Xiaojun Li
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Xiaojun Li has a total of 313 co-authors. Here are the top co-authors by number of shared publications:
- Su Chen
Key Laboratory of Urban Security and Disaster Engineering of the Ministry of Education Beijing University of Technology Beijing China
13 shared publications Su Chen
Key Laboratory of Urban Security and Disaster Engineering of the Ministry of Education, Beijing University of Technology, Beijing, China
12 shared publicationsZhenghua Zhou
12 shared publications- Changsheng Jiang
Institute of Geophysics, China Earthquake Administration, Beijing 100081, China
10 shared publications - Mianshui Rong
Key Laboratory of Urban Security and Disaster Engineering of China Ministry of Education, Beijing University of Technology, Beijing 100124, China
10 shared publications - Zhifeng Ding
Institute of Geophysics, China Earthquake Administration, Beijing, China
10 shared publications
Latest Publications
- Open Access
Site Scaling Ratios for Peak Ground Accelerations (PGA) and Spectral Accelerations Based on Strong-Motion Records in Western China
The accuracy of ground motion inputs is critical for reliable seismic dynamic analysis. However, the reliability of site effect evaluation is difficult to match with structural analysis. Using 823 Chinese strong-motion records, 3687 NGA-West2 records, and statistical results from 166,700 records at 180 stations of KiK-net, this study investigated site scaling ratios of PGA and spectral accelerations in Western China. The Jaccard similarity coefficient was introduced to justify a minimum reliable sample size of 17; because most Chinese records grouped by a magnitude bin of 0.5 unit fail this criterion, influencing factors were analyzed using NGA-West2 data. Multiple linear regressions showed that earthquake magnitude and VS30 mainly control spectral shape. Site influence coefficients for PGA-normalized spectral accelerations on Chinese Site Classes II and III relative to Class I were obtained from Chinese records with a magnitude bin of 1 unit. Class IV ratios were inferred from NGA-West2 results and Chinese Class III ratios due to lack of records. Recommended PGA scaling ratios under low intensity were 1.46, 1.29, and 1.16 for Classes II, III, and IV relative to Class I, respectively. Incorporating KiK-net-derived nonlinear attenuation coefficients, new site scaling ratios accounting for nonlinearity were established. The proposed spectral ratios differed fundamentally from GB 18306, which mainly amplified medium periods (T = 0.3–2.5 s) and might be inconsistent and non-conservative.
Open AccessSite Scaling Ratios for Peak Ground Accelerations (PGA) and Spectral Accelerations Based on Strong-Motion Records in Western China
The accuracy of ground motion inputs is critical for reliable seismic dynamic analysis. However, the reliability of site effect evaluation is difficult to match with structural analysis. Using 823 Chinese strong-motion records, 3687 NGA-West2 records, and statistical results from 166,700 records at 180 stations of KiK-net, this study investigated site scaling ratios of PGA and spectral accelerations in Western China. The Jaccard similarity coefficient was introduced to justify a minimum reliable sample size of 17; because most Chinese records grouped by a magnitude bin of 0.5 unit fail this criterion, influencing factors were analyzed using NGA-West2 data. Multiple linear regressions showed that earthquake magnitude and VS30 mainly control spectral shape. Site influence coefficients for PGA-normalized spectral accelerations on Chinese Site Classes II and III relative to Class I were obtained from Chinese records with a magnitude bin of 1 unit. Class IV ratios were inferred from NGA-West2 results and Chinese Class III ratios due to lack of records. Recommended PGA scaling ratios under low intensity were 1.46, 1.29, and 1.16 for Classes II, III, and IV relative to Class I, respectively. Incorporating KiK-net-derived nonlinear attenuation coefficients, new site scaling ratios accounting for nonlinearity were established. The proposed spectral ratios differed fundamentally from GB 18306, which mainly amplified medium periods (T = 0.3–2.5 s) and might be inconsistent and non-conservative.
