Takumi Sato
Takumi Sato has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Noriyoshi Arai
Keio University
4 shared publications - Yusei Kobayashi
Kyoto Institute of Technology
2 shared publications - Eiji Yamamoto
Keio University
1 shared publication Hiroaki Tsujinoue
Keio University
1 shared publication- Hiroyasu Sakata
Department of Architecture and Building Engineering, Tokyo Institute of Technology, Tokyo, Japan
1 shared publication - Kazuaki Z. Takahashi
National Institute of Advanced Industrial Science and Technology
1 shared publication
Latest Publications
- 13 July 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 130 (29) , 7415-7423
Analysis of Molecular Dynamics Simulation Data via Statistical Distances between Covariance Matrices
Molecular dynamics (MD) simulations are powerful tools for elucidating the macroscopic physical properties of materials from microscopic atomic behaviors. However, the massive, high-dimensional data sets generated by MD simulations pose a significant challenge for analysis, necessitating efficient dimensionality reduction and feature extraction techniques. While existing methods such as principal component analysis and unsupervised learning have been utilized, issues regarding data efficiency and computational cost remain. In this study, we propose a statistical analysis framework focusing on the analysis of the particle data distributions through their covariance matrices, corresponding to the second-order moments of MD trajectory data. Discrepancies between system states are quantified using statistical distances between these covariance matrices. By applying dimensionality reduction to the resulting distance matrix, we extract lower-dimensional features that characterize the systems' dynamics. We validate the proposed method using Lennard-Jones (LJ) particle systems under different temperature conditions, as well as separate bulk systems of ice and liquid water. The results of LJ particles demonstrate an approximately linear correlation between the first principal component obtained through dimensionality reduction of the distance matrix and the diffusion coefficient. This suggests that global physical properties can be effectively inferred from local statistical information, such as covariance matrices, offering a data-efficient alternative for analyzing complex molecular systems. Furthermore, in the case of separate bulk systems of ice and liquid water, the method successfully distinguishes between the two phases, highlighting its potential for characterizing phase transitions and structural differences in molecular systems.
- 13 July 2026
- Published by American Chemical Society (ACS) in The Journal of Physical Chemistry B
- Vol. 130 (29) , 7415-7423
Analysis of Molecular Dynamics Simulation Data via Statistical Distances between Covariance Matrices
Molecular dynamics (MD) simulations are powerful tools for elucidating the macroscopic physical properties of materials from microscopic atomic behaviors. However, the massive, high-dimensional data sets generated by MD simulations pose a significant challenge for analysis, necessitating efficient dimensionality reduction and feature extraction techniques. While existing methods such as principal component analysis and unsupervised learning have been utilized, issues regarding data efficiency and computational cost remain. In this study, we propose a statistical analysis framework focusing on the analysis of the particle data distributions through their covariance matrices, corresponding to the second-order moments of MD trajectory data. Discrepancies between system states are quantified using statistical distances between these covariance matrices. By applying dimensionality reduction to the resulting distance matrix, we extract lower-dimensional features that characterize the systems' dynamics. We validate the proposed method using Lennard-Jones (LJ) particle systems under different temperature conditions, as well as separate bulk systems of ice and liquid water. The results of LJ particles demonstrate an approximately linear correlation between the first principal component obtained through dimensionality reduction of the distance matrix and the diffusion coefficient. This suggests that global physical properties can be effectively inferred from local statistical information, such as covariance matrices, offering a data-efficient alternative for analyzing complex molecular systems. Furthermore, in the case of separate bulk systems of ice and liquid water, the method successfully distinguishes between the two phases, highlighting its potential for characterizing phase transitions and structural differences in molecular systems.
- 8 July 2024
- Published by American Physical Society (APS) in Physical Review E
- Vol. 110 (1) , 014701
Coarse-grained molecular simulation of the effect of liquid crystal molecular pitch on structure in cylindrical confinement
Blue phases (BPs) consist of three-dimensional self-assembled structures formed by a double-twisted columnar arrangement of liquid crystal molecules. Although their unique optical and structural properties render BPs particularly useful for applications such as liquid crystal displays, BPs typically appear in a narrow temperature range between the isotropic and nematic phases. This thermodynamic instability impedes their practical applicability. However, the simulations we present here showed that, in a quasi-one-dimensional system confined to nanospace, a phase equivalent to the BP appears and persists between the nematic and smectic phases. Confinement to a nanotube (NT) with a relatively small radius enables the BP to be maintained over a wide temperature range, whereas for an NT with a relatively larger radius, the BP appears only in a very narrow temperature range between the aforementioned phases. We additionally showed that the pitch of the BP is dependent on and can be controlled by adjusting the radius of the NTs. This finding has significant implications for the potential application of these materials in fields such as photonics and chiral separation technologies.
