JNJimin Ni

Jimin Ni

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Jimin Ni has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optimization of Energy Management Strategy of a PHEV Based on Improved PSO Algorithm and Energy Flow Analysis

    by Yong Liu, Jimin Ni, Rong Huang, Xiuyong Shi, Zheng Xu, Yanjun Wang, Yuan Lu

    Single-gear-ratio plug-in hybrid vehicles (SRPHEVs) are favored by major manufacturers due to their excellent energy-saving potential, simple structure, ease of maintenance and control, great cost-saving potential, and the benefits of vehicle lightweighting. Implementing an energy management strategy (EMS) is the key to realizing the energy-saving potential of PHEVs. In this paper, based on a newly developed coaxial configuration, P1-P3 SRPHEV, with the purpose of reducing PHEV fuel consumption, the advantages of various methods were synthesized. An improved intelligent optimization algorithm, the Particle Swarm Optimization (PSO) algorithm, was used to find the optimal rule-based strategy parameters. The PSO algorithm could be easily adjusted to the parameters and obtains the desired results quickly. Different long-distance speed profiles tested under real-world driving cycle (RDC) conditions were used to validate the fuel savings. And an energy flow analysis was conducted to further investigate the reasons for the algorithm optimization. The results show that the optimization plans of the PSO algorithm in different cycle conditions can improve the equivalent fuel consumption of vehicles in different long-distance conditions. Considering the optimization effect of the equivalent fuel consumption and actual fuel consumption, the best case of the equivalent fuel consumption is improved by 2.98%, and the actual fuel consumption is improved by 2.37%. Through the energy flow analysis, it is found that the energy-saving effect of the optimization plan lies in the following principle: lowering the parallel mode switching threshold to increase the parallel mode usage time and to reduce the fuel–mechanical–electrical transmission path loss, resulting in increasing the energy utilization of the whole vehicle.


  • Open Access

    Study on Correction Method of Internal Joint Operation Curve Based on Unsteady Flow

    by Sheng Yin, Jimin Ni, Houchuan Fan, Xiuyong Shi, Rong Huang

    The turbocharger, a key component in a vehicle’s powertrain, results in insufficient accuracy if it does not fully consider the unsteady flow effects of the intake and exhaust systems. Based on the difference between the turbocharger’s actual operating performance with unsteady flow and the corresponding steady flow performance, unsteady flow correction concepts and correction methods for the compressor and turbine were put forward, and the correction of the internal joint operation curve was investigated. The results show that when unsteady correction coefficients were added to both ends of the turbocharger and the optimized structure was used at both ends, the original turbocharger’s surge margin was reduced by 4.6% to 11.8%, and that of the optimized turbocharger was reduced by 15.2% to 21.9% in the medium–low-speed range. Meanwhile, the unsteady flow energy utilization coefficient of the optimized turbocharger was more than 14.5% higher than that of the original turbocharger in the medium–low speed range, and the energy utilization advantage was obvious. It indicated that the optimized turbocharger was working earlier, and the engine’s medium–low-speed admission performance has been obviously improved. Therefore, compared with the steady curve, the corrected unsteady curve was closer to the actual engine performance.


  • Three-Dimensional Simulation Analysis of the Effect of Hydrous Ethanol and Exhaust Gas Recirculation on Gasoline Direct Injection Engine Combustion and Emissions

    by Xiuyong Shi, Yixiao Jiang, Qiwei Wang, Weiwei Qian, Rong Huang, Jimin Ni

    To analyze the influence of hydrous ethanol on the performance of the direct-injection engine, the three-dimensional simulation is carried out by using converge software coupled with the combustion mechanism of hydrous ethanol gasoline and the soot model. The combustion and soot generation characteristics of a direct-injection gasoline engine burning hydrous ethanol gasoline using exhaust gas recirculation (EGR) technology are investigated. It is found that the increase of the blending ratio of the hydrous ethanol can accelerate the flame propagation speed, shorten the combustion duration, and improve the combustion isovolumetric. The nucleation and growth of soot are jointly controlled by polycyclic aromatic hydrocarbons (PAHs) and the small molecular components such as C2H2. The oxygen content properties and high reactive OH of the hydrous ethanol-containing gasoline inhibit soot formation. Compared with pure gasoline, the carbon soot precursor mass is reduced by 60%, 54.5%, 73.3%, and 52.4% for 20% anhydrous ethanol blended with gasoline, A1, A2, A3, and A4, respectively, and the carbon soot mass is reduced by 63.6% and the carbon soot volume density is reduced by 40%. The introduction of EGR exhaust reduces the burning rate and leads to an increase in the production of carbon monoxide, hydrocarbon, and soot. However, the combination of EGR with hydrous ethanol gasoline can significantly improve the engine combustion environment and significantly reduce soot and PAHs concentrations. The impact of EGR also includes the ability to reduce combustion chamber temperatures and reduce NOx emissions from hydrous ethanol gasoline by 75%.


  • Open Access

    High temperature record for lithium-ion battery with PCM: design and simulation validation

    by Deyou Yin, Jimin Ni, Xiuyong Shi, Hehui Zhang

    Under abuse conditions, the temperature of lithium-ion battery increases rapidly and brings high safety risk. To monitor the high temperature incident of battery with a simple and reliable method, a novel design scheme was presented and validated by thermal numerical calculation, in which phase change material (PCM) block is bonded with the battery shell and gets melt down when the battery temperature exceeds its phase-transition point. The melting process is irrecoverable and can be perceived by easy visual observation. Computation results show that the temperature rising of the PCM block gets slower when it meets the melting point, but it generally increases synchronously with the shell of the battery and can be used to reflect the temperature rising of the inner cell. Thus the design scheme is valid, and may possess a good applied perspective in the after-sales maintenance and second-hand transactions of lithium-ion battery.