Isadora Luiza Clímaco Cunha
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Isadora Luiza Clímaco Cunha has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Luiz Kulay
Department of Chemical Engineering, Escola Politécnica, Universidade de São Paulo, São Paulo 05508-010, Brazil
7 shared publications - Beatriz Arioli de Sá Teles
Chemical Engineering Department, Polytechnic School, University of São Paulo (USP), Av. Prof. Lineu Prestes, 580—Bloco 18, Sao Paulo 05508-000, Brazil
2 shared publications - Moisés Teles dos Santos
Department of Chemical Engineering, Escola Politécnica, Universidade de São Paulo, Av. Prof. Luciano Gualberto, Trav. 3, N. 380, São Paulo 05508-010, SP, Brazil
2 shared publications - Natália de Almeida Menezes
Chemical Engineering Department, Polytechnic School, University of São Paulo (USP), Av. Prof. Lineu Prestes, 580—Bloco 18, Sao Paulo 05508-000, Brazil
2 shared publications - Alfredo Felipe de Oliveira Schmitt
Instituto SustenPlást. Av. Assis Brasil, 8787, Porto Alegre 91140-001, Brazil
1 shared publication Antonio Carlos S. C. Teixeira
Research Group in Advanced Oxidation Processes (AdOx), Department of Chemical Engineering, Escola Politécnica, University of São Paulo, São Paulo, Brazil
1 shared publication
Latest Publications
- Open Access
Is Photocatalysis Ready for Scale Yet?
Despite being frequently proposed as a low-carbon solution for wastewater treatment and solar fuel production, the feasibility of photocatalytic processes in large-scale deployments remains unclear. This review evaluates the scalability of photocatalytic technologies by synthesizing a decade (2015–2025) of techno-economic analysis (TEA) and life-cycle assessment (LCA) studies. Using a systematic search and programmatic screening, 77 assessment-focused publications were identified from an initial corpus of 854 studies. Across applications, TEA and LCA consistently highlight two dominant barriers to scale-up: high electricity demand in UV-driven systems and significant cradle-to-gate impacts associated with catalyst synthesis, particularly for nanostructured materials. When solar irradiation replaces artificial light, environmental and economic hotspots shift from energy use to material production, catalyst durability, and reuse assumptions. Wide variability in reported costs and impacts reflects heterogeneous methodologies, limited pilot-scale data, and a lack of standardized reporting. Overall, assessment-based evidence indicates that photocatalysis is not yet ready for widespread industrial deployment as a large industrial process. However, continuous advances in solar-driven reactor design, low-impact and circular catalyst synthesis, hybrid process integration, and harmonized TEA/LCA frameworks could substantially improve its prospects for scalable, climate-positive implementation, especially in the context of emerging green energy alternatives.
Open AccessIs Photocatalysis Ready for Scale Yet?
Despite being frequently proposed as a low-carbon solution for wastewater treatment and solar fuel production, the feasibility of photocatalytic processes in large-scale deployments remains unclear. This review evaluates the scalability of photocatalytic technologies by synthesizing a decade (2015–2025) of techno-economic analysis (TEA) and life-cycle assessment (LCA) studies. Using a systematic search and programmatic screening, 77 assessment-focused publications were identified from an initial corpus of 854 studies. Across applications, TEA and LCA consistently highlight two dominant barriers to scale-up: high electricity demand in UV-driven systems and significant cradle-to-gate impacts associated with catalyst synthesis, particularly for nanostructured materials. When solar irradiation replaces artificial light, environmental and economic hotspots shift from energy use to material production, catalyst durability, and reuse assumptions. Wide variability in reported costs and impacts reflects heterogeneous methodologies, limited pilot-scale data, and a lack of standardized reporting. Overall, assessment-based evidence indicates that photocatalysis is not yet ready for widespread industrial deployment as a large industrial process. However, continuous advances in solar-driven reactor design, low-impact and circular catalyst synthesis, hybrid process integration, and harmonized TEA/LCA frameworks could substantially improve its prospects for scalable, climate-positive implementation, especially in the context of emerging green energy alternatives.
