Irina Aleksandrovna Astrakhantseva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Irina Aleksandrovna Astrakhantseva has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Roman Astrakhantsev
Ivanovo State Univ Chem Technol, Ivanovo, Russia
3 shared publications Arseny Viktorovich Mitin
2 shared publicationsIvanovo State University of Chemistry and Technology
2 shared publicationsRoman Astrakhantsev
National Research University Higher School of Economics, Myasnitskaya Str., 20, 101000, Moscow, Russia
2 shared publicationsRoman Gennadevich Astrakhantsev
2 shared publicationsA. O. Makshanova
Mendeleev Univ Chem Technol Russia, Moscow, Russia
1 shared publication
Latest Publications
- 10 December 2024
- Published by Ivanovo State University of Chemistry and Technology in ChemChemTech
- Vol. 68 (2) , 96-101
USING A DISCRETE PROBABILISTIC APPROACH FOR SIMULATING FLOW TUBULAR REACTORS
Tube-type devices, including chemical reactors, are often key components of the manufacturing process and significantly influence its technical and economic indicators. Therefore, creating new, higher-quality designs of such reactors and finding optimal operating regimes are important scientific research tasks. Addressing advanced problems always involves the use of mathematical and computer modeling techniques. Due to the complexity of internal processes in such equipment, relatively simplified standard models are used. The study examines the possibility of creating a model of a tubular reactor using systems of discrete stochastic elements. This tool fully utilizes the paradigm according to which the individual behavior of system elements should determine the behavior of the entire system as a whole. Additionally, the created models take into account the influence of probabilistic components of the phenomena under study. The article considers both hydrodynamic effects and the progression of chemical reactions within a unified approach. The methodology for creating the model is described, and some results of computer experiments with it are presented. The outcomes of simulation modeling using the proposed approach are analyzed, demonstrating its potential for generating new data in the field of digital technology development in industry. For citation: Bobkov S.P., Astrakhantseva I.A., Gushchin A.A., Bobkova E.S., Astrakhantsev R.G., Shutov D.A. Using a discrete probabilistic approach for simulating flow tubular reactors. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2025. V. 68. N 2. P. 96-101. DOI: 10.6060/ivkkt.20256802.7109.
- 10 December 2024
- Published by Ivanovo State University of Chemistry and Technology in ChemChemTech
- Vol. 68 (2) , 96-101
USING A DISCRETE PROBABILISTIC APPROACH FOR SIMULATING FLOW TUBULAR REACTORS
Tube-type devices, including chemical reactors, are often key components of the manufacturing process and significantly influence its technical and economic indicators. Therefore, creating new, higher-quality designs of such reactors and finding optimal operating regimes are important scientific research tasks. Addressing advanced problems always involves the use of mathematical and computer modeling techniques. Due to the complexity of internal processes in such equipment, relatively simplified standard models are used. The study examines the possibility of creating a model of a tubular reactor using systems of discrete stochastic elements. This tool fully utilizes the paradigm according to which the individual behavior of system elements should determine the behavior of the entire system as a whole. Additionally, the created models take into account the influence of probabilistic components of the phenomena under study. The article considers both hydrodynamic effects and the progression of chemical reactions within a unified approach. The methodology for creating the model is described, and some results of computer experiments with it are presented. The outcomes of simulation modeling using the proposed approach are analyzed, demonstrating its potential for generating new data in the field of digital technology development in industry. For citation: Bobkov S.P., Astrakhantseva I.A., Gushchin A.A., Bobkova E.S., Astrakhantsev R.G., Shutov D.A. Using a discrete probabilistic approach for simulating flow tubular reactors. ChemChemTech [Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol.]. 2025. V. 68. N 2. P. 96-101. DOI: 10.6060/ivkkt.20256802.7109.