- 30 October 2026
- Published by Wiley in Earthquake Engineering & Structural Dynamics
Wavelet Packet‐Based Diffusion Model for Ground Motion Generation With Multi‐Conditional Energy and Spectral Matching
Temporal energy distribution strongly affects nonlinear structural response and cumulative damage. We propose a multi‐condition diffusion framework for ground‐motion synthesis that simultaneously matches temporal‐energy evolution and target response spectra. Wavelet packet decomposition is used to represent the ground‐motion signals and enables direct waveform reconstruction via orthogonal filter banks. A Transformer‐based conditional encoder with cross‐attention integrates heterogeneous conditions, including spectral ordinates, Arias intensity, temporal parameters, and Husid curves. The framework adopts the elucidating diffusion model (EDM) with second‐order Heun sampling to improve inference efficiency without sacrificing quality. Tests on the NGA‐West2 database show that explicit temporal‐energy constraints markedly improve control of energy onset and significant duration while preserving response‐spectrum agreement across repeated stochastic samples. The framework yields spectrum‐compatible ground motions with realistic energy evolution and enables conditional sample variability to be quantified through repeated stochastic sampling.
- 30 October 2026
- Published by Wiley in Earthquake Engineering & Structural Dynamics
Wavelet Packet‐Based Diffusion Model for Ground Motion Generation With Multi‐Conditional Energy and Spectral Matching
Temporal energy distribution strongly affects nonlinear structural response and cumulative damage. We propose a multi‐condition diffusion framework for ground‐motion synthesis that simultaneously matches temporal‐energy evolution and target response spectra. Wavelet packet decomposition is used to represent the ground‐motion signals and enables direct waveform reconstruction via orthogonal filter banks. A Transformer‐based conditional encoder with cross‐attention integrates heterogeneous conditions, including spectral ordinates, Arias intensity, temporal parameters, and Husid curves. The framework adopts the elucidating diffusion model (EDM) with second‐order Heun sampling to improve inference efficiency without sacrificing quality. Tests on the NGA‐West2 database show that explicit temporal‐energy constraints markedly improve control of energy onset and significant duration while preserving response‐spectrum agreement across repeated stochastic samples. The framework yields spectrum‐compatible ground motions with realistic energy evolution and enables conditional sample variability to be quantified through repeated stochastic sampling.
- 30 October 2026
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 213
Thermodynamics-informed discovery of excess pore water pressure evolution in saturated soils
- 30 October 2026
- Published by Elsevier in Soil Dynamics and Earthquake Engineering
- Vol. 213
Thermodynamics-informed discovery of excess pore water pressure evolution in saturated soils
- Open Access
Analysis of Plastic Damage in Tunnel Portal Sections Under Obliquely Incident SV Waves
The tunnel portal section is one of the most seismically vulnerable parts of a tunnel, where strong earthquakes may trigger slope instability and induce plastic damage in the tunnel lining. Based on viscous-spring artificial boundary theory, a seismic oblique-incidence method applicable to tunnel portal sections is developed by incorporating the effects of slope topography. A three-dimensional finite element model is then established to investigate the seismic response and damage mechanisms of the tunnel portal section subjected to obliquely incident SV waves. The numerical calculation results in this study indicate that fully connected plastic deformation zones eventually develop in both the original slope site and the slope site with a tunnel structure, leading to slope instability characterized by downward sliding of the rock mass along a slip surface. However, in the presence of a tunnel structure, plastic deformation initiates simultaneously at the slope toe and near the tunnel portal. The maximum plastic strain is concentrated near the tunnel portal. Both topographic amplification and the accumulation of sliding debris markedly aggravate lining damage. The seismic-wave incidence angle, ground conditions and seismic-wave spectral characteristics all have pronounced effects on plastic deformation in both the slope site and tunnel lining at the tunnel portal section. In addition, tensile damage is more pronounced and extends over a wider area than compressive damage. At shear-wave velocities of 450–550 m/s in the upper soft-rock site, the damage zone is approximately two to three times the horizontal projection length of the slope, which is identified as the primary damage zone and should be regarded as a key seismic fortification area in tunnel design.