- 2 March 2024
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 31 (15) , 22319-22338
Bibliometric analysis of Advanced Oxidation Processes studies with a focus on Life Cycle Assessment and Costs
Advanced oxidation processes (AOPs) are wastewater treatment technologies that stand out for their ability to degrade Contaminants of Emerging Concern (CECs). The literature has extensively investigated these removal processes for different aqueous matrices. Once technically mature, some of these systems have become accredited to be applied on a large scale, and therefore, their systemic performances in the environmental and cost spheres have also become essential requirements. This study proposed corroborating this trend, analyzing the available literature on the subject to verify how experts in the AOP area investigated this integration during 2015–2023. For this purpose, a sample of publications was treated by applying the Systematic Review (SR) methodology. This resulted in an extract of 83 studies that adopted life-cycle logic to estimate environmental impacts and process costs or evaluated them as complementary to the technical dimension of each treatment technology. This analysis found that both dimensions can be used for selecting or sizing AOPs at the design scale. However, the appropriate choice of the impact categories for the environmental assessment and establishing a methodology for cost analysis can make the approach still more effective. In addition, a staggering number of processes would broaden the reality and applicability of the estimates, and adopting multicriteria analysis methodologies could address essential aspects of decision-making processes during the design of the arrangements. By meeting the original purposes, the study broadened the requirements for designing AOPs and disseminating their use in mitigating the discharge of CECs.
- 2 March 2024
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 31 (15) , 22319-22338
Bibliometric analysis of Advanced Oxidation Processes studies with a focus on Life Cycle Assessment and Costs
Advanced oxidation processes (AOPs) are wastewater treatment technologies that stand out for their ability to degrade Contaminants of Emerging Concern (CECs). The literature has extensively investigated these removal processes for different aqueous matrices. Once technically mature, some of these systems have become accredited to be applied on a large scale, and therefore, their systemic performances in the environmental and cost spheres have also become essential requirements. This study proposed corroborating this trend, analyzing the available literature on the subject to verify how experts in the AOP area investigated this integration during 2015–2023. For this purpose, a sample of publications was treated by applying the Systematic Review (SR) methodology. This resulted in an extract of 83 studies that adopted life-cycle logic to estimate environmental impacts and process costs or evaluated them as complementary to the technical dimension of each treatment technology. This analysis found that both dimensions can be used for selecting or sizing AOPs at the design scale. However, the appropriate choice of the impact categories for the environmental assessment and establishing a methodology for cost analysis can make the approach still more effective. In addition, a staggering number of processes would broaden the reality and applicability of the estimates, and adopting multicriteria analysis methodologies could address essential aspects of decision-making processes during the design of the arrangements. By meeting the original purposes, the study broadened the requirements for designing AOPs and disseminating their use in mitigating the discharge of CECs.
- Open Access
- 14 November 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (22) , 15937
Alternative Integrated Ethanol, Urea, and Acetic Acid Processing Routes Employing CCU: A Prospective Study through a Life Cycle Perspective
Despite the importance of inputs such as urea, ethanol, and acetic acid for the global production of food, energy, and chemical bases, manufacturing these substances depends on non-renewable resources, generating significant environmental impacts. One alternative to reducing these effects is to integrate production processes. This study compares the cumulative environmental performance of individual production routes for ethanol, urea, and acetic acid with that of an integrated complex designed based on Industrial Ecology precepts. Life Cycle Assessment was used as a metric for the impact categories of Global Warming Potential (GWP) and Primary Energy Demand (PED). The comparison occurred between the reference scenario, which considers individual processes, and six alternative integrated arrangements that vary in the treatment given to a stream concentrated in fuels generated in the Carbon Capture and Usage system that serves the processing of acetic acid. The study showed that process integration is recommended in terms of PED, whose contributions were reduced by 46–63% compared to stand-alone processes. The impacts of GWP are associated with treating the fuel stream. If it is treated as a co-product and environmental loads are allocated in terms of energy content, gains of up to 44% can be expected. On the other hand, if the stream is a waste, the complex’s GWP becomes more aggressive than the baseline scenario by 66%.
