Sven Reitzig
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Sven Reitzig has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Lukas M. Eng
Institute of Applied Physics, TUD Dresden University of Technology, Dresden, Germany
4 shared publications - Michael Rüsing
Paderborn University
4 shared publications Lukas M. Eng
Institut für Angewandte Physik, Technische Universität Dresden, 01062 Dresden, Germany
3 shared publications- Andy Thomas
Leibniz Institute for Solid State and Materials Research
1 shared publication Benjamin Kirbus
Institut für Angewandte Physik, Technische Universität Dresden, Dresden, Germany
1 shared publication- Benjamin Kirbus
Leipzig Institute for Meteorology, Leipzig University, Leipzig, Germany
1 shared publication
Latest Publications
- 27 February 2023
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 7 (2) , 024420
Vibrational properties of and under uniaxial stressStructural strain severely impacts material properties, such as the linear and nonlinear optical response. Moreover, strain plays a key role, e.g., in the physics of ferroelectrics and, in particular, of their domain walls. -Raman spectroscopy is a well-suited technique for the investigation of such strain effects as it allows to measure the lattice dynamics locally. However, quantifying and reconstructing strain fields from Raman maps requires knowledge on the strain dependence of phonon frequencies. In this paper, we have analyzed both theoretically and experimentally the phonon frequencies in the widely used ferroelectrics lithium niobate and lithium tantalate as a function of uniaxial strain via density functional theory and -Raman spectroscopy. Overall, we find a good agreement between our ab initio models and the experimental data performed with a stress cell. The majority of phonons show an increase in frequency under compressive strain, whereas the opposite is observed for tensile strains. Moreover, for -type phonons, we observe the lifting of degeneracy already at moderate strain fields (i.e., at ) along the and directions. This paper, hence, allows for the systematic analysis of three-dimensional strains in modern-type bulk and thin-film devices assembled from lithium niobate and tantalate.- 27 February 2023
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 7 (2) , 024420
Vibrational properties of and under uniaxial stressStructural strain severely impacts material properties, such as the linear and nonlinear optical response. Moreover, strain plays a key role, e.g., in the physics of ferroelectrics and, in particular, of their domain walls. -Raman spectroscopy is a well-suited technique for the investigation of such strain effects as it allows to measure the lattice dynamics locally. However, quantifying and reconstructing strain fields from Raman maps requires knowledge on the strain dependence of phonon frequencies. In this paper, we have analyzed both theoretically and experimentally the phonon frequencies in the widely used ferroelectrics lithium niobate and lithium tantalate as a function of uniaxial strain via density functional theory and -Raman spectroscopy. Overall, we find a good agreement between our ab initio models and the experimental data performed with a stress cell. The majority of phonons show an increase in frequency under compressive strain, whereas the opposite is observed for tensile strains. Moreover, for -type phonons, we observe the lifting of degeneracy already at moderate strain fields (i.e., at ) along the and directions. This paper, hence, allows for the systematic analysis of three-dimensional strains in modern-type bulk and thin-film devices assembled from lithium niobate and tantalate.- 25 April 2022
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 6 (4) , 044411
Atomic layer deposition of yttrium iron garnet thin films
Magnetic nanostructures with nontrivial three-dimensional (3D) shapes enable complex magnetization configurations and a wide variety of new phenomena. To date predominantly magnetic metals have been considered for nontrivial 3D nanostructures, although the magnetic and electronic transport responses are intertwined in metals. Here we report the first successful fabrication of the magnetic insulator yttrium iron garnet via atomic layer deposition (ALD) and show that conformal coating of 3D objects is possible. We utilize a supercycle approach based on the combination of subnanometer thin layers of the binary systems and in the correct atomic ratio with a subsequent annealing step for the fabrication of ALD-YIG films on substrates. Our process is robust against typical growth-related deviations, ensuring a good reproducibility. The ALD-YIG thin films exhibit a high crystalline quality as well as magnetic properties comparable to samples obtained by other deposition techniques. We show that the ALD-YIG thin films are conformal. This enables the fabrication of 3D YIG nanostructures once appropriate nonmagnetic, 3D templates are developed. Such 3D YIG structures build the groundwork for the experimental investigation of curvature-induced changes on pure spin currents and magnon transport effects.- 25 April 2022