- 16 November 2024
- Published by Infra-M Academic Publishing House in Modeling of systems and processes
- Vol. 17 (4) , 16-22
Simulation model of a flow tube reactor
Tubular reactors are the main type of equipment in many production processes. At the same time, their characteristics largely determine the production technical and economic indicators. Therefore, the design and development of more advanced reactor designs and the determination of effective operating parameters can be considered important research tasks. To solve them, it is necessary to use mathematical and computer modeling methods. However, models containing rather crude simplifying as-sumptions are used to analyze the processes occurring in the chemical environment. Therefore, such models can be considered insufficiently adequate. In addition, existing approaches to reactor modeling do not fully take into account the influence of stochastic factors on the process. This article describes a simulation approach to modeling an electrochemical ozone synthesis reactor. A discrete stochastic approach is used as a methodological basis. It is based on the study of the functioning of individual elements of the system, which, as a result, shape the behavior of the system as a whole. The approach takes into account the influence of both deter-ministic and random factors on the course of the process. The paper describes the algorithm of simulation computer modeling, provides the results of simulation modeling, as a sepa-rate stage of the synthesis, and the process as a whole. The results of comparing computer simulation data with experimental data conducted on a real laboratory installation are described. Conclusions are drawn about the adequacy of the proposed simulation model, about the possibilities of its application in research practice, and the merits and disadvantages of the de-scribed approach are noted
- 16 November 2024
- Published by Infra-M Academic Publishing House in Modeling of systems and processes
- Vol. 17 (4) , 16-22
Simulation model of a flow tube reactor
Tubular reactors are the main type of equipment in many production processes. At the same time, their characteristics largely determine the production technical and economic indicators. Therefore, the design and development of more advanced reactor designs and the determination of effective operating parameters can be considered important research tasks. To solve them, it is necessary to use mathematical and computer modeling methods. However, models containing rather crude simplifying as-sumptions are used to analyze the processes occurring in the chemical environment. Therefore, such models can be considered insufficiently adequate. In addition, existing approaches to reactor modeling do not fully take into account the influence of stochastic factors on the process. This article describes a simulation approach to modeling an electrochemical ozone synthesis reactor. A discrete stochastic approach is used as a methodological basis. It is based on the study of the functioning of individual elements of the system, which, as a result, shape the behavior of the system as a whole. The approach takes into account the influence of both deter-ministic and random factors on the course of the process. The paper describes the algorithm of simulation computer modeling, provides the results of simulation modeling, as a sepa-rate stage of the synthesis, and the process as a whole. The results of comparing computer simulation data with experimental data conducted on a real laboratory installation are described. Conclusions are drawn about the adequacy of the proposed simulation model, about the possibilities of its application in research practice, and the merits and disadvantages of the de-scribed approach are noted
- 14 June 2023
- Published by Infra-M Academic Publishing House in Modeling of systems and processes
- Vol. 16 (2) , 7-14
Flow hydrodynamics discrete stochastic model
For the mathematical description of hydrodynamic conditions in industrial equipment, idealized models are usually used. Upon receipt, a number of simplifying assumptions are made, which, on the one hand, facilitate the use, and on the other hand, the Appearance of the adequacy of the model. All typical models of flow structures are deterministic and continual. At the same time, it became known that the real situation arises in the process of considering possible factors. This trend leads to the need for a wider application of probabilistic approaches to modeling technological processes and apparatuses using modern digital technologies. This article cancels an attempt to create a hydrodynamic model using probabilistic cellular automata. In the model of occurrence, there is one reason for two flow velocities, a decision on the occurrence of a pressure drop, and the other is due to random walks of microvolumes of a moving medium. The described procedure for creating a model contains the results of its use. In particular, the results of modeling of motion trajectories in rare cases, the phenomena of their general movement and detection in rare zones were found. The article presents the results of a comparison of a discrete stochastic model with the types of a diffusion model, in terms of reflecting the physical essence of current flows, the possibilities of determining parameter models, and ease of use. The decisive aspects of the new model, its advantages and revolutions are shown. Possible areas of application of the obtained model. Under investigation are the results of simulation modeling using the proposed model, which reveal repeated results not only consistent with the classical approaches of hydrodynamics, but allow obtaining new data on the course of the processes under study.
- 14 June 2023
- Published by Infra-M Academic Publishing House in Modeling of systems and processes
- Vol. 16 (2) , 7-14
Flow hydrodynamics discrete stochastic model
For the mathematical description of hydrodynamic conditions in industrial equipment, idealized models are usually used. Upon receipt, a number of simplifying assumptions are made, which, on the one hand, facilitate the use, and on the other hand, the Appearance of the adequacy of the model. All typical models of flow structures are deterministic and continual. At the same time, it became known that the real situation arises in the process of considering possible factors. This trend leads to the need for a wider application of probabilistic approaches to modeling technological processes and apparatuses using modern digital technologies. This article cancels an attempt to create a hydrodynamic model using probabilistic cellular automata. In the model of occurrence, there is one reason for two flow velocities, a decision on the occurrence of a pressure drop, and the other is due to random walks of microvolumes of a moving medium. The described procedure for creating a model contains the results of its use. In particular, the results of modeling of motion trajectories in rare cases, the phenomena of their general movement and detection in rare zones were found. The article presents the results of a comparison of a discrete stochastic model with the types of a diffusion model, in terms of reflecting the physical essence of current flows, the possibilities of determining parameter models, and ease of use. The decisive aspects of the new model, its advantages and revolutions are shown. Possible areas of application of the obtained model. Under investigation are the results of simulation modeling using the proposed model, which reveal repeated results not only consistent with the classical approaches of hydrodynamics, but allow obtaining new data on the course of the processes under study.