- 14 November 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (22) , 15937
Open AccessAlternative Integrated Ethanol, Urea, and Acetic Acid Processing Routes Employing CCU: A Prospective Study through a Life Cycle Perspective
Despite the importance of inputs such as urea, ethanol, and acetic acid for the global production of food, energy, and chemical bases, manufacturing these substances depends on non-renewable resources, generating significant environmental impacts. One alternative to reducing these effects is to integrate production processes. This study compares the cumulative environmental performance of individual production routes for ethanol, urea, and acetic acid with that of an integrated complex designed based on Industrial Ecology precepts. Life Cycle Assessment was used as a metric for the impact categories of Global Warming Potential (GWP) and Primary Energy Demand (PED). The comparison occurred between the reference scenario, which considers individual processes, and six alternative integrated arrangements that vary in the treatment given to a stream concentrated in fuels generated in the Carbon Capture and Usage system that serves the processing of acetic acid. The study showed that process integration is recommended in terms of PED, whose contributions were reduced by 46–63% compared to stand-alone processes. The impacts of GWP are associated with treating the fuel stream. If it is treated as a co-product and environmental loads are allocated in terms of energy content, gains of up to 44% can be expected. On the other hand, if the stream is a waste, the complex’s GWP becomes more aggressive than the baseline scenario by 66%.
- Open Access
- 24 October 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (21) , 15225
The Modeling and Simulation of Waste Recovery Processes Applied to the Orange Juice Industry
Orange-juice production represents a significant, world-leading economic sector in Brazil. Orange processing residues, however, correspond to 50% to 60% of the in natura fruit mass. Despite the high amount of generated waste, which is disposed of in landfills or used as raw material to produce low-value animal feed, studies on the use of this waste are still developing in Brazil. However, orange peels contain compounds that can be precursors to higher value-added products in different sectors. Therefore, this study presents a conceptual proposal for a biorefinery integrated into the orange-juice-production route to assess integrated processes’ technical, environmental, and economic performance to convert waste into chemicals, fuels, and energy. A stationary process simulation model was developed to analyze the manufacturing of four products, namely, D-limonene, pectin, biomethane, and electricity, comparing the results to the conventional feed production route according to generated revenue and environmental impacts. The results indicate that pectin production is the highest financial-return route, presenting the most significant environmental impact, whereas D-limonene production is more attractive, generating the second-highest revenue with the lowest associated environmental impacts.
- 24 October 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (21) , 15225
Open AccessThe Modeling and Simulation of Waste Recovery Processes Applied to the Orange Juice Industry
Orange-juice production represents a significant, world-leading economic sector in Brazil. Orange processing residues, however, correspond to 50% to 60% of the in natura fruit mass. Despite the high amount of generated waste, which is disposed of in landfills or used as raw material to produce low-value animal feed, studies on the use of this waste are still developing in Brazil. However, orange peels contain compounds that can be precursors to higher value-added products in different sectors. Therefore, this study presents a conceptual proposal for a biorefinery integrated into the orange-juice-production route to assess integrated processes’ technical, environmental, and economic performance to convert waste into chemicals, fuels, and energy. A stationary process simulation model was developed to analyze the manufacturing of four products, namely, D-limonene, pectin, biomethane, and electricity, comparing the results to the conventional feed production route according to generated revenue and environmental impacts. The results indicate that pectin production is the highest financial-return route, presenting the most significant environmental impact, whereas D-limonene production is more attractive, generating the second-highest revenue with the lowest associated environmental impacts.
- Open Access
Effect of Virgin PP Substitution with Recycled Plastic Caps in the Manufacture of a Product for the Telephony Sector
This study investigated the effects of partial and total substitutions of fossil polypropylene (PP) for recycled plastic cap equivalents in the manufacture of signage labels used by the telephone industry. Four alternative scenarios to using virgin PP were evaluated considering recycled material in flake and pellet forms based on environmental performance, degree of circularity, and technical behavior. The environmental analysis was performed by the life cycle assessment (LCA) technique, and for all impact categories evaluated, using recycled material to replace the virgin reduced adverse effects on the environment. The most significant results in this dimension, with gains of 81% in the Global Environmental Indicator, occurred when recycled PP flakes entirely replaced the fossil polymer. Once again, the highest values of the Materials Circularity Indicator (MCI) were achieved by scenarios with full recycled resin in processing the tags; however, this product must also be reused. The mechanical behavior of the tags measured technical performance, and in this case, the product made with virgin PP outperformed the recycled options except for elongation. An analysis that integrated the three dimensions into a single performance index pointed to the complete substitution of virgin material for recycled as the most balanced option.