Open AccessAnalysis of Plastic Damage in Tunnel Portal Sections Under Obliquely Incident SV Waves
The tunnel portal section is one of the most seismically vulnerable parts of a tunnel, where strong earthquakes may trigger slope instability and induce plastic damage in the tunnel lining. Based on viscous-spring artificial boundary theory, a seismic oblique-incidence method applicable to tunnel portal sections is developed by incorporating the effects of slope topography. A three-dimensional finite element model is then established to investigate the seismic response and damage mechanisms of the tunnel portal section subjected to obliquely incident SV waves. The numerical calculation results in this study indicate that fully connected plastic deformation zones eventually develop in both the original slope site and the slope site with a tunnel structure, leading to slope instability characterized by downward sliding of the rock mass along a slip surface. However, in the presence of a tunnel structure, plastic deformation initiates simultaneously at the slope toe and near the tunnel portal. The maximum plastic strain is concentrated near the tunnel portal. Both topographic amplification and the accumulation of sliding debris markedly aggravate lining damage. The seismic-wave incidence angle, ground conditions and seismic-wave spectral characteristics all have pronounced effects on plastic deformation in both the slope site and tunnel lining at the tunnel portal section. In addition, tensile damage is more pronounced and extends over a wider area than compressive damage. At shear-wave velocities of 450–550 m/s in the upper soft-rock site, the damage zone is approximately two to three times the horizontal projection length of the slope, which is identified as the primary damage zone and should be regarded as a key seismic fortification area in tunnel design.
- Open Access
- 25 June 2026
- Published by Elsevier in SSRN Electronic Journal
Ground-Motion Model for Spectral Acceleration from 0.01 to 16 s Using Fused Acceleration and Velocity Records
Most existing ground-motion models (GMMs) provide spectral acceleration (Sa) predictions only up to about 10 s, limiting their use for structures sensitive to motions at periods greater than 10 s. To address this, this study develops a record-fusion ground-motion modeling framework that covers 0.01–16 s, using 7804 collocated acceleration-velocity record pairs from 126 earthquakes in Southern California, USA. The framework integrates Bayesian optimization of fusion weights with staged GMM term search. The resulting GMM extends Sa prediction beyond 10 s and exhibits physically reasonable magnitude scaling, distance attenuation, and site-condition scaling over the modeled period range. Between-event, site-to-site, and remaining within-event residuals are generally centered near zero across all periods and show no clear systematic bias. Comparisons with four benchmark NGA-West2 GMMs indicate that, although the dataset is smaller than those used for the benchmarks, particularly for large-magnitude events, the developed GMM produces median predictions within 0.01–10 s, broadly consistent with the benchmark models. Further comparisons with observed Sa and representative earthquake cases show that predictions within 0.01–16 s remain consistent with observed trends and show no evident attenuation instability or divergence, confirming the effectiveness of the proposed framework and the stable predictive behavior of the resulting GMM across the modeled period range.
- 25 June 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessGround-Motion Model for Spectral Acceleration from 0.01 to 16 s Using Fused Acceleration and Velocity Records
Most existing ground-motion models (GMMs) provide spectral acceleration (Sa) predictions only up to about 10 s, limiting their use for structures sensitive to motions at periods greater than 10 s. To address this, this study develops a record-fusion ground-motion modeling framework that covers 0.01–16 s, using 7804 collocated acceleration-velocity record pairs from 126 earthquakes in Southern California, USA. The framework integrates Bayesian optimization of fusion weights with staged GMM term search. The resulting GMM extends Sa prediction beyond 10 s and exhibits physically reasonable magnitude scaling, distance attenuation, and site-condition scaling over the modeled period range. Between-event, site-to-site, and remaining within-event residuals are generally centered near zero across all periods and show no clear systematic bias. Comparisons with four benchmark NGA-West2 GMMs indicate that, although the dataset is smaller than those used for the benchmarks, particularly for large-magnitude events, the developed GMM produces median predictions within 0.01–10 s, broadly consistent with the benchmark models. Further comparisons with observed Sa and representative earthquake cases show that predictions within 0.01–16 s remain consistent with observed trends and show no evident attenuation instability or divergence, confirming the effectiveness of the proposed framework and the stable predictive behavior of the resulting GMM across the modeled period range.