- Open Access
- 30 April 2022
- Published by Ivanovo State Power University (ISPU) in Vestnik IGEU
- No. 2,p. 58-66
Application of agent-based approach for heat conduction processes simulation
- 30 April 2022
- Published by Ivanovo State Power University (ISPU) in Vestnik IGEU
- No. 2,p. 58-66
Open AccessApplication of agent-based approach for heat conduction processes simulation
- Open Access
Investigation of NH3 Desorption Kinetics on the LTA and SOD Zeolite Membranes
The acidity characteristics of zeolite are highly significant, and understanding the acidic properties is essential for developing new types of zeolite catalysts. Zeolite membranes were synthesized using metakaolin, sodium hydroxide, and alumina with a molar ratio of 6Al2Si2O7:12NaOH:2Al2O3 as the starting ingredients. X-ray diffraction, scanning electron microscopy, and infrared spectroscopy were used for this study. N2 adsorption measurements determined the surface areas of the SOD zeolite membrane (115 m2/g) and the LTA membrane (150 m2/g). The units of absorbed water vapor were 40 and 60 wt% for the SOD membrane and the LTA membrane, respectively. The strength and number of acid sites of the synthesized LTA and SOD zeolite membranes were determined by temperature-programmed desorption of ammonia. As a result, the value of the total acidity of the LTA zeolite membrane is in the range of 0.08 × 1019 units/m2 while that of the sodalite membrane is an order of magnitude lower and is 0.006 × 1019 units/m2. The apparent activation energy values for desorption of ammonia from LTA and SOD zeolite membranes were calculated using data on the kinetics of desorption of ammonia at different heating rates. It was found that at temperatures below 250 °C, the degree of conversion of the activation energy values is no more than 35 kJ/mol, which corresponds to the desorption of physically bound ammonia. An increase in the activation values up to 70 kJ/mol (for SOD) and up to 80 kJ/mol (for LTA) is associated with the desorption of chemically bound ammonia from the samples.
Open AccessInvestigation of NH3 Desorption Kinetics on the LTA and SOD Zeolite Membranes
The acidity characteristics of zeolite are highly significant, and understanding the acidic properties is essential for developing new types of zeolite catalysts. Zeolite membranes were synthesized using metakaolin, sodium hydroxide, and alumina with a molar ratio of 6Al2Si2O7:12NaOH:2Al2O3 as the starting ingredients. X-ray diffraction, scanning electron microscopy, and infrared spectroscopy were used for this study. N2 adsorption measurements determined the surface areas of the SOD zeolite membrane (115 m2/g) and the LTA membrane (150 m2/g). The units of absorbed water vapor were 40 and 60 wt% for the SOD membrane and the LTA membrane, respectively. The strength and number of acid sites of the synthesized LTA and SOD zeolite membranes were determined by temperature-programmed desorption of ammonia. As a result, the value of the total acidity of the LTA zeolite membrane is in the range of 0.08 × 1019 units/m2 while that of the sodalite membrane is an order of magnitude lower and is 0.006 × 1019 units/m2. The apparent activation energy values for desorption of ammonia from LTA and SOD zeolite membranes were calculated using data on the kinetics of desorption of ammonia at different heating rates. It was found that at temperatures below 250 °C, the degree of conversion of the activation energy values is no more than 35 kJ/mol, which corresponds to the desorption of physically bound ammonia. An increase in the activation values up to 70 kJ/mol (for SOD) and up to 80 kJ/mol (for LTA) is associated with the desorption of chemically bound ammonia from the samples.
- Open Access
Randomized C/C++ dynamic memory allocator
Dynamic memory management requires special attention in programming. It should be fast and secure at the same time. This paper proposes a new randomized dynamic memory management algorithm designed to meet these requirements. Randomization is a key feature intended to protect applications from "use-after-free" or similar attacks. At the same time, the state in the algorithm consists only of one pointer, so it does not consume extra memory for itself. However, our algorithm is not a universal solution. It does not solve the memory fragmentation problem and it needs further development and testing.