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 6 (4) , 044411
Atomic layer deposition of yttrium iron garnet thin films
Magnetic nanostructures with nontrivial three-dimensional (3D) shapes enable complex magnetization configurations and a wide variety of new phenomena. To date predominantly magnetic metals have been considered for nontrivial 3D nanostructures, although the magnetic and electronic transport responses are intertwined in metals. Here we report the first successful fabrication of the magnetic insulator yttrium iron garnet via atomic layer deposition (ALD) and show that conformal coating of 3D objects is possible. We utilize a supercycle approach based on the combination of subnanometer thin layers of the binary systems and in the correct atomic ratio with a subsequent annealing step for the fabrication of ALD-YIG films on substrates. Our process is robust against typical growth-related deviations, ensuring a good reproducibility. The ALD-YIG thin films exhibit a high crystalline quality as well as magnetic properties comparable to samples obtained by other deposition techniques. We show that the ALD-YIG thin films are conformal. This enables the fabrication of 3D YIG nanostructures once appropriate nonmagnetic, 3D templates are developed. Such 3D YIG structures build the groundwork for the experimental investigation of curvature-induced changes on pure spin currents and magnon transport effects.- Open Access
- 18 April 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 120 (16) , 162901
High-speed hyperspectral imaging of ferroelectric domain walls using broadband coherent anti-Stokes Raman scattering
Spontaneous Raman spectroscopy (SR) is a versatile method for analysis and visualization of ferroelectric crystal structures, including domain walls. Nevertheless, the necessary acquisition time makes SR impractical for in situ analysis and large scale imaging. In this work, we introduce broadband coherent anti-Stokes Raman spectroscopy (B-CARS) as a high-speed alternative to conventional Raman techniques and demonstrate its benefits for ferroelectric domain wall analysis. Using the example of poled lithium niobate, we compare the spectral output of both techniques in terms of domain wall signatures and imaging capabilities. We extract the Raman-like resonant part of the coherent anti-Stokes signal via a Kramers–Kronig-based phase retrieval algorithm and compare the raw and phase-retrieved signals to SR characteristics. Finally, we propose a mechanism for the observed domain wall signal strength that resembles a Čerenkov-like behavior, in close analogy to domain wall signatures obtained by second-harmonic generation imaging. We, thus, lay here the foundations for future investigations on other poled ferroelectric crystals using B-CARS.
- 18 April 2022
- Published by AIP Publishing in Applied Physics Letters
- Vol. 120 (16) , 162901
Open AccessHigh-speed hyperspectral imaging of ferroelectric domain walls using broadband coherent anti-Stokes Raman scattering
Spontaneous Raman spectroscopy (SR) is a versatile method for analysis and visualization of ferroelectric crystal structures, including domain walls. Nevertheless, the necessary acquisition time makes SR impractical for in situ analysis and large scale imaging. In this work, we introduce broadband coherent anti-Stokes Raman spectroscopy (B-CARS) as a high-speed alternative to conventional Raman techniques and demonstrate its benefits for ferroelectric domain wall analysis. Using the example of poled lithium niobate, we compare the spectral output of both techniques in terms of domain wall signatures and imaging capabilities. We extract the Raman-like resonant part of the coherent anti-Stokes signal via a Kramers–Kronig-based phase retrieval algorithm and compare the raw and phase-retrieved signals to SR characteristics. Finally, we propose a mechanism for the observed domain wall signal strength that resembles a Čerenkov-like behavior, in close analogy to domain wall signatures obtained by second-harmonic generation imaging. We, thus, lay here the foundations for future investigations on other poled ferroelectric crystals using B-CARS.