- Open Access
Dual-Shaking Table Test of Fault-Crossing Tunnel Structure Model and Rationality Analysis of Seismic Action Modes
Earthquakes may cause severe damage to engineering structures in the seismogenic fault zone. In near-fault regions, ground motions on the two sides of a fault exhibit significant asymmetry in terms of permanent displacement, velocity pulse, and dynamic displacement amplitude. Taking the Xianglu Mountain Tunnel in the southwest of China as the engineering object, this study designed scaled fault-crossing tunnel-surrounding rock test models and conducted a series of quasi-static and dynamic model tests using a dual-shaking table system with non-uniform ground motion input. The effects of three different earthquake action modes on the responses of tunnel engineering structures crossing seismogenic faults were investigated through five static and dynamic earthquake action modes. The test results indicate that considering only the dynamic effect of ground motion or only the static effect of permanent displacement due to fault dislocation will underestimate the seismic response and damage degree of the surrounding rock and tunnel structure. However, the contribution of dynamic effects of ground motion to tunnel failure is much smaller than that of static fault dislocation. The magnitude of permanent displacement from fault dislocation, the peak displacement of non-uniform ground motion time history, and the peak relative displacement are all important factors affecting the deformation of surrounding rock and the strain of tunnel structures. Traditional static analysis methods will lead to an underestimation of the damage risk of tunnel structures. Compared with the non-uniform earthquake action mode, the deformation within the fracture zone under the static action mode is underestimated by approximately 6.39%, and the peak tensile strain under the static action mode underestimates the damage risk by approximately 40%.
Open AccessDual-Shaking Table Test of Fault-Crossing Tunnel Structure Model and Rationality Analysis of Seismic Action Modes
Earthquakes may cause severe damage to engineering structures in the seismogenic fault zone. In near-fault regions, ground motions on the two sides of a fault exhibit significant asymmetry in terms of permanent displacement, velocity pulse, and dynamic displacement amplitude. Taking the Xianglu Mountain Tunnel in the southwest of China as the engineering object, this study designed scaled fault-crossing tunnel-surrounding rock test models and conducted a series of quasi-static and dynamic model tests using a dual-shaking table system with non-uniform ground motion input. The effects of three different earthquake action modes on the responses of tunnel engineering structures crossing seismogenic faults were investigated through five static and dynamic earthquake action modes. The test results indicate that considering only the dynamic effect of ground motion or only the static effect of permanent displacement due to fault dislocation will underestimate the seismic response and damage degree of the surrounding rock and tunnel structure. However, the contribution of dynamic effects of ground motion to tunnel failure is much smaller than that of static fault dislocation. The magnitude of permanent displacement from fault dislocation, the peak displacement of non-uniform ground motion time history, and the peak relative displacement are all important factors affecting the deformation of surrounding rock and the strain of tunnel structures. Traditional static analysis methods will lead to an underestimation of the damage risk of tunnel structures. Compared with the non-uniform earthquake action mode, the deformation within the fracture zone under the static action mode is underestimated by approximately 6.39%, and the peak tensile strain under the static action mode underestimates the damage risk by approximately 40%.