Open AccessRandomized C/C++ dynamic memory allocator
Dynamic memory management requires special attention in programming. It should be fast and secure at the same time. This paper proposes a new randomized dynamic memory management algorithm designed to meet these requirements. Randomization is a key feature intended to protect applications from "use-after-free" or similar attacks. At the same time, the state in the algorithm consists only of one pointer, so it does not consume extra memory for itself. However, our algorithm is not a universal solution. It does not solve the memory fragmentation problem and it needs further development and testing.
- Open Access
- 1 August 2021
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2001 (1)
The use of multi-agent systems for modeling technological processes
The article is devoted to the issues of using discrete simulation models for modeling some basic technological processes. In the scientific work, models in the form of multi-agent systems have been investigated, which allow us to consider a continuous environment as a set of interacting elements (agents), the behavior of which obeys local functions. The authors describe the basic techniques and general methodology for the development of deterministic agent-based models. The paper considers the use of multi-agent systems for modeling thermal conductivity, taking into account the nonlinearity of the process, in homogeneity of the material and the presence of volumetric heat sources of variable power in it. The obtained scientific results are in good agreement with the generally accepted classical approaches and do not contradict the provisions adopted in the theory of thermal phenomena.
- 1 August 2021
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2001 (1)
Open AccessThe use of multi-agent systems for modeling technological processes
The article is devoted to the issues of using discrete simulation models for modeling some basic technological processes. In the scientific work, models in the form of multi-agent systems have been investigated, which allow us to consider a continuous environment as a set of interacting elements (agents), the behavior of which obeys local functions. The authors describe the basic techniques and general methodology for the development of deterministic agent-based models. The paper considers the use of multi-agent systems for modeling thermal conductivity, taking into account the nonlinearity of the process, in homogeneity of the material and the presence of volumetric heat sources of variable power in it. The obtained scientific results are in good agreement with the generally accepted classical approaches and do not contradict the provisions adopted in the theory of thermal phenomena.
- Open Access
- 1 August 2021
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2001 (1)
Randomized C/C++ dynamic memory allocator
Dynamic memory management requires special attention in programming. It should be fast and secure at the same time. This paper proposes a new randomized dynamic memory management algorithm designed to meet these requirements. Randomization is a key feature intended to protect applications from “use-after-free” or similar attacks. At the same time, the state in the algorithm consists only of one pointer, so it does not consume extra memory for itself. However, our algorithm is not a universal solution. It does not solve the memory fragmentation problem and it needs further development and testing.
- 1 August 2021
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 2001 (1)
Open AccessRandomized C/C++ dynamic memory allocator
Dynamic memory management requires special attention in programming. It should be fast and secure at the same time. This paper proposes a new randomized dynamic memory management algorithm designed to meet these requirements. Randomization is a key feature intended to protect applications from “use-after-free” or similar attacks. At the same time, the state in the algorithm consists only of one pointer, so it does not consume extra memory for itself. However, our algorithm is not a universal solution. It does not solve the memory fragmentation problem and it needs further development and testing.
- Open Access
- 18 May 2021
- Published by EDP Sciences in SHS Web of Conferences
- Vol. 106, 02001
Cryptocurrency fraud schemes analysis
The article focuses on the relevance of establishing legal norms for virtual currency, which is currently working in the gray zone. The article substantiates why cryptocurrency was referred to other property in the framework of civil law. The author suggests a definition of cryptocurrency to introduce it into legislation. Attributes of cryptocurrency theft are considered. The most attention is given to fraud, in particular different types of cryptocurrency phishing, and possible ways of criminal prosecution for cryptocurrency theft.
- 18 May 2021
- Published by EDP Sciences in SHS Web of Conferences
- Vol. 106, 02001
Open AccessCryptocurrency fraud schemes analysis
The article focuses on the relevance of establishing legal norms for virtual currency, which is currently working in the gray zone. The article substantiates why cryptocurrency was referred to other property in the framework of civil law. The author suggests a definition of cryptocurrency to introduce it into legislation. Attributes of cryptocurrency theft are considered. The most attention is given to fraud, in particular different types of cryptocurrency phishing, and possible ways of criminal prosecution for cryptocurrency theft.