- 8 July 2024
- Published by American Physical Society (APS) in Physical Review E
- Vol. 110 (1) , 014701
Coarse-grained molecular simulation of the effect of liquid crystal molecular pitch on structure in cylindrical confinement
Blue phases (BPs) consist of three-dimensional self-assembled structures formed by a double-twisted columnar arrangement of liquid crystal molecules. Although their unique optical and structural properties render BPs particularly useful for applications such as liquid crystal displays, BPs typically appear in a narrow temperature range between the isotropic and nematic phases. This thermodynamic instability impedes their practical applicability. However, the simulations we present here showed that, in a quasi-one-dimensional system confined to nanospace, a phase equivalent to the BP appears and persists between the nematic and smectic phases. Confinement to a nanotube (NT) with a relatively small radius enables the BP to be maintained over a wide temperature range, whereas for an NT with a relatively larger radius, the BP appears only in a very narrow temperature range between the aforementioned phases. We additionally showed that the pitch of the BP is dependent on and can be controlled by adjusting the radius of the NTs. This finding has significant implications for the potential application of these materials in fields such as photonics and chiral separation technologies.
- Open Access
- 8 August 2022
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 23 (15) , 8807
Theoretical Design of a Janus-Nanoparticle-Based Sandwich Assay for Nucleic Acids
Nanoparticles exhibit diverse self-assembly attributes and are expected to be applicable under unique settings. For instance, biomolecules can be sandwiched between dimer nanoparticles and detected by surface-enhanced Raman scattering. Controlling the gap between extremely close dimers and stably capturing the target molecule in the gap are crucial aspects of this strategy. Therefore, polymer-tethered nanoparticles (PTNPs), which show promise as high-performance materials that exhibit the attractive features of both NPs and polymers, were targeted in this study to achieve stable biomolecule sensing. Using coarse-grained molecular dynamics simulations, the dependence of the PTNP interactions on the length of the grafted polymer, graft density, and coverage ratio of a hydrophobic tether were examined. The results indicated that the smaller the tether length and graft density, the smaller was the distance between the PTNP surfaces (). In contrast, decreased as the coverage ratio of the hydrophobic surface () increased. The sandwiching probability of the sensing target increased in proportion to the coverage ratio. At high values, the PTNPs aggregated into three or more particles, which hindered their sensing attributes. These results provide fundamental insight into the sensing applications of NPs and demonstrate the usefulness of PTNPs in sensing biomolecules.- 8 August 2022
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 23 (15) , 8807
Open AccessTheoretical Design of a Janus-Nanoparticle-Based Sandwich Assay for Nucleic Acids
Nanoparticles exhibit diverse self-assembly attributes and are expected to be applicable under unique settings. For instance, biomolecules can be sandwiched between dimer nanoparticles and detected by surface-enhanced Raman scattering. Controlling the gap between extremely close dimers and stably capturing the target molecule in the gap are crucial aspects of this strategy. Therefore, polymer-tethered nanoparticles (PTNPs), which show promise as high-performance materials that exhibit the attractive features of both NPs and polymers, were targeted in this study to achieve stable biomolecule sensing. Using coarse-grained molecular dynamics simulations, the dependence of the PTNP interactions on the length of the grafted polymer, graft density, and coverage ratio of a hydrophobic tether were examined. The results indicated that the smaller the tether length and graft density, the smaller was the distance between the PTNP surfaces (). In contrast, decreased as the coverage ratio of the hydrophobic surface () increased. The sandwiching probability of the sensing target increased in proportion to the coverage ratio. At high values, the PTNPs aggregated into three or more particles, which hindered their sensing attributes. These results provide fundamental insight into the sensing applications of NPs and demonstrate the usefulness of PTNPs in sensing biomolecules. - 9 July 2021
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 33 (36) , 365404
Effect of chemical design of grafted polymers on the self-assembled morphology of polymer-tethered nanoparticles in nanotubes
There is a clear relationship between the self-assembling architecture of nanoparticles (NPs) and their physical properties, and they are currently used in a variety of applications, including optical sensors. Polymer-tethered NPs, which are created by grafting polymers onto NPs to control the self-assembly of NPs, have attracted considerable attention. Recent synthetic techniques have made it possible to synthesize a wide variety of polymers and thereby create NPs with many types of surfaces. However, self-assembled structures have not been systematically classified because of the large number of tuning parameters such as the polymer length and graft density. In this study, by using coarse-grained molecular simulation, we investigated the changes in the self-assembled structure of polymer-tethered NP solutions confined in nanotubes due to the chemical properties of polymers. Three types of tethered polymer NP models were examined: homo hydrophilic, diblock hydrophilic–hydrophobic (HI–HO), and diblock hydrophobic–hydrophilic. Under strong confinement, the NPs were dispersed in single file at low axial pressure. As the pressure increased, multilayered lamellar was observed in the HI–HO model. In contrast, under weak confinement, the difference in the pressure at which the phases emerge, depending on the model, was significant. By changing the chemical properties of the grafted polymer, the thermodynamic conditions (the axial pressure in this study) under which the phases appear is altered, although the coordination of NPs remains almost unchanged. Our simulation offers a theoretical guide for controlling the morphologies of self-assembled polymer-tethered NPs, a novel system that may find applications in nanooptical devices or for nanopatterning.
