing PEI backbones with fluorine groups is a good synthetic strategy for achieving low dielectric properties at higher frequencies.


  • Open Access

    Phenothiazine-Based Solid Additives for Optimizing Film Morphologies in High-Performance Organic Photovoltaics

    by Jin-Wei Lin, Manohar Reddy Busireddy, Jiun-Tai Chen, Keisuke Tajima, Chain-Shu Hsu


  • Open Access

    Recent Advances in Electrocatalytic Transesterification: Enhancing Biodiesel Synthesis for Sustainable Energy

    by Yen-Yi Lee, Chien-Hsing Wu, Masimukku Srinivaas, I-Cheng Li, Manohar Reddy Busireddy, Brindha Devi S., Ramyakrishna Pothu, Fatemah M. Barakat, Rajender Boddula, Samuel Lalthazuala Rokhum, et al.

    The depletion of fossil fuels and the escalating environmental degradation have intensified the global search for sustainable and renewable energy alternatives. Biodiesel, either used directly or blended with petrodiesel, presents a more environmentally favorable option for diesel engines, owing to its superior combustion efficiency, biodegradability, low sulfur content, high cetane number, and high flash point. However, traditional biodiesel production methods, such as acid‐catalyzed transesterification, which requires significant acid consumption, and supercritical transesterification, which operates at elevated temperatures, are limited by their complexity and high production costs. In contrast, electrocatalytic transesterification represents a promising and bio‐based approach for biodiesel synthesis. This method utilizes electrochemical mechanisms to drive the transesterification reaction under milder conditions, with or without the use of a catalyst, significantly enhancing reaction efficiency and selectivity. Electrocatalytic processes have demonstrated efficiency across various feedstocks, including palm oil, lemon seed oil, sunflower oil, corn oil, and alternative resources such as waste cooking oil (WCO), chicken fat, vegetable oil refinery waste, and algal oil, WCO, chitosan gel, plastic waste, and biomass‐derived biochar incorporated with metal or metal–oxide nanoparticles. This review critically explores the electrocatalytic synthesis of biodiesel from a range of raw materials, emphasizing its potential for advancing sustainable energy production. Furthermore, this approach not only offers a cleaner energy solution but also contributes to environmental protection by reducing greenhouse gas emissions. The review emphasizes the critical role of electrocatalytic transesterification in advancing the development of biodiesel as a sustainable and energy‐efficient alternative in addressing global energy challenges.


  • Open Access

    High Thermal and Low Dielectric Polyimides Based on Ether-Linked Xanthone-Based Diamines Having Bulky Trifluoromethyl Groups

    by Yueh-Hsing Lee, Ming-Feng Hsu, Guo-Quan Wu, Jin-Wei Lin, Manohar Reddy Busireddy, Jiun-Tai Chen, Chain-Shu Hsu


  • Phenoxy Group-Containing Asymmetric Non-Fullerene Acceptors Achieved Higher VOC over 1.0 V through Alkoxy Side-Chain Engineering for Organic Solar Cells

    by Chuan-Hsin Wang, Manohar Reddy Busireddy, Sheng-Ci Huang, Hebing Nie, Yu-Shuo Liu, Bing-Yong Lai, Ling-Huan Meng, Wei-Tsung Chuang, Markus C. Scharber, Jiun-Tai Chen, et al.