- 30 December 2021
- Published by American Physical Society (APS) in Physical Review B
- Vol. 104 (22) , 224308
Broadband coherent anti-Stokes Raman scattering for crystalline materials
Broadband coherent anti-Stokes Raman scattering (B-CARS) has emerged in recent years as a promising chemosensitive high-speed imaging technique. B-CARS allows for the detection of vibrational sample properties in analogy to spontaneous Raman spectroscopy, but also makes electronic sample environments accessible due to its resonant excitation mechanism. Nevertheless, this technique has only gained interest in the biomedical field so far, whereas CARS investigations on solid-state materials are rare and concentrate on layered, two-dimensional materials such as graphene and hexagonal boron nitride . In this work, we discuss the specific properties of this technique when applied to single-crystalline samples, with respect to signal generation, phase matching, and selection rules in the model systems lithium niobate and lithium tantalate. Via polarized B-CARS measurements and subsequent phase retrieval, we validate the predicted selection rules, unequivocally assign the phonons of the (TO), E(TO) and (LO) branches to the detected CARS peaks, and address differences in spontaneous Raman spectroscopy concerning peak frequencies and scattering efficiencies. We thus establish this technique for future investigations of solid-state materials, specifically in the field of ferroelectric single crystals.- 30 December 2021
- Published by American Physical Society (APS) in Physical Review B
- Vol. 104 (22) , 224308
Broadband coherent anti-Stokes Raman scattering for crystalline materials
Broadband coherent anti-Stokes Raman scattering (B-CARS) has emerged in recent years as a promising chemosensitive high-speed imaging technique. B-CARS allows for the detection of vibrational sample properties in analogy to spontaneous Raman spectroscopy, but also makes electronic sample environments accessible due to its resonant excitation mechanism. Nevertheless, this technique has only gained interest in the biomedical field so far, whereas CARS investigations on solid-state materials are rare and concentrate on layered, two-dimensional materials such as graphene and hexagonal boron nitride . In this work, we discuss the specific properties of this technique when applied to single-crystalline samples, with respect to signal generation, phase matching, and selection rules in the model systems lithium niobate and lithium tantalate. Via polarized B-CARS measurements and subsequent phase retrieval, we validate the predicted selection rules, unequivocally assign the phonons of the (TO), E(TO) and (LO) branches to the detected CARS peaks, and address differences in spontaneous Raman spectroscopy concerning peak frequencies and scattering efficiencies. We thus establish this technique for future investigations of solid-state materials, specifically in the field of ferroelectric single crystals.- Open Access
“Seeing Is Believing”—In-Depth Analysis by Co-Imaging of Periodically-Poled X-Cut Lithium Niobate Thin Films
Nonlinear and quantum optical devices based on periodically-poled thin film lithium niobate (PP-TFLN) have gained considerable interest lately, due to their significantly improved performance as compared to their bulk counterparts. Nevertheless, performance parameters such as conversion efficiency, minimum pump power, and spectral bandwidth strongly depend on the quality of the domain structure in these PP-TFLN samples, e.g., their homogeneity and duty cycle, as well as on the overlap and penetration depth of domains with the waveguide mode. Hence, in order to propose improved fabrication protocols, a profound quality control of domain structures is needed that allows quantifying and thoroughly analyzing these parameters. In this paper, we propose to combine a set of nanometer-to-micrometer-scale imaging techniques, i.e., piezoresponse force microscopy (PFM), second-harmonic generation (SHG), and Raman spectroscopy (RS), to access the relevant and crucial sample properties through cross-correlating these methods. Based on our findings, we designate SHG to be the best-suited standard imaging technique for this purpose, in particular when investigating the domain poling process in x-cut TFLNs. While PFM is excellently recommended for near-surface high-resolution imaging, RS provides thorough insights into stress and/or defect distributions, as associated with these domain structures. In this context, our work here indicates unexpectedly large signs for internal fields occurring in x-cut PP-TFLNs that are substantially larger as compared to previous observations in bulk LN.