- 9 July 2021
- Published by IOP Publishing in Journal of Physics: Condensed Matter
- Vol. 33 (36) , 365404
Effect of chemical design of grafted polymers on the self-assembled morphology of polymer-tethered nanoparticles in nanotubes
There is a clear relationship between the self-assembling architecture of nanoparticles (NPs) and their physical properties, and they are currently used in a variety of applications, including optical sensors. Polymer-tethered NPs, which are created by grafting polymers onto NPs to control the self-assembly of NPs, have attracted considerable attention. Recent synthetic techniques have made it possible to synthesize a wide variety of polymers and thereby create NPs with many types of surfaces. However, self-assembled structures have not been systematically classified because of the large number of tuning parameters such as the polymer length and graft density. In this study, by using coarse-grained molecular simulation, we investigated the changes in the self-assembled structure of polymer-tethered NP solutions confined in nanotubes due to the chemical properties of polymers. Three types of tethered polymer NP models were examined: homo hydrophilic, diblock hydrophilic–hydrophobic (HI–HO), and diblock hydrophobic–hydrophilic. Under strong confinement, the NPs were dispersed in single file at low axial pressure. As the pressure increased, multilayered lamellar was observed in the HI–HO model. In contrast, under weak confinement, the difference in the pressure at which the phases emerge, depending on the model, was significant. By changing the chemical properties of the grafted polymer, the thermodynamic conditions (the axial pressure in this study) under which the phases appear is altered, although the coordination of NPs remains almost unchanged. Our simulation offers a theoretical guide for controlling the morphologies of self-assembled polymer-tethered NPs, a novel system that may find applications in nanooptical devices or for nanopatterning.
- 8 March 2021
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 17 (15) , 4047-4058
Self-assembly of polymer-tethered nanoparticles with uniform and Janus surfaces in nanotubes
In this study, a coarse-grained molecular simulation was performed to investigate the morphologies and phase diagrams of self-assembled polymer-tethered nanoparticles (NPs) confined in nanotubes (NTs). Unlike ordinary NPs, polymer-tethered NPs have two distinct characteristic lengths, which are key factors that determine their self-assembly. Herein, two distinct types of NT walls and three types of polymer-tethered NPs were considered: hydrophilic and hydrophobic walls, and hydrophilic, hydrophobic, and Janus surfaces. First, the qualitative phase diagrams of the axial pressure, Pz, versus the ratio of the NT radius to the NP radius, L, were derived. The results revealed that diverse self-assembled morphologies, which are not formed in non-tethered NPs, were observed in the polymer-tethered NPs. For example, three types of ordered structures with different structural characteristic lengths, depending on Pz, were obtained. In addition, the effect of the chemical nature of the polymer-tethered NP surface on the self-assembled morphology confined in NTs was investigated. Clusters of water molecules were formed, particularly in the hydrophobic polymer-tethered NPs, and these clusters caused the structural distortion of the NP. Moreover, in the polymer-tethered NPs with the Janus amphiphilic surface, the hydrophobic and hydrophilic polymer tethered NPs assembled in the axial direction to form an ordered structure, and a double-helix structure was formed at L = 3.0 in the hydrophobic NT. The results of these simulations indicate that the self-assembly behaviours of polymer-tethered NPs can be qualitatively predicted based on the chemical nature of the NT walls and the surface design of the polymer-tethered NP.