- Open Access
Regularity of Cross-Fault Ground Motion Input Characteristics on the Response of Transmission Tower-Line Systems
Transmission tower-line systems spanning active faults are simultaneously subjected to the “dual characteristic seismic actions” of permanent ground displacement (PGD) and spatially varying near-fault ground motions, rendering their failure mechanisms far more complex than those under conventional site-specific seismic actions. This paper investigates a 500 kV double-circuit “two-tower, three-line” coupled system by establishing a high-fidelity finite element model. An analytical framework is proposed, centered on indexing seismic action and structural response by key parameters: “Permanent Ground Displacement–Peak Differential Displacement–Velocity Pulse Period” (“PGD–Δmax–Tp”). By employing synthesized ground motions, the displacement time history is decomposed into three components—a velocity pulse, high-frequency background noise, and permanent displacement—thereby achieving a strict decoupling of these three control variables. Based on this methodology, three sets of controlled-variable scenarios were constructed to systematically reveal the independent influence of ground motion spectral characteristics, permanent displacement, and peak differential displacement on the system’s response. The research indicates that: spectral characteristics modulate the failure mode (the whiplash effect is triggered when the period ratio μ is approximately 1–2, whereas tower leg buckling occurs when μ ≫ 1); a threshold PGD value exists that triggers a shift in the structural force-resisting mechanism; and the peak differential displacement (Δmax) causes the system’s response to transition from being dominated by conductor slackening and unloading to being governed by inertia and P-Δ effects. The insights gained into the asymmetric response characteristics of towers on opposite sides of the fault provide a quantitative reference for the revision of seismic design codes for cross-fault power transmission projects.
Open AccessRegularity of Cross-Fault Ground Motion Input Characteristics on the Response of Transmission Tower-Line Systems
Transmission tower-line systems spanning active faults are simultaneously subjected to the “dual characteristic seismic actions” of permanent ground displacement (PGD) and spatially varying near-fault ground motions, rendering their failure mechanisms far more complex than those under conventional site-specific seismic actions. This paper investigates a 500 kV double-circuit “two-tower, three-line” coupled system by establishing a high-fidelity finite element model. An analytical framework is proposed, centered on indexing seismic action and structural response by key parameters: “Permanent Ground Displacement–Peak Differential Displacement–Velocity Pulse Period” (“PGD–Δmax–Tp”). By employing synthesized ground motions, the displacement time history is decomposed into three components—a velocity pulse, high-frequency background noise, and permanent displacement—thereby achieving a strict decoupling of these three control variables. Based on this methodology, three sets of controlled-variable scenarios were constructed to systematically reveal the independent influence of ground motion spectral characteristics, permanent displacement, and peak differential displacement on the system’s response. The research indicates that: spectral characteristics modulate the failure mode (the whiplash effect is triggered when the period ratio μ is approximately 1–2, whereas tower leg buckling occurs when μ ≫ 1); a threshold PGD value exists that triggers a shift in the structural force-resisting mechanism; and the peak differential displacement (Δmax) causes the system’s response to transition from being dominated by conductor slackening and unloading to being governed by inertia and P-Δ effects. The insights gained into the asymmetric response characteristics of towers on opposite sides of the fault provide a quantitative reference for the revision of seismic design codes for cross-fault power transmission projects.
- 11 April 2026
- Published by Elsevier in Engineering Applications of Artificial Intelligence
- Vol. 176
Discovering constitutive models for clay through physics-guided symbolic regression
- 11 April 2026
- Published by Elsevier in Engineering Applications of Artificial Intelligence
- Vol. 176
Discovering constitutive models for clay through physics-guided symbolic regression
- 3 April 2026
- Published by Elsevier in Structures
- Vol. 88
Study on deformation and stress characteristics of multi-span simply supported beam bridges under normal fault dislocation
- 3 April 2026
- Published by Elsevier in Structures
- Vol. 88
Study on deformation and stress characteristics of multi-span simply supported beam bridges under normal fault dislocation