Open AccessEffect of Virgin PP Substitution with Recycled Plastic Caps in the Manufacture of a Product for the Telephony Sector
This study investigated the effects of partial and total substitutions of fossil polypropylene (PP) for recycled plastic cap equivalents in the manufacture of signage labels used by the telephone industry. Four alternative scenarios to using virgin PP were evaluated considering recycled material in flake and pellet forms based on environmental performance, degree of circularity, and technical behavior. The environmental analysis was performed by the life cycle assessment (LCA) technique, and for all impact categories evaluated, using recycled material to replace the virgin reduced adverse effects on the environment. The most significant results in this dimension, with gains of 81% in the Global Environmental Indicator, occurred when recycled PP flakes entirely replaced the fossil polymer. Once again, the highest values of the Materials Circularity Indicator (MCI) were achieved by scenarios with full recycled resin in processing the tags; however, this product must also be reused. The mechanical behavior of the tags measured technical performance, and in this case, the product made with virgin PP outperformed the recycled options except for elongation. An analysis that integrated the three dimensions into a single performance index pointed to the complete substitution of virgin material for recycled as the most balanced option.
- Open Access
- 25 November 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (23) , 15734
Obtaining bioLPG via the HVO Route in Brazil: A Prospect Study Based on Life Cycle Assessment Approach
BioLPG is a partially renewable fuel that can be produced by different conversion routes, with vegetable oil hydrotreatment (HVO) being one of the most promising processes. This study uses the Life Cycle Assessment (LCA) approach to assess the environmental impacts associated with this processing. The analysis considered the conditions practiced in Brazil with soybean oil (SO) as raw material, different hydrogen sources, and raw materials’ feed rates in the reaction system. The model was based on secondary data collected for the 2020–2021 biennium, and the environmental impacts were determined for Global Warming Potential, Primary Energy Demand, Terrestrial Acidification, Fine Particulate Matter Formation, Terrestrial Ecotoxicity, and direct Land Use Change. The results show that the SO produced by soybeans grown in Paraná/BR and hydrotreated with H2 obtained by electrolysis ([SO/H2]mol/mol = 1:30) had the best environmental performance in four of the six impact categories analyzed. A complementary analysis also identified the best environmental performances for bioLPG obtained from blending SO from different sources to avoid supplier dependence. Even accumulating worse environmental performance than fossil LPG, renewable fuel has promising prospects for deployment in Brazil. Nevertheless, for this to occur, some actions must be implemented in its production cycle.
- 25 November 2022
- Published by MDPI AG in Sustainability
- Vol. 14 (23) , 15734
Open AccessObtaining bioLPG via the HVO Route in Brazil: A Prospect Study Based on Life Cycle Assessment Approach
BioLPG is a partially renewable fuel that can be produced by different conversion routes, with vegetable oil hydrotreatment (HVO) being one of the most promising processes. This study uses the Life Cycle Assessment (LCA) approach to assess the environmental impacts associated with this processing. The analysis considered the conditions practiced in Brazil with soybean oil (SO) as raw material, different hydrogen sources, and raw materials’ feed rates in the reaction system. The model was based on secondary data collected for the 2020–2021 biennium, and the environmental impacts were determined for Global Warming Potential, Primary Energy Demand, Terrestrial Acidification, Fine Particulate Matter Formation, Terrestrial Ecotoxicity, and direct Land Use Change. The results show that the SO produced by soybeans grown in Paraná/BR and hydrotreated with H2 obtained by electrolysis ([SO/H2]mol/mol = 1:30) had the best environmental performance in four of the six impact categories analyzed. A complementary analysis also identified the best environmental performances for bioLPG obtained from blending SO from different sources to avoid supplier dependence. Even accumulating worse environmental performance than fossil LPG, renewable fuel has promising prospects for deployment in Brazil. Nevertheless, for this to occur, some actions must be implemented in its production cycle.