- 8 March 2021
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 17 (15) , 4047-4058
Self-assembly of polymer-tethered nanoparticles with uniform and Janus surfaces in nanotubes
In this study, a coarse-grained molecular simulation was performed to investigate the morphologies and phase diagrams of self-assembled polymer-tethered nanoparticles (NPs) confined in nanotubes (NTs). Unlike ordinary NPs, polymer-tethered NPs have two distinct characteristic lengths, which are key factors that determine their self-assembly. Herein, two distinct types of NT walls and three types of polymer-tethered NPs were considered: hydrophilic and hydrophobic walls, and hydrophilic, hydrophobic, and Janus surfaces. First, the qualitative phase diagrams of the axial pressure, Pz, versus the ratio of the NT radius to the NP radius, L, were derived. The results revealed that diverse self-assembled morphologies, which are not formed in non-tethered NPs, were observed in the polymer-tethered NPs. For example, three types of ordered structures with different structural characteristic lengths, depending on Pz, were obtained. In addition, the effect of the chemical nature of the polymer-tethered NP surface on the self-assembled morphology confined in NTs was investigated. Clusters of water molecules were formed, particularly in the hydrophobic polymer-tethered NPs, and these clusters caused the structural distortion of the NP. Moreover, in the polymer-tethered NPs with the Janus amphiphilic surface, the hydrophobic and hydrophilic polymer tethered NPs assembled in the axial direction to form an ordered structure, and a double-helix structure was formed at L = 3.0 in the hydrophobic NT. The results of these simulations indicate that the self-assembly behaviours of polymer-tethered NPs can be qualitatively predicted based on the chemical nature of the NT walls and the surface design of the polymer-tethered NP.
- Open Access
- 1 January 2020
- Published by Architectural Institute of Japan in Journal of Structural and Construction Engineering (Transactions of AIJ)
- Vol. 85 (768) , 251-261
ELEMENTAL EXPERIMENT OF DISK SHEAR-KEY UNDER TENSILE FORCE AND SHEAR FORCE AND ITS SHEAR STRENGTH EVALUATION
The disk shear-key is a composite shear resistance system composed of a steel disk and an anchor bolt. The disk shear-key has high stiffness and shear strength as compared with a general post-installed anchor. In the previous study, it is suggested that the expected shear strength can not be demonstrate when tensile force acts on the disk shear-key. Therefore, in the current design and construction method for the external seismic retrofitting, the disk shear-keys are placed in the center of the span and it is assumed that the shear force is to be borne on average. Then, for the tensile force due to the eccentric moment, post-installed anchors are placed at both ends of span. In order to make effective use of the disk shear-key, it is necessary to grasp the mechanical behavior under combined stress and arrange it efficiently. Therefore, in this study, the disk shear-key was tested under cyclic shear force along with constant tensile force. In Chapter 2, the outline of the experiment is indicated. The eight specimens were built with various parameters, which is, diameter of the steel disk Rd, embedded length of the anchor bolt le, and tensile force ratio η’. Here, the tensile force ratio is the ratio of the tensile axial force to the tensile strength of the disk shear-key. The experiment results are described in Chapter 3. The shear strength of the specimens in this experiment was less than the ultimate shear strength according to the current evaluation formula. This is considered to be caused by the different loading condition in the vertical direction from the previous experiment. When the vertical stress generated at the joint surface is zero (η’=0), the shear strength of the disk shear-key can be roughly estimated by the design shear strength according to the current design evaluation formula. However, in the range of η’=0 to 0.5 conducted in this experiment, the relative horizontal displacement of joint at maximum shear strength was within 2mm, which is the allowable value of the external seismic retrofitting joints. Also, the relative vertical displacement of joint increases as the tensile force is applied. Furthermore, in the case of application to external seismic retrofitting, the relative vertical displacement becomes large even when no tensile force is applied. It is suggested that the steel disk slips out, and it is believed that the shear resistance decreases due to the strength reduction in the bearing stress area of the concrete. In addition, the curvature of the anchor bolt is maximized at the position near 2da away from the joint surface on the existing side, and the value reaches the yielding region. However, curvatures within the elastic range occur at the other measurement points, and bending deformation hardly occurs at the retrofitting part. In Chapter 4, the shear strength evaluation formula under constant tensile force was constructed. The evaluation formula was modified in consideration of slipping out of the steel disk and the reduction of restraint effect by anchor bolt due to the tensile force. It was evaluated almost accurately with the experimental results.