    Alkoxy side chain engineering on the β-position of the thienothiophene units of Y6 derivatives plays a vital role in improving photovoltaic performances with simultaneously increasing open-circuit voltage (Voc) and fill factor (FF). In this work, we prepared a series of asymmetric non-fullerene acceptors (NFAs) by introducing alkoxy side chains and phenoxy groups on the state-of-the-art Y6-derivative BTP-BO-4F. For the comparison, 2O-BO-4F with a symmetric alkoxy side chain on the outer thiophene units and BTP-PBO-4F with an asymmetric N-attached phenoxy alkyl chain on the pyrrole ring are synthesized from BTP-BO-4F. Thereafter, we construct four asymmetric NFAs by introducing different lengths of linear/branched alkoxy chains on the β-position of the thienothiophene units of BTP-PBO-4F. The resulting NFAs, named L10-PBO, L12-PBO, B12-PBO, and B16-PBO (L = linear and B = branched alkoxy side chains), are collectively called OR-PBO-series. Unexpectedly, all OR-PBO NFAs exhibit strong edge-on molecular packing and weaker π-π interactions in the film state, which diminish the charge transfer in organic solar cell (OSC) devices. As a consequence, the optimal devices of OR-PBO-based binary blends show poor photovoltaic performances [power conversion efficiency (PCE) = 6.52-9.62%] in comparison with 2O-BO-4F (PCE = 12.42%) and BTP-PBO-4F (PCE = 15.30%) reference blends. Nevertheless, the OR-PBO-based binary devices show a higher Voc and smaller Vloss. Especially, B12-PBO- and B16-PBO-based devices achieve Voc over 1.00 V, which is the highest value of Y-series OSC devices to the best of our knowledge. Therefore, by utilizing higher Voc of OR-PBO binary blends, B12-PBO and B16-PBO are incorporated into the PM6:BTP-PBO-4F-based binary blend and fabricated ternary devices. As a result, the PM6:BTP-PBO-4F:B12-PBO ternary device delivers the best PCE of 15.60% with an increasing Voc and FF concurrently.


  • High Thermally Stable Anthracene-Based Polyimides with Low Dielectric Constants and Dissipation Factors

    by Yueh-Hsing Lee, Jin-Wei Lin, Yu-Chen Huang, Yung-Jen Huang, Manohar Reddy Busireddy, Jiun-Tai Chen, Chain-Shu Hsu


  • Open Access

    Non‐fullerene all small molecule OBHJSCs with profound device characteristics

    by Manohar Reddy Busireddy, Ejjurothu Appalanaidu, Dyaga Bharath, Narendra Reddy Chereddy, Balaiah Shanigaram, Ganesh Datt Sharma, Jayathirtha Rao Vaidya

    In this work, we have reported two donor materials ONAF and SNAF that complement the widely used non‐fullerene acceptor ITIC, with the aim to develop non‐fullerene all small molecule organic bulk heterojunction solar cells (NF‐ASM‐OBHJSCs). Two small molecule donors A‐D‐D'‐D‐A architecture, namely ONAF and SNAF are synthesized and explored their ability to act as donor material along with the ITIC acceptor. Benzodithiophene (BDT) is used as central donor unit (dialkoxy‐BDT for ONAF and Dialkylthiophene‐BDT for SNAF) along with novel naphthodithiophene (NDT) terminal donor to improve light harvesting and charge conducting ability of the donor materials. N‐Butylrhodanine is employed as terminal acceptor to enhance the intramolecular charge transfer (ICT) and to place energy level of the donor materials. Both the small molecule donor materials have good thermal stability, broad and intense absorption displayed in the UV‐vis region with energy levels suitable for ITIC acceptor. NF‐ASM‐OBHJSCs are fabricated by using all small molecules (ONAF & SNAF) as donors and ITIC as acceptor. OBHJSCs based on SNAF displayed superior photovoltaic properties with power conversion efficiency (PCE) as 9.94 % (Jsc = 15.93 mA cm‐2, Voc = 0.96 V and FF = 0.65) compared to ONAF based devices with PCE as 7.48 % (Jsc = 14.93 mA cm‐2, Voc = 0.82 V and FF = 0.61). The substantial high PCE of SANF is attributed to the broad absorption, relatively well‐matched HOMO‐LUMO energy levels between SNAF – ITIC acceptor, better film morphology for efficient charge transport and exciton dissociation at donor/acceptor (D‐A) junction. The observed PCE is one of the best reported for the NDT‐BDT‐based all small molecule non‐fullerene OBHJSCs. Moreover, simplicity in the device fabrication procedures and low energy loss associated are added advantages with the SNAF based devices. We predict that the HOMO‐LUMO levels (CV) of D/A falling in this category, as in Figure S7, with further close energy levels will have implications on the efficiency of OBHJSCs.