Open Access“Seeing Is Believing”—In-Depth Analysis by Co-Imaging of Periodically-Poled X-Cut Lithium Niobate Thin Films
Nonlinear and quantum optical devices based on periodically-poled thin film lithium niobate (PP-TFLN) have gained considerable interest lately, due to their significantly improved performance as compared to their bulk counterparts. Nevertheless, performance parameters such as conversion efficiency, minimum pump power, and spectral bandwidth strongly depend on the quality of the domain structure in these PP-TFLN samples, e.g., their homogeneity and duty cycle, as well as on the overlap and penetration depth of domains with the waveguide mode. Hence, in order to propose improved fabrication protocols, a profound quality control of domain structures is needed that allows quantifying and thoroughly analyzing these parameters. In this paper, we propose to combine a set of nanometer-to-micrometer-scale imaging techniques, i.e., piezoresponse force microscopy (PFM), second-harmonic generation (SHG), and Raman spectroscopy (RS), to access the relevant and crucial sample properties through cross-correlating these methods. Based on our findings, we designate SHG to be the best-suited standard imaging technique for this purpose, in particular when investigating the domain poling process in x-cut TFLNs. While PFM is excellently recommended for near-surface high-resolution imaging, RS provides thorough insights into stress and/or defect distributions, as associated with these domain structures. In this context, our work here indicates unexpectedly large signs for internal fields occurring in x-cut PP-TFLNs that are substantially larger as compared to previous observations in bulk LN.
- 1 January 2021
- Published by Optica Publishing Group
- p. NTh3A.7
CARS Domain-Wall Analysis in single-crystalline Lithium Niobate
We apply coherent anti-Stokes Raman scattering (CARS) for high-speed imaging of domain walls in lithium niobate. The domain wall signature provides similar spectral features as in spontaneous Raman spectroscopy, however at drastically increased scan speeds.
- 1 January 2021
- Published by Optica Publishing Group
- p. NTh3A.7
CARS Domain-Wall Analysis in single-crystalline Lithium Niobate
We apply coherent anti-Stokes Raman scattering (CARS) for high-speed imaging of domain walls in lithium niobate. The domain wall signature provides similar spectral features as in spontaneous Raman spectroscopy, however at drastically increased scan speeds.
- 1 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
$\mu$-Raman Investigations of Periodically-Poled X-Cut Thin-Film Lithium Niobate for Integrated Optics
In this study, Raman micro-spectroscopy is utilized as an imaging technique for the analysis of periodically-poled x-cut thin-film lithium niobate (TFLN) samples. These materials are very promising candidates for high performance integrated nonlinear and quantum optical applications. Analyzing the different peak intensities and frequency shifts of the lithium niobate (LN) phonon modes by $\mu$ -Raman spectroscopy ( $\mu \text{RS}$ ) allows to map and visualize the domain polarity and domain wall (DW) contrasts with high precision. Notably, these signatures are similar to the ones found for bulk LN, but exhibit larger frequency shifts in TFLN, which hints towards larger strain fields and built-in electric fields in these samples. $\mu \text{RS}$ thus not only serves as a powerful imaging technique, but equally provides in-situ analytical fingerprints in order to both differentiate domains from DWs, and to provide a structure-sensitive mimic for optimizing TFLN poling processes.- 1 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
$\mu$-Raman Investigations of Periodically-Poled X-Cut Thin-Film Lithium Niobate for Integrated Optics
In this study, Raman micro-spectroscopy is utilized as an imaging technique for the analysis of periodically-poled x-cut thin-film lithium niobate (TFLN) samples. These materials are very promising candidates for high performance integrated nonlinear and quantum optical applications. Analyzing the different peak intensities and frequency shifts of the lithium niobate (LN) phonon modes by $\mu$ -Raman spectroscopy ( $\mu \text{RS}$ ) allows to map and visualize the domain polarity and domain wall (DW) contrasts with high precision. Notably, these signatures are similar to the ones found for bulk LN, but exhibit larger frequency shifts in TFLN, which hints towards larger strain fields and built-in electric fields in these samples. $\mu \text{RS}$ thus not only serves as a powerful imaging technique, but equally provides in-situ analytical fingerprints in order to both differentiate domains from DWs, and to provide a structure-sensitive mimic for optimizing TFLN poling processes.