- 1 January 2020
- Published by Architectural Institute of Japan in Journal of Structural and Construction Engineering (Transactions of AIJ)
- Vol. 85 (768) , 251-261
Open AccessELEMENTAL EXPERIMENT OF DISK SHEAR-KEY UNDER TENSILE FORCE AND SHEAR FORCE AND ITS SHEAR STRENGTH EVALUATION
The disk shear-key is a composite shear resistance system composed of a steel disk and an anchor bolt. The disk shear-key has high stiffness and shear strength as compared with a general post-installed anchor. In the previous study, it is suggested that the expected shear strength can not be demonstrate when tensile force acts on the disk shear-key. Therefore, in the current design and construction method for the external seismic retrofitting, the disk shear-keys are placed in the center of the span and it is assumed that the shear force is to be borne on average. Then, for the tensile force due to the eccentric moment, post-installed anchors are placed at both ends of span. In order to make effective use of the disk shear-key, it is necessary to grasp the mechanical behavior under combined stress and arrange it efficiently. Therefore, in this study, the disk shear-key was tested under cyclic shear force along with constant tensile force. In Chapter 2, the outline of the experiment is indicated. The eight specimens were built with various parameters, which is, diameter of the steel disk Rd, embedded length of the anchor bolt le, and tensile force ratio η’. Here, the tensile force ratio is the ratio of the tensile axial force to the tensile strength of the disk shear-key. The experiment results are described in Chapter 3. The shear strength of the specimens in this experiment was less than the ultimate shear strength according to the current evaluation formula. This is considered to be caused by the different loading condition in the vertical direction from the previous experiment. When the vertical stress generated at the joint surface is zero (η’=0), the shear strength of the disk shear-key can be roughly estimated by the design shear strength according to the current design evaluation formula. However, in the range of η’=0 to 0.5 conducted in this experiment, the relative horizontal displacement of joint at maximum shear strength was within 2mm, which is the allowable value of the external seismic retrofitting joints. Also, the relative vertical displacement of joint increases as the tensile force is applied. Furthermore, in the case of application to external seismic retrofitting, the relative vertical displacement becomes large even when no tensile force is applied. It is suggested that the steel disk slips out, and it is believed that the shear resistance decreases due to the strength reduction in the bearing stress area of the concrete. In addition, the curvature of the anchor bolt is maximized at the position near 2da away from the joint surface on the existing side, and the value reaches the yielding region. However, curvatures within the elastic range occur at the other measurement points, and bending deformation hardly occurs at the retrofitting part. In Chapter 4, the shear strength evaluation formula under constant tensile force was constructed. The evaluation formula was modified in consideration of slipping out of the steel disk and the reduction of restraint effect by anchor bolt due to the tensile force. It was evaluated almost accurately with the experimental results.
- 1 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
EncapNet-3D and U-EncapNet for Cell Segmentation
EncapNet is a kind of Capsule network that significantly improved routing problems that has thought to be the main bottleneck of capsule network. In this paper, we propose EncapNet-3D that has stronger connection between master and aide branch, which original EncapNet has only single co-efficient per capsule. We achieved this by adding 3D convolution and Dropout layers to connection between them. 3D convolution makes connection between capsules stronger. We also propose U-EncapNet, which uses U-net architecture to achieve high accuracy in semantic segmentation task. EncapNet-3D has successfully accomplished to reduce network parameters 321 times smaller compared to U-EncapNet, 52 times smaller than U-net. We show the result on segmentation problem of cell images. U-EncapNet has advanced performance of 1.1% in cell mean IoU in comparison with U-net. EncapNet-3D has achieved 3% increase in comparison with ResNet-6 in cell membrane IoU.
- 1 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-7
EncapNet-3D and U-EncapNet for Cell Segmentation
EncapNet is a kind of Capsule network that significantly improved routing problems that has thought to be the main bottleneck of capsule network. In this paper, we propose EncapNet-3D that has stronger connection between master and aide branch, which original EncapNet has only single co-efficient per capsule. We achieved this by adding 3D convolution and Dropout layers to connection between them. 3D convolution makes connection between capsules stronger. We also propose U-EncapNet, which uses U-net architecture to achieve high accuracy in semantic segmentation task. EncapNet-3D has successfully accomplished to reduce network parameters 321 times smaller compared to U-EncapNet, 52 times smaller than U-net. We show the result on segmentation problem of cell images. U-EncapNet has advanced performance of 1.1% in cell mean IoU in comparison with U-net. EncapNet-3D has achieved 3% increase in comparison with ResNet-6 in cell membrane IoU.