- Open Access
A Multi-Criteria Decision-Making Approach to Evaluate Different UVC/H2O2 Systems in Wastewater Treatment
High azoxystrobin (AZO), difenoconazole (DFZ), and imidacloprid (IMD) pesticide removal rates in sixteen bench-scale experiments concerning tomato washing water treatment were obtained through a UVC/H2O2 advanced oxidative process. Experimental conditions ([H2O2]0) and irradiance (EUVC) were optimized for higher degradation rates (pseudo-first-order reaction). To consider both economic aspects and environmental impacts when defining the treatment technology, as well as technological requirements, this study applied a multi-criteria decision-making method (MCDM) to assess and differentiate similar UVC/H2O2 process configurations. This allowed for the identification of the cheapest experimental arrangement with the lowest associated environmental impacts, coupled to the highest degradation rate (kIMD). After consulting experts to determine the importance of the applied criteria and measuring alternative performances, experiment E7 ([H2O2]0 = 43.5 mg L−1; EUVC = 15.0 W m−2; kIMD = 0.236 s−1) was determined as meeting the three criteria in a balanced manner. Although E7′s technological performance regarding degradation rate did not achieve the best individual result, it presented the lowest impacts and costs among the analyzed series, although alternatives are sensitive to decision-maker priorities. This study considered different factors of a process displaying potential industrial applications still in the design stage to achieve a more efficient and balanced solution.
Open AccessA Multi-Criteria Decision-Making Approach to Evaluate Different UVC/H2O2 Systems in Wastewater Treatment
High azoxystrobin (AZO), difenoconazole (DFZ), and imidacloprid (IMD) pesticide removal rates in sixteen bench-scale experiments concerning tomato washing water treatment were obtained through a UVC/H2O2 advanced oxidative process. Experimental conditions ([H2O2]0) and irradiance (EUVC) were optimized for higher degradation rates (pseudo-first-order reaction). To consider both economic aspects and environmental impacts when defining the treatment technology, as well as technological requirements, this study applied a multi-criteria decision-making method (MCDM) to assess and differentiate similar UVC/H2O2 process configurations. This allowed for the identification of the cheapest experimental arrangement with the lowest associated environmental impacts, coupled to the highest degradation rate (kIMD). After consulting experts to determine the importance of the applied criteria and measuring alternative performances, experiment E7 ([H2O2]0 = 43.5 mg L−1; EUVC = 15.0 W m−2; kIMD = 0.236 s−1) was determined as meeting the three criteria in a balanced manner. Although E7′s technological performance regarding degradation rate did not achieve the best individual result, it presented the lowest impacts and costs among the analyzed series, although alternatives are sensitive to decision-maker priorities. This study considered different factors of a process displaying potential industrial applications still in the design stage to achieve a more efficient and balanced solution.
- Open Access
- 19 November 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (22) , 12802
Green Coalescent Synthesis Based on the Design for Environment (DfE) Principles: Brazilian Experience
Coalescents are compounds with a high potential for generating tropospheric ozone, which causes adverse effects on humans and their surroundings. This study designed a coalescent for decorative paints that reached technical levels equivalent to those obtained by StC, a product on the market, but with better environmental and economic performance. The strategy adopted in creating the green coalescent (GrC) improved film formation and reduced the product’s atmospheric emission rate. Regarding the environmental performance, GrC outperformed StC in terms of water consumption, global warming potential, and human toxicity by 30%, 35%, and 91%, but had a high smog formation potential even with a reduced loss to the air. The redesign of the molecule gave rise to AGrC, which achieved a more homogeneous environmental performance. The results of an economic analysis indicated that the procedures adopted to reduce environmental impacts could also make the coalescent more competitive if the lowest market prices were practiced. On the other hand, if the products are sold at high prices, the paint industry tends to privilege the economic dimension and disregard environmental performance for decision purposes. This research succeeded in reconciling technical functions and aspects related to sustainability to design more competitive products in the Brazilian market.
- 19 November 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (22) , 12802
Open AccessGreen Coalescent Synthesis Based on the Design for Environment (DfE) Principles: Brazilian Experience
Coalescents are compounds with a high potential for generating tropospheric ozone, which causes adverse effects on humans and their surroundings. This study designed a coalescent for decorative paints that reached technical levels equivalent to those obtained by StC, a product on the market, but with better environmental and economic performance. The strategy adopted in creating the green coalescent (GrC) improved film formation and reduced the product’s atmospheric emission rate. Regarding the environmental performance, GrC outperformed StC in terms of water consumption, global warming potential, and human toxicity by 30%, 35%, and 91%, but had a high smog formation potential even with a reduced loss to the air. The redesign of the molecule gave rise to AGrC, which achieved a more homogeneous environmental performance. The results of an economic analysis indicated that the procedures adopted to reduce environmental impacts could also make the coalescent more competitive if the lowest market prices were practiced. On the other hand, if the products are sold at high prices, the paint industry tends to privilege the economic dimension and disregard environmental performance for decision purposes. This research succeeded in reconciling technical functions and aspects related to sustainability to design more competitive products in the Brazilian market.
- 16 March 2021
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 28 (19) , 24191-24205
Degradation of pesticides present in tomato rinse water by direct photolysis and UVC/H2O2: optimization of process conditions through sequential Doehlert design
The degradation of three pesticides, azoxystrobin (AZO), difenoconazole (DFZ), and imidacloprid (IMD), commonly found in the tomato rinse water, was studied through UVC (251–257 nm) and UVC/H2O2 photolysis. The results showed that direct photolysis follows pseudo-first-order kinetics, with total AZO and IMD removals within 15 min, using 21.8 and 28.6 W m−2, respectively, while the highest percentage of DFZ degradation was 51.7% at 28.6 W m−2 UVC. The estimated quantum yields were 0.572, 0.028, and 0.061 mol Einstein−1 for AZO, DFZ, and IMD, respectively. With regard to UVC/H2O2, total pesticide removal was achieved after 10 min, while optimal treatment conditions in relation to the pesticide removal rates, estimated through the sequential Doehlert design, were about [H2O2]0 = 130 mg L−1 and 26 W m−2. Cytotoxicity and genotoxicity assays carried out with Allium cepa, for real industrial tomato rinse water sampled from washing belts did not show abnormalities during cell division, with total pesticides degradation after 15 min, demonstrating the potential application of the UVC/H2O2 process as a viable localized treatment with a focus on the possible reuse of treated water.
- 16 March 2021
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 28 (19) , 24191-24205
Degradation of pesticides present in tomato rinse water by direct photolysis and UVC/H2O2: optimization of process conditions through sequential Doehlert design
The degradation of three pesticides, azoxystrobin (AZO), difenoconazole (DFZ), and imidacloprid (IMD), commonly found in the tomato rinse water, was studied through UVC (251–257 nm) and UVC/H2O2 photolysis. The results showed that direct photolysis follows pseudo-first-order kinetics, with total AZO and IMD removals within 15 min, using 21.8 and 28.6 W m−2, respectively, while the highest percentage of DFZ degradation was 51.7% at 28.6 W m−2 UVC. The estimated quantum yields were 0.572, 0.028, and 0.061 mol Einstein−1 for AZO, DFZ, and IMD, respectively. With regard to UVC/H2O2, total pesticide removal was achieved after 10 min, while optimal treatment conditions in relation to the pesticide removal rates, estimated through the sequential Doehlert design, were about [H2O2]0 = 130 mg L−1 and 26 W m−2. Cytotoxicity and genotoxicity assays carried out with Allium cepa, for real industrial tomato rinse water sampled from washing belts did not show abnormalities during cell division, with total pesticides degradation after 15 min, demonstrating the potential application of the UVC/H2O2 process as a viable localized treatment with a focus on the possible reuse of treated water.